Grade 8

Chapter – 6 Combustion and Flame

New Words

1. Combustion 6. Ignition temperature

2. Calorific value 7. Acid rain

3. Global warming 8. Inflammable substances

4. Combustible substance 9.Non- combustible substance

5. Unburnt Carbon 10. Extinguisher

Introduction

Combustion

 A chemical process in which a substance reacts with oxygen to give off heat and light is called
combustion.
 The burning of wood is an example of combustion.

Combustible and Non-Combustible Substances

 Substances which easily catch fire are combustible substances, such as paper, coal, and wood.
 Substances which do not catch fire readily are non-combustible substances, such as sand, water,
and glass.

Fuel

 Any substance, upon combustion, produces a usable amount of energy known as fuel. For
example, fossil fuels, biogas, nuclear energy, etc.
 Fuels can be solid, liquid or gas, depending on their state.
 On the basis of their occurrence, it can be either natural or artificial.

Ignition Temperature

The lowest temperature at which a combustible substance catches fire when heated in air is called its
ignition temperature.
Inflammable Substances

The substances which have very low ignition temperatures and can easily catch fire with a flame are known
as inflammable substances, for example, diesel, LPG, and acetone.

Fire

 Fire is the result of a chemical combustion reaction between oxygen and some sort of fuel.
 How long a fire lasts depends on how much fuel and oxygen are available.

Candle Flame

Fire Triangle

For the generation of fire, we need three things to be present simultaneously.

 Some sort of fuel or combustible material.

 A heat source to raise the temperature of the fuel to its ignition temperature.
 Enough oxygen to sustain combustion. So, if we remove any one of these resources, the fire can be
controlled.

Flame

 Flame is the visible and gaseous part of the fire.

 What we see as the flame is the light energy released due to the combustion of fuel.
To know more about Combustion and Flames, visit here.

Zones of Candle Flame

Structure of Flame

 The outermost zone is the hottest among all zones and is blue in colour, and this is due to complete
combustion. It is the non-luminous part of the flame.
 The middle zone of the candle flame is moderately hot and yellow in colour, and partial
combustion of fuel takes place. It is the bright part of the flame.
 The innermost zone of the flame is the least hot and is black in colour. This is due to the presence
of unburnt wax vapours.

To know more about Candle Flame, visit here.

Smoke

 Smoke is an example of solid (unburnt particles) dispersed in a gas (air).

 The black colour of the smoke is due to the presence of unburnt carbon particles in the smoke.

Matchstick

Types of Combustion

 The type of combustion in which heat and light are released in a very short span of time is called
rapid combustion. For e.g. combustion of L.P.G.
 The type of combustion in which substances catch fire on their own, without the application of heat
is termed as spontaneous combustion, for example, forest fires.
Working of a Matchstick

 The main component of the bulb of a matchstick is red phosphorus which turns into white
phosphorus on heating.
 White phosphorus spontaneously ignites, thereby increasing the temperature of the wooden stem to
the ignition point and the matchstick starts burning.

Fire Extinguisher

Fire Control

Fire can be controlled by removing any or all of the factors of combustion, i.e. fuel, oxygen (air) and
ignition temperature (by lowering the temperature).

Fire Extinguisher

 The fire extinguisher is a device used by the fire brigade to control fire.
 The role of the fire extinguishers is to cut off the supply of oxygen or bring down the temperature
of the fuel, or both.

Calorific Value

Ideal Fuel

 The ideal fuel is cheap, easily available and readily combustible.

 It has a high calorific value.
 It does not produce harmful gases or residues that pollute the environment.

Calorific Value and Efficiency of a Fuel

 The amount of heat energy produced on the complete combustion of 1 kg of a fuel is called its
calorific value. The calorific value of a fuel is expressed in a unit called kilojoule per kg (kJ/kg).
 Efficiency is the proportion of energy released by a fuel combustion process which is converted
into useful work.
 Calorific value is directly proportional to its efficiency. If the value is high, its efficiency will also
be high. If the value is low, its efficiency would also be low.

Pollution
Harmful Products from Burning of Fuel

 The burning of fuels like wood, coal and petroleum products releases unburnt carbon particles in
the air, which causes respiratory problems.
 The incomplete combustion of fuels produces a very poisonous gas called carbon monoxide.
 The burning of fuels releases carbon dioxide into the air in the environment, which causes global
warming.

Unburnt Carbon Particles

 Carbon fuels like wood, coal, candle, and petroleum release unburnt carbon particles.
 These fine particles are dangerous pollutants causing respiratory diseases, such as asthma.

CO Emission

 Carbon monoxide is a poisonous gas which is produced by incomplete combustion of fuels.

 It is dangerous to burn coal in a closed room as the carbon monoxide produced can kill people
sleeping in that room.

Global Warming

 The rise in the average temperature of the earth’s atmosphere due to the release of carbon dioxide
on combustion of fuels is termed global warming.
 Melting of polar ice caps or change in the rainfall pattern are the consequences of global warming.

Acid Rain
  Acid rains are caused by emissions of sulphur dioxide and nitrogen oxide, which react with the
water molecules in the atmosphere to produce acid.
 It has a very harmful effect on plants, land and aquatic animals and infrastructure.

CNG – The Clean Fuel

The use of diesel and petrol as fuels in automobiles is being replaced by CNG (Compressed Natural Gas)
because it is less polluting and cleaner fuel.

Recapitulation

What are the types of fire extinguishers?

The six main types of fire extinguishers are water, foam, carbon dioxide, powder, water mist and wet
chemical.

What are some of the few ‘Inflammable’ substances?

Petrol, diesel, alcohol, and liquified petroleum gas (LPG) are some of the inflammable substances.

What are the elements present in a fire triangle?

Oxygen, Heat and fuel are the elements of the Fire Triangle.

LEARN TEXTBOOK.
LEARN TEXTBOOK EXERCISE.
LEARN HAPPY LEARNING WORKSHEET.