Scribd
Upload
83 views1 page

BF 810

Uploaded by

Yasamin Gharib
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
83 views1 page

BF 810

Uploaded by

Yasamin Gharib
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

®

3Ai=O
CONNEC T IVI TY SOLUT IONS
BAFO Premium Partner (India)
Yeshwanthpur, Bangalore-560 022 India
Tel:+91 97399 52969, +91 80 23374772/ 73/ 74
[email protected] www.icplindia.com

BF-810
USB - SERIAL ADAPTER (0B9)

The BF-810 USB -Serial Adapter operates as a bridge between


one USB port and one standard RS232 Serial port.

Features Product Specification


• Full compliance with the USB Specification V1 .1 use 1/F
• Support the RS232 Serial interface • Full-Speed USB Device
• Support automatic handshake mode • USB bulk-type data for maximum data transfer
• 230Kbps transfer rate • Supports USB power management and remote wake up scheme
• Supports remote wake-up and power management • Support USB Suspend/Resume detection logic
• Dual data buffers for upstream and downstream data flow • Support 4 endpoints: 1 control endpoint with maximum 8-byte
• Supports default ROM or external EEPROM for device packet,1 bulk IN endpoint with maximum 64-byte packet,1
configuration bulk out endpoint with maximum 64-byte packet and 1 interrupt
• One chip USB transceiver IN endpoint with maximum 8-byte packet.
• Maximum power consumption 200mW
RS232 Interface
• Support programmable baud rate generator.
Electrical Characteristics • Supports data format: data bits5, 6, 7,8 or 16.
• Parity type None,Odd, Even, Mark, Space Stop bits 1, 1.5, 2.
Serial Interface • Supports Baud Rate: 75, 150,300, 600, 1200, 1800, 2400, 3600,
4800, 7200,9600,14400,19200,28800,38400,57600,115200,
J. [ If [1 230400.
1 TXD 0 Data Output to Serial Port
2 DTR_N 0 Data Terminal Ready (active low) l:EPROM 1/F
3 RTS_N 0 Request to Send (active low) • Provides serial interface for read/write EEPROM
4 VDD_232 p RS-232 VDD • Check first two bytes of EEPROM and decide to use chip's default
5 RXD I Data input from Serial Bus parameter or EE PROM parameter
Ring indicator (active low) • Device Configuration Register is used to control some
6 RI-N I
vendor-specific functions
7 GND p Ground
8 VDD p Power Operating System
9 DSR-N I Data Set Ready (active low) • Windows- 98 SE/ME/2000/ XP/ Vista/ 7/ 8.1/10
10 DCD_N I Data Carrier Detect (active low) • Mac OS 8.6 or higher
11 CTS-N I Clear to Send (active low)
12 SHTD_N 0 Shut Down RS232 Transceiver
13 EE-CLK I /0 During reset, this pin is input for Operating Environment
simultaneous purpose. During normal,
this pin is Serial ROM Clock • Operating Temperature : 0 - 70 •c
14 EE-DATA I /0 Serial ROM data signal • Storage Temperature : -55 - 150 •c
22 TRI_MODE I RS-232 tri-state output control during • Humidity : 8% - 80 %
Suspend • Altitude : O -7000 Feet
use interface
15 DP I/0 USB DPLUS signal Compliance
16 DM I /0 USB DMINUS signal
I : input • O: output • 1/0: Bi-direction signal • P: Power/Ground FCC/CENCCI/BSMI

You might also like