SAFETY DATA SHEET Version 6.

4
Revision Date 05.08.2022
according to Regulation (EC) No. 1907/2006 GENERIC EU MSDS - NO COUNTRY SPECIFIC DATA - NO OEL DATA

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifiers
Product name : HEDP

REACH No. : A registration number is not available for this substance as the
substance or its uses are exempted from registration, the
annual tonnage does not require a registration or the
registration is envisaged for a later registration deadline.
CAS-No. : 2809-21-4
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances
1.3 Details of the supplier of the safety data sheet
Company : CHANGZHOU SMART SOURCE INTERNATIONAL CO., LTD
605,Block #16-1, Landsea Green Town,
Xinbei District,
Changzhou 213022,
Jiangsu, China

Telephone : +86 519-85263898

Fax : +86 519-85263899
1.4 Emergency telephone number
Emergency Phone # : +86 13585350839

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Corrosive to metals (Category 1), H290
Serious eye damage (Category 1), H318
For the full text of the H-Statements mentioned in this Section, see Section 16.
2.2 Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram

Page 1 of 8
 Signal word Danger
Hazard statement(s)
H290 May be corrosive to metals.
H318 Causes serious eye damage.
Precautionary statement(s)
P280 Wear eye protection/ face protection.
P305 + P351 + P338 + IF IN EYES: Rinse cautiously with water for several minutes.
P310 Remove contact lenses, if present and easy to do. Continue
rinsing. Immediately call a POISON CENTER/doctor.
Supplemental Hazard none
Statements
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.

SECTION 3: Composition/information on ingredients

3.2 Mixtures
Synonyms : 1-Hydroxyethylidenediphosphonic acid
1-Hydroxyethane-1,1,-diphosphonic acid

Formula : C2H8O7P2
Molecular weight : 206,03 g/mol
Component Classification Concentration
Etidronic acid
CAS-No. 2809-21-4 Met. Corr. 1; Acute Tox. 4; >= 50 - < 70
EC-No. 220-552-8 Eye Dam. 1; H290, H302, %
H318

For the full text of the H-Statements mentioned in this Section, see Section 16.

SECTION 4: First aid measures

4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

Page 2 of 8
 If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult
a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section
2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available

SECTION 5: Firefighting measures

5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides, Oxides of phosphorus
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
No data available

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid breathing vapours, mist or gas. Ensure adequate
ventilation. Evacuate personnel to safe areas.
For personal protection see section 8.
6.2 Environmental precautions
Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in
suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage

7.1 Precautions for safe handling
Avoid inhalation of vapour or mist.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage. Store in cool place.
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

Page 3 of 8
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Components with workplace control parameters
8.2 Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and at the end of workday.
Personal protective equipment

Eye/face protection
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye
protection tested and approved under appropriate government standards such as
NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove
removal technique (without touching glove's outer surface) to avoid skin contact
with this product. Dispose of contaminated gloves after use in accordance with
applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of Regulation (EU)
2016/425 and the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail
[email protected], test method: EN374
If used in solution, or mixed with other substances, and under conditions which
differ from EN 374, contact the supplier of the CE approved gloves. This
recommendation is advisory only and must be evaluated by an industrial hygienist
and safety officer familiar with the specific situation of anticipated use by our
customers. It should not be construed as offering an approval for any specific use
scenario.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must
be selected according to the concentration and amount of the dangerous substance
at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-
face respirator with multi-purpose combination (US) or type ABEK (EN 14387)
respirator cartridges as a backup to engineering controls. If the respirator is the sole
means of protection, use a full-face supplied air respirator. Use respirators and

Page 4 of 8
 components tested and approved under appropriate government standards such as
NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

SECTION 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties
a) Appearance Form: liquid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting No data available
point/freezing point
f) Initial boiling point No data available
and boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, No data available
gas)
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: No data available
n-octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
9.2 Other safety information
No data available

SECTION 10: Stability and reactivity

10.1 Reactivity
No data available

Page 5 of 8
10.2 Chemical stability
Stable under recommended storage conditions.
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
Corrosive in contact with metals
10.4 Conditions to avoid
No data available
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides, Oxides of
phosphorus
Other decomposition products - No data available
In the event of fire: see section 5

SECTION 11: Toxicological information

11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Acute toxicity estimate - > 2.000 mg/kg
(Calculation method)
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
Risk of serious damage to eyes.
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity

No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: SZ8562100
To the best of our knowledge, the chemical, physical, and toxicological properties have not
been thoroughly investigated.

Page 6 of 8
SECTION 12: Ecological information
12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
12.6 Other adverse effects
No data available

SECTION 13: Disposal considerations

13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Waste material
must be disposed of in accordance with the Directive on waste 2008/98/EC as well as
other national and local regulations. Leave chemicals in original containers. No mixing
with other waste. Handle uncleaned containers like the product itself.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information

14.1 UN number
ADR/RID: 3265 IMDG: 3265 IATA: 3265
14.2 UN proper shipping name
ADR/RID: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Etidronic acid)
IMDG: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Etidronic acid)
IATA: Corrosive liquid, acidic, organic, n.o.s. (Etidronic acid)
14.3 Transport hazard class(es)
ADR/RID: 8 IMDG: 8 IATA: 8
14.4 Packaging group
ADR/RID: III IMDG: III IATA: III
14.5 Environmental hazards
ADR/RID: yes IMDG Marine pollutant: yes IATA: no
14.6 Special precautions for user
No data available

Page 7 of 8
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
REACH - Restrictions on the manufacture, :
placing on the market and use of certain
dangerous substances, preparations and articles
(Annex XVII)

15.2 Chemical safety assessment

For this product a chemical safety assessment was not carried out

SECTION 16: Other information

Full text of H-Statements referred to under sections 2 and 3.
H290 May be corrosive to metals.
H302 Harmful if swallowed.
H318 Causes serious eye damage.
Further information
The above information is believed to be correct but does not purport to be all inclusive
and shall be used only as a guide. The information in this document is based on the
present state of our knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any guarantee of the properties of
the product.

Page 8 of 8