Scribd
Upload
112 views3 pages

EC2 Flyer

This document provides information about a two-day course on designing concrete structures according to Eurocode 2. The course will be held on August 25-26, 2010 in Singapore and provides 14 professional development units. It costs $888 for members of IES or IStructE and $988 for non-members. The course will cover the key principles and changes in Eurocode 2 compared to the previous British standard. Participants will receive a course book and the course will include worked examples and reference experience implementing Eurocode 2 in the UK.

Uploaded by

kantkris
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views3 pages

EC2 Flyer

This document provides information about a two-day course on designing concrete structures according to Eurocode 2. The course will be held on August 25-26, 2010 in Singapore and provides 14 professional development units. It costs $888 for members of IES or IStructE and $988 for non-members. The course will cover the key principles and changes in Eurocode 2 compared to the previous British standard. Participants will receive a course book and the course will include worked examples and reference experience implementing Eurocode 2 in the UK.

Uploaded by

kantkris
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

REGISTRATION 2 EASY WAYS TO REGISTER!!

MAIL or FAX to:

Two-Day Course on

Design of Concrete Structures to Eurocode 2


Organiser Date Time Venue CPD Fees : IES / IStructE Joint Committee : 25 & 26 August 2010 (Wed & Thurs) : 8.30am to 5.30pm : Novotel Clark Quay Singapore, River Valley Rd. : 14 PDUs Pending Approval : $888 (IES and/or IStructE Members) $988 (Non-Members) Fees are inclusive of 7% GST, a $94 course book, lunches and light refreshments. In March 2010, all fifty-seven structural design British Standards published by BSI were withdrawn and replaced by the new suite of fifty-eight structural design Eurocodes and National Annexes. These Eurocodes, developed over many years, will now become the definitive design standards across Europe and in many countries worldwide where British and other European Standards have been previously adopted. As part of this process, EN 1992: Design of Concrete Structures (Eurocode 2) will replace BS 8110, and whilst there are many similarities in principle between the two codes, there are some significant differences in both principle and detail. About the Course This course is aimed at civil and structural engineers seeking an understanding of the general rules, main features and changes contained in Eurocode 2 and the accompanying UK National Annex. Reference will be made to the accompanying codes EC (Basis of Structural Design) and EC1 (Actions on Structures). The course will cover the Eurocode system, basis of design, structural loading, material properties, design at the ultimate limit state and the serviceability limit state. Verification for fire resistance using the method of tabulated data for member analysis will be explained. An introduction to the design of Prestressed Concrete to EC2 will be included. Worked examples with direct reference to the code clauses will be used to illustrate the application of the code requirements. Wherever possible reference will be made to relevant experience gained since implementation in the UK

Professional Activities Centre Faculty of Engineering National University of Singapore 3 Engineering Drive 2 Blk E1 #05-15, Singapore 117578 Enquires: Please contact Mr. Gabriel Ong for more information at Tel: (65) 6516 5113 Fax : (65) 6874 5097 or E-mail: [email protected] Website : http://www.eng.nus.edu.sg/PACentre

Fees

: $888 (IES / IStructE Members) / $988 (Non-Members)

* Fees are inclusive of 7% GST, course materials, lunch and light refreshment.

Payment :

Payment is required prior to the course.

Refunds and A 50% refund will be made for withdrawals (received in writing) Cancellations: ten working days before the commencement of the course. No refunds will be made thereafter. However, a replacement will be accepted upon prior arrangement at no extra cost. Please inform us of the changes, if any, by fax. The Professional Activities Centre reserves the right to cancel the course and fully refund the participants, should unforeseen circumstances warrant it. Every effort will be made to inform participants of any changes. Confirmation of Registration Confirmation of registration will be given 5 working days prior to the commencement date via email, and you are required to acknowledge it. If you do not receive the said confirmation email, you are required to contact us immediately at +65 6516 5113. We reserve the right to allow only confirmed registrants to attend the event. Closing Date: 18 August 2010

Course Outline Introduction to and overview of Eurocodes EC and EC1: Actions and combinations of actions Introduction to EC2 Simplified load arrangements Clause 5.1.3(1)P and UK NA Materials, durability, fire, (exposure class, cover, axis distance, crack widths) Development and application of flexural design equations for singly and doubly reinforced sections One-way spanning slabs Beams Flanged beams Development and application of design equations for shear and torsion Deflection Bond, anchorage lengths, lap lengths, curtailment etc. Two-way spanning slabs. Flat slabs. Punching shear. Combined axial and uniaxial bending for short/slender columns. Combined axial and biaxial bending for short/slender columns. Introduction to EC7: Geotechnical design. Spread footings. Prestressed Concrete Where to go from here sources of further information.

CV of Speakers Ray Hulse BSc, MSc, CEng, FICE Ray is a Chartered Civil Engineer and a Fellow of the Institution of Civil Engineers (ICE). He was, until recently, the Associate Dean in the Faculty of Engineering and Computing at Coventry University. He has over 35 years experience of teaching, research and consultancy including a period spent at NTI (now NTU) in Singapore. He currently works for the ICE as a Regional Membership Development Officer and is Director of his own educational consultancy company. His publications include nine co-authored textbooks including Reinforced Concrete Design to Eurocode 2 and he has, in the past two years, presented many public and in-company courses on Eurocode 2. Bill McKenzie BSc, PhD, CPhys, MInstP, CEng Bill is a Lecturer in Structural Engineering at Edinburgh Napier University on undergraduate and postgraduate courses, including the MSc course in Advanced Structural Engineering. He graduated from Heriot-Watt University, Edinburgh and has been involved in consultancy, research and teaching for almost 35 years. His publications include one structural analysis textbook and five design textbooks in addition to research papers relating to stress analysis using holographic interferometry. As a member of the Institute of Physics he is both a Chartered Engineer and a Chartered Physicist. He has presented several CPD courses and guest lectures to industry, in relation to the introduction and use of Eurocodes.

Course Book A copy of the text book entitled Reinforced Concrete Design to Eurocode 2 (Costs $94.00). Authors: Bill Mosley, John Bungey and Ray Hulse, will be provided to all participants. Target Audience Civil & Structural Engineers, Designers and Contractors.

REGISTRATION FORM
Design of Concrete Structures to Eurocode 2 Wed, 25 & Thu, 26 August 2010 08.30am to 05.30pm, Novotel Clark Quay Singapore Fees : $888 (IES / IStructE Members) / $988 (Non-Members)
* Fees are inclusive of 7% GST, course book, lunch and light refreshment.

Name: NRIC: Company: Address: Designation:

Tel: Email: Contact Person: Please indicate: IES members IStructE members Non-members

Fax:

IES membership No.: _________________________ IStructE membership No.: Sponsored by company

P.E. No.: ___________________ (if applicable) Payment Mode: Cheque No: Amount (S$): Crossed cheques should be made payable to National University of Singapore and mailed together with the registration form to: Professional Activities Centre, Faculty of Engineering, National University of Singapore, 3 Engineering Drive 2, Blk E1 #05-15, Singapore 117578 VISA/MSTR/AMEX: Authorised Signature/ Company Stamp: Expiry Date:

You might also like