ADAS CALIBRATION

Version 2024.09.17 – Prices on request

www.beissbarth.com
ADAS CALIBRATION Without wheel aligner BEISSBARTH Version 2024-09-17

BBFAS 415
Beissbarth BB FAS 415 - the flexible front camera calibration device for multi-brand system solutions
Article number: 8 900 380 008

Front camera calibration with BBFAS 415 calibration

device: Flexible, easy and precise

static calibration of cameras e.g. Lane departure cameras,

multifunction cameras
Wide vehicle coverage through optional calibration Targets
Fast, easy alignment to the vehicle's symmetrical axis or on to
ground markings
Alignment on to the vehicles track-width with optional
accessories possible at any time
Horizontal levelling according to precision spirit levels via three
height-adjustable feet
Precision crossbeam with slidingplate and fine adjusting screw
Magnetic holding fixture for multi-brand calibration plates
High power line laser module with low laser class (1M). Green
laser diodes are particularly well visible to the human eye
because the eye has its maximum spectral sensitivity in the
green range.
Optional: Compact storage box for modular calibration boards

Note: For adjusting the driver assistance systems, an OBD

diagnostic device is also required

Scope of delivery:

Precision crossbar with 2 magnetic sliding-plates for mounting

of calibration Targets
4-wheel trolley with stable column for holding the crossbar
Line laser module for aligning the calibration device
Ruler for height adjustment

Note: Necessary calibration targets are not included

Changes reserved 3
ADAS CALIBRATION Without wheel aligner BEISSBARTH Version 2024-09-17

Distance measurement laser for BB FAS 415

Article number: 8 900 381 005

Changes reserved 4
ADAS CALIBRATION Without wheel aligner BEISSBARTH Version 2024-09-17

P-Assist
Article number: 8 900 381 138

P-Assist wheel stands: Front and rear wheel stands for P-

Assist laser alignment system for alignment to wheel-track.

Changes reserved 5
ADAS CALIBRATION Without wheel aligner BEISSBARTH Version 2024-09-17

Positioning target
Article number: 8 900 381 292

Target panel for roof antennas for alignment with the vehicle's
longitudinal axis

Changes reserved 6
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

2-in-1 XXL calibration board | for VW front camera and multi-brand radar | Q.DAS
2-in-1 XXL calibration board with the pattern for calibrating front camera systems on VW Group vehicles. The newly reworked version in combination with Q.DAS allows users to also calibrate radar
systems on all vehicles that require an even reflective service in front of the radar sensor. This enables radar calibration also on vehicles outside the VW Group.
Article number: 8 900 381 056

2-in-1 XXL calibration board with the pattern for calibrating front
camera systems on VW Group vehicles. The newly reworked
version in combination with Q.DAS allows users to also calibrate
radar systems on all vehicles that require an even reflective
service in front of the radar sensor. This enables radar calibration
also on vehicles outside the VW Group.Single and double radar
systems can be calibrated in the lowest height position, without
any setup times or rotation of the target board. The height is
infinitely adjustable to cover both low positioned radar systems
as well as high positioned camera systems with only one
calibration board.The purchase of the XXL calibration board does
not require any further ACC reflector mirrors (8 900 381 150) for
radar calibration! The required tilting positions are also possible
with the XXL calibration board.Advantages:

Camera calibration for VW Group vehicles and multi-brand

OEM radar calibration in one
No setup times, no rotation
For single and double radars
For passenger cars and transporter (very high transporters
may only work in combination with Q.DAS Pro)
Integrated tilting mechanism with 3 positions
High quality materials and finishing with flat surface guarantee

Note: Only in combination with the Q.DAS frame.

Changes reserved 7
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

eTarget Kit | Digital 15-in-1 solution

15-in-1 calibration patterns in one eTarget for faster and error-free target board selection.
Article number: 8 900 380 011

eTarget: fast and space-saving solution for workshops – broad

manufacturer coverage includedeTarget is an innovative digital
calibration target based on e-paper technology - unlike
conventional monitors, beamers or other screen solutions.OEM-
compliant calibration targets for precise and fast ADAS
calibration with Q.DAS:

Faster setup times, more space: 15 patterns in one eTarget

Automatic pattern selection minimizes user errors
Extremely high contrast, even from different viewing angles
Reflective technology for all lighting conditions
Integrated Bluetooth module for app communication
Lightweight and robust housing
Downward compatible with previous Beissbarth calibration
solutions (BBFAS 1xxx, BBFAS 415)
Battery operated and power saving – display is maintained
even without power

Scope of deliveries:

2x eTarget with charging cable

1x Universal Type 4S (8 900 382 570)

Note: Automatic target selection requires active license for

Q.mApp software.

Changes reserved 8
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Multi-Target starter kit 1

For articles to be ordered, see configuration. | Article number: 8 900 381 001

Multi-Target starter kit 1 with storagebox

Targets included:

Nissan Set 1 (8 900 381 139)

Toyota (8 900 382 287)
Mercedes 1 / Infiniti 2 (8 900 382 312)
Mazda 1 (8 900 382 318)
Honda 3 (8 900 382 349)
Toyota 3 (8 900 382 355)
Universal Target 1 (8 900 382 570)

Changes reserved 9
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Multi-Target starter kit 2

For articles to be ordered, see configuration. | Article number: 8 900 381 002

Multi-Target starter kit 2 with storagebox

Targets included:

Mercedes 1 / Infiniti 2 (8 900 382 312)

Mercedes 2 (8 900 382 319)
Universal Target 1 (8 900 382 570)

Changes reserved 10
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target set Nissan type 1

Article number: 8 900 381 139

Nissan

Qashqai [J11] year from 2013 to 2017-09

Qashqai Facelift [J11] year from 2017-10
X-Trail / Rouge [T32] Facelift year from 2017

Changes reserved 11
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target set Nissan type 2

Article number: 8 900 381 140

Infiniti

QX60 formerJX [L50]

QX70 [Y51] = FX_Serie year from 2013

MERCEDES-BENZ

X-Klasse [470, 471) year from 2017

Nissan

Altima [L34] year from 2019

Leaf [ZE1] year from 2018
Maxima [A36] year from 2016
Maxima [A36] year from 2015 to 2016
Micra [K14] year from 2017
X-Trail / Rouge [T32] year from 2013 to 2016

Changes reserved 12
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target set Honda type 1

Article number: 8 900 381 143

Honda [EU]

Jazz / Fit [GK] year from 2015

Civic (9) year from 2012 to 2016
Civic Typ KG : year from 2016 to 2017
HR-V [RU] year from 2015

Honda [US]

Accord US year from 2013 to 2015

Civic (5 door) year from 2016 to 2017
Civic (Hybrid) year from 2012 to 2015
CR-V year from 2017
HR-V year from 2016 to 2017

Changes reserved 13
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Honda type 2

Article number: 8 900 382 297

Changes reserved 14
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Honda type 3

Article number: 8 900 382 349

Honda [EU]

Accord (9) [CR] year from 2014

Civic Non KG: year from 2016 to 2017
CR-V (4) [RM] year from 2012 to 2015
CR-V (4) [RM] year from 2015 to 2017

Changes reserved 15
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Mazda type 1

Article number: 8 900 382 318

MAZDA

CX 3 [DK] year from 2015

CX 5 [KE] year from 2012 to 2016
CX 9 [TB]
MX5 [ND]
Serie-2 [DJ, DL]
Series-3 [BM] year from 2013 to 2016-05
Series-6 [GJ] year to 2016

Changes reserved 16
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target set Mazda type 2

Article number: 8 900 381 234

MAZDA

CX 5 [KF] year from 2017

Series-3[BN] year from 2016-06
Series-6 [GL] year from 2017

Changes reserved 17
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target set Mitsubishi type 1

Article number: 8 900 381 218

MITSUBISHI

ASX / Outlander Sport [GA] year from 2018

Eclipse Cross [GK] year from 2018
Outlander III Facelift / PHEV year from 2017

Changes reserved 18
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Toyota type 1

Article number: 8 900 382 287

LEXUS

ES300h ES450h [V6#] year from 2012 to 2015

GS-F, GS200t, GS250, GS300h GS350 GS450h [L1#] year
from 2012
LS460, LS600h [F4#] year from 2007
NX200 NX300h [Z1#]
RC-F, RC200t, RC350 [C1#] year from 2014

TOYOTA

Auris / Corolla [E18#] with SafetySense 3-Step year from 2015

to 2018
Avensis [T27#] with SafetySense 3-Step year from 2015
Aygo [B4#] with SafetySense 3-Step year from 2015
Camry [V5#] year from 2014
C-HR X10/X50 year from 2017
Highlander, Kluger [U5] year from 2013
Mirai [JPD10] year from 2015
Prius [W30] Prius [W40] year from 2009 to 2015
RAV4 [A4] year from 2012 to 2015
Verso [R2#] with SafetySense 3-Step year from 2016
Yaris [P13#] with SafetySense 3-Step year from 2015 to 2017
Yaris [P13#] with SafetySense 3-Step year from 2017

Changes reserved 19
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Toyota type 2

Article number: 8 900 382 328

CITROEN

C1 [B4] year from 2014

PEUGEOT [EU]

108 [B3]

TOYOTA

Auris / Corolla [E18#] with SafetySense 1-Step year from 2015

to 2018
Avensis [T27#] with SafetySense 1 -Step year from 2015
Aygo [B4#] with SafetySense 1-Step year from 2015
Verso [R2#] with SafetySense 1-Step year from 2016
Yaris [P13#] with SafetySense 1-Step year from 2015 to 2017
Yaris [P13#] with SafetySense 1-Step year from 2017

Changes reserved 20
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Toyota type 3

Article number: 8 900 382 355

LEXUS

ES300h ES450h [V6#] year from 2015

IS200t IS300h IS350 [E3#]
LS500h LS600h [F5#] w Mono-Front-Camera year from 2017
LS500h LS600h [F5#] w Stereo-Front-Camera year from 2017
LX570 [J20] year from 2007
RX200t, RX350, RX450h, [L2#] year from 2015-09

TOYOTA

Hilux_[N12, N13] year from 2015

Prius [W50] year from 2015
RAV4 [A4] year from 2015 to 2018

Changes reserved 21
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Subaru type 2S

With slot for the alignment laser
Article number: 8 900 382 608

SUBARU

Forester G3 (AUS), [SH /S13] year from 2012

Forester G4 (AUS), [SJ] year from 2014
Impreza G4 (AUS), [GJ,GP/G23] year from 2011 to 2015
Legacy [BM,BR / B13] year from 2012
Outback [BR / B14] year from 2012 to 2015
XV / Crosstrek [GP, G33] year from 2011 to 2015

Changes reserved 22
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Subaru type 3S

With slot for the alignment laser
Article number: 8 900 382 590

SUBARU

Impreza G4, [GJ,GP/G13] year from 2011 to 2017

Impreza G5 , [GK,GT] year from 2018
Legacy [BN,BS] year from 2014
Levorg [GP / V10,VM] year from 2014
Liberty (au) [BN] year from 2014
Outback [BR / B14] year from 2015
Outback [BS /B15] year from 2014
WRX [VA /V10] year from 2014
XV / Crosstrek [GP, G33] year from 2015

Changes reserved 23
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Kia / Hyundai type 2

Article number: 8 900 382 320

Hyundai

H350 [EU] year from 2015

Changes reserved 24
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Kia / Hyundai type 3

Article number: 8 900 382 316

Hyundai

Equus [VI] year from 2016

Genesis [BH] year from 2011 to 2014
SantaFe [DM] Grand-SantaFe [NC] Sport-SantaFe MaxCruise
[NC] year from 2015

KIA

Cadenza / K7 [VG] year from 2009 to 2016

Sorento [XM] year from 2009 to 2015

Changes reserved 25
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Mercedes/Infinity type 1

Calibration target for Mercedes (passenger cars)
Article number: 8 900 382 312

MERCEDES-BENZ

A-Klasse [176] year from 2012 to 2018

B-Klasse [246] year from 2011-11 to 2018-11
C-Klasse [204] +Facelift year from 2007 to 2014
C-Klasse [205] year from 2014
CL [216] year from 2006 to 2013
CLA [117] year from 2013 to 2019
CLS [218] year from 2011 to 2018
E-Klasse [212] year from 2012 to 2016
E-Klasse [213] year from 2016
E-Klasse Coupe [207] year from 2009 to 2016
E-Klasse Coupe [238] year from 2016
GLA [156] year from 2013 to 156]
GLC [253] year from 2015
GLE [292] year from 2015 to 2019
GLK [204] + Facelift year from 2008 to 2015
M-Klasse (GL-Klasse) GLE, GLS [166] Camera system 4.0.1
year from 2011 to 2015
M-Klasse (GL-Klasse) GLE, GLS [166] Camera system 4.0
year from 2011 to 2015
M-Klasse [GL-Klasse) [164] year from 2006 to 2012
S-Klasse [221] year from 2005 to 2013
S-Klasse [222] year from 2013
S-Klasse Coupe [217] year from 2014 to 217]
SLK, SLC [172] year from 2011
SL-Klasse [231] year from 2012
SLR [190] year from 2014 to 2016
V-Klasse[447] / Vito [448] year from 2014

Changes reserved 26
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Mercedes / Infinity type 2

Calibration target for Mercedes (Sprinter) / Infinity
Article number: 8 900 382 319

MERCEDES-BENZ

Sprinter [W909] year from 2013 to 2019

Sprinter 2500 / 3500 [W906] year from 2006 to 2013

VOLKSWAGEN

Crafter [2E,2F] year from 2016 to 2017

Changes reserved 27
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target Universal type 6S

With slot for the alignment laser
Article number: 8 900 382 571

CITROEN Optima [TF] year from 2015

Rio (YB) year from 2017
C3 Aircross [A88] year from 2017 Sorento [UM] year from 2015
DS3 Crossback [D34] year from 2019 Soul [PS] E-Soul year from 2015
DS7 Crossback [X74] year from 2017
Jumper 3 / Relay 3 [U9] year from 2014 OPEL

FIAT Crossland X year from 2017

Grandland X year from 2018
500X [334] year from 2015
Ducato year from 2014 PEUGEOT [EU]

Hyundai 3008 II year from 2018

508 II year from 2018
Elantra [ADA] year from 2017 Boxer-3 / Manager [U9]
Genesis [DH] year from 2014
i10 [IA] year from 2017 TESLA
i20, i20 Active [GB] year from 2015
i30 [GD] year from 2015 Model S year from 2016-10
i30 [PDE] year from 2017 Model X year from 2016-10
i40 [VF] year from 2012
IONIQ [AE-HEV] year from 2017
SantaFe[DM] year from 2016
Sonata [LFA] year from 2016
Tucson [TL] year from 2016

Jeep

Renegade [BU] year from 2015

KIA

Cadenza / K7 [YG] year from 2016

Carens / Rondo [RP] year from 2014
Ceed / Pro Ceed [JD] year from 2013
Niro [DE] E-Niro year from 2017
Optima [JF] year from 2016

Changes reserved 28
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Calibration target set Universal type 2

Article number: 8 900 381 142

NISSAN

Cima; Fuga [Y51] = Infinity Q70

NV400 [X62]
Patrol [Y62] year from 2010

OPEL

Movano-B

RENAULT

(Grand) Espace V [xFC] year from 2015

(Grand) Scenic III [J95] year from 2012
Kadjar [HL/ HZH, HFE] year from 2015 to 2018
Koleos II [HZG, HZJ] year from 2016
Master III [x62] year from 2010
Megane III [x95] year from 2008
Megane IV [xFB] year from 2016
Talisman [xFD] year from 2015
Twingo III [B07] year from 2014

SMART

ForFour [543.0] year from 2014

ForTwo [543-3-4] year from 2014

Changes reserved 29
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

Target storage box empty

Article number: 1 690 381 217

Empty storagebox for storing the multi brand targets for front
camera calibration.

Changes reserved 30
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

ACC reflector mirror | for radar calibration

ACC reflector mirror for adjusting the ACC sensor.
Article number: 8 900 381 150

Changes reserved 31
ADAS CALIBRATION Target Shop BEISSBARTH Version 2024-09-17

BBFAS 1415
Article number: 8 900 380 007

Comprehensive coverage of the front camera calibration will

be achieved by upgrading the system with the BBFAS 1415.
In combination with the optional calibration targets the service
can be extended for all important European, Japanese and
Korean vehicle manufacturers.
You simply need to mount the precision measurement bar,
which is able to carry the calibration targets, on the BBFAS
1000 base frame and you are ready to go. Precise orientation
of the frame and the target relative to the driving axle is made
possible with the Beissbarth 3D wheel alignment system or
with Beissbarth CCD system.

Changes reserved 32
ADAS CALIBRATION Q.DAS BEISSBARTH Version 2024-09-17

Q.DAS Standard | ADAS Calibration after wheel alignments

Modular solution for ADAS calibration of forward-facing and safety-critical radar, camera, and LIDAR systems. Standard version for workshops with low to medium calibration volumes.
Article number: 8 900 380 010

Q.DAS: OEM-compliant ADAS calibration in combination Free choice of calibration targets and radar mirrors
with wheel alignment Configuration according to calibration volume, budget and
space conditions
Q.DAS is a modular solution for the calibration of forward-facing, No fixed commitment to only one diagnostic tester
safety-relevant radar, camera and LIDAR systems.Configure your Integrated X-Y slider minimizes leveling
system depending on the volume, budget and available space. Motorized height adjustment

Q.DAS Standard: Just a few steps to the right system for ADAS calibration

Safety-relevant driver assistance systems: Radar and camera Scope of deliveries:

Vehicle class: Cars
Calibration volume in the workshop: low to medium 1x Modular Q.DAS frame, without targets or radar mirrors
Height adjustment: Motorized up to 1700 mm 1x Q.mApp software (Android) and license for activation (1
Works with all camera calibration targets: Yes year)
Supports eTargets: Yes 1x Digital Bluetooth laser distance gauge
Distance adjustment without re-leveling: 200 mm
Center offset adjustment without re-leveling: 200 mm *Costs apply: Requires active Q.mApp license in combination
with Q.Lign wheel aligner
Advantages of the Q.DAS system:

1. Digital instead of analog:

Camera-based positioning via live display

No plump bobs or measuring tapes
Full control over entire calibration
Direct specs instead of manual value transfer*

2. Wheel alignment and ADAS calibration as one process

No retooling
No moving of measuring devices
Permanently ready for use
Guided instructions for setup and positioning
Automatic compensation of different installation heights
Meets highest accuracy requirements of OEMs

3. Modular calibration solution for every workshop

Changes reserved 33
ADAS CALIBRATION Q.DAS BEISSBARTH Version 2024-09-17

Q.DAS Standard | ADAS Calibration after wheel alignments | 110V Version

Modular solution for ADAS calibration of forward-facing and safety-critical radar, camera, and LIDAR systems. Standard version for workshops with low to medium calibration volumes.
Article number: 8 900 380 020

Q.DAS: OEM-compliant ADAS calibration in combination Free choice of calibration targets and radar mirrors
with wheel alignment Configuration according to calibration volume, budget and
space conditions
Q.DAS is a modular solution for the calibration of forward-facing, No fixed commitment to only one diagnostic tester
safety-relevant radar, camera and LIDAR systems.Configure your Integrated X-Y slider minimizes leveling
system depending on the volume, budget and available space. Motorized height adjustment

Q.DAS Standard: Just a few steps to the right system for ADAS calibration

Safety-relevant driver assistance systems: Radar and camera Scope of deliveries:

Vehicle class: Cars
Calibration volume in the workshop: low to medium 1x Modular Q.DAS frame, without targets or radar mirrors
Height adjustment: Motorized up to 1700 mm 1x Q.mApp software (Android) and license for activation (1
Works with all camera calibration targets: Yes year)
Supports eTargets: Yes 1x Digital Bluetooth laser distance gauge
Distance adjustment without re-leveling: 200 mm
Center offset adjustment without re-leveling: 200 mm *Costs apply: Requires active Q.mApp license in combination
with Q.Lign wheel aligner
Advantages of the Q.DAS system:
US/JP Version with 110V
1. Digital instead of analog:

Camera-based positioning via live display

No plump bobs or measuring tapes
Full control over entire calibration
Direct specs instead of manual value transfer*

2. Wheel alignment and ADAS calibration as one process

No retooling
No moving of measuring devices
Permanently ready for use
Guided instructions for setup and positioning
Automatic compensation of different installation heights
Meets highest accuracy requirements of OEMs

3. Modular calibration solution for every workshop

Changes reserved 34
ADAS CALIBRATION Q.DAS BEISSBARTH Version 2024-09-17

Q.DAS Pro | ADAS Calibration after wheel alignments

Modular solution for ADAS calibration of forward-facing and safety-critical radar, camera, and LIDAR systems. Pro version for workshops with high calibration volumes.
Article number: 8 900 380 012

Q.DAS: OEM-compliant ADAS calibration in combination Free choice of calibration targets and radar mirrors
with wheel alignment Configuration according to calibration volume, budget and
space conditions
Q.DAS is a modular solution for the calibration of forward-facing, No fixed commitment to only one diagnostic tester
safety-relevant radar, camera and LIDAR systems.Configure your Integrated X-Y slider minimizes leveling
system depending on the volume, budget and available space. Motorized height adjustment

Q.DAS Pro: Just a few steps to the right system for ADAS calibration

Safety-relevant driver assistance systems: Radar and camera Scope of deliveries:

Vehicle class: Cars and light commercial vehicles
Calibration volume in the workshop: high 1x Modular Q.DAS frame, without targets or radar mirrors
Height adjustment: Motorized up to 2050 mm 1x Q.mApp software (Android) and license for activation (1
Works with all camera calibration targets: Yes year)
Supports eTargets: Yes 1x Digital Bluetooth laser distance gauge
Distance adjustment without re-leveling: 900 mm
Center offset adjustment without re-leveling: 200 mm *Costs apply: Requires active Q.mApp license in combination
with Q.Lign wheel aligner
Advantages of the Q.DAS system:

1. Digital instead of analog:

Camera-based positioning via live display

No plump bobs or measuring tapes
Full control over entire calibration
Direct specs instead of manual value transfer*

2. Wheel alignment and ADAS calibration as one process

No retooling
No moving of measuring devices
Permanently ready for use
Guided instructions for setup and positioning
Automatic compensation of different installation heights
Meets highest accuracy requirements of OEMs

3. Modular calibration solution for every workshop

Changes reserved 35
ADAS CALIBRATION Q.DAS BEISSBARTH Version 2024-09-17

Q.DAS Pro | ADAS Calibration after wheel alignments | 110V

Modular solution for ADAS calibration of forward-facing and safety-critical radar, camera, and LIDAR systems. Pro version for workshops with high calibration volumes.
Article number: 8 900 380 022

Q.DAS: OEM-compliant ADAS calibration in combination with space conditions

wheel alignmentQ.DAS is a modular solution for the calibration of No fixed commitment to only one diagnostic tester
forward-facing, safety-relevant radar, camera and LIDAR Integrated X-Y slider minimizes leveling
systems.Configure your system depending on the volume, Motorized height adjustment
budget and available space.Q.DAS Pro:
Just a few steps to the right system for ADAS calibration
Safety-relevant driver assistance systems: Radar and camera
Vehicle class: Cars and light commercial vehicles Scope of deliveries:
Calibration volume in the workshop: high
Height adjustment: Motorized up to 2050 mm 1x Modular Q.DAS frame, without targets or radar mirrors
Works with all camera calibration targets: Yes 1x Q.mApp software (Android) and license for activation (1
Supports eTargets: Yes year)
Distance adjustment without re-leveling: 900 mm 1x Digital Bluetooth laser distance gauge
Center offset adjustment without re-leveling: 200 mm
*Costs apply: Requires active Q.mApp license in combination
Advantages of the Q.DAS system: with Q.Lign wheel aligner

1. Digital instead of analog: US/JP Version with 110V

Camera-based positioning via live display

No plump bobs or measuring tapes
Full control over entire calibration
Direct specs instead of manual value transfer*

2. Wheel alignment and ADAS calibration as one process

No retooling
No moving of measuring devices
Permanently ready for use
Guided instructions for setup and positioning
Automatic compensation of different installation heights
Meets highest accuracy requirements of OEMs

3. Modular calibration solution for every workshop

Free choice of calibration targets and radar mirrors

Configuration according to calibration volume, budget and

Changes reserved 36
ADAS CALIBRATION Q.mApp Software BEISSBARTH Version 2024-09-17

Q.mApp | License Key 365

License for Q.mApp software for quicker positioning with Q.Lign, automatic ADAS specs through vehicle selection, complete ADAS documentation for third parties.
Article number: 8 900 388 001

Q.mApp: Safe and Fast ADAS Calibration Q.mApp can be installed on any Android-based tablet or directly
on the one delivered with your Q.Lign system! To use the full
ADAS calibration can be time-consuming and complex, potential of Q.mApp, a registration & activation is required:
especially when procedures, equipment, and positions vary
greatly among different OEMs. At the same time, safe and Download the .apk file of Q.mApp: Download Link Q.mApp
successful ADAS calibration requires thorough attention to detail. Install on the Android tablet of your choice
But who can keep track of it all? Order a license key card through your local dealer (supplied
with all Q.DAS systems)
ADAS calibration positioning made simple Enter your license key on base-licensecenter.com
Unlock all features of Q.mApp with activation key received
Q.mApp guides the user through the setup and positioning from the License Center
sequence for every OEM, regardless of static of dynamic
calibration. Selecting a vehicle and model immediately provides Find detailed installation instructions here: Q.mApp Installation
you with: Guide

Necessary equipment for ADAS calibration Scope of delivery:

Step-by-step instructions to correctly position ADAS fixture
and targets Key Card with activation code for 365 days.
Height, distance, and center offsets for target placement

One ecosystem: Q.mApp fully integrates wheel alignment

and ADAS calibration

By integrating wheel alignment and ADAS calibration, Q.mApp

ensures systems are performing as set out by OEMs. In
combination with Q.Lign, ADAS calibration becomes simpler
than ever:

Automatic compensation of height offsets

Realtime positioning of ADAS fixture to OEM specs (Height,
distance, offset, yaw angle)
Compensation of runout and clamping errors
Ensuring straight-ahead mode during calibration
Rear axle readings and ADAS positions in one printout

Easy installation of Q.mApp

Changes reserved 37
ADAS CALIBRATION BEISSBARTH Version 2024-09-17

Q.DAS Distance measurement laser for BB FAS

415
Calibration target set Nissan type 1
Article number: 8 900 381 139
Article number: 8 900 381 005
Q.DAS Standard | ADAS Calibration after
wheel alignments Calibration target set Nissan type 2
Article number: 8 900 380 010 Article number: 8 900 381 140
P-Assist
Article number: 8 900 381 138
Calibration target set Honda type 1
Q.DAS Standard | ADAS Calibration after Article number: 8 900 381 143
wheel alignments | 110V Version
Article number: 8 900 380 020
Positioning target Calibration target Honda type 2
Article number: 8 900 381 292 Article number: 8 900 382 297
Q.DAS Pro | ADAS Calibration after wheel
alignments
Article number: 8 900 380 012 Calibration target Honda type 3
Article number: 8 900 382 349
Target Shop
Q.DAS Pro | ADAS Calibration after wheel
Calibration target Mazda type 1
alignments | 110V
2-in-1 XXL calibration board | for VW front Article number: 8 900 382 318
Article number: 8 900 380 022
camera and multi-brand radar | Q.DAS
Article number: 8 900 381 056
Calibration target set Mazda type 2
Article number: 8 900 381 234
Q.mApp Software
eTarget Kit | Digital 15-in-1 solution
Article number: 8 900 380 011 Calibration target set Mitsubishi type 1
Q.mApp | License Key 365
Article number: 8 900 388 001 Article number: 8 900 381 218

Multi-Target starter kit 1

Calibration target Toyota type 1
Without wheel aligner Article number: 8 900 381 001
For articles to be ordered, see configuration.
Article number: 8 900 382 287

BBFAS 415 Multi-Target starter kit 2

Calibration target Toyota type 2
Article number: 8 900 380 008 Article number: 8 900 381 002
Article number: 8 900 382 328
For articles to be ordered, see configuration.
ADAS CALIBRATION BEISSBARTH Version 2024-09-17

Calibration target Toyota type 3 ACC reflector mirror | for radar calibration
Article number: 8 900 382 355 Article number: 8 900 381 150

Calibration target Subaru type 2S

Article number: 8 900 382 608 BBFAS 1415
Article number: 8 900 380 007

Calibration target Subaru type 3S

Article number: 8 900 382 590

Calibration target Kia / Hyundai type 2

Article number: 8 900 382 320

Calibration target Kia / Hyundai type 3

Article number: 8 900 382 316

Calibration target Mercedes/Infinity type 1

Article number: 8 900 382 312

Calibration target Mercedes / Infinity type 2

Article number: 8 900 382 319

Calibration target Universal type 6S

Article number: 8 900 382 571

Calibration target set Universal type 2

Article number: 8 900 381 142

Target storage box empty

Article number: 1 690 381 217
 IMPORTANT NOTES
Beissbarth Automotive Testing Solutions GmbH
Hanauer Straße 101
80993 Munich, Germany
Please notice: This list contains spare parts, too. [email protected]
Without instruction or assembly. www.beissbarth.com
Delivery ex works including packaging.
Telefon: +49-(0)89-14901-0
Telefax: +49-(0)89-14901-246

VERSION 2024.09.17 – PRICES ON REQUEST

Starting from now all previous lists will lose their validity.
Please read our general terms and conditions in the latest version before ordering; to be found under www.beissbarth.com.

Order number 1 693 602 008 Print norm BB XXX / XX.XX.2020 DE · Subject to technical and program changes, errors excepted.

Powered by TCPDF (www.tcpdf.org)