Wire Continuity Testing and Commissioning Form
Uploaded by
JaniornielWire Continuity Testing and Commissioning Form
Uploaded by
JaniornielELECTRICAL CONTINUITY TESTING / CHECKLIST
Site Location Line 1 Red
Equipment No. Line 2 Yellow
Type/ Rating Line 3 Blue
Brand Neutral White or Gray
Serial No. Ground Green or Black
Calibration Expiry PEC 2017 2.0.1.6
CIRCUIT
DESCRIPTION L1-L2 L2-L3 L3-L1 L1-N L2-N L3-N L1-G L2-G L3-G N-G WIRE SIZE REMARKS
NUMBER
1
2
3
4
5
6
7
8
9
10
DATE OF FINAL TESTING
Contractor
3rd Party Inspector
Owner
Page 2-2
C. Turns Ratio Test
Winding Tap Expected As Found Percent Remarks
Terminals Ratio Ratio Diff(%) Limits ±
Test Intrument used:
Type:
Model/S.N.:
D. Excitation Test
Winding Tap Test Exciting Current
Terminals Voltage Reading Milli-Amps Remarks
Test Intrument used:
Type:
Model/S.N.:
Limits of Excitation Test:
E. Diaelectric Breakdown Voltage Test of Insulating Oil
Trials Average Remarks
Type 1 2 3 4 5 in KV Limits > 24KV
Test Intrument used:
Type:
Model/S.N.:
Remarks: 1. The limits for the winding resistance test are ± 5% difference with the other windings or compare
the manufacturers test values
2. The insulation resistance readings are corrected to 20 degrees Celsius with a multiplier of 1.98
3. The insulation resistance readings for the secondary windings reached the equipment maximum
range at a given test voltage.
4. Test results are within the limits
Note: Date of Final Testing
Please Sign Over Printed Name Building Design Consultants
CMD/Project Director or designate
Project Manager
APMC-TSG Representative
Contractor
