BLUETOOTH APPLICATION

SUBMITTED BY

TIRUMALA ENGINEERING COLLEGE

( Approved by AICTE and Affiliated to JNTUK, Kakinada ) Presented by
P.PALLAVI DUTT

3/4 B-TECH [email protected]

ABSTRACT In the current scenario the world is plagued by accidents which are primarily due to human errors in judgment and hence thousands of lives are lost. These accidents can be avoided if only there was a mechanism to alert the driver of approaching danger. This can be done by monitoring the distance between nearby cars and alerting the driver whenever the distance becomes too short. This is precisely the aim of this paper. In this paper we propose the use of

Bluetooth Technology by which we can check the speed of the car whenever it comes dangerously close to any other

vehicle up front, thereby saving very many lives. enabled devices in two cars the devices

CONTENTS:
INTROD UCTION: 1. ROAD ACCIDENT STATISTICS AND OPERATION 2.AUTOMATICBRAKING SYSTEM 3.REPRESENTATION IDEA OF OUR

automatically communicate with each other when they come in the range of up to 100 meters of each other. The range is dependant on the power class of the product. Power transmission rates vary in many Bluetooth devices depending upon the power saving features available in a particular unit, bandwidth requirements, transmission distance. The statistics of road accidents is tremendous and highlights the need for such a system. The following is a statistic on the number of road accidents occurring each year.

INTRODUCTION
Since Bluetooth devices are capable of communicating with eight other devices simultaneously we can monitor and check the speeds of up to eight cars simultaneously, thus preventing accidents. Thus if we have two Bluetooth

ROAD ACCIDENT STATISTICS OF INDIA 1970-2003

Sl.No. Year Total No. of Total No. of Road Persons Killed Accidents (in (in numbers) numbe rs) 3 1970 1980 1990 1991 1992 1993 1994 1995 114100 153200 282600 295131 275541 284646 325864 351999 4 14500 24000 54100 56278 60113 60380 64463 70781 Total number No. of No. of Persons of Registered Accidents per Killed per ten Motor Vehicles ten thousand thousand (in thousands) Vehicles Vehicles 5 1401 4521 19152 21374 23507 25505 27660 30295 6 814.42 338.86 147.56 138.08 117.22 111.60 117.81 116.19 7 103.50 53.09 28.25 26.33 25.57 23.67 23.31 23.36

1 1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

1996 1997 1998 1999 2000 2001 2002 2003

371204 373671 385018 386456 391449 405637 407497 406726

74665 76977 79919 81966 78911 80888 84674 85998

33786 37332 41368 44875 48857 54991 58924 67033

109.87 100.09 93.07 86.12 80.12 73.76 69.16 60.68

22.10 20.62 19.32 18.27 16.15 14.71 14.37 12.83

Source: Data received from States/UTs.

Fig 1

OPERATION
Because of traveling at high speeds there is a possibility of having accident. The figure 2 shows that when two cars or more come within the distance of 10 km at high speeds there is a possibility of having

accidents. The Bluetooth radio is a short distance, low power radio operating in the unlicensed spectrum of 2.4 GHz and using a nominal antenna power of 20 dBm.

P R O 'S ES N K LD IL E

40 5 40 0 30 5 30 0 20 5 20 0 10 5 10 0 5

MINI COMPUTER INSIDE THE CAR CAR 4

CAR 3

CAR 5

CAR 2

CAR 1

CAR 6 CAR 7

CAR 8

Fig 2 At the 20 dB the range is 100 meters, meaning equipment must be Within 100 meters to each other (about 328 feet) to communicate using the Bluetooth standard. With the help of this technology we can send data to the eight devices. The group of eight devices is known as piconet. Here we have a piconet and a scatternet, in the piconet M is the master and S1 to S7 are the slaves

M2 M S 7 2 2 2 2 2 2 2 S1

S2

S 1

M1/S

M1 S1 S1/S3 S3

Fig 3

Radio communication is subjected to noise and interference, as the 2.4 GHz frequencies are shared between the all device in piconet. So the

Bluetooth specification has solved this problem by employing what is called as spectrum spreading, in which the Bluetooth radio hops among different

frequencies very quickly. There are 79 hops starting at 2.402 GHz and stopping at 2.480 GHz, each of which is displaced by 1 MHz. The Bluetooth avoids interference by hoping around these 79 frequencies 1600 times per second.

So in order to avoid it we use bluetooth equipped car, in which each car have bluetooth transmitter and receiver. And the every car should have mini computer to monitor the relative position of the car with the other car.

Fig 4

When any car comes close together bluetooth device sends warning signal to the car. Based on the type of warning signal received the computer sends signal to the brake control system to slow down

the speed of the car. There are two types of control signals. First type of signal control the speed of the car and the second type of signal is to overtake the car which is moving forward.

SCHEMATIC DIAGRAM OF CAR:

Fig 5 5

AUTOMTIC BRAKE SYSTEM: The automatic brake system is the next generation braking system for controlling the speed of the car. On receiving the control signal from the traveling car the

computer inside the car manipulates the signal and gives control signal to the braking system. There are four main components to an automatic braking system: Fig 6

speed sensors pump valves controller

Automatic breaking pumps and valves

The computer constantly monitors the distance between each of these cars and when it senses that the car is getting too close it moves the hydraulic valves to increase the pressure on the braking circuit, effectively increasing the braking force on the wheels. If the distance between two vehicle is within the 100m the Bluetooth devices get enabled and if the distance come closer within 10m the automatic braking system takes the control. After the speed of the car is reduced and distance increased the hydraulic valves decreases the pressure on the

braking circuit, thus effectively decrease the braking force on the wheels. The following steps show the various functions of the hydraulic valves: in position one, the valve is open; pressure from the master cylinder is passed right through to the brake. in position two, the valve blocks the line, isolating that brake from the master cylinder. This prevents the pressure from rising further should the driver push the brake pedal harder. in position three, the valve releases some of the pressure from the brake.

REPRESENTATION OF OUR IDEA

In the figure 7 when car A and car B come within the range of 100m both the Bluetooth devices get enabled and if any one of the car comes too fast then the Sends warning signal

bluetooth device sends a warning signal to the other car and it processes the signal and gives it to the automatic braking system. Receives signal and control the speed of car

Within 10m

CONCLUSION:
The Bluetooth

Fig 7

Bluetooth communication device will thus be a small, low powered radio in a chip that will talk to other Bluetooth enabled products. Bluetooth has been designed to solve a number of connectivity problems experienced by the mobile workers & consumers. Thus, this technology helps make the electronic devices more user friendly and helps address various other problems like accidents.

technology is being widely adopted by the Industry leaders. The possibility for new applications is very exciting with this Versatile technology. It provides a simple, logical answer to all the Problems-which is built a single common radio into every mobile computer, then neither do companies have to worry about WAN, nor do communication companies need to worry about building external cables. The