Scribd
Upload
43 views1 page

Usg Me Deflection Slotted Track - U Shape Technical Datasheet

The Deflection Track from USG ME

Uploaded by

jasimzekry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views1 page

Usg Me Deflection Slotted Track - U Shape Technical Datasheet

The Deflection Track from USG ME

Uploaded by

jasimzekry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TECHNICAL

DATASHEET
DEFLECTION SLOTTED TRS50100-090
TRACK U SHAPE Slotted
Track
Flange Width Thickness

50-100mm
Flange
50-200mm
Width

DESCRIPTION • Used in wall assemblies allowing for vertical deflection of floor beams or floor decks above the
interior partitions.
• Custom made flange width varying from 50 to 100mm suitable for vertical deflection movement
exceeding 30 mm.
• Used for a wall height which above of 3.5m.

DIMENSIONS Flange: 50mm-100mm


Width: 50mm-200mm
Thickness: 0.9mm
Perforations width: 6mm
Distance between perforations: 25.4mm

MATERIALS HDG G90 Zinc coating

STEEL GRADE Yield stress, Fy 33 ksi Ultimate

ASTM & CODE STANDARDS • USG Deflection Slotted Track is produced to meet ASTM C645 and C955
• Galvanized sheet steel meets requirements of ASTM A-653
• For installation & storage information refer to ASTM C1007 & C754

GREEN BENEFITS • LEED Credit MR 2 – USG products are manufactured from cold-formed steel. Steel is 100%
recyclable, which helps divert debris from the waste stream.
• LEED Credit MR 4 – USG’s steel products have a minimum of 25.5% postconsumer recycled
content, and 6.8% pre-consumer.

REFERENCES For further health and safety instructions, refer to the Safety Data Sheet (SDS) for this product,
available from your USG Middle East sales office or USGme.com

Disclaimer:
Information contained in this
document is subject to change
without prior notice due to our
ongoing product development. We
recommend referring to the website
usgme.com for the most up-to-date
and accurate product information.

©2024 Factory of USG


Middle East LTD. Co.
All rights reserved.

Deflection Slotted Track U Shape


Version #: 03 / Revision date: 10-January-2024 / Issue date: 26-April-2020/ Doc. Ref. MF-TDS038-3
This technical datasheet is intended for global use in regions where USG ME has authorized sales territories.

You might also like