Umar Project-1
Umar Project-1
SMART HELMET
Working • We can implement the whole circuit into small VLSI chip
v The smart helmet, which gives the three main things as first is user or that can be embedded into the helmet and bike unit.
biker have to wear helmet or not, second is alcohol detected or not, and
• It can be designed for less power consuming safety system.
third one is Helmet as a key.
vWe use the alcohol sensor it detects the alcohol and if it is more than • This safety system technology can further be enhanced in car
predicted value it will block the ignition. or other vehicle by replacing the helmet with seat belt.
v This smart bike helmet system has two modules, one on the helmet and
another on the bike. These two modules are communicated wirelessly
using RF module.
vWe place sensors in helmet which is connected to Arduino board. The
Future Scope
• We can implement various bioelectric sensors on the helmet to measure various
first motive of this smart helmet is to provide rider safety.
activities.
v 1. transmitter and 2. receiver. Once activated the transmitter sends a
control signal to the receiver circuit and activates the relay which is • We can use small camera for the recording the drivers activity. It can be used for
connected to the bike’s ignition circuit’s power supply.
passing message from the one vehicle to another vehicle by using wireless
transmitter
Cost Table • GPS can be used to track the location of an accident.
Sr. no. component Price • In future, we have planned to construct our intelligent system at a compact size
1. Arduino nano 1450 and additionally as globally acceptable to avoid accidents because of bikes.
2. Relay module 350
SUBMITTED BY
• KURESHI UMARKHAIYYAM IMRAN BHAI En NO : 206310309036
• NAYI SOHAM RASIK BHAI EN NO : 206310309006 GUIDED BY.
• SOLANKI SMIT JAGDISH BHAI EN NO : 206310309041 MANOJ S. PATEL
• PRAJAPATI PRINCE KUMAR VISHNU BHAI EN NO : 206310309031