Index

Model/Series - - - - - - - - - Page Model/Series - - - - - - - - - Page Model/Series - - - - - - - - -Page Model/Series - - - - - - - - - Page

Numerical
1L/1XL - - - - - - - - - - - - - - - - - - - - 24 800MQT - - - - - - - - - - - - - - - - - - - 60 DPG5 - - - - - - - - - - - - - - - - - - - - 131 N223F/N223FS- - - - - - - - - - - - - - - 14
2-M2 - - - - - - - - - - - - - - - - - - - - - 116 805-1 - - - - - - - - - - - - - - - - - - - - - 84 DPS-20 - - - - - - - - - - - - - - - - - - - - 29 N240X/N241X - - - - - - - - - - - - - 26, 27
3L- - - - - - - - - - - - - - - - - - - - - - - - 27 806-1 - - - - - - - - - - - - - - - - - - - - - 85 DPTG1/DPTG3 - - - - - - - - - - - - - - 131 N250 - - - - - - - - - - - - - - - - - - - - - 15
05- - - - - - - - - - - - - - - - - - - - - - - 114 807-1 - - - - - - - - - - - - - - - - - - - - - 84 DuoVent - - - - - - - - - - - - - - - - - - - 101 N360, N3601 - - - - - - - - - - - - - - - - 32
6 - - - - - - - - - - - - - - - - - - - - - - - - 80 909 - - - - - - - - - - - - - - - - - - - - 51-52 DWB - - - - - - - - - - - - - - - - - - - - - 115 N388 - - - - - - - - - - - - - - - - - - - - - 61
007- - - - - - - - - - - - - - - - - - - - - - - 41 909RPDA- - - - - - - - - - - - - - - - - - - 57 E-50 - - - - - - - - - - - - - - - - - - - - - - 30 NF8 - - - - - - - - - - - - - - - - - - - - - - 62
007DCDA - - - - - - - - - - - - - - - - - - 47 911- - - - - - - - - - - - - - - - - - - - - - - 96 E-75 - - - - - - - - - - - - - - - - - - - - - - 31 OTV - - - - - - - - - - - - - - - - - - - - - 109
7 - - - - - - - - - - - - - - - - - - - - - - - - 61 912HP- - - - - - - - - - - - - - - - - - - - - 59 E-100 - - - - - - - - - - - - - - - - - - - - - 30 P3- - - - - - - - - - - - - - - - - - - - - - - 102
008PCQT- - - - - - - - - - - - - - - - - - - 60 919- - - - - - - - - - - - - - - - - - - - - - - 54 E-120 - - - - - - - - - - - - - - - - - - - - - 31 P60- - - - - - - - - - - - - - - - - - - - - - - 18
8 - - - - - - - - - - - - - - - - - - - - - - - - 62 957/957N/957Z - - - - - - - - - - - - - - 48 Elbows - - - - - - - - - - - - - - - - - - - - 58 P777-100 - - - - - - - - - - - - - - - - - - 88
009- - - - - - - - - - - - - - - - - - - - - - - 53 957RPDA/957NRPDA/957ZRPDA - - 55 EMVII-6400SS- - - - - - - - - - - - - - - - 69 PB56- - - - - - - - - - - - - - - - - - - - - 100
9BD/9D/9DS - - - - - - - - - - - - - - - - 59 994- - - - - - - - - - - - - - - - - - - - - - - 49 ENS-20 - - - - - - - - - - - - - - - - - - - - 29 PBV - - - - - - - - - - - - - - - - - - - - - - 76
10L- - - - - - - - - - - - - - - - - - - - - - - 24 994BLT/994HMB- - - - - - - - - - - - - - 50 ET - - - - - - - - - - - - - - - - - - - - - - - 97 PG - - - - - - - - - - - - - - - - - - - - - - - 92
15- - - - - - - - - - - - - - - - - - - - - - - 114 994RPDA- - - - - - - - - - - - - - - - - - - 56 ETA- - - - - - - - - - - - - - - - - - - - - - - 97 PIPF - - - - - - - - - - - - - - - - - - - - - 103
17 - - - - - - - - - - - - - - - - - - - - - - - 87 1000 - - - - - - - - - - - - - - - - - - - - - 121 ET-ASF - - - - - - - - - - - - - - - - - - - - 99 PLT - - - - - - - - - - - - - - - - - - - - - - - 34
25AUB-Z3 - - - - - - - - - - - - - - - - - - - 5 1156F - - - - - - - - - - - - - - - - - - - - - 96 ET-RA - - - - - - - - - - - - - - - - - - - - - 97 PVS-1000 - - - - - - - - - - - - - - - - - - 36
26A- - - - - - - - - - - - - - - - - - - - - - - 17 1170-M2/L1170-M2 - - - - - - - - - - 112 ETX, ETSX - - - - - - - - - - - - - - - - - - 98 PX, P1-P16 - - - - - - - - - - - - - - - - 121
27 - - - - - - - - - - - - - - - - - - - - - - - 87 1250 - - - - - - - - - - - - - - - - - - - - - 121 F127W - - - - - - - - - - - - - - - - - - - - 14 QF - - - - - - - - - - - - - - - - - - - - - - 104
30/30L - - - - - - - - - - - - - - - - - - - - 27 1450F - - - - - - - - - - - - - - - - - - - - - 96 F-501 - - - - - - - - - - - - - - - - - - - - - 81 R-24, R-26, R-30 - - - - - - - - - - - - - 29
40L/40XL - - - - - - - - - - - - - - - - 25, 26 1500 - - - - - - - - - - - - - - - - - - - - - 121 F-502 - - - - - - - - - - - - - - - - - - - - - 81 RA - - - - - - - - - - - - - - - - - - - - - - 106
53L- - - - - - - - - - - - - - - - - - - - - - - 27 2000 - - - - - - - - - - - - - - - - - - - - - 121 F-503 - - - - - - - - - - - - - - - - - - - - - 81 RK-SAE-TC/RK-TC 1⁄8 - - - - - - - - - - 58
70A- - - - - - - - - - - - - - - - - - - - - - 113 2000-M5 - - - - - - - - - - - - - - - - - - 104 F-511 - - - - - - - - - - - - - - - - - - - - - 82 RK-W STD - - - - - - - - - - - - - - - - - - 65
77F-BI - - - - - - - - - - - - - - - - - - - - - 87 2300 - - - - - - - - - - - - - - - - - - - - - - 15 F1131 - - - - - - - - - - - - - - - - - - - - 117 RL600 - - - - - - - - - - - - - - - - - - - - 122
77F-CSI - - - - - - - - - - - - - - - - - - - - 88 3000 - 3200 - - - - - - - - - - - - 123, 124 FBV/FBVS - - - - - - - - - - - - - - - - - - 74 RPV- - - - - - - - - - - - - - - - - - - - - - 100
77F-CSSI - - - - - - - - - - - - - - - - - - - 89 5300A - - - - - - - - - - - - - - - - - - - - - 28 FBV-3C/FBVS-3C - - - - - - - - - - - - - 74 S8/S8C - - - - - - - - - - - - - - - - - - - - 62
77F-DI-125/77F-DI-250 - - - - - - - - - 86 Alphabetical FBV-3-PP - - - - - - - - - - - - - - - - - - - 75 SAE-TC/SAE-TC Adapter - - - - - - - - 58
77F-DI-FDA-125 - - - - - - - - - - - - - - 86 A2C-M1- - - - - - - - - - - - - - - - - - - 115 FBV-3-SS/FBVS-3-SS - - - - - - - - - - 74 SAE-TC Brass Cap - - - - - - - - - - - - 58
77F-SS/77G-SS - - - - - - - - - - - - - - 89 A200 - - - - - - - - - - - - - - - - - - - - - 117 FBV-4/FBVS-4 - - - - - - - - - - - - - - - 75 SAN50- - - - - - - - - - - - - - - - - - - - 108
77S - - - - - - - - - - - - - - - - - - - - - - 86 ACV - - - - - - - - - - - - - - - - - - - - - - 16 FH/FHB - - - - - - - - - - - - - - - - - - - 118 SAN89- - - - - - - - - - - - - - - - - - - - 108
87SI - - - - - - - - - - - - - - - - - - - - - - 88 Air Gaps - - - - - - - - - - - - - - - - - - - 58 Fig. 10- - - - - - - - - - - - - - - - - - - - - 22 SC, SC8 - - - - - - - - - - - - - - - - - - 119
88CSI - - - - - - - - - - - - - - - - - - - - - 88 APU - - - - - - - - - - - - - - - - - - - - - 116 Fig. 31/41/41A - - - - - - - - - - - - 22, 23 SD-2 - - - - - - - - - - - - - - - - - - - - - - 63
88S - - - - - - - - - - - - - - - - - - - - - - 89 AS-20, 22, 26, 30 - - - - - - - - - - - - - 29 FR 500 - - - - - - - - - - - - - - - - - - - - 65 SD-3 - - - - - - - - - - - - - - - - - - - - - - 63
97FB-CI - - - - - - - - - - - - - - - - - - - - 90 AS/AS-T- - - - - - - - - - - - - - - - - - - 101 FS10-C - - - - - - - - - - - - - - - - - - - 107 S-FBV-1- - - - - - - - - - - - - - - - - - - - 76
97FB-CSSI - - - - - - - - - - - - - - - - - - 90 AS-B - - - - - - - - - - - - - - - - - - - - - 101 FS10-F - - - - - - - - - - - - - - - - - - - 107 SilverEagle TC- - - - - - - - - - - - - - - - 58
97FB-FSFE- - - - - - - - - - - - - - - - - - 90 B-24, B-26, B-30, B-36 - - - - - - - - - 29 FS-20 - - - - - - - - - - - - - - - - - - - - 107 SS - - - - - - - - - - - - - - - - - - - - - - 120
97FD-CI- - - - - - - - - - - - - - - - - - - - 90 B-3000/B-3001- - - - - - - - - - - - - - - 78 FS-26, FS-36 - - - - - - - - - - - - - - - - 30 SS07F- - - - - - - - - - - - - - - - - - - - - 65
100DT/100DT-A - - - - - - - - - - - - - - 32 B-3030 - - - - - - - - - - - - - - - - - - - - 78 FS-CDC-S - - - - - - - - - - - - - - - - - 125 ST375 - ST2000 - - - - - - - - - - - - - 121
100XL - - - - - - - - - - - - - - - - - - - - - 24 B-3100/B-3101- - - - - - - - - - - - - - - 78 FS-CFC-S - - - - - - - - - - - - - - - - - 125 STD-CA - - - - - - - - - - - - - - - - - - - 122
110/113/114/115/116/118/127(ACV) 16 B-3110/B-3111- - - - - - - - - - - - - - - 78 FS-CIC-S - - - - - - - - - - - - - - - - - - 125 SV/SVA/SVS - - - - - - - - - - - - - - - - 106
123LP - - - - - - - - - - - - - - - - - - - - - 15 B-4000/B-4001- - - - - - - - - - - - - - - 79 FS-CTC-S - - - - - - - - - - - - - - - - - 126 SW/SWS/SWT/SWC - - - - - - - - - - 120
127- - - - - - - - - - - - - - - - - - - - - - - 19 B-4030 - - - - - - - - - - - - - - - - - - - - 79 FS-CWM-S- - - - - - - - - - - - - - - - - 126 T145B - - - - - - - - - - - - - - - - - - - - - 96
127W - - - - - - - - - - - - - - - - - - - - - 14 B-5000/B-5001- - - - - - - - - - - - - - - 79 FV-4M1 - - - - - - - - - - - - - - - - - - - 102 T156B - - - - - - - - - - - - - - - - - - - - - 96
140 - - - - - - - - - - - - - - - - - - - - 25, 26 B-5030 - - - - - - - - - - - - - - - - - - - - 79 G/GH - - - - - - - - - - - - - - - - - - - - 104 TA- - - - - - - - - - - - - - - - - - - - - - - 134
142/144- - - - - - - - - - - - - - - - - - - 108 B6000/B6001- - - - - - - - - - - - - - - - 67 G-4000M/G-4000-M1 - - - - - - - - - - 77 TB- - - - - - - - - - - - - - - - - - - - - - - 133
150A - - - - - - - - - - - - - - - - - - - - - 114 B6000-CC/B6001-CC - - - - - - - - - - 72 GBF-H, GBF-G - - - - - - - - - - - - - - - 93 TBC - - - - - - - - - - - - - - - - - - - - - 134
152A/152SS - - - - - - - - - - - - - - - - 18 B6002 - - - - - - - - - - - - - - - - - - - - - 70 GBV - - - - - - - - - - - - - - - - - - - - - - 77 TBP- - - - - - - - - - - - - - - - - - - - - - 134
174A- - - - - - - - - - - - - - - - - - - - - - 20 B6004 - - - - - - - - - - - - - - - - - - - - - 71 GBV-1 - - - - - - - - - - - - - - - - - - - - - 77 TBR- - - - - - - - - - - - - - - - - - - - - - 133
188A- - - - - - - - - - - - - - - - - - - - - - 61 B6010/B6011/B6012- - - - - - - - - - - 71 Gov. 80-M1 - - - - - - - - - - - - - - - - - 62 Test Cocks - - - - - - - - - - - - - - - - - - 58
210-5 - - - - - - - - - - - - - - - - - - - - - 24 B6013/B6014/B6015- - - - - - - - - - - 71 G-TB, G-TBR - - - - - - - - - - - - - - - 135 TDV - - - - - - - - - - - - - - - - - - - - - - 92
215- - - - - - - - - - - - - - - - - - - - - - - 18 B6080/B6081- - - - - - - - - - - - - - - - 68 GV/GVS/GLV - - - - - - - - - - - - - - - - 83 TK-7 - - - - - - - - - - - - - - - - - - - - - - 64
223/223S - - - - - - - - - - - - - - - - - - 13 B6300/B6301- - - - - - - - - - - - - - - - 70 H32 - - - - - - - - - - - - - - - - - - - - - - 27 TK-9A - - - - - - - - - - - - - - - - - - - - - 64
252A- - - - - - - - - - - - - - - - - - - - - - 18 B6400 - - - - - - - - - - - - - - - - - - - - - 71 H560- - - - - - - - - - - - - - - - - - - - - - 17 TK-99D - - - - - - - - - - - - - - - - - - - - 64
263A- - - - - - - - - - - - - - - - - - - - - - 17 B6400SE - - - - - - - - - - - - - - - - - - - 72 HAV - - - - - - - - - - - - - - - - - - - - - 102 TK-99E - - - - - - - - - - - - - - - - - - - - 64
276H300 - - - - - - - - - - - - - - - - - - - 18 B6780/B6781- - - - - - - - - - - - - - - - 70 HBV - - - - - - - - - - - - - - - - - - - - - 109 TK-DL - - - - - - - - - - - - - - - - - - - - - 64
288A- - - - - - - - - - - - - - - - - - - - - - 61 B6800/B6801- - - - - - - - - - - - - - - - 72 HP - - - - - - - - - - - - - - - - - - - - - - - 99 TL - - - - - - - - - - - - - - - - - - - - - - - 135
289- - - - - - - - - - - - - - - - - - - - - - - 61 Ball Valve Options - - - - - - - - - - - - - 73 * HPX - - - - - - - - - - - - - - - - - - - - - - 99 TP- - - - - - - - - - - - - - - - - - - - - - - 135
315- - - - - - - - - - - - - - - - - - - - - - - 21 BD - - - - - - - - - - - - - - - - - - - - - - 117 HWA - - - - - - - - - - - - - - - - - - - - - 109 TR - - - - - - - - - - - - - - - - - - - - - - - 65
340/342 - - - - - - - - - - - - - - - - - 25, 26 BD-QT - - - - - - - - - - - - - - - - - - - - 118 HY-42 - - - - - - - - - - - - - - - - - - - - 118 TSE-75 - - - - - - - - - - - - - - - - - - - - 30
374A- - - - - - - - - - - - - - - - - - - - - - 20 BF - - - - - - - - - - - - - - - - - - - - - 94, 95 ICV-125-2-2-T- - - - - - - - - - - - - - - - 80 TWS - - - - - - - - - - - - - - - - - - - - - - 63
375 - - - - - - - - - - - - - - - - - - - - - - 121 BIC-1000 - - - - - - - - - - - - - - - - - - - 36 ICVF-125 - - - - - - - - - - - - - - - - - - - 81 U5B-Z3 - - - - - - - - - - - - - - - - - - - - - 4
403RT-RW - - - - - - - - - - - - - - - - - - 82 BP30- - - - - - - - - - - - - - - - - - - - - - 28 ICVW-125 - - - - - - - - - - - - - - - - - - 80 UL - - - - - - - - - - - - - - - - - - - - - - 109
405/406 - - - - - - - - - - - - - - - - - - - 82 * BRV - - - - - - - - - - - - - - - - - - - - - - 33 IPF - - - - - - - - - - - - - - - - - - - - - - 103 * USG-B- - - - - - - - - - - - - - - - - - - - 110
408-OSY-RW - - - - - - - - - - - - - - - - 82 C1⁄4TF- - - - - - - - - - - - - - - - - - - - 122 IR-56- - - - - - - - - - - - - - - - - - - - - - 17 * USG-P- - - - - - - - - - - - - - - - - - - - 110
411- - - - - - - - - - - - - - - - - - - - - - - 83 C-36 - - - - - - - - - - - - - - - - - - - - - - 29 IT6300/IS6301 - - - - - - - - - - - - - - - 73 WAMV - - - - - - - - - - - - - - - - - - - - 120
415- - - - - - - - - - - - - - - - - - - - - - - 21 C-FBV-1 - - - - - - - - - - - - - - - - - - - 76 IWTG- - - - - - - - - - - - - - - - - - - - - - 18 WAS - - - - - - - - - - - - - - - - - - - - - 120
500 - - - - - - - - - - - - - - - - - - - - - - 121 CDC-S - - - - - - - - - - - - - - - - - - - 127 IWTG-Gas - - - - - - - - - - - - - - - - - 132 Watts Rock- - - - - - - - - - - - - - - - - - 66
530C - - - - - - - - - - - - - - - - - - - - - 27 CFC-P - - - - - - - - - - - - - - - - - - - - 127 IWTG-HTX - - - - - - - - - - - - - - - - - 132 WB-Watts Box - - - - - - - - - - - - - - - 66
560- - - - - - - - - - - - - - - - - - - - - - - 17 CFC-S - - - - - - - - - - - - - - - - - - - - 127 IWTG-NYC - - - - - - - - - - - - - - - - - 132 WBV-3/WBVS-3 - - - - - - - - - - - - - - 76
600/601S - - - - - - - - - - - - - - - - - - 80 CIC-P - - - - - - - - - - - - - - - - - - - - 128 Jumper Kits - - - - - - - - - - - - - - - - - 12 WBVC - - - - - - - - - - - - - - - - - - - - - 76
709- - - - - - - - - - - - - - - - - - - - - - - 40 CSM-61 - - - - - - - - - - - - - - - - - - - 91 KA2- - - - - - - - - - - - - - - - - - - - - - 115 WCV - - - - - - - - - - - - - - - - - - - - - - 85
709DCDA - - - - - - - - - - - - - - - - - - 46 CSM-81 - - - - - - - - - - - - - - - - - - - 91 L111 - - - - - - - - - - - - - - - - - - - - - 111 W-FLG- - - - - - - - - - - - - - - - - - - - - 66
719- - - - - - - - - - - - - - - - - - - - - - - 42 CSM-91 - - - - - - - - - - - - - - - - - - - 91 M1⁄4TF - - - - - - - - - - - - - - - - - - - 122 WFT - - - - - - - - - - - - - - - - - - - - - 105
740- - - - - - - - - - - - - - - - - - - - - - - 21 CTC-P - - - - - - - - - - - - - - - - - - - - 128 MG/MGH - - - - - - - - - - - - - - - - - - 104 WFTC/WFTK- - - - - - - - - - - - - - - - 106
745- - - - - - - - - - - - - - - - - - - - - - - 87 CTC-S - - - - - - - - - - - - - - - - - - - - 128 MHB-RC - - - - - - - - - - - - - - - - - - 119 WGV - - - - - - - - - - - - - - - - - - - - - - 83
750 - - - - - - - - - - - - - - - - - - - - - - 121 Cu7 - - - - - - - - - - - - - - - - - - - - - - 61 MMV-M1 - - - - - - - - - - - - - - - - - - 111 WGV-1 - - - - - - - - - - - - - - - - - - - - 84
757/757N - - - - - - - - - - - - - - - - - - 37 CV/CVS/CVY/CVYS - - - - - - - - - - - - 85 N9/N9C/N9-CD/NLF9 - - - - - - - - - - 59 WIB- - - - - - - - - - - - - - - - - - - - - - 105
757a/757Na - - - - - - - - - - - - - - - - - 38 CWH-S - - - - - - - - - - - - - - - - 35, 129 N30/N30L - - - - - - - - - - - - - - - - - - 27 WM-26/WM-30- - - - - - - - - - - - - - - 30
757aDCDA/757NaDCDA - - - - - - - - 44 CWM-S - - - - - - - - - - - - - - - - - - - 129 N36 - - - - - - - - - - - - - - - - - - - - - - 31 WPE-24- - - - - - - - - - - - - - - - - - - - 30
757DCDA/757NDCDA - - - - - - - - - - 43 CX, C4-C12 - - - - - - - - - - - - - - - - 121 N45B, N45B-M1 - - - - - - - - - - - - 6 – 7 W-SPL- - - - - - - - - - - - - - - - - - - - - 66
774- - - - - - - - - - - - - - - - - - - - - - - 39 DBF - - - - - - - - - - - - - - - - - - - - - - 94 N45B-EZ-M1, N45BDU-EZ - - - - - 8 – 9 WTD-600 - - - - - - - - - - - - - - - - - - 106
774DCDA - - - - - - - - - - - - - - - - - - 45 DETA- - - - - - - - - - - - - - - - - - - - - - 34 N50 - - - - - - - - - - - - - - - - - - - - - 107 WVS - - - - - - - - - - - - - - - - - - - - - - 65
777- - - - - - - - - - - - - - - - - - - - - - - 86 DET-M1 - - - - - - - - - - - - - - - - - - - - 33 N55B, N55B-M1 - - - - - - - - - - 10 – 11
777C-M1 - - - - - - - - - - - - - - - - - - - 89 DPG1 - - - - - - - - - - - - - - - - - - - - 130 N170- - - - - - - - - - - - - - - - - - - - - 113
800M4FR/800M4QT - - - - - - - - - - - 60 DPG3 - - - - - - - - - - - - - - - - - - - - 130 N223B/N223BS - - - - - - - - - - - - - - 14

* New items or sizes added.

 Watts Regulator Company
Since 1874 Watts Regulator Company has been a leader in valve technology, offering a
wide variety of products for applications in the commercial, fire protection, heating & hydronics,
irrigation, residential, steam and waterworks markets. As you will see by looking through our
general catalog, Watts has truly become the single source for plumbing & heating and water
quality products. Why not make Watts your single source for quality plumbing products?

Table of Contents
Section 1 Pressure Regulators & Automatic Control Valves. . . . . . . . . . . . . . . . . . . . 4 – 19

Section 2 Relief Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 – 28

Section 3 Water Heater Installation Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 – 35

(Drain Lines, Expansion Tanks, Water Heater Stands, Straps and Enclosures)

Section 4 Backflow Preventers & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 – 66

Section 5 Ball Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 – 77

Section 6 Gate / Globe / Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 – 85

Section 7 Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 – 90

Section 8 Balancing & Flow Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 – 92

Section 9 Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 – 95

Section 10 Hydronics / Steam Heating Products . . . . . . . . . . . . . . . . . . . . . . . . . . 96 – 109

Section 11 Tempering Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 – 113

Section 12 Plumbing Specialties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 – 122

(Wall Hydrants, Water Hammer Arrestors, Float Valves, Evaporative Cooler Kits, Trap Primers)

Section 13 Dielectric Unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 – 124

Section 14 Flexible Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 – 129

Section 15 Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 – 135

 Series U5B-Z3 (1⁄2" - 2")
1

High Performance Water Pressure Reducing Valves

Pressure Regulators & Automatic Control Valves

• Provides water pressure control solutions for residential, commercial, and

industrial applications
• Basic design and construction is time tested and proven
• Offers durability and years of continuous trouble-free operation
• Water savings up to 30%Δ (see page 12)

Specifications U5B-Z3
• Temperature Range: 33°F – 160°F (0.5°C – 71°C)
• Maximum Working Pressure: 300psi (20.7 bar)
Features
• Adjustable Reduced Pressure Range: 25 – 75psi (172 – 517kPa)
• Integral stainless steel strainer
• Standard Reduced Pressure Setting: 50psi (345kPa)
• Replaceable seat module
• Bronze body construction
Standards • Serviceable in line
Meets requirements of ASSE Standard 1003, (ANSI A112.26.2), CSA Standard B356,
Southern Standard Plumbing Code and listed by IAPMO. • Bypass feature controls thermal
expansion pressure (U5B)**
• High temperature resistant reinforced
diaphragm for hot water
Models
U5B-Z3 – NPT threaded female union inlet x NPT female outlet w/built in thermal
expansion bypass
U5B-S-Z3 – Solder union inlet x NPT female outlet w/built in thermal expansion bypass
5M3-Z6 – Water meter threaded connections and 71⁄2" (190mm) lay length for new or
existing meter box installations. For 5⁄8" (16mm), 5⁄8" x 3⁄4" (16 x 20mm) or 3⁄4" (20mm) meter
setters or resetters

Options
add Suffix:
G Gauge tapping
GG Gauge tapping and 160psi (11.0 bar) gauge
HP High pressure range 75 – 100psi (5.2 – 6.9 bar)
LP Low pressure range 10 – 35psi (69 – 241 kPa)
add Prefix:
LF Lead Free* construction
For additional information, request literature ES-U5

*The combined metal components of this product contacted by potable water contain
less than one half of one percent (0.5%) of lead by weight.
C
**Bypass will not work if inlet pressure is above 150psi (10.3 bar)
B

MODEL † SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A B C D
in. mm in. mm in. mm in. mm in. mm lbs. kgs.
U5B-Z3 1 ⁄2 15 55⁄8 143 57⁄8 149 41 ⁄ 4 108 15⁄8 41 4 1.8
U5B-Z3 3⁄4 20 63⁄16 157 6 7 ⁄8 175 5 127 17⁄8 48 5 2.3
U5B-Z3 1 25 65⁄8 168 7 3 ⁄8 187 53⁄8 137 2 50 6 2.7
U5B-Z3 1
1 ⁄4 32 715⁄16 191 8 3 ⁄8 213 61⁄8 155 21⁄4 57 9 4.0
U5B-Z3 11⁄2 40 97⁄16 240 9 3 ⁄8 238 61⁄2 165 27⁄8 73 14 6.3
U5B-Z3 2 50 107⁄8 276 121⁄4 311 9 229 31⁄4 83 23 10.4
† Dimensions for all models are shown on literature ES-U5.
4 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 25AUB-Z3 (1⁄2" – 2")

1
Standard Capacity Water Pressure Reducing Valves

Pressure Regulators & Automatic Control Valves

• Accurate water pressure control
• Bronze body construction
• Fast and easy adjustment
• Popular choice for residential and commercial applications
• Water Savings up to 30%Δ (see page 12)
25AUB-Z3
Specifications
• Temperature Range: 33°F - 160°F (0.5°C - 71°C) Features
• Maximum Working Pressure: 300psi (20.7 bar) • Union inlet connection
• Adjustable Reduced Pressure Range: 25-75psi (172 - 517kPa) • Integral stainless steel strainer
• Standard Reduced Pressure Setting: 50psi (345kPa) • Replaceable seat module
• Bronze body construction
Standards • Serviceable in line
Meets requirements of ASSE Standard 1003 (ANSI A112.26.2), CSA Standard B356, • Bypass feature controls thermal
Southern Standard Plumbing Code and Listed by IAPMO. expansion pressure**
• High temperature resistant reinforced
diaphragm for hot water
• Standard construction includes Z3
Models sealed spring cage and corrosion
25AUB-Z3 – NPT threaded female union inlet x NPT female outlet resistant adjusting & cage screws for
25AUB-S-Z3 – Solder union inlet x NPT female outlet outdoor/waterworks pit installations
25AUB-DU-Z3 – Double Union – NPT threaded union female inlet and outlet
25AUB-S-DU-Z3 – Double Union – Solder union inlet and outlet
25AUB-DU-THDxPEX-Z3 – Double Union – NPT threaded female union inlet and
PEX union outlet
25AUB-DU-CPVC-Z3 – Double Union – CPVC union inlet and outlet
25AUB-DU-LF-Z3 – Double union body less union fittings

Options
add Suffix:
G Gauge tapping 1⁄8"
GG Gauge tapping and 160psi (11.0 bar) gauge
HP High pressure range 75-125psi (5.2 – 8.6 bar)
LP Low pressure range 10-35psi (69 – 241 kPa)
Z7 400psi (27.6 bar) initial pressure, 1⁄2" (20mm) models only
add Prefix:
C
LF Lead Free* construction
B
For additional information, request literature ES-25AUB.

*The combined metal components of this product contacted by potable water contain
less than one half of one percent (0.5%) of lead by weight.
D
**Bypass will not work if inlet pressure is above 150psi (10.3 bar)
A
MODEL † SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A B C D
in. mm in. mm in. mm in. mm in. mm lbs. kgs.

25AUB-Z3 1⁄2 15 53⁄8 137 7 178 5 1 ⁄2 140 11⁄2 38 3.5 1.6

25AUB-Z3 3⁄4 20 55⁄16 135 7 178 5 1 ⁄2 140 11⁄2 38 3.5 1.6
25AUB-Z3 1 25 6 152 8 203 61⁄4 159 13⁄4 44 6.5 2.9
25AUB-Z3 11⁄4 32 83⁄4 222 9 229 6 7 ⁄8 175 21⁄8 54 10.0 4.5
25AUB-Z3 11⁄2 40 83⁄4 222 91⁄2 241 71⁄8 181 23⁄8 60 10.0 4.5
25AUB-Z3 2 50 3
9 ⁄4 235 111⁄4 286 8 203 31⁄4 83 15.0 6.8
† Dimensions for all models are shown on literature ES-25AUB.
For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 5
 Series N45B (1⁄2" – 1")
1

Water Pressure Reducing Valves

Pressure Regulators & Automatic Control Valves

• Bronze body construction

• Ideal for residential and commercial applications
• Integral stainless steel strainer and built-in bypass
• Water savings up to 30%Δ (see page 12)

Specifications N45BDU-M1
• Temperature Range: 33°F – 180°F (0.5°C - 82°C)
Features
• Maximum Working Pressure: 400psi (27.6 bar)
• Double union connections (inlet and
• Adjustable Reduced Pressure Range: 25 – 75psi (172 – 517 kPa)
outlet) option DU
• Standard Reduced Pressure Setting: 50psi (345 kPa).
• Integral, stainless steel strainer
Standards • Thermoplastic seat and cage
Meets requirements of ASSE Standard 1003 (ANSI A112.26.2) and CSA Standard B356. • Bronze body construction
Certified by NSF to ANSI/NSF Standard 61-8 (LF N45B-M1 Models only). Listed by • Serviceable in line
IAPMO, City of Los Angeles.
• Bypass feature controls thermal
expansion pressure**
• Sealed spring cage on all models for
waterworks pit installation
Models
N45B-M1 – NPT threaded female inlet x NPT female outlet
N45BU-M1 – NPT threaded union inlet x NPT female outlet
N45BU-S-M1 – Solder union inlet x NPT female outlet
N45BDU-M1 – Double Union – NPT threaded union female inlet and outlet
N45BDU-S-M1 – Double Union – Solder union inlet and outlet
N45BDU-PEX-M1 – Double Union – PEX union inlet and outlet
N45BDU-CPVC-M1 – Double Union – CPVC union inlet and outlet

Options
add Suffix:
G Gauge tapping
GG Gauge tapping and 160psi (11.0 bar) gauge
add Prefix:
LF Lead Free* construction
For additional information, request literature ES-N45B
*The combined metal components of this product contacted by potable water contain
less than one half of one percent (0.5%) of lead by weight
**Bypass will not work if inlet pressure is above 150psi (10.3 bar).
C
B

MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A B C D
in. mm in. mm in. mm in. mm in. mm lbs. kgs.

N45BDU-M1 12
⁄ 15 11 16
4 ⁄ 119 6⁄14 159 9 16
4⁄ 116 13 16
1 ⁄ 43 2.5 1.1
N45BDU-M1 3⁄4 20 411⁄16 119 61⁄4 159 49⁄16 116 113⁄16 43 2.5 1.1
N45BDU-M1 1 25 55⁄8 143 61⁄4 159 49⁄16 116 113⁄16 43 3 1.4
† Dimensions for all models are shown on literature ES-N45B.

6 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series N45B (11⁄4" – 2")

1
Water Pressure Reducing Valves

Pressure Regulators & Automatic Control Valves

• Bronze body construction
• Ideal for residential and commercial applications
• Sealed spring cage on all models for waterworks pit installations
• Water savings up to 30%Δ (see page 12)

Specifications N45BDU
• Temperature Range: 33˚F – 180˚F (0.5°C – 82˚C) Features
• Maximum Working Pressure: 300psi (20.7 bar) • Double union inlet & outlet connections
• Adjustable Reduced Pressure Range: 25 – 75psi (172 – 517kPa) • Integral stainless steel strainer
• Standard Reduced Pressure Setting: 50psi (345kPa) • Thermoplastic seat & cage
• Bronze body construction
Standards • Serviceable in line
Meets requirements of ASSE Standard 1003 (ANSI A112.26.2); CSA Standard B356; and • Bypass feature controls thermal
listed by IAPMO. City of Los Angeles.
expansion pressure**
• Sealed spring cage on all models for
waterworks pit installations

Models
N45B – NPT threaded female inlet x NPT female outlet
N45BU – NPT threaded union inlet x NPT female outlet
N45BU-S – Solder union inlet x NPT female outlet
N45BDU – Double Union – NPT threaded union female inlet
and outlet
N45BDU-S –Double Union – Solder union inlet and outlet

Options
add Suffix:
G Gauge tapping
GG Gauge tapping and 160psi (11.0 bar) gauge
For additional information, request literature ES-N45B-L.
**Bypass will not work if inlet pressure is above 150psi (10.3 bar)

C
B

MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A B C D
in. mm in. mm in. mm in. mm in. mm lbs. kgs.

N45BDU 11⁄4 32 83 ⁄8 213 105⁄16 262 87⁄8 225 17⁄16 36 6.5 2.9
N45BDU 11⁄2 40 83 ⁄8 213 101⁄2 267 87⁄8 225 1 5 ⁄8 41 8 3.6
N45BDU 2 50 9 228 129⁄16 319 87⁄8 225 1 7 ⁄8 47 9 4.1
N45BDU-S 11⁄4 32 715⁄16 201 105⁄16 262 87⁄8 225 17⁄16 36 6.5 2.9
N45BDU-S 11⁄2 40 83⁄16 207 101⁄2 267 87⁄8 225 1 5 ⁄8 41 8 3.6
N45BDU-S 2 50 91⁄4 235 129⁄16 319 87⁄8 225 1 7 ⁄8 47 9 4.1

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 7
 Series N45B-EZ (1⁄2" – 1")
1

Water Pressure Reducing Valves

Pressure Regulators & Automatic Control Valves

• Bronze body construction

• Ideal for residential and commercial applications
• Factory calibrated outlet pressure adjustment
• Easily adjustable pressure setting
• Water savings up to 30%Δ (see page 12)
N45BDU-EZ-M1
Specifications Features
• Temperature Range: 33˚F – 180˚F (0.5°C – 82˚C) • Factory calibrated outlet pressure
adjustment
• Maximum Working Pressure: 400psi (27.6 bar)
• Easily adjustable pressure setting
• Adjustable Reduced Pressure Range: 25-75psi (172 - 517kPa)
• Double union inlet & outlet
• Standard Reduced Pressure Setting: 50psi (345kPa)
connections (option DU)
Standards • Integral stainless steel strainer
Meets requirements of ASSE Standard 1003 (ANSI A112.26.2); CSA Standard B356; and • Thermoplastic cage & seat
listed by IAPMO. • Bronze body construction
• Serviceable in line
• Bypass feature controls thermal
expansion pressure**
Models
N45B-EZ-M1 – NPT threaded female inlet x NPT female outlet
N45BU-EZ-M1 – NPT threaded union inlet x NPT female outlet
N45BU-EZ-S-M1 – Solder union inlet x NPT female outlet
N45BDU-EZ-M1 – Double Union – NPT threaded union female inlet and outlet
N45BDU-EZ-S-M1 – Double Union – Solder union inlet and outlet

Options
add Suffix:
G Gauge tapping
GG Gauge tapping and 160psi (11.0 bar) gauge
For additional information, request literature ES-N45B-EZ.

add Prefix:
LF Lead Free* construction

*The combined metal components of this product contacted by potable water contain
less than one half of one percent (0.5%) of lead by weight

**Bypass will not work if inlet pressure is above 150psi (10.3 bar)

C
B

MODEL † SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A B C D
in. mm in. mm in. mm in. mm in. mm lbs. kgs.

N45BDU-EZ-M1 12⁄ 15 11 16
4 ⁄ 119 1 16
6⁄ 154 38
4⁄ 111 11 16
1 ⁄ 43 6.5 2.9
N45BDU-EZ-M1 3⁄4 20 411⁄16 119 61⁄16 154 43⁄8 111 111⁄16 43 8 3.6
N45BDU-EZ-M1 1 25 55⁄8 143 61⁄16 154 43⁄8 111 111⁄16 43 9 1.4
† Dimensions for all models are shown on literature ES-N45B-EZ.

8 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series N45BDU-EZ (11⁄4" – 2")

1
Water Pressure Reducing Valves

Pressure Regulators & Automatic Control Valves

• Bronze body construction
• Ideal for residential and commercial applications
• Factory calibrated outlet pressure adjustment
• Easily adjustable pressure setting
• Water savings up to 30%Δ (see page 12) N45BDU-EZ
Specifications Features
• Temperature Range: 33˚F – 180˚F (0.5˚C – 82˚C) • Factory calibrated outlet pressure
adjustment
• Maximum Working Pressure: 300psi (20.7 bar)
• Easily adjustable pressure setting
• Adjustable Reduced Pressure Range: 25 – 75psi (172 – 517kPa)
• Double union inlet & outlet
• Standard Reduced Pressure Setting: 50psi (345kPa)
connections
Standards • Integral stainless steel strainer
Meets requirements of ASSE Standard 1003 (ANSI A112.26.2); CSA Standard B356; • Bronze body construction
and listed by IAPMO. • Serviceable in line
• Bypass feature controls thermal
expansion pressure**

Models
N45BDU-EZ – Double Union - NPT threaded union female inlet and outlet
N45BDU-EZ-S – Double Union - Solder union inlet and outlet

Options
add Suffix:
G gauge tapping
GG gauge tapping and 160psi (11.0 bar) gauge
For additional information, request literature ES-N45BDU-EZ-L.
**Bypass will not work if inlet pressure is above 150psi (10.3 bar)

C
B

MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A B C D
in. mm in. mm in. mm in. mm in. mm lbs. kgs.

N45BDU-EZ 11⁄4 32 83⁄8 213 97⁄16 240 8 204 17⁄16 36 6.5 2.9
N45BDU-EZ 11⁄2 40 83⁄8 213 95⁄8 244 8 204 15⁄8 41 8 3.6
N45BDU-EZ 2 50 9 228 97⁄8 251 8 204 17⁄8 47 9 1.4
N45BDU-EZ-S 11⁄4 32 715⁄16 201 97⁄16 240 8 204 17⁄16 36 6.5 2.9
N45BDU-EZ-S 11⁄2 40 83⁄16 207 95⁄8 244 8 204 15⁄8 41 8 3.6
N45BDU-EZ-S 2 50 91⁄4 235 97⁄8 251 8 204 17⁄8 47 9 1.4

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 9
 Series N55B (1⁄2" – 1")
1

Water Pressure Reducing Valves

Pressure Regulators & Automatic Control Valves

• Bronze body construction

• Ideal for residential and commercial applications
• Integral stainless steel strainer and built-in bypass
• Water savings up to 30%Δ (see page 12)

Specifications N55BU-M1
• Temperature Range: 33˚F – 180˚F (0.5°C – 82˚C)
• Maximum Working Pressure: 400psi (27.6 bar) Features
• Adjustable Reduced Pressure Range: 25-75psi (172 - 517kPa) • Double union inlet & outlet
connections (option DU)
• Standard Reduced Pressure Setting: 50psi (345kPa)
• Integral stainless steel strainer
Standards • Thermoplastic seat
Meets requirements of ASSE Standard 1003 (ANSI A112.26.2) and CSA Standard B356. • Bronze body construction
Certified by NSF to ANSI/NSF Standard 61-8 (LF N55B-M1 Models only). Listed by • Serviceable in line
IAPMO. City of Los Angeles
• Bypass feature controls thermal
expansion pressure**
• Sealed spring cage on all models for
waterworks pit installations
Models
N55B-M1– NPT threaded female inlet x NPT female outlet
N55BU-M1 – NPT threaded union inlet x NPT female outlet
N55BU-S-M1 – Solder union inlet x NPT female outlet
N55BDU-M1 – Double Union – NPT threaded union female
inlet and outlet
N55BDU-S-M1 – Double Union – Solder union inlet and outlet
N55BDU-PEX-M1– Double Union – PEX union inlet and outlet
N55BDU-CPVC-M1 – Double Union – CPVC union inlet and outlet

Options
add Suffix:
G Gauge tapping
GG Gauge tapping and 160psi (11.0 bar) gauge
LP Low pressure range 10 – 35psi (69 – 241 kPa) C

add Prefix: B
C
LF Lead Free* construction
For additional information, request literature ES-N55B.

*The combined metal components of this product contacted by potable water contain D
less than one half of one percent (0.5%) of lead by weight
**Bypass will not work if inlet pressure is above 150psi (10.3 bar)

SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A B C D
in. mm in. mm in. mm in. mm in. mm lbs. kgs.
12
⁄ 15 1 16
4⁄ 103 14
6⁄ 159 9 16
4⁄ 116 11 16
1 ⁄ 43 1.5 .68
34
⁄ 20 41⁄16 103 61⁄4 159 49⁄16 116 111⁄16 43 1.5 .68
1 25 47⁄8 124 61⁄4 159 49⁄16 116 111⁄16 43 1.75 .79

10 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series N55B (11⁄4" – 2")

1
Water Pressure Reducing Valves

Pressure Regulators & Automatic Control Valves

• Bronze body construction
• Ideal for residential and commercial applications
• Sealed spring cage on all models for waterworks pit installations
• Water savings up to 30%Δ (see below)

Specifications N55BDU
For additional information, request literature
• Temperature Range: 33˚F – 180˚F (0.5°C – 82˚C) ES-N55B-L.
• Maximum Working Pressure: 300psi (20.7 bar) **Bypass will not work if inlet pressure is
• Adjustable Reduced Pressure Range: 25 – 75psi (172 – 517 kPa) above 150psi (10.3 bar)
• Standard Reduced Pressure Setting: 50psi (345 kPa)

Standards Features
Meets requirements of ASSE Standard 1003 (ANSI A112.26.2); CSA Standard B356;
• Bronze cage
and listed by IAPMO.
• Double union inlet & outlet
connections
• Integral stainless steel strainer
• Thermoplastic seat
Models
• Bronze body construction
N55B – NPT threaded female inlet x NPT female outlet
N55BU – NPT threaded union inlet x NPT female outlet • Serviceable in line
N55BU-S – Solder union inlet x NPT female outlet • Bypass feature controls thermal
N55BDU – Double Union – NPT threaded union female inlet
expansion pressure**
and outlet • Sealed spring cage on all models for
N55BDU-S –Double Union – Solder union inlet and outlet waterworks pit installations

Options
add Suffix:
G Gauge tapping
GG Gauge tapping and 160psi (11.0 bar) gauge

C
B

MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A B C D
in. mm in. mm in. mm in. mm in. mm lbs. kgs.

N55BDU 1⁄14 32 8⁄ 38 213 10 ⁄ 5 16

262 8⁄ 225 78 1⁄ 36 7 16
2.5 1.1
N55BDU 11⁄2 40 83 ⁄8 213 101⁄2 267 87⁄8 225 1 5 ⁄8 41 2.5 1.1
N55BDU 2 50 9 228 129⁄16 319 87⁄8 225 1 7 ⁄8 47 3 1.4
N55BDU-S 11⁄4 32 715⁄16 201 105⁄16 262 87⁄8 225 17⁄16 36 2.5 1.1
N55BDU-S 11⁄2 40 83⁄16 207 101⁄2 267 87⁄8 225 1 5 ⁄8 41 2.5 1.1
N55BDU-S 2 50 91⁄4 235 129⁄16 319 87⁄8 225 1 7 ⁄8 47 3 1.4
Δ Water Savings: A water savings test program concluded that reducing the water supply pressure from 80psi to 50psi

(551.2 – 344.8 kPa) resulted in a water savings of 30%. For additional information on conserving water and energy, request
our F-23QA brochure – “23 Questions and Answers About Water Pressure Reducing Valves”.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 11
 Jumper Kits
1

Temporary Bypass for Water Pressure Reducing Valves

Pressure Regulators & Automatic Control Valves

Jumper kits are used in new construction as a temporary bypass, prior to the actual
installation of a water pressure reducing valve on potable water supply systems.
The use of a temporary jumper permits testing of the building piping system for leaks Jumper Kit
and pressure loss and facilitates pipe flushing prior to the installation of the water
pressure reducing valve. On unsecured job sites, the jumper kit reduces loss from
theft or vandalism.
Jumper Kits come complete with union connections, washers, and a brass or plastic
pipe nipple with male union threads. The length of the jumper nipple matches the
valve lay length, allowing the piping to be completed prior to the installation of a
water pressure reducing valve and permitting quick change out from the jumper to
the valve.
The jumper kits include a stainless steel strainer screen to provide protection from
debris downstream of the valve.

How to order jumper kits

Example: 3⁄4" JK P-345 S 34

⁄ " JK P-345 S
Size:
12
⁄ ", 3⁄4", 1", 11⁄4", 11⁄2", 2"
Jumper Kit Designation:
Nipple Type: JUMPER KITS COMPLETE KITS WITH PLASTIC NIPPLE
B = Brass P = Plastic Model Size
Fits Valve Model: in. mm
25 = 25AUB-Z3 345 = N45, N55 (1⁄2", 1") 55 = N45, N55 (11⁄4" - 2") Female x Female Copper Sweat Tailpiece
JK-P-25 S 34
⁄" 20
Connection:
JK-P-345 S 34
⁄" 20
M = Male brass solder S = Female copper solder
JK-P-25 S 1" 25
JK-P-345 S 1" 25
A JK-P-25 S 11⁄4" 32
B JK-P-55 S 11⁄4" 32
C JK-P-25 S 11⁄2" 40
JK-P-55 S 11⁄2" 40
JK-P-25 S 2" 50
JK-P-55 S 2" 50
E D Female Copper Sweat x Male Brass Sweat Tailpiece
JK-P-345-FM S 3⁄4" 20
JK-P-345-FM S 1" 25
Jumper Kit Exploded View
Male x Male Brass Sweat Tailpiece
Kit consists of: JK-P-345-MM S 1" 25
A – Union Nut (2)
COMPLETE KITS WITH BRASS NIPPLE
B – Sweat Tailpiece (2)
Female x Female Copper Sweat Tailpiece
C – Fiber Washer (2) 34
JK-B-25 S ⁄" 20
D – Jumper Nipple JK-B-345 S 34
⁄" 20
E – Screen JK-B-25 S 1" 25
JK-B-345 S 1" 25
JK-B-25 S 11⁄4" 32
For additional information, request literature ES-JumperKits. JK-B-55 S 11⁄4" 32
JK-B-25 S 11⁄2" 40
JK-B-55 S 11⁄2" 40
JK-B-25 S 2" 50
JK-B-55 S 2" 50
Jumper Kits Include: Jumper Nipple, strainer screen, 2 fiber washers, 2 union nuts
and tailpieces as described above.
When removing Jumper Nipple and inserting the water pressure reducing valve, two
O-rings (ordered separately) are required. Refer to literature PL-RP-GP for O-ring
ordering information.

12 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 223, 223S (1⁄2" – 21⁄2")

1
High Capacity Water Pressure Reducing Valves

Pressure Regulators & Automatic Control Valves

• One of the most proven regulator designs available
• For commercial, institutional and industrial water pressure control applications
• Available with (223S) or without (223) a strainer
223S
Specifications
• Temperature Range: 33°F – 160°F (0.5°C – 71°C) Features
• Enlarged diaphragm, spring cage
• Maximum Working Pressure: 300psi (20.7 bar)
and seat orifice for super capacity
• Adjustable Reduced Pressure Range: 25-75psi (172 – 517kPa) performance
• Standard Reduced Pressure Setting: 50psi (345kPa) • Bronze body construction (except
• Size 1⁄2" – 2" (15 – 50mm) have bronze body construction 21⁄2" which is iron)
• Size 21⁄2" (65mm) has iron body construction • Serviceable in line
• Series 223S furnished with
Standards separate strainer
12⁄ " – 2" (15 – 50mm) Meets requirements of ASSE Standard 1003 (ANSI A112.26); CSA • Optional bypass feature controls
Standard B356; Southern Standard Plumbing Code, Military Standard MIL-V-18146B and thermal expansion pressure**
listed by IAPMO.
• Sealed spring cage on all models for
waterworks pit installations

Models
223 – NPT female inlet x NPT threaded female outlet
223-S – NPT female inlet x NPT threaded female outlet with strainer

Options
add Suffix:
B Built-in bypass feature
LP Low pressure range 10-35psi (69 – 241 kPa)
HP High pressure range 1⁄2", 3⁄4", 1" (15, 20, 25mm) 50 – 145psi (3.4 – 10.0 bar);
11⁄4" (32mm) 50 – 120psi (3.4 – 8.3 bar);
11⁄2" – 21⁄2" (40 – 65mm) 50 – 95psi (3.4 – 6.6 bar)
For additional information, request literature ES-223.
**Bypass will not work if inlet pressure is above 150psi (10.3 bar)

N D

A
As

SIZE (DN) BODY DIMENSIONS (APPROX.) WEIGHTS

A (223) As (223S) C D (223) N (223S) 223 223S
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.
12⁄ 15 Bronze 41⁄4 108 9 229 61⁄4 159 2 50 21⁄2 64 4.5 2.0 6.0 2.7
3⁄4 20 Bronze 41⁄4 108 9 229 61⁄4 159 2 50 21⁄2 64 5.0 2.3 6.5 2.9
1 25 Bronze 43⁄4 121 1015⁄16 262 61⁄2 165 21⁄8 54 215⁄16 75 7.0 3.2 9.5 4.3
11⁄4 32 Bronze 5 127 1115⁄16 287 63⁄4 172 23⁄4 70 3 76 9.0 4.1 12.0 5.4
11⁄2 40 Bronze 63⁄4 171 143⁄4 375 97⁄8 251 23⁄4 70 37⁄16 87 19.5 8.8 23.5 6.8
2 50 Bronze 8 203 163⁄4 425 103⁄4 273 33⁄8 86 4 102 30.0 13.6 37.5 17.0
21⁄2 65 Iron 9 229 201⁄8 511 103⁄4 273 33⁄8 86 5 127 32.5 14.8 59.0 26.8

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 13
 Series N223B, N223BS (21⁄2" – 3")
1

Super Capacity Water Pressure Reducing Valves

Pressure Regulators & Automatic Control Valves

• For commercial, institutional and industrial applications

• Sealed spring cage on all models for waterworks pit installations
• Triple coated with special corrosion preventative materials superior to hot dip galvanizing

N223B

Specifications Models Features

• Temperature Range: 33°F – 160°F N223B – NPT threaded female inlet x NPT • Enlarged diaphragm, spring cage
(0.5°C – 71°C) threaded female outlet and seat orifice for super capacity
• Maximum Working Pressure: 300psi N223B-S - NPT threaded female inlet x performance
(20.7 bar) NPT threaded female outlet with strainer
• Bronze body construction
• Adjustable Reduced Pressure Range: • Serviceable in line
25 – 75psi (172 – 517kPa) Options • Series N223S furnished with separate
• Standard Reduced Pressure Setting: add Suffix: strainer
50psi (345kPa) HP High pressure range 75 – 125psi • Standard bypass feature controls
(517 – 861 kPa) thermal expansion pressure**
**Bypass will not work if inlet pressure is For additional information, • Sealed spring cage on all models for
above 150psi (10.3 bar) request literature ES-N223B. waterworks pit installations

Series N223F, N223FS (3")

Super Capacity Water Pressure Reducing Valves
• Flanged connections
• For commercial or industrial applications
• Iron body construction
• Triple coated with special corrosion preventative materials superior to hot dip galvanizing
N223F
Specifications
• Size: 3" (80mm), flanged connections • Adjustable Reduced Pressure Range
Class 125psi (8.6 bar) WSP 25 – 75psi (172 – 517 kPa).
• Temperature Range: 33°F – 160°F • Standard Reduced Pressure Setting:
(0.5°C – 71°C) 50psi (345 kPa) For additional information,
• Maximum Working Pressure: 175psi • Model N223FS includes strainer request literature ES-N223F.
(12.1 bar)

Series 127W, F127W (3", 4")

High Capacity Water Pressure Reducing Valves
• Remote control water regulator Specifications
• Close pressure regulation • Maximum Working Pressure: 175psi
• Single seated (12.1 bar).
• Reduced Pressure Range: 25-100psi
Models (172 – 690 kPa) depending on the
• 127W - 3" (80mm) NPT threaded supply pressure
female inlet x female outlet • Temperature Range: 33°F – 160°F F127W
connections, bronze body (0.5°C – 71°C)
• F127W - 3", 4" (80, 100mm) flanged • The 4" (100mm) size is tapped for the For additional information, request literature
connections, iron body installation of a bypass line and an ES-127W or ES-F127W.
auxiliary regulator

14 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series N250 (1⁄2", 3⁄4")

1
Iron Body Water Pressure Reducing Valves

Pressure Regulators & Automatic Control Valves

• Integral strainer
• Unitized construction for ease of maintenance
• For standard capacity domestic water pressure regulation

Specifications N250
12 34
• Sizes: ⁄ ", ⁄ " (15, 20mm), NPT • Adjustable Reduced Pressure Range:
threaded female inlet and 25 – 75psi (172 – 517 kPa)
outlet connections • Temperature Range: 33°F – 160°F
• Maximum Working Pressure: 250psi (0.5°C – 71°C)
(17.2 bar) For additional information,
• Standard Reduced Pressure Setting: request literature ES-N250.
50psi (345 kPa)

Series 123LP (1⁄2", 3⁄4")

Water Pressure Reducing Valves
• NPT threaded female inlet and outlet connections

Specifications
• Maximum Working Pressure: 200psi • Nominal size 1⁄2" (15mm) or 3⁄4" (20mm)
(13.8 bar) • Adjustable Pressure Range: 40 – 50psi
• Reduced Pressure Setting: 25psi (276 – 345 kPa) 123LP
(172.4 kPa)
For additional information,
• Temperature Range: 33°F – 140°F request literature ES-123LP.
(0.5°C – 60°C)

Series 2300 (3" – 6")

Direct Operated Water Pressure Reducing Valves
• Designed for dead-end water service where the flow is intermittent and changes
rapidly, as on domestic water systems
• Ideal for fast acting equipment such as flushometers and snap cocks
• Pressure balanced design eliminates water hammer, pressure fluctuations, pressure
creep and costly maintenance

For additional information, request literature ES-2300.

2300

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 15
 Automatic Control Valves
1

“A” Series
Pressure Regulators & Automatic Control Valves

• Pilot Controlled Diaphragm Valve

• Globe or Angle Pattern
• Threaded or Flanged Ends
• Modulating, On-Off, or Combination functions available
ACV
Specifications Features
Globe Pattern: 11⁄4" – 24" (32mm – 600mm) • Exclusive "Quad-Seal" seat disc
Angle Pattern: 11⁄4" – 12" (32mm – 300mm) Retained on 31⁄2 sides. Provides
Body & Cover: Ductile Iron ASTM A536 64-45-12 drip-tight, positive closure
Coatings: NSF Approved Fusion Bonded Epoxy Coated and Lined • Long life non-edged seat
Valve Trim: 11⁄4" – 8": Stainless Steel 10" – 24": Bronze Allows for longer seat life and superior
Elastomers: Buna-N (std) low-flow performance
Tubing/Fittings: Copper and Brass • Top and bottom guided stem
Threaded: 400psi MWP (27.6 bar) Assures positive seat-to-disc
150 Flanged: 250psi MWP (17.2 bar) alignment and stable throttling
characteristics at low, intermediate,
300 Flanged: 400psi MWP (27.6 bar) and peak flow rates
• 100% NSF approved fusion bonded
Models epoxy lined and coated
Numerous functional combinations are available in each valve series. Consult your Watts Reduces rust and corrosion, greatly
Representative for detailed assistance in selecting and sizing the proper ACV for your extending the life of the main valve
specific application.
diaphragm. Shortens the time
110 Series – (Float / Level Control) required for maintenance and
113 Series – (Solenoid & Pump Control) improves valve flow coefficient
114 Series – (Rate-of-Flow Control) • FDA approved diaphragm
115 Series – (Pressure Reducing Control) Approved for use in drinking
116 Series – (Pressure Relief, Sustaining, or Backpressure Control) water systems
118 Series – (Check)
127 Series – (Altitude / Level Control)

Options
Materials
• Carbon Steel
• Stainless Steel
• Bronze
Elastomers
• Viton®
Tubing & Fittings
• Stainless Steel

For additional information, request literature C-CACV.

16 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 26A, 263A (1⁄8" – 1⁄2")

1
Small Pressure Regulators

Pressure Regulators & Automatic Control Valves

• Brass or stainless steel body regulators suitable for water and No. 2 fuel oil. Before
using them with other liquids, please consult the factory
• Readily meets requirements for use in beverage dispensing and paint spraying
equipment, drinking fountains and many other applications. We recommend the use of
strainers with all regulators
• Series 263A has extra 1⁄4" low pressure gauge port and is available with all stainless
steel construction, specify SS-263AP

Specifications SS263AP
• Sizes: 1⁄8", 1⁄4", 3⁄8", 1⁄2" (3-15mm) Reduced Pressure Ranges: Std.psi set at: Models
NPT threaded female inlet and Suffix A for 1 – 25psi 10 26A 2-Way Regulator-Brass
outlet connections Suffix B for 3 – 50psi 15 263A 3-Way Regulator-Brass
• Maximum Working Pressure: 300psi Suffix C for 10 – 125psi 25
(20.7 bar) Suffix D or 50 – 175psi 50 SS263A 3-Way Regulator-Stainless Steel
• Maximum Temperature: 140ºF (60°C).
• Available with Viton® trim
• Specify suffix letter for reduced pressure For additional information, request literature
range required ES-26A, 263.

Model SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A B C D
in. mm in. mm in. mm in. mm in. mm oz. gm.

26A 18
⁄ 3 21⁄4 54 37⁄8 98 3 76 78
⁄ 22 16 454 C
26A 1⁄4 8 21⁄4 54 37⁄8 98 3 76 7⁄8 22 16 454 B
26A 3⁄8 10 21⁄4 54 37⁄8 98 3 76 7⁄8 22 16 454
26A 1⁄2 15 21⁄4 54 4 100 31⁄8 79 7⁄8 22 16 454
263A 1⁄4 8 21⁄4 54 47⁄8 124 4 100 7⁄8 22 16 454
263A 3⁄8 10 21⁄4 54 47⁄8 124 4 100 7⁄8 22 16 454 D
263A 1⁄2 15 21⁄4 54 4 100 31⁄8 79 7⁄8 22 16 454 A

Series 560 (1⁄8" x 1⁄4", 3⁄4" x 3⁄4")

Mini Water Pressure Regulators
• General purpose brass body regula- (20.7 bar). Maximum temperature 140°F
tors for industrial, process, plumbing (60°C)
and OEM applications such as travel H560 – Water regulation for grid systems.
3⁄4" (20mm) female inlet and male outlet
trailers. Consult factory for special
hose connections. Max. pressure 150psi
H560
requirements.
(10.3 bar), adjustable from 10 – 60psi (68.9
Models – 413.7 kPa). Standard set at 40psi (276
kPa). Delivery capacity up to 250 gallons
560 – has female threaded 1⁄8" and 1⁄4" per hour (946 lph). Also used for recreation-
(3 and 8mm) inlet and outlet connections. al vehicles. Listed by IAPMO
Female 1⁄8" (3mm) side tapping (plugged)
For additional information, request
for gauge. Initial pressures up to 300psi
literature ES-560/H560 or IS-IR-56/H560G.

Series IR-56 (3⁄4")

Bronze Water Pressure Regulators
• Dependable, low cost regulator for • 1⁄8" (3mm) NPT female side tapping
grid systems and recreational vehicles for gauge
• Hose connection, male inlet x male • Maximum Working Pressure: 150psi
outlet (10.3 bar)
• Adjustable Reduced Pressure Range:
Specifications 10 – 60psi (68.9 – 413.7 kPa) IR-56
• Reduced Pressure Setting: 40psi
• 3⁄4" (20mm) hose connection female (275.8 kPa) For additional information,
inlet x male outlet • Delivery up to 250 gph (946 lph) request literature IS-IR-56/H560G.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 17
 Series P60 (1⁄4")
1

Mini Plastic Water Pressure Regulators

Pressure Regulators & Automatic Control Valves

• Compact, superior corrosion • Maximum Working Pressure: 300psi

resistant regulators (20.7 bar)
• For general purpose, OEM and • Maximum Temperature Range: P60
irrigation applications 33°F – 150°F (0.5°C – 66°C)
For additional information,
• Can be used with deionized water • Reduced Pressure Range: request literature ES-P60.
(A) 0 – 25psi (0 – 172 kPa);
Specifications (B) 0 – 60psi (0 – 413 kPa);
• 1⁄4" (8mm) NPT female connections (C) 0 – 125psi (0 – 861 kPa)

Series 215 (1⁄4", 3⁄8")

Precision Regulator for Low Pressures
215
• Forged brass body, for water and No. 2 Specifications
fuel oil • NPT threaded female inlet and • Reduced Pressure Ranges: Std.psi set at:
• For other liquids, consult factory outlet connections Suffix A for 0 – 8psi 4
Suffix B for 0 – 20psi 10
• Maximum Working Pressure: 300psi
Suffix C for 0 – 50psi 15
(20.7 bar)
• Temperature Range: 0°F – 120°F For additional information, request literature
(17.8°C – 49°C) ES-215.

Model 276H300, IWTG (3⁄4")

Water Pressure Test Gauges
• For testing water supply pressure within
Specifications
a distribution system 276H300 – 3⁄4" (20mm) hose thread
connection; 0 – 300psi (0 – 20.7 bar) 276H300
• Red indicator hand “holds” at highest
reading registered IWTG – 3⁄4" (20mm) hose thread
For additional information,
connection; 0 – 200psi (0 – 13.8 bar)
request literature F-Gauges.

Series 152A, 252A (1⁄2" – 2")

Process Steam Pressure Regulators
• For autoclaves, steam tables/irons,
vulcanizers and single radiators
• Also used on sterilizers, process lines,
testing fixtures and oil lines 152A
• Highly sensitive to reduced B C Models
pressure changes 152A – with iron body. Sizes: 1⁄2" to 2"
• Full volume with minimum pressure drop (15-50mm), NPT threaded female inlet and
D outlet connections. Initial pressures up to
• Sensitivity adjustment feature for
critical flow 200psi (13.8 bar)
A 152SS – with stainless steel body and trim,
sizes 1⁄2", 3⁄4",1" (15, 20, 25mm). For maxi-
MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT mum supply pressure up to 300psi (20.7
A B C D bar) at 420°F (216°C)
in. mm in. mm in. mm in. mm in. mm lbs. kgs. 252A – sizes 1⁄2", 3⁄4"(15, 20mm) identical to
152A 3 – 15 12
⁄ 15 6 150 58
8⁄ 219 6⁄ 78 175 34
1⁄ 44 12 5 152A except furnished in bronze body for
152A 3 – 15 34
⁄ 20 6 150 85⁄8 219 67⁄8 175 13⁄4 44 12 5 pressures up to 300psi (20.7 bar)
152A 3 – 15 1 25 71⁄2 191 91⁄4 235 71⁄4 184 2 50 20 9 152A-T, 152SS-T or 252A-T – tight seating
152A 3 – 15 11⁄4 32 71⁄2 191 91⁄4 235 71⁄4 184 2 50 20 9 models for dead end and liquid service.
When utilizing a Teflon® valve disc in the
152A 5 – 40 11⁄2 40 9 229 141⁄4 362 111⁄2 292 23⁄4 70 40 18
252A-T, the maximum operating tempera-
152A 5 – 40 2 50 9 229 141⁄4 362 111⁄2 292 23⁄4 70 40 18 tures are 300°F (149°C) at 300psi (20.7 bar)
252A 10 – 50 1⁄2 15 6 150 85⁄8 219 67⁄8 175 13⁄4 44 12 5 and 400°F (204°C) at 200psi (13.8 bar).
252A 10 – 50 3⁄4 20 6 150 85⁄8 219 67⁄8 175 13⁄4 44 12 5
1⁄2 See capacity chart on pg. 12 for max. ratings.
152SS 10 – 50 15 6 150 85⁄8 219 67⁄8 175 13⁄4 44 12 5
152SS 10 – 50 3⁄4 20 6 150 85⁄8 219 67⁄8 175 13⁄4 44 12 5 For additional information,
request literature ES-152A, ES-152SS.
152SS 10 – 50 1 25 71⁄2 191 91⁄4 235 71⁄4 184 2 50 20 9

18 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 127 (1⁄2" – 4")

1
Process Steam Pressure Regulators

Pressure Regulators & Automatic Control Valves

• Diaphragm type regulator
• Single seated
• Large capacity
C
• Main line process regulation B
• Heating and dead end service
• Institutional, commercial and industrial applications
D F127SS

A
Specifications
MODEL SIZE (DN) DIMENSIONS (APPROX.) • Sizes: 1⁄2" – 3" (15 – 80mm), bronze
body with NPT threaded inlet and
A B C D
in. mm in mm in mm in mm in mm
outlet connections
127 12
⁄ 15 4 102 16 406 15 381 1 25 • Sizes: 1⁄2" – 11⁄4" (15 – 32mm) have
127 3⁄4 20 4 102 16 406 15 381 1 25 composition disc
127 1 25 41⁄4 108 161⁄8 410 15 381 11⁄8 29 • Sizes: 11⁄2" – 3" (40 – 80mm) have
127 11⁄4 32 41⁄2 114 163⁄8 416 151⁄8 384 11⁄4 32 stainless steel disc.
127 11⁄2 40 51⁄4 133 163⁄4 425 151⁄4 387 11⁄2 38 • Adjustable Reduced Pressure Range:
127 2 50 6 152 171⁄8 435 153⁄8 391 13⁄4 44 5 –150psi (.34 – 10.3 bar) depending
127 21⁄2 65 71⁄4 184 177⁄8 454 153⁄4 400 21⁄8 54 on size of the valve and supply pres-
127 3 80 8 203 181⁄2 470 161⁄8 410 23⁄8 60 sure
F127* 3 80 8 203 201⁄2 521 163⁄4 425 33⁄4 95
F127* 4 100 121⁄8 308 211⁄4 540 163⁄4 425 41⁄2 114 For additional information,
request literature F-127.
*Iron body, flanged connections

Quick Reference Capacity Chart

MAXIMUM CAPACITIES In Pounds or Kilograms (lbs. or kgs.) per Hour of Steam
INITIAL FROM 50PSI FROM 100PSI FROM 150PSI FROM 200PSI FROM 250PSI
PRESSURE (3.4 BAR) (6.9 BAR) (10.3 BAR) (13.8 BAR) (17.2 BAR)
REDUCED UP TO 20PSI UP TO 50PSI UP TO 70PSI UP TO 90PSI UP TO 125PSI
PRESSURE (1.4 BAR) (3.4 BAR) (4.8 BAR) (6.2 BAR) (8.6 BAR)

MODEL SIZE (DN)

in. mm lbs./hr. kgs./hr. lbs./hr. kgs./hr. lbs./hr. kgs./hr. lbs./hr. kgs./hr. lbs./hr. kgs./hr.
127 12
⁄ 15 218 99 387 175 555 252 731 332 900 408
127 3⁄4 20 492 223 875 397 1255 569 1653 750 2037 924
127 1 25 878 398 1560 708 2237 1015 2943 1131 3631 1647
127 11⁄4 32 1370 621 2436 1105 3493 1584 4599 2086 5668 2570
127 11⁄2 40 1973 895 3508 1591 5030 2282 6623 3004 8163 3703
127 2 50 3518 1596 6253 2836 8967 4067 11807 5356 14553 6601
127 21⁄2 65 5494 2492 9766 4430 14006 6353 18442 8365 22730 10310
127 3 80 7906 3586 14054 6375 20154 9142 26538 12037 32709 14837
F127 3 80 7906 3586 14054 6375 20154 9142 – – – –
F127 4 100 8301 3765 14756 6693 21161 9598 – – – –
152A 12
⁄ 15 80 36 143 65 205 93 270 122 332 151
252A 12
⁄ 15 80 36 143 65 205 93 270 122 332 151
152A 3⁄4 20 285 129 506 230 726 329 956 434 1178 534
252A 3⁄4 20 285 129 506 230 726 329 956 434 1178 534
152A 1 25 402 182 715 324 1025 465 1349 612 1663 754
152A 11⁄4 32 442 200 786 357 1127 511 1484 673 1830 830
152A 11⁄2 40 665 302 1120 508 1600 726 2230 1012 2725 1236
152A 2 50 765 347 1285 583 1840 835 2564 1163 3134 1422
EXAMPLE: Initial Pressure is 100psi (6.9 bar), Reduced Pressure is 50psi (3.4 bar) and Capacity required is 1500 lbs. (680 kgs.) of
steam per hour. By referring to the proper initial reduced pressure column “From 100psi/Up to 50psi (6.9 – 3.4 bar)”, you will find the capaci-
ty of 1560 lbs./hr. (708 kgs./hr.) for the 1" (25mm) Model 127 valve corresponds most closely to the required capacity of 1500 lbs./hr.
NOTE: For reduced pressures greater than those shown for each Initial Pressure column above, refer to the Detailed Capacity Table in the
Watts brochure F-127. Be sure to determine both Initial Pressure and Reduced Pressure setting, or the range required.
For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 19
 Series 174A ( ⁄ " – 2") 34

Model 374A ( ⁄ ") 34

ASME Water Pressure Safety Relief Valves

2

• For hot water heating and supply boilers

• Pressure protection only
Relief Valves

• Series 174A bronze body construction resists corrosive water conditions

of water supplies
174A
Specifications
• Standard Pressure Relief Setting: 30psi (206.9 kPa).
• Other valve settings are available in 5psi (34.5 kPa) increments from 30 – 150psi
(2.1 – 10.3 bar)

Models
174A – Sizes 3⁄4" – 2" (20 – 50mm), NPT threaded female inlet x female outlet
(drain) connection
374A has iron body with bronze inlet; 550,000 BTU/hr. rating

For additional information, request literature ES-174A-740.

C
B

E
A

MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A B C D E
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
174A 34
⁄ 20 12
2⁄ 64 78
4⁄ 124 34
3⁄ 95 18
1⁄ 29 58
1⁄ 41 1.5 0.7
174A 1 25 3 76 57⁄8 149 43⁄8 111 11⁄2 38 17⁄8 48 3.1 1.4
174A 11⁄4 32 43⁄4 121 81⁄2 216 63⁄8 162 21⁄8 54 23⁄8 60 6.3 2.8
174A 11⁄2 40 47⁄8 124 91⁄4 235 63⁄4 171 21⁄2 64 25⁄8 67 7.3 3.3
174A 2 50 61⁄2 165 101⁄4 260 71⁄4 184 3 76 33⁄8 86 13.8 6.2
374A 3⁄4 20 21⁄2 64 35⁄8 72 23⁄8 60 11⁄4 32 11⁄2 38 1.1 0.5

Safety Relief Valves Settings and Relieving Capacities

(National Board Certified Ratings) BTU Steam Discharge Capacities (lbs./hr.)
MODEL SIZE (DN) 30PSI 100PSI 125PSI 150PSI
in. (mm)

174A 34
⁄ 20 650,000 1,695,000 2,070,000 2,445,000
174A 1 25 1,005,000 2,635,000 3,215,000 3,795,000
174A 11⁄4 32 1,682,000 4,399,000 5,370,000 6,340,000
174A 11⁄2 40 2,020,000 5,290,000 6,460,000 7,630,000
174A 2 50 3,815,000 9,970,000 12,170,000 14,370,000
374A 3⁄4 20 550,000 – – –
Note: Valve settings, other than shown above, are available in 5psi increments within the pressure ranges shown.

20 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 740 (3⁄4" – 2")
Iron Body ASME Rated Water Pressure Relief Valves
• For hot water heating boiler pressure protection
• Expanded outlet drain connections

2
• Size for size, Watts 740 Models offer greater discharge capacity than comparable
competitive models

Relief Valves
Specifications 740
• NPT threaded female inlet x female outlet (drain) connection
• Sizes 3⁄4" x 1" (20 x 25mm), 1" x 11⁄4" (25 x 32mm), 11⁄4" x 11⁄2" (32 x 40mm),
11⁄2" x 2" (40 x 50mm), 2" x 21⁄2" (50 x 65mm)
• Standard pressure relief setting is 30psi (206.9 kPa) C
B
• Other settings available in 5psi (34.5 kPa) increments from 30 – 75psi (206.9 – 5.2 bar)

For additional information, request literature ES-174A/740.

D
E
A
MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A B C D E
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
740 34
⁄ x1 20 – 25 3 76 57⁄8 149 43⁄8 111 11⁄2 38 17⁄8 48 1.9 .9
740 1 x 11⁄4 25 – 32 31⁄2 89 71⁄4 184 53⁄8 137 17⁄8 48 21⁄8 54 3.1 1.4
740 11⁄4 x 11⁄2 32 – 40 45⁄8 117 83⁄4 222 61⁄2 165 21⁄4 57 25⁄8 67 6.1 2.8
740 11⁄2 x 2 40 – 50 51⁄4 133 91⁄4 235 7 178 21⁄4 57 3 76 7.5 3.4
740 2 x 21⁄2 50 – 65 63⁄4 171 115⁄8 295 83⁄4 222 27⁄8 73 37⁄8 98 16.5 7.5

Safety Relief Valves Settings and Relieving Capacities

(National Board Certified Ratings) BTU Steam Discharge Capacities (lbs./hr.)
MODEL SIZE (DN) 30PSI 45PSI 50PSI 75PSI
in. mm

740 34⁄ x1 20 x 25 925,000 1,245,000 1,352,000 1,886,000

740 1 x 13⁄4 25 x 32 1,300,000 1,750,000 1,899,000 2,649,000
740 11⁄4 x 11⁄2 32 x 40 2,105,000 2,830,000 3,075,000 4,285,000
740 11⁄2 x 2 40 x 50 2,900,000 3,903,000 4,237,000 5,909,000
740 2 x 21⁄2 50 x 65 5,250,000 7,067,000 7,672,000 10,700,000
Note: Valve settings, other than shown above, are available in 5psi increments within the pressure ranges shown.
Contact your local Watts Agent or call Customer Service (978) 689-6066 for the products with a relief setting other than shown and/or special
models of interest.

Series 315 and 415 (3⁄4" – 11⁄2")

ASME Rated and Tested Steam Safety Relief Valves
• For low pressure steam heating equipment

E 315
B Specifications
D
• NPT threaded male inlet x threaded
female outlet (drain) connection
MODEL SIZE ASME STEAM DIMENSIONS (APPROX.) WEIGHT • Standard relief set pressure 15psi
Discharge Capacity B D E (103.4 kPa)
in lbs./hr. @ 15psi in. mm in. mm in. mm lbs. kgs. • Available with lower pressure relief
315-M1 34
⁄ x ⁄ 34 375 2 ⁄ 11 16 68 38
1⁄ 35 1⁄14 32 .55 .24 settings, consult factory
415-M1 3⁄4 x 3⁄4 450 213⁄16 71 15⁄16 33 11⁄4 32 .70 .31 • Model 315 – 3⁄4" x 3⁄4" (20 x 20mm),
415-M1 1x1 643 31⁄8 78 111⁄16 43 15⁄8 41 .91 .41 Model 415 – 3⁄4" x 3⁄4" (20 x 20mm),
415 11⁄4 x 11⁄2 1265 43⁄4 121 23⁄8 60 21⁄8 54 2.00 .91 1" x 1" (25 x 25mm), 11⁄4" x 11⁄2" (32 x
415 11⁄2 x 2 1860 57⁄16 138 25⁄8 67 25⁄16 59 3.00 1.36 40mm), and 11⁄2" x 2" (40 x 50mm)
For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 21
 Series Fig. 10 (3⁄4" – 3")
Steam Boiler Safety Relief Valves
• Series Fig. 10 are cast iron ASME section IV safety relief valves
• For low pressure steam heating boilers and associated equipment with operating
2

pressures up to 15psi (103.4 kPa)

Fig. 10
Relief Valves

Specifications
• Sizes 3⁄4" – 3" (20 – 80mm), NPT male x female outlet (drain) connection.
• Cast iron body is rated at 15psi (103.4 kPa) at saturated steam A
temperature 250°F (121°C)
• Standard pressure ratings for saturated steam service are 5 – 15psi (34.5 – 103.4 kPa)
C
For additional information, request literature PG-SSRV.

B
D

MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A B C D
in. mm in. mm in. mm In. mm In. mm lbs. kgs.
Fig. 10† 34⁄ x1 20 x 25 21⁄4 57 35⁄16 84 13⁄16 30 21⁄8 54 1 .5
Fig. 10* 1 x 11⁄4 25 x 32 3 76 4 102 13⁄8 35 25⁄8 67 2 .9
Fig. 10* 11⁄4 x 11⁄2 32 x 40 31⁄4 83 5 127 115⁄16 49 3 76 3 1.4
Fig. 10† 11⁄2 x 2 40 x 50 33⁄8 86 51⁄8 130 2 51 37⁄16 81 4 1.8
Fig. 10‡ 2 x 21⁄2 50 x 65 41⁄2 114 611⁄16 171 211⁄16 68 4 102 8 3.6
Fig. 10Δ 21⁄2 x 21⁄2 65 x 65 51⁄4 133 83⁄8 213 4 102 43⁄8 111 14 6.4
Fig. 10‡ 3x3 80 x 80 6 150 91⁄2 241 43⁄8 111 51⁄8 130 22 10.0
Set At: †(12psi/82.7 kPa),*(10psi/68.9 kPa), Δ(8psi/55.2 kPa), ‡(5psi/34.5 kPa)

Fig. 10 ASME Section IV Series Valves

Saturated Steam Capacities (lbs./hr. @ 90% rating and 331⁄3% Overpressure)
MODEL SET PRESSURE INLET X OUTLET (IN.)
psi kPa 34
⁄ x1 1 x 11⁄4 11⁄4 x 11⁄2 11⁄2 x 2 2 x 21⁄2 21⁄2 x 21⁄2 3x3

Fig. 10 5* 34 230 409 649 924 1637 2557 3698

Fig. 10 10* 69 318 565 882 1276 2260 3530 5106
Fig. 10 15 103 394 700 1093 1581 2801 4375 6328
* Capacities for 5 and 10psi are not certified by ASME National Board.
contact your local Watts Agent or call Customer Service at (978) 689-6066 for products with pressure ratings other than shown

Series Fig. 31, 41, 41A (1⁄2" – 6")

Safety Relief Valves
Specifications
• Available in bronze with threaded connections or cast iron with flanged connections
• Fig. 31 – ASME Section I valves for steam boilers with pressures to 250psi (17.2 bar)
• Fig. 41 – For ASME Section VIII steam service handling saturated steam to
250psi (17.2 bar)
• Fig. 41A – For ASME Section VIII service on air, gas and vapors to 250psi (17.2 bar)
• Saturated Steam Capacities; see tables on page 16
• Next day service available Fig. 31, 41, 41A

For additional information, request literature PG-SSRV.

22 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Fig. 31 ASME Section I Series Valves Saturated Steam Capacities
(lbs/hr @ 90% rating and 3% overpressure)
MODEL SET PRESSURE INLET X OUTLET (IN.)
psi kPa 12 ⁄ x 3⁄4 34 ⁄ x1 1 x 11⁄4 11⁄4 x11⁄2 11⁄2 x 2 2 x 21⁄2
Fig. 31 5* 34 96 171 269 439 686 1126

2
Fig. 31 10* 69 133 238 372 609 952 1562
Fig. 31 15 103 161 288 451 738 1154 1893

Relief Valves
Fig. 31 20 138 189 337 528 864 1351 2216
Fig. 31 25 172 216 386 605 990 1548 2540
Fig. 31 30 207 244 435 683 1116 1745 2863
Fig. 31 50 345 355 632 991 1621 2543 4157
Fig. 31 75 517 493 878 1377 2251 3519 5774
Fig. 31 100 689 631 1124 1763 2882 4505 7391
Fig. 31 125 861 769 1370 2148 3512 5491 9008
Fig. 31 150 1034 907 1616 2534 4143 6477 10625
Fig. 31 175 1206 1045 1862 2920 4773 7462 12242
Fig. 31 200 1378 1183 2108 3306 5404 8448 13859
Fig. 31 225 1550 1321 2354 3691 6035 9434 15477
Fig. 31 250 1723 1459 2600 4077 6665 10419 17094
* Capacities for 5 and 10psi are not certified by ASME National Board.

Fig. 41 ASME Section VIII Series Valves Saturated Steam Capacities

(lbs/hr @ 90% rating and 10% overpressure)
MODEL SET PRESSURE INLET X OUTLET (IN.)
psi kPa 12 ⁄ x 3⁄4 34 ⁄ x1 1 x 11⁄4 11⁄4 x11⁄2 11⁄2 x 2 2 x 21⁄2
Fig. 41 5* 34 104 185 289 473 739 1213
Fig. 41 10* 69 141 250 393 642 1003 1646
Fig. 41 15 103 176 361 491 802 1254 2057
Fig. 41 20 138 203 361 566 925 1445 2371
Fig. 41 25 172 229 409 641 1047 1637 2686
Fig. 41 30 207 256 456 716 1170 1829 3000
Fig. 41 50 345 374 666 1045 1709 2672 4384
Fig. 41 75 517 522 930 1458 2383 3726 6113
Fig. 41 100 689 669 1193 1870 3058 4780 7843
Fig. 41 125 861 817 1456 2283 3732 5835 9572
Fig. 41 150 1034 965 1719 2696 4407 6889 11302
Fig. 41 175 1206 1113 1982 3108 5031 7943 13032
Fig. 41 200 1378 1260 2245 3521 5756 8998 14761
Fig. 41 225 1550 1408 2508 3933 6430 10052 16491
Fig. 41 250 1723 1556 2771 4346 7105 11106 18221
* Capacities for 5 and10psi are not certified by ASME National Board.

Fig. 41A ASME Section VIII Air Capacity Ratings

(SCFM @ 90% rating and 10% overpressure)
MODEL SET PRESSURE INLET X OUTLET (IN.)
psi kPa 12
⁄ x 3⁄4 34
⁄ x1 1 x 11⁄4 11⁄4 x11⁄2 11⁄2 x 2 2 x 21⁄2
Fig. 41A 5* 34 37 65 102 167 261 428
Fig. 41A 10* 69 50 89 140 228 356 585
Fig. 41A 15 103 63 111 175 285 446 732
Fig. 41A 20 138 72 128 201 329 514 844
Fig. 41A 25 172 82 145 228 373 583 956
Fig. 41A 30 207 91 162 255 416 651 1068
Fig. 41A 50 345 133 237 372 608 951 1550
Fig. 41A 75 517 185 331 519 848 1326 2176
Fig. 41A 100 689 238 424 665 1088 1701 2791
Fig. 41A 125 861 291 518 812 1328 2076 3407
Fig. 41A 150 1034 343 611 959 1568 2452 4022
Fig. 41A 175 1206 396 705 1210 1808 2827 4638
Fig. 41A 200 1378 448 799 1253 2048 3202 5254
Fig. 41A 225 1550 501 892 1400 2288 3578 5869
Fig. 41A 250 1723 553 986 1547 2528 3953 6435
Fig. 41A 275 1895 606 1080 1693 2769 4328 7101
Fig. 41A 300 2067 659 1173 1840 3009 4703 7716
* Capacities for 5 and 10psi are not certified by ASME/National Board.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 23
 Series 1L, 1XL, 10L and 100XL ( ⁄ " , 12 34
⁄ ")
Self-closing T&P Safety Relief Valves for Hot Water Storage
Tanks and Heaters
• These combined two-in-one Temperature and Pressure relief valves provide the
2

least expensive and proven means for protection against both excessive
temperature and pressure emergency conditions
Relief Valves

• Fully automatic temperature and pressure relief protection for domestic hot water
supply tanks and heaters based on the latest ANSI Z21.22 listing requirements for
temperature discharge capacity
• Reliable and proven means of protection against excessive temperature
and pressure build-up in domestic hot water systems A
100XL
• Includes test lever
• For water heaters from 15,000 to 105,000 BTU/hr Standards
• NPT male inlet and female outlet • ANSI Z21.22 and ASME Section IV
B Rated†, CSA Listed.
Note: See pg. 25 for information on domestic
expansion tanks (DET) to control thermal
expansion in domestic water closed systems. D Specifications
For additional information, • Temperature Relief: 210°F (99°C).
request literature ES-10L, ES-100XL, Pressure Relief Range: 75 – 150psi
ES-SL100XL/L100XL/LL100XL/ LLL100XL. (5.2 – 10.3 bar).
T Standard Pressure Relief Settings:
75psi (5.2 bar), 100psi (6.9 bar),
125psi (8.6 bar) or 150psi (10.3 bar)

MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT CSA

A B D T Temp. Steam
in. mm in. mm in. mm in. mm in. mm oz. gm. Rating BTU/hr.

1L2† 12
⁄ 15 13⁄4 43 31⁄2 89 78
⁄ 22 2 50 10 284 15,000
1XL† 1⁄2 15 13⁄4 43 31⁄2 89 7⁄8 22 3 76 12 340 15,000
1XL-8† 1⁄2 15 13⁄4 43 31⁄2 89 7⁄8 22 8 203 16 454 15,000
10L-2 3⁄4 20 13⁄4 43 31⁄2 89 11⁄8 29 2 50 10 284 80,000
100XL 3⁄4 20 13⁄4 43 31⁄2 89 11⁄8 29 3 76 12 340 105,000
100XL-8 3⁄4 20 13⁄4 43 31⁄2 89 11⁄8 29 8 203 14 397 105,000
L100XL-3 3⁄4 20 13⁄4 43 41⁄4 108 21⁄8 41 3 76 12 340 105,000
SL100XL 3⁄4 20 13⁄4 43 43⁄8 111 11⁄4 32 31⁄2 89 12 340 105,000
LL100XL 3⁄4 20 13⁄4 43 43⁄4 121 2 50 21⁄2 64 12 340 105,000
LLL100XL-Z5 3⁄4 20 13⁄4 43 51⁄4 133 21⁄2 64 21⁄8 54 12 340 105,000
A = overall width of the valve. B = overall height of the valve, with lever closed, not including thermostat element length. D = length of shank , from
shoulder under outlet orifice overhang to inlet orifice edge. T = length of thermostat element, measured from inlet orifice edge to end of thermostat.
Set @ 150psi (10.3 bar). Consult your local Watts Agent or call Customer Service at (978) 689-6066 for ordering codes of valves with pressure
relief settings of 75, 100, 125psi (5.2, 6.9, 8.6 bar).
†1 2
⁄ " (15mm) valves are not ASME rated.

Series 210-5 (3⁄4")

Immersion-Type, Temperature Gas Shutoff for Hot
Water Storage Heaters.
• Models L210-5 M2, LL210- • Design certified by CSA
• Protects against excessive tempera-
tures in gas water heaters 5M2, LLL210-5 feature extend- • CSA ratings: natural gas
ed shanks for use with heaters 150,000 BTU/hr., liquefied
• Shuts off the gas supply to the water
containing up to 3" of insulation petroleum gas 243,000
10 2
M2

M2

M2
L2 5 M

heater in the event that the water

Specifications BTU/hr
-5

-5
0-

0-

temperature reaches 210°F (98.9°C)

10
21

21

L2

• Tank connection 3⁄4" (20mm)

LL

• Used in conjunction with Model 3L

LL

For additional information,

pressure relief valve, p.20 NPT male request literature ES-210-5.
• Gas inlet and outlet connection
1⁄2" (15mm) NPT female

24 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
ASME Rated Series 40, 140,
240, 340, 342 ( ⁄ " – 2") 34

Automatic Reseating T&P Relief Valves for Hot Water Supply

Tanks and Heaters.

2
• The combined two-in-one Temperature and Pressure relief valve provides the least

Relief Valves
expensive and most proven means for protection against both excessive tempera-
ture and pressure.
• Fully automatic temperature and pressure relief protection for hot water supply
tanks and heaters based on the latest ANSI Z21.22 Listing Requirements for
temperature discharge capacity.

Standards 340
ANSI Z21.22 and ASME Section IV Rated, CSA Listed.

Specifications Features
• Temperature relief 210°F (98.9°C). Pressure range 75 – 150psi (5.2 – 10.3 bar). • Bronze body construction
Standard settings: 75psi (5.2 bar); 100psi (6.9 bar); 125psi (8.6 bar); and 150psi
• Tamper-resistant bonnet screws
(10.3 bar). See Dimensions/Wgts. chart on next page for inlet and outlet connec-
tion type and sizes. • Series 40 and 140 feature a unique
Series 40, 140 nominal size 3⁄4" (20mm) thermostat with a special thermo-
bonded coating
• To protect gas, electric or oil-fired storage water heaters rated between 180,000 to
200,000 BTU/Hr. from excessive heat or pressure build up, choose the 3⁄4" (20mm) • 1" (25mm) and above sizes Model M2,
model 40 or 140. Tested under ANSI Z21.22 with ratings as certified and listed by M4 and M14 are standardly furnished
CSA. Series 40, 140 and 240 nominal size 1" (25mm). with stainless steel thermostat tube

• For gas or oil-fired storage water heaters rated between 450,000 and 730,000 • Accurate and proven thermostat,
BTU/Hr., choose the 1" (25mm) model 40, 140 or 240. Tested under ANSI Z21.22 exclusively designed and manufac-
with ratings as certified and listed by CSA. tured by Watts
Series 340, 342 nominal sizes 11⁄2" x 2" (40 x 50mm)
• For gas or oil-fired hot water supply boilers rated over 730,000 BTU/Hr. output
heating for water and for steam coil storage water heaters, choose the Model 340
or 342. Tested under ANSI Z21.22 with ratings as certified and listed by CSA.

Special Model
Special Model 340X-8 M4Z available in 11⁄2" (40mm) size only. Pressure setting is 175psi
(12.1 bar). Temperature relief at 210°F (98.9°C); Certified by CSA only.

For additional information, request literature ES-40, 140, 240, 340, or ES-LL/LLL-40XL.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 25
2

1.656
1.781
Relief Valves

3.656

1" LL40XL-Z2 34
⁄ " LL40XL-Z2 34
⁄ " LLL40XL-Z2

T
Series 40L

MODEL SIZE (DN) THERMOSTAT LENGTH DIMENSIONS (APPROX.) WEIGHT RATINGS

CSA TEMP. ASME PRESSURE ASME PRESSURE
M = MALE T A B STEAM RATING STEAM RATING STEAM RATING
F = Female less BTU/hr.** BTU/hr.**
Inlet x Outlet (below inlet) thermostat @75psi @150psi
in. x in. mm x mm in. mm in. mm in. mm lbs. kgs. BTU/hr. set pressure set pressure

40L-3 34
⁄ M x 3⁄4F 20 x 20 3 76 25⁄8 67 55⁄8 143 13⁄4 .79 180,000 777,600 1,437,600
40XL-5 34
⁄ M x3⁄4F 20 x 20 5 127 25⁄8 67 55⁄8 143 13⁄4 .79 205,000 777,600 1,437,600
40XL-8 3⁄4M x 3⁄4F 20 x 20 8 200 25⁄8 67 55⁄8 143 13⁄4 .79 205,000 777,600 1,437,600
LL40XL 3⁄4M x 3⁄4F 20 x 20 31⁄2 89 25⁄8 67 55⁄8 143 11⁄2 .68 205,000 777,600 1,437,600
LLL40XL 3⁄4M x 3⁄4F 20 x 20 5 127 25⁄8 67 75⁄8 194 2 .90 205,000 777,600 1,437,600
140S-3 3⁄4F x 3⁄4F 20 x 20 3 76 25⁄8 67 55⁄8 143 13⁄4 .79 180,000 777,600 1,437,600
140X-5 3⁄4F x 3⁄4F 20 x 20 5 127 25⁄8 67 55⁄8 143 13⁄4 .79 205,000 777,600 1,437,600
140X-8 3⁄4F x 3⁄4F 20 x 20 8 200 25⁄8 67 55⁄8 143 13⁄4 .79 205,000 777,600 1,437,600
40L-2 1M x 1F 25 x 25 2 50 2 3 ⁄4 70 61⁄4 158 21⁄4 1.00 450,000 1,155,000 2,134,000
40XL-4 1M x 1F 25 x 25 4 100 2 3 ⁄4 70 61⁄4 158 21⁄4 1.00 500,000 1,555,000 2,134,000
40XL-7 1M x 1F 25 x 25 7 178 2 3 ⁄4 70 61⁄4 158 21⁄4 1.00 500,000 1,555,000 2,134,000
LL40XL 1M x 1F 25 x 25 3 76 2 3 ⁄4 70 61⁄2 165 2 .90 500,000 1,155,000 2,134,000
*140S-3 1F x 1F 25 x 25 3 76 3 76 51⁄2 140 21⁄4 1.00 570,000 1,670,000 3,085,000
*140X-6 1F x 1F 25 x 25 6 150 3 76 51⁄2 140 21⁄4 1.00 670,000 1,670,000 3,085,000
*140 X-9 1F x 1F 25 x 25 9 229 3 76 51⁄2 140 21⁄4 1.00 670,000 1,670,000 3,085,000
*N240X-6 1F x 1F 25 x 25 6 150 3 3 ⁄8 86 65⁄8 168 23⁄4 1.20 730,000 2,195,000 4,059,000
*N240X-9 1F x 1F 25 x 25 9 229 3 3 ⁄8 86 65⁄8 168 23⁄4 1.20 730,000 2,195,000 4,059,000
*N241X-5 11⁄4M x 1F 32 x 25 5 127 33⁄8 86 65⁄8 168 23⁄4 1.20 730,000 2,195,000 4,059,000
*N241X-8 11⁄4M x 1F 32 x 25 8 200 3 3 ⁄8 86 65⁄8 168 23⁄4 1.20 730,000 2,195,000 4,059,000
*340-3 11⁄2F x 11⁄2F 40 x 40 3 76 41⁄2 114 93⁄4 248 7 3.00 1,150,000 3,450,000 6,379,000
*340X-8† 11⁄2F x 11⁄2F 40 x 40 8 200 41⁄2 114 93⁄4 248 8 3.60 1,150,000 3,450,000 6,379,000
*342-3 2M x 11⁄2F 50 x 40 3 76 41⁄2 114 93⁄4 248 7 3.00 1,150,000 3,450,000 6,379,000
*342X-8 2M x 11⁄2F 50 x 40 8 200 41⁄2 114 93⁄4 248 8 3.60 1,150,000 3,450,000 6,379,000
* Standardly furnished with stainless steel thermostat tube. †340X-M4Z – Temperature Relief of 210°F, Certified CSA only.
** ASME capacities are steam pressure ratings at the indicated set pressure and do not reflect the CSA temperature relieving capacity of the
valves for selection purposes. Standard pressure relief setting: 75, 100, 125 and 150psi (5.2, 6.9, 8.6, and 10.3 bar).
Set @ 150psi (10.3 bar).
26 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 3L, 53L (1⁄2", 3⁄4")
Poppet Type Pressure Relief Valves for Protection Against
Excessive Pressure
3L – ASME rated, design certified and listed by CSA. MIL Spec MIL-V-136-10 Type 1. Size:

2
3⁄4" (20mm), NPT male inlet x NPT female (drain) outlet. ASME construction and tested, listed

and certified by the National Board of Boiler and Pressure Vessel Inspectors. Pressure range
75 – 150psi (5.2 – 10.3 bar). Standard setting 75psi (5.2 bar). Optional setting 100, 125,

Relief Valves
150psi (6.9, 8.6, 10.3 bar). Used in conjunction with Model 210 gas shutoff valve, p.17. 3L
53 – without test lever.
• Sizes: 1⁄2", 3⁄4" (15, 20mm), NPT male inlet x NPT female (drain) outlet
• Pressure Range: 75 – 175psi (5.2 – 12.1 bar)
• Standard pressure relief setting is 75psi (5.2 bar). Optional settings 100, 125 or 150psi
(6.9, 8.6, or 10.3 bar)
53L – same as Model 3L except 1⁄2" (15mm) inlet/outlet. Includes test lever. ANSI Z21.22
“Relief Valves for Hot Water Supply Systems”. Design certified and listed by CSA. Does not
comply with ASME requirements. UL Listed.
FP53L – for fire protection grid systems; protects against excessive pressure from thermal
expansion or line surge. Size: 1⁄2" (15mm). Pressure relief set at 175psi (12.1 bar). UL Listed.
For more products to protect against thermal expansion, see pages 25 and 27.
For additional information, request literature ES-3L/53L or ES-FP53L.

Series 30 (1⁄2")
Pressure Relief Valves
• Pressure relief only.
30L – with test lever; not diaphragm activated. Nominal size: 1⁄2" (15mm), NPT male inlet x
female (drain) outlet. Standard Pressure Setting: 75psi (5.2 bar). Optional settings 100, 125
and 150psi (6.9, 8.6, 10.3 bar).
30L-Z1 – well system relief valve. Capacity 20 gpm (76 lpm) at 10psi (68.9kPa) over 75psi 30L
(516.7 kPa) set pressure
N30L – with test lever. Pressure Range: 30 – 60psi (206.7 – 413.4 kPa). Standard settings
30 – 45psi (206.7 – 310 kPa)
N30 – without test lever. Pressure Range: 5 – 25psi (34.5 – 172.4 kPa)
For additional information, request literature ES-30.

Series 530C (1⁄2" – 3⁄4")

Calibrated Pressure Relief Valves
• Adjustable pressure relief range 50-175psi (3.4 – 12.1 bar)
• Designed for use as protection against excessive pressure build-up in systems
containing water, oil and air
530FP – for fire protection systems.
530C
Specifications
• Nominal sizes: 1⁄2" or 3⁄4" (15 – 20mm), NPT male inlet x 1⁄2" (15mm) NPT
female (drain) outlet
• Maximum Working Pressure: 300psi (20.7 bar)
• Maximum Working Temperature: 180°F (82°C)
For additional information, request literature ES-530C.

Series H32 (1⁄2" – 3⁄4")

Hose Connection Pressure Relief Valve
• Has a 3⁄4" hose connection inlet for ease of installation

Specifications H32
• Set at 80psi or 100psi (5.5 bar or 6.9 bar)
For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 27
 Model 5300A (1⁄2")
Poppet-Type, Compact By-pass Relief Valve
• Bronze body construction
• “T” handle facilitates pressure adjustment
2

Specifications 5300A
Relief Valves

• Nominal size: 1⁄2" (15mm), NPT male inlet x female outlet

• Pressure Range: 0 – 250psi (0 – 17.2 bar)

For additional information, request literature ES-5300A.

Series BP30 (1⁄2")

By-pass Control Relief Valves
• Controls liquid pressure as supplied by a positive pressure pump
• Protects equipment by operating at the desired pressure setting and allows excess
volume to be bypassed back to the source

Specifications
• Size 1⁄2" (15mm), NPT male inlet x female outlet
• Pressure Range: 10 – 175psi (.069 – 12.1 bar) BP30
• Maximum Temperature: 180°F (82°C)
• Bronze body, sensitive rubber diaphragm and special Teflon® disc

Models
BP30A – adjustable 10 – 50psi (68.9-344.8 kPa), Model BP30B,
45 – 100psi (310.3 – 689.5 kPa) Model BP30C 75 – 175psi (5.2 – 12.1 bar)

For additional information, request literature ES-BP30.

28 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Spacemaker® by Watts
Outside Water Heater Enclosures
• Allows water heater to be installed outdoors
• Galvanized steel enclosures

Specifications/Models
• Enclosures available for water heaters 20 to 100 gallons in size

3
• Three sided, back sections are also available
• No screws, nuts or bolts required
B-26 – 26" Back Section for R-26
R-24 BL – for 20 – 50 gallon tank size, 24" Square x 721⁄2" Tall

Water Heater Installation Products

Enclosures
WPE-24 (1) – for 20 – 50 gallon tank size, 24" Cabinet w/o Venting or Louvers B-30 – 30" Back Section for R-30BL
R-26 – for 20 – 65 gallon tank size, 26" Wide x 24" Deep x 721⁄2" Tall Enclosures
R-30 BL – for 50 – 80 gallon tank size, 30" Square x 721⁄2" Tall B-36 – 36" Back Section for C-36
C-36 Com – for 80 – 100 gallon tank size, 36" Square x 82" Tall Enclosures
B-24 – 24" Back Section for R-24BL Enclosures
For additional information,
B-24 WPE – Back Section for WPE-24 request literature F-Spcmkr.

Spacemaker® by Watts
Water Heater Stands
Series AS — Preassembled
• Raises water heater flame element 18" above the floor per safety code requirements
• Reduces risk of fire, explosion, and property damage
• Galvanized steel construction

Specifications/Models
• Stands available for water heaters 40 to 100 gallons in size.
AS-20 – for up to 52 gallon tank, Size 20" x 20" x 16"
AS-22 – for up to 65 gallon tank, Size 22" x 22" x 16"
AS-26 – for up to 75 gallon tank, Size 26" x 26" x 16"
AS-30 – for up to 100 gallon tank, Size 30" x 30" x 16"

For additional information, request literature F-Spcmkr.

Model DPS Drip Pan Stand

• Round Stand includes built-in drip pan

Specifications/Models
• Holds up to 52 gallon water heater
• PVC drain connector
• All clip together design
DPS-20 – for up to 52 gallon tank, Size 22" x 16"

For additional information, request literature F-Spcmkr.

Model ENS Enclosed Stand

• For use in food processing areas
• Fully enclosed to prevent the base from being used as a storage area

Specifications/Models
• Floating seismic clips for easy bolting to the wall
ENS-20 – for up to 40 gallon tank, Size 20" x 20" x 16"

For additional information, request literature F-Spcmkr.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 29
 Spacemaker® by Watts
Heavy-duty Water Heater Restraints
Series E-50, E-100 — Double
Straps for Tight Spacing
• Use for optimal security
• Specially designed for cabinets and space limited installations
3

Specifications/Models
• Accommodates up to 100 gallon water heater
Water Heater Installation Products

• Double strapping system

• Cradles the tank with gussets for added security
• Fast convenient front tensioning of the restraint
E-50 – for up to 52 gallon tank. Double strapping system for tight spaces and/or cabinets
where hardware needs to locate behind the water heater
E-100 – for up to 100 gallon tank. Double strapping system for tight spaces and/or
cabinets where hardware needs to locate behind the water heater
For additional information, request literature F-Spcmkr.

Series FS — Free Standing

• Allows safe placement of the water heater anywhere on roof or floor
• Mounts to the roof or floor by bolting straight through or with the use of a floating clip

Specifications/Models
• Accommodates up to 100 gallon water heaters
• Heavy duty angle iron frame complete with a E-100 restraint
FS-26 – for up to 65 gallon tank; super heavy duty construction for installations where no
wall is available for mounting, platform is 26" square
FS-36 – for up to 120 gallon tank; super heavy duty construction for installations where no
wall is available for mounting, platform is 36" square

Series WM — Wall Mounted

• Allows safe placement of the water heater anywhere on the wall
• Perfect for industrial applications

Specifications/Models
• Accommodates up to 120 gallon water heaters
• Heavy duty wall mount system includes a E-100 restraint
WM-26 – for up to 65 gallon tank; super heavy duty construction for installations against
the wall where the water heater needs to be elevated, platform is 26" square
WM-30 – for up to 120 gallon tank; super heavy duty construction for installations where
the water heater needs to be elevated, platform is 30" square

Series TSE — Water Heater Straps

for Zero Clearance
• For zero clearance water heaters
• Quick easy installation — Bolts directly into wall studs
• Adjusts easily to fit water heater

Specifications/Models
• Accommodates up to 75 gallon water heater
• Kit contains four straps for restraining top and bottom of water heater
• Lag bolts are pre-installed & held with paper keepers to prevent dropping behind the tank
TSE-75 – for up to 75 gallon tank; simple double straps for
across-the-front installations
TSE-75P (Plastic wrap) – same as TSE-75 except straps are packed in heavy duty
polyolefin plastic shrink wrap
30 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Spacemaker® by Watts
Water Heater Restraints
Series E-75, E-120 – Easy Adjust
Water Heater Straps
• Quick easy installation — Bolts directly into wall studs
• Adjusts easily to fit water heater

3
Specifications Models
• Accommodates up to 75 gallon E-75 – for up to 75 gallon tank. Provides E-120 – for up to 120 gallon tank, same as

Water Heater Installation Products

water heater great flexibility in strapping the water heater, the E-75 except it comes with enough strap
• Kit contains four straps for restraining either to wrap the water heater with a non- to encircle or go across the front of a 120
top and bottom of water heater flammable back spacer or strap across-the gal. water heater
front like the TSE-75
• Lag bolts are pre-installed & held with For additional information,
paper keepers to prevent dropping request literature F-Spcmkr.
behind the tank

Series N36 (1⁄2", 3⁄4")

Water Service Vacuum Relief Valves
• Automatically vents a closed system if vacuum occurs
• Allows air to enter the system
• Relieves vacuum conditions which could siphon the water from the system and burn out
a water heater or collapse a tank
N36
Features
Specifications Standards • Opens at less than 1⁄2" (15mm) vacuum
• Maximum Working Pressure: 200psi • Design certified by CSA. Tested and
(13.8 bar) rated under ANSI Z21.22 Relief Valves For additional information,
for Hot Water Supply Systems” request literature ES-N36.
• Maximum Temperature: 250°F (121°C)
• Size: 1⁄2" or 3⁄4" (15 or 20mm), NPT male CSA certified
A
inlet connection. Ventig capacity: 1⁄2" • Also suitable for steam service, max.
size (15mm) and 3⁄4" size (20mm) are 15 pressure 15psi (103.4 kPa)
cfm (425 lpm)

B
MODEL SIZE (DN) DIMENSIONS WEIGHT
A B
in. mm in. mm in. mm oz. gr.

N36 M1 12
⁄ 15 2 50 2 50 4 113
N360 M1 34
⁄ 20 2 50 2 50 4 113

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 31
 Series N360, N360I (1⁄2", 3⁄4" )
Water Service Vacuum Relief Valves
• Automatically vents a closed system if vacuum occurs
• Allows air to enter the system
• Relieves vacuum conditions which could siphon the water from the system and burn
out a water heater or collapse a tank
• Can be mounted in a vertical or horizontal position
N360 N360I
3

Specifications
• Maximum Working Pressure: 200psi (13.8 bar)
Water Heater Installation Products

• Maximum Temperature: 250°F (121°C)

Standards
• Design certified by CSA. Tested and rated under ANSI Z21.22 “Relief Valves for Hot
Water Supply Systems.” CSA certified
• Also suitable for steam service, max. pressure 15psi (103.4 kPa)

Features
• Opens at less than 1⁄2" (15mm) vacuum B
A
For additional information, request literature ES-N360/N360I.

MODEL SIZE (DN) WEIGHT C

A B C B A
in. mm in. mm in. mm in. mm oz. gm.
N360 12⁄ 15 12
1⁄ 38 5 16
2 ⁄ 58 - - 9 255
N360 34⁄ 20 11⁄2 38 23⁄16 55 - - 9 255
N360I 3⁄4 FNPT x 3⁄4 MNPT 20 x 20 23⁄4 70 17⁄8 48 11⁄2 38 13 369
N360 N360I

Models 100DT, 100DT-A (3⁄4") 100DT-A60-12

Drain Lines for T&P Relief Valves
100DT-A60
• Connects to 3⁄4" (20mm) temperature and pressure relief
valve drain connections
100DT-72
• For use on T&P relief valves with up to 105,000 BTU/hr. rating
• Requires no special tools or fittings; hand tightens to relief valve outlet 100DT
Models
100DT – for use with side mounted relief valves. Drop length is 48" (1219mm)
100DT-72 – same as above except drop length is 72" (1829mm)
100DT-A60 – for use with top mounted relief valves. Drop length is 60" (1524mm)
100DT-A60-12 – for use with center top mounted relief valve. Drop length is 60" (1524mm)

Standards For additional information, request

Drain line: Fully approved ASME A112.4.1UPC, IAPMO literature ES-100DT.
Meets Dept. of Housing and Urban Development requirements

32 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series BRV (3⁄4", 1" )
Combination Ball Valve and Relief Valve
Specifications
• Maximum Working Temperature: 210°F (99°C)
• Maximum Working Pressure: Valve body rated to 400psi (27.6 bar)
BRVT BRVP
Features THD x THD x Comp PEX x PEX x Comp
• Easy Installation – Installs in any position

3
• Low profile design
• Full port ball valve with virgin PTFE seats

Water Heater Installation Products

• Blowout proof stem
• Stainless steel spring/Viton® ball relief valve components
• Secure compression or PEX end fitting drain tube connection
• Full line of pex connections
• Available in a 75, 80, 100 or 125psi (5.2, 5.5, 6.9, or 8.6 bar) pressure setting
• Available with threaded, solder or PEX end connections
BRVP x T x P BRV
For additional information, request literature ES-BRV. PEX x THD x PEX S x S x BARB

Available Models
INLET OUTLET RELIEF OUTLET INLET OUTLET RELIEF OUTLET

Sweat Sweat PEX Sweat PEX Compression

Sweat Sweat Compression PEX PEX PEX
Thread Thread Compression Sweat Sweat Barb
PEX PEX Compression Thread Thread Barb
PEX Thread Compression PEX PEX Barb
PEX Thread PEX PEX Sweat Barb
PEX Sweat Compression PEX Thread Barb
PEX Sweat PEX Sweat PEX Barb
Thread PEX Compression Thread PEX Barb

Series DET-M1
Potable Water Expansion Tanks for Domestic
Hot Water Systems
• Controls thermal expansion of water in open domestic hot water supply systems
• Absorbs the increased volume of water generated by the hot water heating source
keeping system pressure below the pressure relief setting of the T&P relief valve
DET-5-M1
• May be used with all types of direct-fired water heaters (gas, oil or electric) and all
types of hot water storage tanks
• Its pre-pressurized steel tank uses an expansion membrane to prevent air/water
contact for long system life

For additional information, request literature ES-DET-M1. Standards

For information on ASME rated tanks, request literature ES-DETA. Listed by IAPMO, Certified to ANSI/NSF61
MODEL DET-5-M1 DET-12-M1 DET-20-M1 DET-35-M1

Max. Pressure – psi 150 150 150 150 Features

Max. Temperature – °F 200 200 200 200 • Rugged butyl diaphragm
Tank Volume – Gal. 2.1 4.5 8.5 14.00
Tank Acceptance – Gal. .85 1.8 3.2 5.6 • In-line and free-standing models
Air Precharge – psi 40 40 40 40
Connection Size – inches† 3⁄4 Male 3⁄4 Male 3⁄4 Male 1 Female
Diameter – inches 8.5 10.0 12.5 16.0
Length – inches 11.5 115.0 19.2 21.7
Weight – lbs. 7 10 15 32
† – Connection size: (M)=Male, (F)=Female.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 33
 Series DETA 5 – DETA 210
ASME Pressurized Expansion Tanks for Potable Hot Water
• Designed to accept the expanded volume of hot water keeping the system
pressure below the relief valve setting
• For commercial and industrial potable hot water applications
• ASME fixed bladder type precharged expansion tank
DETA
3

Specifications
• Maximum Working Pressure: 150psi (10.3 bar) Precharged to 40psi (275 kPa)
Water Heater Installation Products

• Maximum Temperature: 240°F (115°C )

For additional information, request literature ES-DETA.

Features
• ASME Section VIII Construction
• Fixed Butyl Bladder (FDA approved)
• Stainless Steel System Connection
• Precharged to 40psi (275 kPa) (Field Adjustable)

Construction
Shell: Carbon steel
System Connection: Stainless steel
Bladder: Butyl (FDA approved)
Exterior: Primer coated

Series PLT
Potable water expansion tanks
• Designed to take in water displaced by thermal expansion and to maintain
balanced pressure throughout the potable water supply
• Expansion tanks for all types of Direct Fired Hot Water Heater (gas, oil or electric)
and hot water storage tanks
PLT-5
Specifications
• Maximum Working Pressure: 150psi (10.3 bar)
• Maximum temperature 200°F (93°C) Features
• Polypropylene liner
For additional information, request literature ES-PLT.
• Rugged flexible butyl diaphragm
• Field adjustable pre-charge
MODEL PLT-5 PLT-12
• IAPMO and NSF listed
Max. Pressure – psi 150 150
• Can be used with most standard
Max. Temperature °F 200 200
water heater and storage tanks
Tank Volume – Gal 2.1 4.5
Tank Acceptance – Gal. 1.26 2.8
Air Precharge – psi 40 40
Connection Size – in.† 3⁄4 Male 3⁄4 Male

Diameter – inches 8 10.5

Length – inches 11 13.5
Weight – lbs. 5.5 10
† – Connection size: (M) = Male, (F) = Female.

34 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series CWH-S (5⁄8" – 7⁄8")
Flexible, Braided Stainless Steel Water Heater Connectors
• For connecting water heaters to the water supply
• Protects against the destructive effects of system pressure surges
• PVC tubing jacketed with braided stainless steel

Models
CWH-S-FF-L

3
CWH-S-FF-L – Size 3⁄4" x 3⁄4" (20 x 20mm), brass female iron pipe (FIP) threaded ends
CWH-S-AF-L – Size 5⁄8" (16mm) compression end fitting x 3⁄4" (20mm) brass
FIP threaded fitting

Water Heater Installation Products

CWH-S-AF-L – Size 7⁄8" (22mm) compression end fitting x 3⁄4" (20mm) brass
FIP threaded fitting
CWH-S-AA-L – Size 7⁄8" x 7⁄8" (22 x 22mm) compression end fittings
CWH-S-FM-L – Size 3⁄4" (20mm) brass FIP thread fitting x 3⁄4" (20mm) brass male iron
pipe threaded fitting
CWHS-AM-L – Size 7⁄8" (22mm) compression end fitting x 3⁄4" (20mm) brass male iron
pipe threaded fitting
Specifications
Maximum Pressure: 150psi (10.3 bar)
Maximum Temperature: 180°F (82°C)
All hoses are NSF61 approved for safer
drinking water

For additional information, request literature F-Flxcon.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 35
 PVS-1000
Series PVS-1000
Pre-engineered Valve Stations
Series PVS-1000 Pre-Engineered Valve Stations are custom configured water
flow control systems that are assembled from proven, reliable Watts compo-
nents to meet exacting project application requirements. Watts pre-engineered
valve stations are factory pre-assembled, tested and optionally certified by inde-
pendent agencies to ensure flow performance for critical building demands.

Benefits Applications • UL/FM, ASSE, IAPMO, USC certified

Watts pre-engineered valve stations pro- Watts pre-engineered valve stations are or listed components as required for
vide the following benefits: custom fit to your specifications and are service
• Reduction of installation time from ideal for a wide variety of flow control • Single point of connection for fire pro-
applications including: tection, potable water and irrigation
days to hours, minimizing installations
• Hospitals services (where approved by local
4

costs
• Schools codes)
• Redundant flow paths provide uninter-
rupted water flow while device is • Multi-Family Dwellings • Standard vault, vertical, and horizontal
Backflow Preventers & Accessories

being tested or maintained, reducing • Restaurants mounting configurations

overtime labor costs • Industrial Facilities • Integral slip and alignment flanges
• Operates below OSHA mandated • Other similar buildings correct for site variations and relieve
maximum noise levels pipe stress
• Corrosion resistant design reduces Features • Field proven in over 100 installations
component maintenance costs and years of history
• Maximum flow performance with low
• Optional pre-installation performance pressure drops • Expansion capability
certification ensures conformance to • Wide flow control ranges meet stan- • Built-in protection for system upsets
design criteria at site dard end emergency peak flow (i.e. seismic shocks)
• Reduction in the number of overall requirements For additional information,
components needed through Watts’ • Standard flow design to >10,000 gpm request literature PG-ValveStations.
innovative design program
• Integral backflow prevention devices,
• One supplier of components, one meter, pressure regulators, automatic
source of responsibility, Watts, a control valves, strainers, headers,
leader in valve technology for over shutoff valves, and instrumentation as
125 years needed to suit specific applications

Series BIC-1000 BIC-1000

Backflow Irrigation Control Stations Features
• Preload Pilot. The entire
Series BIC-1000 Backflow Irrigation Control Stations com-
bine the master valve, regulator valve, backflow preventer, irrigation pressure piping
preload valve and high-pressure lockout switch all in one system is maintained with
easily located component. Constructed using best prac- a preload stand-by, field
tice design principles, these systems maximize operating adjustable, low pressure
performance and reduce pipe breaks and leakage within control valve. This in
the irrigation system. Watts BIC-1000 station minimizes combination with a higher set point on the regulator
system-operating pressure during both the system opera- and master valve creates a buffer when turned on.
tion as well as when there is no flow to the system to
• High-Pressure Lockout Switch. When high pressure is detected,
reduce water line breaks, has a single warranty policy and
is pre-tested to ensure reliable operation "out of the the switch will lock out the 24V circuit; making the system inopera-
crate". ble until the problem is addressed. This prevents high pressure
shock and water hammer when the system is allowed to turn on.
• All components are flanged type, nut and bolt modular design for
easy replacement.
System Attributes • 24-hour monitoring system of the outlet pressure for excessive
• All components are above ground level on a stainless buildup above set operating pressure.
steel station
• Water is conserved by reducing or eliminating potential line breaks
• Combines the Master Valve, Regulator Valve, and caused by high pressure. The master valve/regulator is installed at
Backflow Assembly in one easily located component the backflow assembly which provides a shut-off and pressure
control of the entire system.
For additional information, request literature F-BIC-1000.

36 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
SilverEagle™
Series 757, 757N
(21⁄2" – 10")
Double Check Valve Assemblies
• Designed to prevent backflow of pollutants
that are objectionable but not toxic from entering the potable water supply 757 OSY 757N BFG
• For non-health hazard continuous pressure applications Features
• Provides protection against backsiphonage and backpressure backflow • Extremely compact design
• 70% Lighter than traditional designs
Specifications • 304 (Schedule 40) stainless steel
• Temperature Range: 33°F – 110°F (0.5°C – 43°C) housing and sleeve

4
• Maximum Working Pressure: 175psi (12.1 bar) • Groove fittings allow integral
pipeline adjustment
Models add Suffix:

Backflow Preventers & Accessories

• Patented tri-link check provides
NRS – non-rising stem resilient seated gate valves lowest pressure loss
OSY – UL/FM outside stem and yoke resilient seated gate valves • Unmatched ease of serviceability
*OSY FxG – flanged inlet gate connection and grooved outlet gate connection • Available with grooved butterfly
*OSY GxF – grooved inlet gate connection and flanged outlet gate connection valve shutoffs
*OSY GxG – grooved inlet gate connection and grooved outlet gate connection • May be used for horizontal, vertical or
BFG – 21⁄2" – 8" UL/FM grooved gear operated butterfly valves with tamper switch N pattern installations
QT – 21⁄2" – 3" quarter-turn ball valves • Replaceable check disc rubber
• Sizes 21⁄2" – 3" (65 – 80mm) available
Available with grooved NRS gate valves - consult factory* with quarter-turn ball valve shutoffs
Post indicator plate and operating nut available – consult factory*
For additional information, request literature
* Consult factory for dimensions ES-757/757N.
For WattsBox Enclosures, request literature
ES-WB.

C (open) J

D
H
A G P P1
757, 757N
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C (OSY) C (NRS) D G H I J P 757NRS 757OSY 757N NRS 757N OSY
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. lbs. kgs. lbs. kgs.
21⁄2 65 31 787 163⁄8 416 93⁄8 238 31⁄2 89 291⁄16 738 22 559 151⁄2 393 813⁄16 223 93⁄16 234 115 52 125 57 123 56 133 60
3 80 3111⁄16 805 187⁄8 479 101⁄4 260 311⁄16 94 301⁄4 768 223⁄4 578 171⁄8 435 93⁄16 233 101⁄2 267 131 59 145 66 144 65 158 72
4 100 3311⁄16 856 223⁄4 578 123⁄16 310 4 102 33 838 24 610 181⁄2 470 915⁄16 252 113⁄16 284 161 73 161 73 184 83 184 83
6 150 431⁄2 1105 301⁄8 765 16 406 51⁄2 140 443⁄4 1137 333⁄4 857 233⁄16 589 131⁄16 332 15 381 273 124 295 134 314 142 336 152
8 200 50 1270 373⁄4 959 1915⁄16 506 611⁄16 170 541⁄8 1375 405⁄8 1032 277⁄16 697 1511⁄16 399 173⁄16 437 438 199 480 218 513 233 555 252
10 250 571⁄2 1460 453⁄4 1162 2313⁄16 605 83⁄16 208 66 1676 50 1270 321⁄2 826 175⁄16 440 20 508 721 327 781 354 891 404 951 431
757BFG, 757N BFG
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C D G H I J P 757BFG 757N BFG
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.
21⁄2 65 28 711 8 203 31⁄2 89 297⁄8 759 22 559 1415⁄16 379 813⁄16 223 9 229 56 25 64 29
3 80 281⁄2 724 85⁄16 211 311⁄16 94 3011⁄16 779 223⁄4 578 157⁄16 392 93⁄16 233 91⁄2 241 54 24 67 30
4 100 293⁄16 741 815⁄16 227 311⁄16 94 3115⁄16 811 24 610 161⁄4 412 915⁄16 252 10 254 61 28 84 38
6 150 361⁄2 927 10 254 5 127 433⁄16 1097 333⁄4 857 1911⁄16 500 131⁄16 332 101⁄2 267 117 53 157 71
8 200 43 1092 121⁄4 311 61⁄2 165 511⁄16 1297 405⁄8 1032 235⁄16 592 1511⁄16 399 143⁄16 361 261 118 337 153
757QT
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C D G H I J P P1
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
21⁄2 65 2815⁄16 735 47⁄8 124 313⁄16 97 301⁄4 768 241⁄2 622 169⁄16 421 113⁄8 289 107⁄16 265 85⁄16 211 35 16
3 80 303⁄16 767 413⁄16 122 37⁄8 98 301⁄4 768 241⁄2 622 173⁄16 437 111⁄4 258 107⁄16 265 89⁄16 217 45 21

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 37
 SilverEagle™
Series 757a,
757Na (2 ⁄ " – 6") 12

Double Check Valve Assemblies

• Designed to prevent backflow of pollutants 757a OSY 757Na BFG
that are objectionable but not toxic for entering the potable water supply
• For non-health hazard continuous pressure applications
Features
• Extremely compact design
• Provides protection against backsiphonage and backpressure backflow
• 70% Lighter than traditional designs
• 304 (Schedule 40) stainless steel
Specifications
4

housing and sleeve

• Temperature Range: 33°F – 110°F (0.5°C – 43°C) • Groove fittings allow integral
• Maximum Working Pressure: 175psi (12.1 bar) pipeline adjustment
Backflow Preventers & Accessories

• Patented bi-link check provides lowest

Models pressure loss
add Suffix: • Unmatched ease of serviceability
NRS – non-rising stem resilient seated gate valves • Available with grooved butterfly
valve shutoffs
OSY – UL/FM outside stem and yoke resilient seated gate valves
• May be used for horizontal, vertical or N
*OSY FxG – flanged inlet gate connection and grooved outlet gate connection pattern installations
*OSY GxF – grooved inlet gate connection and flanged outlet gate connection • Replaceable check disc rubber
*OSY GxG – grooved inlet gate connection and grooved outlet gate connection
For additional information, request literature
BFG – UL/FM grooved gear operated butterfly valves with tamper switch ES-757a/757Na.
Available with grooved NRS gate valves - consult factory* For WattsBox Enclosures, request literature
Post indicator plate and operating nut available – consult factory* ES-WB.
* Consult factory for dimensions

C (open)
J

I
D
H
A G P P1

757a, 757Na
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C (OSY) C (NRS) D G H I J P 757a NRS 757a OSY 757Na NRS 757Na OSY
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. lbs. kgs. lbs. kgs.
21⁄2 65 – – – – – – – – 291⁄16 738 22 559 151⁄2 393 813⁄16 223 93⁄16 234 – – – – 123 56 133 60
3 80 – – – – – – – – 301⁄4 768 223⁄4 578 171⁄8 435 93⁄16 233 101⁄2 267 – – – – 144 65 158 72
4 100 – – – – – – – – 33 838 24 610 181⁄2 470 915⁄16 252 113⁄16 284 – – – – 184 83 184 83
6 150 431⁄2 1105 301⁄8 765 16 406 51⁄2 140 443⁄4 1137 333⁄4 857 233⁄16 589 131⁄16 332 15 381 273 124 295 134 314 142 336 152
Note: For 21⁄2"-4" horizontal/vertical installation, see p. 37

757a BFG, 757Na BFG

SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C D G H I J P 757a BFG 757Na BFG
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.
21⁄2 65 – – – – – – 297⁄8 759 22 559 1415⁄16 379 813⁄16 223 9 229 56 25 64 29
3 80 – – – – – – 3011⁄16 779 223⁄4 578 157⁄16 392 93⁄16 233 91⁄2 241 54 24 67 30
4 100 – – – – – – 3115⁄16 811 24 610 161⁄4 412 915⁄16 252 10 254 61 28 84 38
6 150 361⁄2 927 10 254 5 127 433⁄16 1097 333⁄4 857 1911⁄16 500 131⁄16 332 101⁄2 267 117 53 157 71
Note: For 21⁄2"-4" horizontal/vertical installation, see p. 37

38 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 774 (21⁄2" – 12")
Double Check Valve Assemblies
• Designed to prevent the reverse flow of polluted water from entering the
potable water system
• For non-health hazard continuous pressure applications
• Provides protection against backsiphonage and backpressure backflow 774OSY

Features
• Patented torsion spring check valve
Specifications provides low head loss
• Short lay length is ideally suited for

4
• Temperature Range: 33°F – 110°F (0.5°C – 43°C) retrofit installations
• Maximum Working Pressure: 175psi (12.1 bar) • Stainless Steel body is half the weight
of competitive designs reducing

Backflow Preventers & Accessories

Models installation and shipping cost
add Suffix: • Stainless steel construction provides
LF – without shutoff valves long term corrosion protection and
maximum strength
NRS – non-rising stem resilient seated gate valves
• Single top access cover with two-bolt
OSY – UL/FM outside stem and yoke resilient seated gate valves
grooved style coupling for ease of
*OSY FxG – flanged inlet gate connection and grooved outlet gate connection maintenance
*OSY GxF – grooved inlet gate connection and flanged outlet gate connection • Thermoplastic and stainless steel
*OSY GxG – grooved inlet gate connection and grooved outlet gate connection check valves for trouble-free operation
S – cast iron strainer • No special tools required for servicing
Available with grooved NRS gate valves - consult factory* • Compact construction allows for
smaller vaults and enclosures
Post indicator plate and operating nut available – consult factory*
* Consult factory for dimensions • May be installed in horizontal or
vertical flow up position
For additional information, request literature
ES-774.
For WattsBox Enclosures, request literature
ES-WB.

C
(Open)
G

N L

M A P

774
SIZE (DN) DIMENSIONS (APPROX.) STRAINER DIMENSIONS WEIGHT
A C (OSY) C (NRS) D G L P M N w/Gates w/o Gates
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm. in. mm in. mm lb. kgs. lb. kgs.
21⁄2 65 38 965 163⁄8 416 93⁄8 238 31⁄2 89 10 254 22 559 121⁄2 318 10 254 61⁄2 165 155 70 68 31
3 80 38 965 187⁄8 479 101⁄4 260 33⁄4 95 10 254 22 559 13 330 101⁄2 257 7 178 230 104 70 32
4 100 40 1016 223⁄4 578 123⁄16 310 41⁄2 114 10 254 22 559 141⁄2 368 121⁄8 308 81⁄4 210 225 102 58 26
6 150 481⁄2 1232 301⁄8 765 16 406 51⁄2 140 15 381 271⁄2 699 151⁄2 394 181⁄2 470 131⁄2 343 375 170 105 48
8 200 521⁄2 1334 373⁄4 959 1915⁄16 506 63⁄4 171 15 381 291⁄2 749 181⁄4 464 215⁄8 549 151⁄2 394 561 254 169 77
10 250 551⁄2 1410 453⁄4 1162 2313⁄16 605 8 200 15 381 291⁄2 749 191⁄2 495 26 660 181⁄2 470 763 346 179 81
12 300 571⁄2 1461 531⁄8 1349 263⁄4 679 91⁄2 241 15 381 291⁄2 749 21 533 297⁄8 759 213⁄4 552 1033 469 209 95

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 39
 Series 709 (21⁄2" – 10")
Double Check Valve Assemblies
• Designed to prevent the reverse flow of polluted water from
entering the potable water system
• For non-health hazard continuous pressure applications
• Provides protection against backsiphonage and backpressure backflow 709 OSY
Features
Specifications • Replaceable bronze seats
• Temperature Range: 33°F – 110°F (0.5°C – 43°C) • Maximum flow at low pressure drop
• Maximum Working Pressure: 175psi (12.1 bar) • Design simplicity for easy maintenance
• No special tools required for servicing
4

For additional information, request literature ES-709L.

• Captured spring assemblies for safety
For WattsBox Enclosures, request literature ES-WB.
• Approved for vertical flow up installation
Backflow Preventers & Accessories

Models
add Suffix:
BB – bronze body. Sizes 21⁄2" – 3"
(65 – 80mm)
S – cast iron strainer
S-FDA – epoxy coated cast iron strainer
LF – without shutoff valves
NRS – non-rising stem resilient seated
gate valves
OSY – UL/FM outside stem and yoke
resilient seated gate valves
QT-FDA – FDA epoxy coated quarter-turn
ball valves

C (open)
M

D
*N1 N
L
R T
A

709
SIZE (DN) DIMENSIONS (APPROX.) STRAINER DIMENSIONS WEIGHT
A C(OSY) C(NRS) D L R T M N *N1 (OSY) (NRS)
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.
21⁄2 65 39 991 163⁄8 416 93⁄8 238 31⁄2 89 24 610 4 102 3 76 10 254 61⁄2 165 10 254 195 88 167 76
3 80 40 1016 187⁄8 479 101⁄4 260 33⁄4 95 24 610 5 127 3 76 101⁄4 260 7 178 10 254 201 91 167 76
4 100 52 1321 223⁄4 578 123⁄16 310 41⁄2 114 34 864 6 152 6 152 121⁄8 308 81⁄4 210 12 305 428 194 368 167
6 150 631⁄4 1607 301⁄8 765 16 406 51⁄2 140 421⁄2 1089 11 279 71⁄2 191 181⁄2 470 131⁄2 343 20 508 860 390 627 284
8 200 75 1905 373⁄4 959 1915⁄16 506 65⁄8 168 52 1321 111⁄4 286 9 229 215⁄8 549 151⁄2 394 223⁄4 578 1448 656 1201 545
10 250 90 2286 453⁄4 1162 2313⁄16 605 8 203 64 1626 121⁄2 318 101⁄4 260 26 660 181⁄2 470 28 711 2373 1076 2003 908
*Dimensions needed for screen removal.

40 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 007 (1⁄2" – 3")
Double Check Valve Assemblies
• Designed to prevent the reverse flow of polluted water from 007M3QT
entering the potable water system
• For non-health hazard continuous pressure applications Features
• Provides protection against backsiphonage and backpressure backflow • Ease of maintenance - only one cover
• Top entry
Specifications • Replaceable seats and seat discs
12
• Temperature Range: ⁄ " – 2": 33°F – 180°F (0.5°C – 82°C); 2 ⁄ " – 3": 12 • Modular construction
33°F – 110°F (0.5°C – 43°C) continuous, 140°F (60°C) intermittent • Compact design
• Maximum Working Pressure: 175psi (12.1 bar) • Top mounted ball valve test cocks

4
• Low pressure drop
• No special tools required for servicing

Backflow Preventers & Accessories

• 1⁄2" – 1" (15 – 25 mm) have tee handles
• 1⁄2" – 2" (15 – 50mm) cast bronze
body construction
• 21⁄2" – 3" (65 – 80mm) fused epoxy
coated cast iron body
For additional information,
A
request literature ES-007 or ES-SS007.
M For WattsBox Enclosures,
C request literature ES-WB.

N1 B
H I N
F
G

007QT

SIZE (DN) DIMENSIONS (APPROX.) STRAINER DIMENSIONS WEIGHT

A B C F G H I M N *N1
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
12
⁄ 15 10 254 4 ⁄ 117 2 ⁄ 58 7 16 62 5 127 3⁄38 85 2⁄ 5 16 59 2⁄ 1 16 52 2⁄34 70 2⁄ 14 57 10 254 4.5 2
34
⁄ 20 111⁄8 282 4 102 31⁄8 79 63⁄16 157 37⁄16 87 21⁄8 54 15⁄16 33 33⁄16 81 23⁄4 70 10 254 5 2.3
1 25 131⁄4 337 51⁄8 130 4 102 71⁄2 191 33⁄8 85 111⁄16 43 111⁄16 43 33⁄4 95 3 76 12 305 12 5.4
11⁄4 32 163⁄8 416 5 127 35⁄16 84 91⁄2 241 5 127 3 76 2 50 47⁄16 113 31⁄2 89 20 508 15 6.8
11⁄2 40 163⁄4 425 47⁄8 124 31⁄2 89 93⁄4 248 513⁄16 148 31⁄8 79 211⁄16 68 47⁄8 124 4 103 223⁄4 578 15.86 7.2
2 50 191⁄2 495 61⁄4 159 4 102 133⁄8 340 61⁄8 156 37⁄16 87 211⁄16 68 55⁄16 151 5 127 28 711 25.75 11.7
*Dimensions required for screen removal.

M C (open)

D
N
E R
A

MODEL NO. SIZE (DN) DIMENSIONS (APPROX.) STRAINER DIMENSIONS WEIGHT

A C D E R M N
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lb. kgs.
007-NRS 21⁄2 65 331⁄8 841 93⁄8 238 45⁄16 109 181⁄8 460 83⁄4 222 10 254 61⁄2 165 155 70
007-OSY 21⁄2 65 331⁄8 841 163⁄8 416 45⁄16 109 181⁄8 460 83⁄4 222 10 254 61⁄2 165 158 72
007QT-FDA 21⁄2 65 331⁄8 841 63⁄8 162 45⁄16 109 181⁄8 460 83⁄4 222 10 254 61⁄2 165 155 70
007-OSY 3 80 341⁄8 867 187⁄8 479 45⁄16 109 181⁄8 460 83⁄4 222 101⁄8 267 7 178 185 84
007-NRS 3 80 341⁄8 867 101⁄4 260 45⁄16 109 181⁄8 460 83⁄4 222 101⁄8 267 7 178 185 84
007QT-FDA 3 80 341⁄8 867 63⁄8 162 45⁄16 109 181⁄8 460 83⁄4 222 101⁄8 267 7 178 155 70

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 41
 GoldenEagle®
Series 719 ( ⁄ " – 2") 12

Double Check Valve Assemblies

• Designed to protect drinking water supplies from dangerous cross-connections in
accordance with national plumbing codes and water authority requirements 719QT
• For non-health hazard continuous pressure applications Features
• Provides protection against backsiphonage and backpressure backflow • Manufactured from bronze alloy
• Separate access, top entry check
Specifications valve design
Temperature Range: 33°F – 180°F (0.5°C – 82°C) • Reversible seat disc rubber, extends
4

Maximum Working Pressure: 175psi (12.1 bar) check valve life

• Chloramine resistant elastomers
Backflow Preventers & Accessories

Models • Replaceable seats and seat discs

add Suffix: • Compact design
S – bronze strainer • Top mounted screwdriver slotted ball
LF – without shutoff valves valve test cocks
LH – locking handle ball valves • Low pressure drop
SH – stainless steel ball valve handles • 1⁄2" – 1” (15 – 25mm) have Tee handles
HC – 21⁄2" inlet/outlet fire hydrant fittings (2" valve) • No special tools required for servicing
QT – quarter-turn ball valves • Plastic on plastic check guiding
C&T – testcock caps and tethers reduces potential binding due to
add Prefix: mineral deposits
U – union connections
AQT – street elbows with quarter-turn ball valves

For additional information, request literature ES-719

For WattsBox Enclosures, request literature ES-WB

M
C
B

G H
E F

719QT
SIZE DIMENSIONS (APPROX.) STRAINER DIMENSIONS WEIGHT
A B C E(LF) F G H M N
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
12⁄ 15 97⁄8 251 311⁄16 94 215⁄16 75 53⁄4 147 21⁄2 63 111⁄16 43 34
⁄ 20 21⁄4 57 23⁄4 70 2.84 1.29
3 ⁄4 20 123⁄8 314 41⁄4 108 31⁄2 90 77⁄8 200 31⁄8 80 21⁄16 53 11⁄16 27 23⁄4 70 33⁄16 81 4.66 2.11
1 25 1413⁄16 376 49⁄16 116 313⁄16 98 95⁄8 244 313⁄16 96 27⁄16 63 15⁄16 34 3 76 33⁄4 95 7.44 3.37
11⁄4 32 187⁄8 480 61⁄8 155 51⁄16 129 1111⁄16 297 41⁄4 108 25⁄8 67 15⁄8 41 31⁄2 89 47⁄16 113 13.96 6.33
11⁄2 40 187⁄8 480 61⁄8 155 51⁄16 129 1111⁄16 297 43⁄4 120 31⁄8 79 15⁄8 41 4 102 47⁄8 124 16.12 7.31
2 50 213⁄16 538 71⁄16 179 513⁄16 147 133⁄8 340 55⁄16 136 37⁄16 87 115⁄16 49 5 127 55⁄16 151 25.66 11.64

42 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
SilverEagle™
Series 757DCDA,
757NDCDA (2 ⁄ " – 10") 12

Double Check Detector Assemblies 757DCDA OSY 757DCDA BFG

• Designed to prevent backflow of pollutants that are objectionable but not toxic for
entering the potable water supply
• For non-health hazard continuous pressure applications
• Provides protection against backsiphonage and backpressure backflow
• Primarily installed on fire sprinkler systems when it is necessary to monitor
unauthorized use of water

4
757NDCDA OSY
Specifications Features

Backflow Preventers & Accessories

• Temperature Range: 33°F – 110°F (0.5°C – 43°C)
• Extremely compact design
• Maximum Working Pressure: 175psi (12.1 bar)
• 70% Lighter than traditional designs
• 304 (Schedule 40) stainless steel
Models housing and sleeve
add Suffix: • Groove fittings allow integral
OSY – UL/FM outside stem and yoke resilient seated gate valves pipeline adjustment
BFG – 21⁄2" - 8" (65 – 200mm) UL/FM grooved gear operated butterfly valves with tamper • Patented tri-link check provides
switch
lowest pressure loss
CFM – cubic feet per minute meter
• Unmatched ease of serviceability
GPM – gallons per minute meter
• Available with grooved butterfly
*OSY FxG – flanged inlet gate connection and grooved outlet gate connection
valve shutoffs
*OSY GxF – grooved inlet gate connection and flanged outlet gate connection
• May be used for horizontal, vertical or
*OSY GxG – grooved inlet gate connection and grooved outlet gate connection
N pattern installations
Available with grooved NRS gate valves - consult factory* • Replaceable check disc rubber
Post indicator plate and operating nut available – consult factory*
For additional information, request literature
* Consult factory for dimensions literature ES-757DCDA/757NDCDA.
For WattsBox Enclosures, request literature
ES-WB.
C (open) J
I

D
H
A G P
757DCDA, 757NDCDA
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C D G H I J P 757DCDA 757NDCDA
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.
21⁄2 65 31 787 163⁄8 416 31⁄2 89 291⁄16 738 22 559 151⁄2 393 813⁄16 223 133⁄16 335 139 63 147 67
3 80 3111⁄16 805 187⁄8 479 311⁄16 94 301⁄4 768 223⁄4 578 171⁄8 435 93⁄16 233 141⁄2 368 159 72 172 78
4 100 3311⁄16 856 223⁄4 578 4 102 33 838 24 610 181⁄2 470 915⁄16 252 153⁄16 386 175 79 198 90
6 150 431⁄2 1105 301⁄8 765 51⁄2 140 443⁄4 1137 333⁄4 857 233⁄16 589 131⁄16 332 19 483 309 140 350 159
8 200 50 1270 373⁄4 959 611⁄16 170 541⁄8 1375 405⁄8 1032 277⁄16 697 1511⁄16 399 213⁄16 538 494 224 569 258
10 250 571⁄2 1460 453⁄4 1162 83⁄16 208 66 1676 50 1270 321⁄2 826 175⁄16 440 24 610 795 361 965 438
757DCDA BFG, 757NDCDA BFG
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C D G H I J P 757DCDA BFG 757NDCDA BFG

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.
21⁄2 65 28 711 8 203 31⁄2 89 297⁄8 759 22 559 1415⁄16 379 813⁄16 223 13 330 70 32 78 35
3 80 281⁄2 724 815⁄16 211 311⁄16 94 3011⁄16 779 223⁄4 578 157⁄16 392 93⁄16 233 131⁄2 343 68 31 81 37
4 100 293⁄16 741 815⁄16 227 311⁄16 94 3115⁄16 811 24 610 161⁄4 412 915⁄16 252 14 356 75 34 98 44
6 150 361⁄2 927 10 254 5 127 433⁄16 1097 333⁄4 857 1911⁄16 500 131⁄16 332 141⁄2 368 131 59 171 78
8 200 43 1092 121⁄4 311 61⁄2 165 511⁄16 1297 405⁄8 1032 235⁄16 592 1511⁄16 399 183⁄16 462 275 125 351 159

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 43
 SilverEagle™
Series 757aDCDA,
757NaDCDA (2 ⁄ " – 10") 12

Double Check Detector Assemblies 757aDCDA OSY 757aDCDA BFG

• Designed to prevent backflow of pollutants that are objectionable but not

toxic for entering the potable water supply
• For non-health hazard continuous pressure applications
• Provides protection against backsiphonage and backpressure backflow
• Primarily installed on fire sprinkler systems when it is necessary to monitor
4

unauthorized use of water

757NaDCDA OSY
Specifications
Features
Backflow Preventers & Accessories

• Temperature Range: 33°F – 110°F (0.5°C – 43°C)

• Maximum Working Pressure: 175psi (12.1 bar) • Extremely compact design
• 70% Lighter than traditional designs
Models add Suffix: • 304 (Schedule 40) stainless steel
OSY – UL/FM outside stem and yoke resilient seated gate valves housing and sleeve
BFG – UL/FM grooved gear operated butterfly valves with tamper switch • Groove fittings allow integral
CFM – cubic feet per minute meter pipeline adjustment
GPM – gallons per minute meter • Patented bi-link check provides
*OSY FxG – flanged inlet gate connection and grooved outlet gate connection lowest pressure loss
*OSY GxF – grooved inlet gate connection and flanged outlet gate connection • Unmatched ease of serviceability
*OSY GxG – grooved inlet gate connection and grooved outlet gate connection
• Available with grooved butterfly
Available with grooved NRS gate valves - consult factory* valve shutoffs
Post indicator plate and operating nut available – consult factory* • May be used for horizontal, vertical or
* Consult factory for dimensions N pattern installations
For additional information, request literature ES-757aDCDA/757NaDCDA. • Replaceable check disc rubber
For WattsBox Enclosures, request literature ES-WB.

J
C (open) I

D
H
A G P
757aDCDA, 757NaDCDA
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C D G H I J P 757aDCDA 757NaDCDA
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.
21⁄2 65 31 787 163⁄8 416 31⁄2 89 291⁄16 738 22 559 151⁄2 393 813⁄16 223 133⁄16 335 139 63 147 67
3 80 3111⁄16 805 187⁄8 479 311⁄16 94 301⁄4 768 223⁄4 578 171⁄8 435 93⁄16 233 141⁄2 368 159 72 172 78
4 100 3311⁄16 856 223⁄4 578 4 102 33 838 24 610 181⁄2 470 915⁄16 252 153⁄16 386 175 79 198 90
6 150 431⁄2 1105 301⁄8 765 51⁄2 140 443⁄4 1137 333⁄4 857 233⁄16 589 131⁄16 332 19 483 309 140 350 159
757aDCDA BFG, 757NaDCDA BFG
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C D G H I J P 757aDCDA BFG 757NaDCDA BFG

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.

21⁄2 65 28 711 8 203 31⁄2 89 297⁄8 759 22 559 1415⁄16 379 813⁄16 223 13 330 70 32 78 35
3 80 281⁄2 724 85⁄16 211 311⁄16 94 3011⁄16 779 223⁄4 578 157⁄16 392 93⁄16 233 131⁄2 343 68 31 81 37
4 100 293⁄16 741 815⁄16 227 311⁄16 94 3115⁄16 811 24 610 161⁄4 412 915⁄16 252 14 356 75 34 98 44
6 150 361⁄2 927 10 254 5 127 433⁄16 1097 333⁄4 857 1911⁄16 500 131⁄16 332 141⁄2 368 131 59 171 78

44 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 774DCDA (2 ⁄ " – 12") 12

Double Check Detector Assemblies

• Designed to prevent the reverse flow of polluted water from entering the potable
water system
• For non-health hazard continuous pressure applications
• Provides protection against backsiphonage and backpressure backflow
• Detects system leaks or unauthorized use of the water supply 774DCDA OSY

Specifications Features
• Temperature Range: 33°F – 110°F • Patented torsion spring check valve
provides low head loss

4
(0.5°C – 43°C) Models
• Maximum Working Pressure: 175psi add Suffix: • Short lay length is ideally suited for
(12.1 bar) retrofit installations
CFM – cubic feet per minute meter

Backflow Preventers & Accessories

• Stainless steel body is half the weight
GPM – gallons per minute meter
of competitive designs reducing instal-
LF – without shutoff valves
lation and shipping cost
OSY – UL/FM outside stem and yoke
resilient seated gate valves
• Stainless steel construction provides
long term corrosion protection and
*OSY FxG – flanged inlet gate connection
maximum strength
and grooved outlet gate connection
*OSY GxF – grooved inlet gate connection • Single top access cover with
and flanged outlet gate connection two-bolt grooved style coupling
*OSY GxG – grooved inlet gate connec-
for ease of maintenance
tion and grooved outlet gate connection • Thermoplastic and stainless steel
Available with grooved NRS gate valves check valves for trouble-free operation
- consult factory* • No special tools required for servicing
Post indicator plate and operating nut • Compact construction allows for
available – consult factory* smaller vaults and enclosures
* Consult factory for dimensions • Furnished with 5⁄8" x 3⁄4" bronze meter
(gpm or cfm)
• Detects underground leaks and
unauthorized water use
C
(Open) • May be installed in horizontal or
G vertical flow up position

D For additional information, request literature

ES-774DCDA.
L S For WattsBox Enclosures,
A P request literature ES-WB.

774DCDA
SIZE (DN) DIMENSIONS (APPROX.) WEIGHTS
A C (OSY) D G L P w/Gates w/o Gates
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lb. kgs. lb. kgs.

21⁄2 65 38 965 163⁄8 416 3 1 ⁄2 89 10 254 22 559 121⁄2 318 155 70 68 31

3 80 38 965 187⁄8 479 3 3 ⁄4 95 10 254 22 559 13 330 230 104 70 32
4 100 40 1016 223⁄4 578 4 1 ⁄2 114 10 254 22 559 141⁄2 368 240 109 73 33
6 150 481⁄2 1232 301⁄8 765 5 1 ⁄2 140 15 381 271⁄2 699 151⁄2 394 390 177 120 54
8 200 521⁄2 1334 373⁄4 959 6 3 ⁄4 171 15 381 291⁄2 749 181⁄4 464 572 259 180 82
10 250 551⁄2 1410 453⁄4 1162 8 200 15 381 291⁄2 749 191⁄2 495 774 351 190 86
12 300 571⁄2 1461 531⁄8 1349 91⁄2 241 15 381 291⁄2 749 21 533 1044 474 220 100

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 45
 Series 709DCDA (3" – 10")
Double Check Detector Assemblies
• Designed to prevent the reverse flow of polluted water from
entering the potable water system.
• For non-health hazard continuous pressure applications
• Provides protection against backsiphonage and backpressure backflow
• Detects system leaks or unauthorized use of the water supply 709DCDA OSY

Specifications
• Temperature Range: 33°F – 110°F (0.5°C – 43°C) Features
• Body construction fused epoxy coated
4

• Maximum Working Pressure: 175psi (12.1 bar)

cast iron
• Replaceable bronze seats
Models
Backflow Preventers & Accessories

add Suffix: • Maximum flow at low pressure drop

OSY – UL/FM outside stem & yoke resilient seated gate valves • Compact for economy combined
with performance
CFM – cubic feet per minute meter
• Design simplicity for easy maintenance
GPM – gallons per minute meter
• Furnished with 5⁄8" x 3⁄4" (16 x 19mm)
LF – without shutoff valves
meter Model 25, bronze
For additional information, request literature ES-709DCDA. • No special tools required for servicing
For WattsBox Enclosures, request literature ES-WB.

C
(Open)

D
L
A R T

709DCDA
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C D L R T
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.

3 80 40 1016 187⁄8 479 3 3 ⁄4 95 24 610 14 356 3 76 190 86

4 100 52 1321 223⁄4 578 4 1 ⁄2 114 34 864 15 381 6 152 403 183
6 150 631⁄4 1607 301⁄8 765 5 1 ⁄2 140 421⁄4 1073 16 406 71⁄2 191 727 330
8 200 75 1905 373⁄4 959 6 5 ⁄8 168 52 1321 17 432 9 229 1327 602
10 250 90 2286 453⁄4 1162 8 203 64 1626 18 457 101⁄4 260 2093 949

46 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 007DCDA (2" – 3")
Double Check Detector Assemblies
• Designed to prevent the reverse flow of polluted water from
entering the potable water system
• For non-health hazard continuous pressure applications
• Provides protection against backsiphonage and backpressure backflow 007DCDA
• Detects system leaks or unauthorized use of the water supply

Specifications
• Temperature Range: 33°F – 110°F (0.5°C – 43°C) continuous; 140°F (60°C) intermit- Features
tent • Fused epoxy coated cast iron unibody

4
• Maximum Working Pressure: 175psi (12.1 bar) (21⁄2" & 3")
• Replaceable bronze seats

Backflow Preventers & Accessories

Models • Maximum flow at low pressure drop
add Suffix: • Compact for ease of installation
OSY – UL/FM outside stem & yoke resilient seated gate valves • Design simplicity for easy maintenance
CFM – cubic feet per minute meter • No special tools required for servicing
GPM – gallons per minute meter • Bronze body ball valve test cocks
LF – without shutoff valves • Modular spring loaded checks
• Furnished with bronze 5⁄8" x 3⁄4"
For additional information, request literature ES-007DCDA.
For WattsBox Enclosures, request literature ES-WB. (16 x 19mm) meter

A
E

C
(open)
P P

E
A

007DCDA

SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A C (OSY) E P
in. mm in. mm in. mm in. mm in. mm lbs. kgs.

2 50 351⁄8 892 131⁄2 343 163⁄4 279 121⁄4 311 97 44

21⁄2 65 331⁄4 844 163⁄8 416 163⁄8 416 125⁄16 313 164 74
3 80 341⁄4 870 187⁄8 479 155⁄8 422 125⁄16 313 196 89

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 47
 SilverEagle™
Series 957, 957N,
957Z (2 ⁄ " – 10") 12
957OSY 957Z BFG 957QT
Reduced Pressure Zone Assemblies
Features
• Designed to provide protection to the potable water system • Sizes 21⁄2" – 3" (65 - 80mm) available
from contamination in accordance with national plumbing codes with quarter-turn ball valve shutoffs
• For health hazard continuous pressure applications • Extremely compact design
• Provides protection against backpressure and backsiphonage backflow • 70% Lighter than traditional designs
• 304 (Schedule 40) stainless steel
Specifications housing and sleeve
• Groove fittings allow integral pipeline
4

• Temperature Range: 33°F – 110°F (0.5°C – 43°C)

adjustment
• Maximum Working Pressure: 175psi (12.1 bar)
• Patented torsion spring checks provides
lowest pressure loss
Models add Suffix:
Backflow Preventers & Accessories

• Unmatched ease of serviceability

NRS – non-rising stem resilient seated gate valves
• Available with grooved butterfly
OSY – UL/FM outside stem and yoke resilient seated gate valves valve shutoffs
BFG – 21⁄2" - 6" (65 – 150mm) UL/FM grooved gear operated butterfly valves with • May be used for horizontal,
tamper switch N pattern or Z pattern installations
QT – 21⁄2" – 3" (65 – 80mm) quarter-turn ball valves • Bottom mounted cast stainless steel
relief valve
*OSY FxG – flanged inlet gate connection and grooved outlet gate connection
• Replaceable check disc rubber
*OSY GxF – grooved inlet gate connection and flanged outlet gate connection
For additional information, request literature
*OSY GxG – grooved inlet gate connection and grooved outlet gate connection ES-957/957N/957Z. For information on Air
Available with grooved NRS gate valves - consult factory* Gaps, Vent Elbows and Test Cocks see
page 58 or request literature ES-AG/EL/TC.
Post indicator plate and operating nut available – consult factory*
For Wattsbox Enclosures, request literature
* Consult factory for dimensions ES-WB.

C (open)
J
M I
D
H
A G P1
957 P
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C (OSY) C (NRS) D G H I J M P 957 957 957N 957N
(NRS) (OSY) (NRS) (OSY)
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs lbs. kgs. lbs. kgs. lbs. kgs.
12
2⁄ 65 31 787 16 ⁄ 38 416 9⁄38 238 6⁄ 12 165 1 16
29 ⁄ 738 22 559 12
15 ⁄ 393 8 ⁄13 16 223 9 16
21 ⁄ 548 93⁄16 234 118 54 128 58 126 57 136 62
3 80 3111⁄16 805 187⁄8 479 101⁄4 260 611⁄16 170 301⁄4 768 223⁄4 578 171⁄8 435 93⁄16 233 231⁄8 587 101⁄2 267 134 61 148 67 147 67 161 68
4 100 3311⁄16 856 223⁄4 578 123⁄16 310 7 178 33 838 24 610 181⁄2 470 915⁄16 252 261⁄2 673 113⁄16 284 164 74 164 74 187 85 187 85
6 150 431⁄2 1105 301⁄8 765 16 406 81⁄2 216 443⁄4 1137 333⁄4 857 233⁄16 589 131⁄16 333 323⁄4 832 15 381 276 125 298 135 317 144 339 154
8 200 50 1270 373⁄4 959 1915⁄16 506 911⁄16 246 541⁄8 1375 405⁄8 1032 277⁄16 697 1511⁄16 399 371⁄8 943 173⁄16 437 441 200 483 219 516 234 558 253
10 250 571⁄2 1460 453⁄4 1162 2313⁄16 605 113⁄16 285 66 1676 50 1270 321⁄2 826 175⁄16 440 463⁄8 1178 20 508 723 328 783 355 893 405 950 431
957 BFG
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
G H I J M P 957N BFG/957Z BFG
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
21⁄2 65 321⁄2 826 231⁄2 597 151⁄2 394 91⁄2 241 2113⁄16 555 1113⁄16 300 67 30
3 80 34 864 241⁄2 622 165⁄16 414 101⁄16 256 231⁄8 587 121⁄8 308 70 32
4 100 355⁄8 905 26 660 173⁄16 437 1015⁄16 279 2415⁄16 634 125⁄8 321 87 39
6 150 461⁄2 1181 3512⁄16 908 201⁄2 521 131⁄2 343 281⁄4 718 15 382 160 73
957QT
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C D G H I J M P P1 957QT
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
21⁄2 65 2815⁄16 735 47⁄8 124 67⁄8 174 301⁄4 768 241⁄2 622 169⁄16 421 113⁄8 289 2015⁄16 532 115⁄16 287 115⁄16 287 46 21
3 80 303⁄16 767 413⁄16 122 67⁄8 174 301⁄4 768 241⁄2 622 173⁄16 437 111⁄4 258 223⁄16 564 115⁄16 287 115⁄16 287 56 25

48 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 994 (21⁄2" – 10")
Reduced Pressure Zone Assemblies
• Designed to prevent the reverse flow of polluted water from
entering the potable water system
• For health hazard continuous pressure applications
• Provides protection against backsiphonage and backpressure backflow
994 OSY
Specifications Features
• Temperature Range: 33°F – 110°F (0.5°C – 43°C) continuous; 140°F (60°C) intermit- • Stainless steel construction provides
tent long term corrosion resistance and
• Maximum Working Pressure: 175psi (12.1 bar) maximum strength

4
• Stainless steel body is half the weight
of competitive designs reducing instal-
Models lation and shipping costs

Backflow Preventers & Accessories

add suffix:
• Short end to end dimensions makes
LF – without shutoff valves
retrofit easy
NRS – non-rising stem resilient seated gate valves
• Bottom mounted relief valve reduces
OSY – UL/FM outside stem & yoke resilient seated gate valve clearance requirements when installed
*OSY FxG – flanged inlet gate connection and grooved outlet gate connection against an outside wall
*OSY GxF – grooved inlet gate connection and flanged outlet gate connection • Patented torsion spring check
*OSY GxG – grooved inlet gate connection and grooved outlet gate connection valves provide maximum flow at low
S – cast iron strainer. pressure drop
Available with grooved NRS gate valves - consult factory* • Thermoplastic & stainless steel check
Post indicator plate and operating nut available – consult factory* valves for trouble-free operation
* Consult factory for dimensions • No special tools required for servicing
For additional information, request literature ES-994. • Compact construction allows for
For information on Air Gaps, Vent Elbows and Test Cocks, see page 58 or request smaller enclosures
literature ES-AG/EL/TC. • Stainless steel relief valve features
For WattsBox Enclosures, request literature ES-WB. a balanced rolling diaphragm to
eliminate sliding seals and lower
maintenance costs

C (open)
G

D
N

M A F
F
994
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C (NRS) C (OSY) D F G L M N w/Gates w/o Gates
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.

21⁄2 65 37 940 93⁄8 238 163⁄8 416 101⁄2 267 7 178 10 254 22 559 10 254 61⁄2 165 148 67 60 27
3 80 38 965 101⁄4 260 187⁄8 479 101⁄2 267 71⁄2 191 10 254 22 559 101⁄8 257 7 178 226 103 62 28
4 100 40 1016 123⁄16 310 223⁄4 578 101⁄2 267 9 229 10 254 22 559 121⁄8 308 81⁄4 210 235 107 65 30
6 150 481⁄2 1232 16 406 301⁄8 765 111⁄2 292 11 279 15 381 271⁄2 699 181⁄2 470 131⁄2 343 380 172 110 50
8 200 521⁄2 1334 1915⁄16 506 373⁄4 959 121⁄2 318 131⁄2 343 15 381 291⁄2 749 215⁄8 549 151⁄2 394 571 259 179 81
10 250 551⁄2 1410 2313⁄16 605 453⁄4 1162 121⁄2 318 16 406 15 381 291⁄2 749 26 660 181⁄2 470 773 351 189 86

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 49
 Series 994 BLT (2 ⁄ " FNPT x 3" MNPT) 12

Series 994 HMB (2 ⁄ "-7NST x 3") 12

Hydrant Meter Backflow Preventers

• Designed to retrofit backflow protection of potable water from fire hydrants or other
non-permanent, temporary water service connections where flow is in one direction
only and the possibility of cross-connection exists 994HMB
• Large flow capacity-rated at over 500gpm with less than 14psi (96.5 kPa) loss per
ASSE, USC and AWWA standards for Reduced Pressure Principle devices
• Meets AWWA C701 meter requirements (Series HMB)
• Ideal for use with existing hydrant meter hookups (Series BLT)
4

Specifications
• Typical Operating Range: (100% +/- 1.5%) 5 to 660gpm
Backflow Preventers & Accessories

• Maximum Continuous Flow: 450gpm (1710 lpm)

• Maximum Intermittent Flow: 660gpm (2510 lpm)
994BLT
• Typical Low Flow (Min 95%): 4gpm (15 lpm)
• Pressure Loss at Max. Flow: 37psi @ 450gpm (255 kPa @ 1710 lpm)
• Continuous Operation: 23psi @ 350gpm (159 kPa @ 1330 lpm)
Features
• Heavy duty relief valve cover prevents
vandalism and protects valve from
Options (BLT Series) damage when 994HMB is transported
Inlet Modules to another fire hydrant location
• 3" (80mm) female or male hydrant thread • In-line flow restrictor protects the
• 21⁄2" (65mm) female or male hydrant thread meter measuring element and the
• 21⁄2" (65mm) male NPT thread backflow preventer components from
damage due to excessive flow
• Customer specified
(994HMB only)
Outlet Modules
• Backflow preventer made from
• 3" (80mm) gate w/female or male hose thread 300 Series stainless steel for
• 21⁄2" (65mm) gate w/ female or male hose thread corrosion resistance
• 3" (80mm) gate valve only, w/3" (80mm) INPT thread • Portable, lightweight design makes
• 21⁄2" (65mm) gate valve only, w/21⁄2" (65mm) FNPT device easily transportable between
• Customer specified job sites
Foot Modules • Accurately measures flow (HMB
series) and protects the water supply
• Uneven surface saddle (supplied standard with unit)
from possible contamination
• Flat surface adapter
• Built-in support leg is adjustable in the
• Customer specified field, no matter the installation
For additional information on the HMB, request literature S-994HMB; on the BLT, • Factory assembled and tested; no
request literature ES-994BLT. field assembly required; eliminates
leaks, fouls, and improper assembly

81⁄4"

MODEL WEIGHT 93⁄16"

lbs. kgs.

994BLT 62 28
994HMB-GPM 66 30
201⁄8"
994HMB-CFM 66 30
371⁄2"

50 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 909 (3⁄4" – 2")
Reduced Pressure Zone Assemblies
• Designed to prevent the reverse flow of polluted water from
entering the potable water system
• For health hazard continuous pressure applications
• Unique patented “air-in/water-out” design provides high capacity relief valve discharge 909QT
performance during emergency conditions of backsiphonage and backpressure with
both checks fouled

Features
Specifications • Modular design
• Temperature Range: 33°F – 140°F (0.5°C – 60°C) continuous;
• Replaceable bronze seats

4
180°F (82°C) intermittent
• Compact for installation ease
• Maximum Working Pressure: 175psi (12.1 bar)
• Horizontal or vertical (up or down)

Backflow Preventers & Accessories

installation
Models • No special tools required for servicing
add Suffix:
QT – quarter-turn ball valves
S – bronze strainer
HW – stainless steel check modules for hot and harsh water conditions
LF – without shutoff valves
LH – locking handle ball valves (open position)
HC – inlet/outlet fire hydrant fitting (2" (50mm) only)
PC – polymer coating
Prefix
C – clean and check strainer - 3⁄4" and 1" only (20 and 25mm)
U – union connections - 3⁄4" and 1" only (20 and 25mm)
FAE – flanged adapter ends - 11⁄4", 11⁄2", 2" only (32, 40, 50mm)

For additional information, request literature ES-909S.

For information on Air Gaps, Vent Elbows and Test Cocks
see page 58 or request literature ES-AG/EL/TC.
For WattsBox Enclosures, request literature ES-WB.
A
L

B
N
D

P
M E

909
SIZE (DN) DIMENSIONS (APPROX.) STRAINER DIMENSIONS WEIGHT
A B C D E L P M N
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
34
⁄ 20 38
14 ⁄ 365 34
8⁄ 222 4 102 34
4⁄ 121 34
6⁄ 171 5 16
7⁄ 186 78
3⁄ 98 3⁄3 16 81 2⁄34 70 14 6
1 25 153⁄8 391 83⁄4 222 4 102 43⁄4 121 7 178 75⁄16 186 37⁄8 98 33⁄4 95 3 76 15 7
11⁄4 32 181⁄2 470 115⁄8 295 51⁄2 140 61⁄2 165 71⁄2 191 103⁄8 264 51⁄4 133 47⁄16 113 3 1 ⁄2 89 40 18
11⁄2 40 19 483 115⁄8 295 51⁄2 140 61⁄2 165 71⁄2 191 103⁄8 264 51⁄4 133 47⁄8 124 4 102 40 18
2 50 191⁄2 495 115⁄8 295 51⁄2 140 61⁄2 165 73⁄4 197 103⁄8 264 51⁄4 133 515⁄16 151 5 127 40 18

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 51
 Series 909 (21⁄2" – 10")
Reduced Pressure Zone Assemblies
• Designed to prevent the reverse flow of polluted water from
entering the potable water system
• For health hazard continuous pressure applications
909OSY
• Unique patented “air-in/water-out” design provides high capacity relief valve discharge
performance during emergency conditions of backsiphonage and backpressure with Models
both checks fouled add Suffix:
BB – Bronze body, sizes 21⁄2" & 3"
Specifications (65 and 80mm)
• Temperature Range: 33°F – 110°F (0.5°C – 43°C) continuous; LF – without shutoff valves
4

140°F (60°C) intermittent NRS – non-rising stem resilient seated

• Maximum Working Pressure: 175psi (12.1 bar) gate valves
OSY – UL/FM outside stem and yoke
Backflow Preventers & Accessories

For additional information, request literature ES-909L. resilient seated gate valves
For information on Air Gaps, Vent Elbows and Test Cocks see page 58 or request QT – quarter-turn ball valve
literature ES-AG/EL/TC. QT-FDA – FDA epoxy coated quarter-turn
For WattsBox Enclosures, request literature ES-WB. ball valve shutoffs
S – cast iron strainer
S-FDA – FDA epoxy coated strainer

Features
• Replaceable bronze seats
A1 • Stainless steel internal parts
C • No special tools required for servicing
(Open)
M* U • Captured spring check assemblies
• Fused epoxy coated & lined checks
N1* N* D • Industrial strength sensing hose
L • Field reversible relief valve
A • Air-in/water-out relief valve design
provides maximum capacity during
Strainer Dimensions
emergency conditions
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
M N1† N
in. mm in. mm in. mm in. mm lbs. kgs.

21⁄2 65 10 254 10 254 61⁄2 165 28 12.7

3 80 101⁄8 257 10 254 7 178 34 15.4
4 100 121⁄8 308 12 305 81⁄4 210 60 27
6 150 181⁄2 470 20 508 131⁄2 343 133 60 OUTLET
8 200 215⁄8 549 223⁄4 578 151⁄2 394 247 112
10 250 26 660 28 711 181⁄2 470 370 168
† – Dimension required for screen removal T
R
909
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

C clearance
for check
A A1 (OSY)* (NRS) D L U R R (QT) T NRS OSY QT
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. lbs. kgs.
12
2⁄ 65 41 ⁄ 14 1048 20 ⁄ 58 524 38
16 ⁄ 416 38
9⁄ 238 14
5⁄ 133 26 ⁄ 18 663 11 279 4 102 16 406 1 16
9⁄ 230 195 88.4 198 89.8 182 82.6
3 80 421⁄4 1073 211⁄4 540 187⁄8 479 101⁄4 260 51⁄4 133 261⁄8 663 11 279 5 127 16 406 91⁄16 230 225 102 230 104 190 86
4 100 551⁄8 1400 275⁄8 702 223⁄4 578 123⁄16 310 6 152 37 940 14 356 6 152 193⁄4 502 143⁄8 365 455 206 470 213 352 160
6 150 651⁄2 1664 323⁄4 832 301⁄8 765 16 406 6 152 441⁄2 1130 16 406 11 279 26 660 143⁄8 365 718 326 798 362 762 346
8 200 781⁄2 2000 393⁄8 1000 373⁄4 959 1915⁄16 506 93⁄4 248 551⁄4 1403 21 533 111⁄4 286 111⁄4 286 191⁄4 489 1350 612 1456 660 2286 1037
10 250 935⁄8 2378 467⁄8 1190 453⁄4 1162 2313⁄16 605 93⁄4 248 673⁄8 1711 21 533 121⁄2 318 121⁄2 318 21 533 2160 980 2230 1011 3716 1685
*UL, FM approved backflow preventers must include UL/FM approved OSY gate valves.

52 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 009 (1⁄4" – 3")
Reduced Pressure Zone Assemblies
• Designed to prevent the reverse flow of polluted water from
entering the potable water system
009QT
• For health hazard continuous pressure applications
• Provides protection against backsiphonage and backpressure backflow
Features
• Single access cover and modular check
Specifications construction for ease of maintenance
• Temperature Range: 1⁄4" – 2" 33°F – 180°F (0.5°C – 82°C); 21⁄2" – 3" 33°F – 110°F • Top entry - all internals immediately
(0.5°C – 43°C) continuous, 140°F (60°C) accessible
• Maximum Working Pressure: 175psi (12.1 bar) • Captured springs for safe maintenance

4
• Internal relief valve for reduced
For additional information, request literature ES-009. installation clearances
For information on Air Gaps, Vent Elbows and Test Cocks see page 58 or request • Replaceable seats for economical repair

Backflow Preventers & Accessories

literature ES-AG/EL/TC. • Bronze body construction for durability
1⁄4" – 2" (8 – 50mm)
For WattsBox Enclosures, request literature ES-WB.
• Fused epoxy coated cast iron body -
21⁄2" and 3" (65 and 80mm)
C • Ball valve test cocks - screwdriver
B slotted - 1⁄4" – 2" (8 – 50mm)
• Large body passages provide low
N D
pressure drop
L • Compact, space saving design
• No special tools required for servicing
M A

009 1⁄4" – 2"

SIZE (DN) DIMENSIONS (APPROX.) STRAINER DIMENSIONS WEIGHT
A B C D L M N
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
14⁄ 8 10 254 45⁄8 117 33 ⁄ 8 86 11⁄4 32 51⁄2 140 23⁄8 60 21⁄2 64 5 2
3⁄8 10 10 254 45⁄8 117 33 ⁄ 8 86 11⁄4 32 51⁄2 140 23⁄8 60 21⁄2 64 5 2
1⁄2 15 10 254 45⁄8 117 33 ⁄ 8 86 11⁄4 32 51⁄2 140 23⁄4 70 21⁄4 57 5 2
3⁄4 20 103⁄4 273 5 127 3 1 ⁄2 89 11⁄2 38 63⁄4 171 33⁄16 81 23⁄4 70 6 3
1 25 163⁄4 425 51⁄2 140 3 76 21⁄2 64 91⁄2 241 33⁄4 95 3 76 12 5
11⁄4 32 173⁄8 441 6 150 3 1 ⁄2 89 21⁄2 64 113⁄8 289 47⁄16 113 31⁄2 89 15 6
11⁄2 40 177⁄8 454 6 150 3 1 ⁄2 89 21⁄2 64 111⁄8 283 47⁄8 124 4 102 16 7
2 50 213⁄8 543 73⁄4 197 41 ⁄ 2 114 31⁄4 83 131⁄2 343 515⁄16 151 5 127 30 13

U C (Open)

N D
R
L
E
12
009 2 ⁄ " and 3" M A
MODEL NO. SIZE (DN) DIMENSIONS (APPROX.) STRAINER DIMENSIONS WEIGHT
A C D E L R U M N
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.

009LF 12
2⁄ 65 — — — — 14
5⁄ 133 — — 18
18 ⁄ 460 –– –– 10 ⁄ 58 270 10 254 6⁄ 12 165 76 34
009OSY 21⁄2 65 331⁄4 845 163⁄8 416 51⁄4 133 163⁄8 416 181⁄8 460 73 ⁄4 197 105⁄8 270 10 254 61⁄2 165 166 75
009NRS 21⁄2 65 331⁄4 845 93⁄8 238 51⁄4 133 163⁄8 416 181⁄8 460 73 ⁄4 197 105⁄8 270 10 254 61⁄2 165 189 86
009QT 21⁄2 65 331⁄4 845 6 152 51⁄4 133 163⁄8 416 181⁄8 460 73 ⁄4 197 105⁄8 270 10 254 61⁄2 165 150 68
009LF 3 80 — — — — 51⁄4 133 — — 181⁄8 460 — — 105⁄8 270 101⁄8 257 7 178 76 34
009OSY 3 80 341⁄4 870 187⁄8 470 51⁄4 133 165⁄8 422 181⁄8 460 83 ⁄4 222 105⁄8 270 101⁄8 257 7 178 198 90
009NRS 3 80 341⁄4 870 101⁄4 260 51⁄4 133 165⁄8 422 181⁄8 460 83 ⁄4 222 105⁄8 270 101⁄8 257 7 178 191 87
009QT 3 80 341⁄4 870 7 178 51⁄4 133 165⁄8 422 181⁄8 460 83 ⁄4 222 105⁄8 270 101⁄8 257 7 178 158 71

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 53
 GoldenEagle®
Series 919 ( ⁄ " – 2") 34

Reduced Pressure Zone Assemblies

• Designed to prevent the reverse flow of polluted water from
entering the potable water system 919QT
• For health hazard continuous pressure applications
• Provides protection against backsiphonage and backpressure backflow Features
• Separate access covers for the check
valves and relief valve for ease of
Specifications maintenance
• Temperature Range: 33°F – 180°F (0.5°C – 82°C) • Top entry-all check internals easily
4

• Maximum Working Pressure: 175psi (12.1 bar) accessible

• All rubber elastomers of chloramine
resistant material
Backflow Preventers & Accessories

Models 3⁄4" – 2" (20 – 50mm) • Check valve poppet assemblies are fully
add Suffix: guided by innovative plastic seat guide
QT – quarter-turn ball valves • Replaceable push-in check valve and
S – bronze strainer relief valve seats eliminates threads from
the water way
LF – without shutoff valves
• EZ twist relief valve cover quarter-turn
AQT – elbow fitting for 360º rotation locking joint captures the spring load
ZQT – inlet & outlet flow up during repair to facilitate disassembly
add Prefix: • Innovative check valve plastic cover
U – union connections bushing provides trouble free guiding of
the check valve poppet
For additional information, request literature ES-919. • Bottom mounted relief valve provides
reduced installation clearances
For information on Air Gaps, Vent Elbows and Test Cocks see page 58 or request
literature ES-AG/EL/TC. • Compact, space saving design
For WattsBox Enclosures, request literature ES-WB. • No special tools required for servicing
• Top mounted test cocks for ease in test-
ing and reduced installation clearances
• Standardly furnished with NPT body
connections

N
C

B
M

E G H
F
919QT, 919QT-S
SIZE (DN) DIMENSIONS (APPROX.) STRAINER DIMENSIONS WEIGHT
A B C D E (LF) F G H M N 919QT 919QT-S
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.
34
⁄ 20 121⁄8 307 77⁄16 188 31⁄2 88 151⁄2 393 711/16 195 35/8 92 21/16 52 19⁄16 40 15/8 41 33/16 81 8.3 3.7 10.0 4.5
1 25 141⁄2 368 8 202 37⁄8 98 193⁄16 487 93⁄16 233 4 102 27⁄16 62 19⁄16 40 21⁄8 54 33⁄4 95 11.8 5.4 13.8 6.3
11⁄4 32 181⁄8 461 117/16 290 51⁄8 129 231⁄4 591 1111⁄16 297 51⁄8 130 25⁄8 67 21⁄2 64 21⁄2 64 47⁄16 113 22.3 10.1 26.3 11.9
11⁄2 40 183⁄4 476 117/16 290 51⁄8 129 251⁄16 637 1111⁄16 297 55⁄8 143 31⁄8 79 21⁄2 64 3 76 47⁄8 124 28.3 12.8 32.0 14.5
2 50 211⁄16 535 121⁄16 307 55⁄8 142 2813⁄16 732 133⁄8 340 515⁄16 151 37⁄16 87 21⁄2 64 39⁄16 90 515⁄ 151 37.3 16.9 45.0 20.4

54 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
SilverEagle™
Series 957RPDA, 957NRPDA,
957ZRPDA (2 ⁄ " – 10") 12

Reduced Pressure Detector Assemblies

• Designed to provide protection to the potable water system from contamination in
accordance with national plumbing codes
957NRPDA OSY
• For health hazard continuous pressure applications Features
• Provides protection against backsiphonage and backpressure backflow • Extremely compact design
• Primarily installed on fire sprinkler systems when it is necessary to monitor • 70% Lighter than traditional designs
unauthorized use of water
• 304 (Schedule 40) stainless steel hous-

4
ing and sleeve
Specifications
• Groove fittings allow integral pipeline
• Temperature Range: 33°F – 110°F (0.5°C – 43°C) adjustment

Backflow Preventers & Accessories

• Maximum Working Pressure: 175psi (12.1 bar) • Patented torsion spring checks provides
lowest pressure loss
Models • Unmatched ease of serviceability
add Suffix: • Available with grooved butterfly
OSY – UL/FM outside stem and yoke resilient seated gate valves valve shutoffs.
BFG – 21⁄2" – 6" N or Z pattern only with UL/FM grooved gear operated butterfly valves • Bottom mounted cast stainless steel
with tamper switch relief valve
CFM – cubic feet per minute meter • Replaceable check disc rubber
GPM – gallons per minute meter • Metered bypass to detect leakage
or theft of water from the fire
For additional information, request literature ES-957RPDA/957NRPDA/957ZRPDA.
sprinkler system
For information on Air Gaps, Vent Elbows and Test Cocks see page 58 or request literature
ES-AG/EL/TC.
For WattsBox Enclosures, request literature ES-WB.

C (open) J
I
M
D
H

A P G P1

957RPDA OSY
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C D G H I J M P 957RPDA OSY 957NRPDA OSY
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.
12
2⁄ 65 31 787 16 ⁄ 416 6 ⁄ 38 12 165 1 16
29 ⁄ 738 22 559 15 ⁄ 12 393 13 16
8 ⁄ 223 9 16
21 ⁄ 548 13 ⁄ 3 16 335 142 64 150 68
3 80 3111⁄16 805 187⁄8 479 611⁄16 170 301⁄4 768 223⁄4 578 171⁄8 435 93⁄16 233 231⁄8 587 141⁄2 368 162 73 175 79
4 100 3311⁄16 856 223⁄4 578 7 178 33 838 24 610 181⁄2 470 915⁄16 252 261⁄2 673 153⁄16 386 178 81 201 91
6 150 431⁄2 1105 301⁄8 765 81⁄2 216 443⁄4 1137 333⁄4 857 233⁄16 589 131⁄16 332 323⁄4 832 19 483 312 142 353 160
8 200 50 1270 373⁄4 959 911⁄16 246 541⁄8 1375 405⁄8 1032 277⁄16 697 1511⁄16 399 371⁄8 943 213⁄16 538 497 225 572 259
10 250 571⁄2 1460 453⁄4 1162 113⁄16 285 66 1676 50 1270 321⁄2 826 175⁄16 440 463⁄8 1178 24 610 797 362 964 437
957RPDA BFG
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
G H I J M P1 957RPDA BFG
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
12
2⁄ 65 32 ⁄ 12 826 12
23 ⁄ 597 15 ⁄ 12 394 12
9⁄ 241 21 ⁄ 13 16 555 15 ⁄13 16 402 81 37
3 80 34 864 241⁄2 622 165⁄16 414 101⁄16 256 231⁄8 587 161⁄8 410 84 38
4 100 355⁄8 905 26 660 173⁄16 437 1015⁄16 279 2415⁄16 634 165⁄8 422 101 46
6 150 461⁄2 1181 3512⁄16 908 201⁄2 521 131⁄2 343 281⁄4 718 19 483 174 79

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 55
 Series 994RPDA (21⁄2" – 6")
Reduced Pressure Detector Assemblies
• Designed to prevent the reverse flow of polluted water from
entering the potable water system
• For health hazard continuous pressure applications
• Provides protection against backsiphonage and backpressure backflow
• Detects system leaks or unauthorized use of water supply 994RPDA OSY

Specifications Features
• Temperature Range: 33°F – 110°F (0.5°C – 43°C) • Stainless steel construction provides
• Maximum Working Pressure: 175psi (12.1 bar) long term corrosion resistance and
4

maximum strength
Models • Stainless steel body is half the weight
Backflow Preventers & Accessories

of competitive designs reducing

add Suffix:
installation and shipping costs
LF – without shutoff valves
• Short end-to-end dimensions makes
OSY – UL/FM outside stem & yoke resilient seated gate valves retrofit easy
CFM – cubic feet per minute meter • Bottom mounted relief valve reduces
GPM – gallons per minute meter clearance requirements when installed
*OSY FxG – flanged inlet gate connection and grooved outlet gate connection against an outside wall
*OSY GxF – grooved inlet gate connection and flanged outlet gate connection • Patented torsion spring check valves
*OSY GxG – grooved inlet gate connection and grooved outlet gate connection provide maximum flow at low
Available with grooved NRS gate valves - consult factory* pressure drop
Post indicator plate and operating nut available – consult factory* • Thermoplastic and stainless steel
* Consult factory for dimensions check valves for trouble-free operation
• No special tools required for servicing
For additional information, request literature ES-994RPDA
• Compact construction allows for
For information on Air Gaps, Vent Elbows and Test Cocks, see page 58 or request
literature ES-AG/EL/TC. smaller enclosures
For WattsBox Enclosures, request literature ES-WB. • Stainless steel relief valve features a
balanced rolling diaphragm to
eliminate sliding seals and lower
maintenance costs
• Detects underground leaks and
unauthorized water use
• GPM or CFM meter available

C (open)
G

L F
A

994RPDA
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C (open) D F G L w/Gates w/o Gates
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.

21⁄2 65 37 940 163⁄8 416 101⁄2 267 7 178 10 254 22 559 148 67 60 27
3 80 38 965 187⁄8 479 101⁄2 267 71⁄2 191 10 254 22 559 226 103 62 28
4 100 40 1016 223⁄4 578 101⁄2 267 9 229 10 254 22 559 235 107 65 30
6 150 481⁄2 1232 301⁄8 765 111⁄2 292 11 279 15 381 271⁄2 699 380 172 110 50

56 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 909RPDA (21⁄2" – 10")
Reduced Pressure Detector Assemblies
• Designed to prevent the reverse flow of polluted water from
entering the potable water system
• For health hazard continuous pressure applications
• Provides protection against backsiphonage and backpressure backflow 909RPDAOSY
• Detects system leaks or unauthorized use of water supply

Specifications Features
• Temperature Range: 33°F – 140°F (0.5°C – 60°C) • Body construction fused epoxy coated
• Maximum Working Pressure: 175psi (12.1 bar) cast iron

4
• Replaceable bronze seats
Models • Maximum flow at low pressure drop

Backflow Preventers & Accessories

add Suffix: • Compact for economy combined with
OSY – UL/FM outside stem & yoke resilient seated gate valves performance
LF – without shutoff valves (4" – 10") (100 – 250mm) • Design simplicity for easy maintenance
CFM – cubic feet per minute meter • Furnished with 5⁄8" x 3⁄4" (16 x 19mm)
GPM – gallons per minute meter recordall meter
• Air-in/water-out relief valve design
For additional information, request literature ES-909RPDA. provides maximum capacity during
For information on Air Gaps, Vent Elbows and Test Cocks, see page 58 or request emergency conditions
literature ES-AG/EL/TC.
• No special tools required for servicing
For WattsBox Enclosures, request literature ES-WB.

G C (Open)

L
R T
A

909RPDA
SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C (OSY) D G L R T
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.

21⁄2 65 421⁄8 1070 163⁄8 416 51⁄4 133 7 178 261⁄8 664 14 356 9 229 230 104
3 80 421⁄8 1070 187⁄8 479 51⁄4 133 7 178 261⁄8 664 14 356 9 229 230 104
4 100 551⁄8 1400 223⁄4 578 6 152 91⁄2 241 37 940 15 381 135⁄8 346 470 213
6 150 651⁄2 1664 301⁄8 765 6 152 141⁄2 368 441⁄2 1130 16 406 135⁄8 346 798 362
8 200 781⁄2 1988 373⁄4 959 93⁄4 248 181⁄2 470 551⁄4 1403 17 432 181⁄2 470 1456 660
10 250 935⁄8 2378 453⁄4 1162 93⁄4 248 211⁄2 546 671⁄2 1715 18 457 181⁄2 470 2230 1012

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 57
 Splash Guard

Air Gaps and Elbows

for Reduced Pressure Zone Assemblies
Air Gaps for use with backflow preventers on horizontal
installations. Can be easily mounted to body
Vent Elbows are used with Watts air gaps for vertical installation
of reduced pressure zone backflow preventers
Air Gaps
For additional information, request literature ES-AG/EL/TC.

*Epoxy coated
Air Gaps
MODEL SERIES/SIZES DIMENSIONS (APPROX.) WEIGHT
Elbow
A B C
4

in. mm in. mm in. mm lbs. kgs.

909AG-A 14
⁄ " – 1⁄2" 009, 3⁄4" 009M2/M3 23⁄8 60 31⁄8 79 12
⁄ 13 .63 .28 A
12
⁄ "- 1"995
Backflow Preventers & Accessories

909AG-C 34
⁄ " -1" 009/909 14
3⁄ 83 78
4⁄ 124 1 25 1.50 .68
1- 11⁄2" 009M2, 11⁄4" – 2" 995
A
909AG-F 11⁄4" – 3" 009/909 43⁄8 111 63⁄4 171 2 51 3.25 1.47
11⁄4" – 2" 009M1, 2" 009M2 B
909AG-K 4" – 6" 909 63⁄8 162 95⁄8 244 3 76 6.25 2.83
B
8" – 10" 909M1
909AG-M 8" - 10" 909 73⁄8 187 111⁄4 286 4 102 15.50 7.03
3⁄4" & 1" 919 23⁄8 31⁄8 1⁄2
919AGC 60 79 13 .63 .28 C
919AGF 11⁄4" – 2" 919 43⁄8 111 87⁄8 214 3 76 4.26 1.93
957AG 21⁄2" - 10" 957 71⁄2 190 103⁄16 258 2 51 1.5 .68
957AG (Splash Guard) 21⁄2" – 10" 957 – – – – – – – – 909 Vertical (Up)
34
⁄ " – 1"
994AGK-P 21⁄2" – 10" 994 8 203 111⁄4 286 2 51 1.50 0.68 Installation of
(20 - 25mm) Backflow
995AG 3" – 6" 995 5 127 8 203 23⁄8 60 – –
Preventer
Vent Elbows — Use with Watts Air Gaps for vertical installation of reduced pressure zone assemblies.
909EL-A 1⁄4" – 1⁄2" 009, 3⁄4" 009M2/M3, – – – – – – – –
1⁄2"- 1" 995

* 909EL-C 3⁄4" – 1" 009/909, 23⁄8 60 23⁄8 60 – – .38 .17

1" – 11⁄2" 009M2,
11⁄4"- 2"995
* 909EL-F 11⁄4" – 2" 009M1, 35⁄8 92 35⁄8 92 – – 2 .91
11⁄4" – 2" 009/909
2" 009M2
* 909EL-H 21⁄2" – 3" 009/909 – – – – 2 51 – –
994EL-F (vertical) 21⁄2" – 10" 994 47⁄8 124 9 229 2 51 4 1.8

Test Cocks
For Use With Backflow Preventers, Isolation Valve for Gauges,
Isolation Valves for Small Equipment Lines

TC
SAE-TC Adapter SilverEagle TC
• Full port ball valve design
• Screwdriver slot to open and close • 1⁄4" female SAE x 7⁄16" FPT • 1⁄2" TC for 21⁄2" – 4" series 757 and 957
• Available 1⁄8" M x 1⁄4" F or 1⁄4" M x 1⁄4" F • Adapts to SAE-TC for use • 3⁄4" TC for 6" – 10" series 757 and 957
SAE-TC with pressure gauge and/or site tube • Full port ball valve design
SAE-TC Brass Cap No. 3 TC with O-Ring
• Full port ball valve design
• Screwdriver slot operation for protection of 1⁄8 SAE-TC (not shown) • for 21⁄2" – 4" series 757 and 957
• 1⁄8" M x SAE (four required per backflow preventer) • for 6" – 10" series 757 and 957

Caps & Tethers (Plastic, Brass)

Plastic cap and tether (four required per backflow preventer)
• Fits 1⁄4" female test cocks
• Plastic dust cap and rubber tether
• RK-TC 1⁄8 Plastic Cap and Tether
SAE Brass cap, O-ring and tether
• Fits 1⁄8" M x SAE test cocks
• Brass dust cap with O-ring seal and
rubber tether
• RK-SAE-TC Brass Cap and Tether

58 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 9 (1⁄4" – 3⁄8")
Dual Check Vacuum Breakers
• Used to prevent the flow of contaminated water into the potable water supply
• Use where water spillage will not cause damage
9D
Models
N9C – Dual check backflow preventer with atmospheric vent. For continuous
pressure applications. Sizes 1⁄4" (8mm) and 3⁄8" (10mm) NPT female inlet and outlet
connections. Max. pressure 125psi (8.6 bar).
N9 – the same as N9C except in brass finish.
NLF9 – Has a 3⁄8" (10mm) NPT male inlet connection. Max. pressure 150psi (10.3 bar).

4
For non-continuous pressure applications.
N9-CD – In-line field testable, dual check backflow preventer with atmospheric vent.
Non-removable design. Size 3⁄4" (20mm) hose thread female inlet x 3⁄4" (20mm) HT male

Backflow Preventers & Accessories

outlet connection. Max. pressure 150psi (10.3 bar). Max. temperature 180°F (82°C).
9D – Dual check backflow preventer with atmospheric vent for continuous
pressure. Sizes 1⁄2" (15mm) and 3⁄4" (20mm) NPT female union inlet and outlet connec-
tions. Max. pressure 175psi (12.1 bar). Min. pressure required 25psi (172.4 kPa). Max. N9-CD
temperature 250°F (121°C).
9DS – same as Model 9D with solder ends.
9BD – Special backflow preventer for vending machine water supply lines. Complies with
FDA food additive regulations. Standard size: 3⁄8" (10mm) flare copper tube (FCT) inlet and
outlet. Max. pressure 150psi (10.3 bar). Max. temperature 140°F (60°C).

For additional information, request literature ES-9, ES-N9-CD, or ES-9D-M3,M2.

Series 912HP (3⁄4", 1")

High Pressure Hose Drop Backflow Preventer
• For isolation protection on high pressure plumbing supply lines, such as high 912HP
pressure hose drops which are used for the washdown of equipment and facilities Patent# 6,397,878B1

• Ideally suited for food processing plants

• Provides and backpressure backflow protection to prevent the reverse flow of Features
potentially contaminated water from the processing and rendering areas into the • Female national pipe thread inlet
potable water supply and male national pipe thread
• Maximum Working Pressure: 400psi (27.6 bar) outlet connections
• Maximum Temperature: 160°F (71°C) • Ball valve design includes
reinforced/enhanced PTFE seats and
electroless nickel plated brass ball
Specifications
For non-health hazard applications where continuous pressure conditions exist. • Blow-out proof pressure retaining stem
Incorporates the use of a bronze ball valve shutoff on the inlet of the assembly and a dual • Low profile oval handle
check with atmospheric vent specifically designed to handle the temperature and pressure • In the event of fouling of the down-
conditions commonly found in the meat processing industry. stream check valve, leakage would be
For dimensional and additional information, request literature ES-912HP. vented to atmosphere thereby provid-
ing a visual indication of failure of the
check assembly
• Can be installed vertically (flow up or
flow down) or horizontally
• Integral stainless steel screen protects
the check assembly from fouling due
to dirt and debris

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 59
 Series 008PCQT (3⁄8" – 1")
Spill Resistant, Anti-siphon Vacuum Breakers
• Health hazard backflow preventer for continuous pressure applications.
• Designed for indoor point of use applications.
• Prevents backsiphonage of contaminated water into the potable water supply.
• Install 6" above the flood rim if field applied. Install 1" when factory installed or
deck/machine mounted. 008PCQT
• Standardly furnished with internal polymer coating.

Specifications Models
38
• Sizes ⁄ " – 1" (10 – 25mm). NPT female connections add Suffix:
• Temperature Range: 33°F – 180°F (0.5°C – 83°C) SC – satin chrome finish — with stem.
4

• Maximum Working Pressure: 150psi (10.3 bar) wrench flats in place of Tee handles
(contact factory)
For additional information, request literature ES-008PCQT. S – bronze strainer
Backflow Preventers & Accessories

L – left sided test cock

MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT A

A B C D
in. mm in. mm in. mm in. mm in. mm lbs. kgs.
C
008PCQT 38
⁄ 10 41⁄8 107 51⁄2 140 19⁄16 40 315⁄16 100 1.6 .7
008PCQT 1⁄2 15 43⁄8 111 51⁄2 140 19⁄16 40 43⁄16 106 1.7 .5
008PCQT 3⁄4 20 45⁄16 125 7 178 23⁄8 60 45⁄8 117 3.8 1.7 B
008PCQT 1 25 5 127 71⁄2 191 23⁄8 60 51⁄8 130 4.8 2.2
D
Note: A strainer is recommended to be installed ahead of the backflow preventer to prevent
the fouling of the check assembly and resultant spillage from the valve during re-pressuriza-
tion. Do not install in concealed locations or areas where water leakage due to normal wear
of the internal parts can cause damage.

Series 800M4QT, 800M4FR (1⁄2" – 2")

Pressure Vacuum Breakers
• With tee handle quarter-turn shutoffs on Specifications
sizes 1⁄2" – 1" (15 – 25mm) • Temperature Range: 33°F – 140°F
• Lever handles 11⁄4" – 2" (32 – 50mm) (0.5°C – 60°C)
• For health hazard cross-connections • Maximum Working Pressure: 150psi 800M4QT
subject to continuous pressure (10.3 bar)
• Install 12" (305mm) above highest
Models
downstream point of water For additional information, request literature 800M4FR – Model 800M4QT with relief
ES-800M4QT or ES-800M4FR. valve for freeze protection. Patent
• Designed to prevent backsiphonage of
For WattsBox Enclosures, #5551473. Sizes 1⁄2" – 2" (15 – 50mm)
contaminated water into the potable
request literature ES-WB. 800MQT – compact model with self-con-
water supply
tained ball valve shutoffs. Sizes 1⁄2" and 3⁄4"
• Sizes 1⁄2" – 2" (15 – 50mm). NPT female
(15 and 20mm)
connections

MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A
A B C D
in. mm in. mm in. mm in. mm in. mm lbs. kgs.
800M4QT/800M4FR 12
⁄ 15 5 127 61⁄4 159 29⁄16 65 311⁄16 94 3.5 1.6 C
800M4QT/800M4FR 3⁄4 20 53⁄8 137 61⁄2 165 29⁄16 65 315⁄16 100 3.5 1.6
800M4QT/800M4FR 1 25 51⁄2 139 71⁄2 191 23⁄4 70 43⁄4 121 6.0 2.7
800M4QT/800M4FR 11⁄4 32 85⁄8 219 9 229 31⁄4 83 53⁄4 146 11.0 4.9 B
800M4QT/800M4FR 11⁄2 40 9 229 91⁄2 241 31⁄4 83 61⁄4 159 13.5 6.1
800M4QT/800M4FR 2 50 91⁄2 241 95⁄8 245 31⁄4 83 63⁄8 162 18.5 8.4 D
800MQT 1⁄2 15 47⁄8 124 53⁄8 137 21⁄2 64 27⁄8 73 3.0 1.4
800MQT 3⁄4 20 47⁄8 124 53⁄8 137 21⁄2 64 27⁄8 73 3.0 1.4

60 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 188A, 288A, 289, N388 (1⁄4" – 3")
Anti-Siphon Vacuum Breakers
• Vacuum breakers are designed to protect against the backsiphonage of contaminated
water into the potable water supply.
• For health hazard cross-connections not subject to continuous pressure. 289
• Install 6" (150mm) above highest downstream point of water.
Models
Specifications 188A – Sizes: 3⁄4" – 2" (20 – 50mm) irriga-
• NPT female inlet and outlet connections, Models 188A/288A. tion vacuum breaker. Plain brass finish.
• Maximum temperature 180°F (82°C) at 125psi (8.6 bar) working pressure. 288A – Sizes: 1⁄4" – 3" (8 – 80mm), plain
brass finish.
For additional information, request literature ES-188A, ES-288A, ES-289 or ES-N388. 288AC – Sizes: 1⁄4" – 1"

4
(8 – 25mm), polished chrome finish.
289 – Sizes: 3⁄8" – 1" (10 – 25mm) spill-
resistant atmospheric vacuum breakers.

Backflow Preventers & Accessories

NPT male connections.
N388 – Sizes: 1⁄4" and 3⁄8"
(8 – 10mm) with NPT female bottom inlet
and outlet connections. Bronze body.

Series 7 (3⁄8" – 1")

Dual Check Valves
• For use at the drinking water supply service
entrance or with individual outlets
B 7
• Designed for non-health hazard residen-
tial water system containment and con- Features
tinuous pressure applications
• Can be installed vertically or horizontally
• Bronze body construction. A
• Available with an extensive combination
• Uses two compact replaceable check
of inlet/outlet sizes, types of thread and
modules.
end connections including retrofit com-
• Buna-N seals and stainless steel springs pression fittings and hose connections
• Installed immediately downstream of the • Can be installed in a variety of piping
MODEL SIZE (DN) DIMENSIONS WEIGHT
residential water meter configurations, and in conjunction with a
A B wide range of meter horns, copper setters
Specifications in. mm in. mm in. mm lbs. kgs. and meter boxes
7C 38
⁄ 10 27⁄8 73 11⁄4 32 1.6 0.7
• Temperature Range: 33°F – 140°F (0.5°C – • Testable dual check model available,
7U2-2 1⁄2 15 43⁄8 111 23⁄8 60 1.75 0.8
60°C) continuous; 180°F (82°C) intermittent Series L7U2-2
7U2-2 3⁄4 20 43⁄8 111 23⁄8 60 1.75 0.8
• Minimum Working Pressure:10psi (69 kPa)
7U2-2 1 25 43⁄8 111 23⁄8 60 1.75 0.8 For additional information, request
• Maximum Working Pressure:150psi (10.3 literature PG-7.
bar)

Series Cu7 (1⁄2" – 1")

Copper-Body
B Cu7
Dual Check Valves
• Straight line, poppet-type construction
minimizing pressure drop A Features
• Can be installed vertically or horizontally
Specifications • Lead free copper body
• Temperature Range: 33°F – 180°F • Modular check valves for
SIZE (DN) DIMENSIONS WEIGHT
(0.5°C to 82°C) continuous easy maintenance
A B
• Minimum Working Pressure:10psi • Chloramine resistant materials
in. mm in. mm in. mm lbs. kgs.
(69 kPa) of construction
12
⁄ 15 47⁄16 113 23⁄8 60 1.7 0.8
• Maximum Working Pressure: 150psi • Double unions for installation ease
3⁄4 20 47⁄16 113 23⁄8 60 1.7 0.8
(10.3 bar) • Replaceable seats
1 25 411⁄16 119 23⁄8 60 2.0 0.9 • Center stem guides for reliable seating
For additional information,
request literature, PG-7.
For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 61
 Series 8 (3⁄8" – 3⁄4")
Hose Connection Vacuum Breakers
• Health hazard, backsiphonage protection, non-continuous pressure
• Designed for attaching to sill cocks and other hose connections

Specifications 8B
• Sizes 3⁄4" (20mm) hose thread (HT) female inlet x 3⁄4" (20mm) HT male outlet connection
• Maximum Pressure: 125psi (8.6 bar). Maximum Temperature: 180°F (82°C)

Models
8* – Brass body, removable, non-draining
8A* – Patented “non-removable” feature, drainable. Interlocking spring prevents removal
4

once installed
8B* – Brass body, with breakaway set screw to prevent removal, drainable
8C, 8BC and 8AC – same as above in chrome finish
Backflow Preventers & Accessories

NF8C – Specifically designed for wall and yard hydrants, permits manual draining for
freezing conditions. Chrome finish
NF8 – same as above with brass finish
8FR
8P – Thermoplastic body with patented “non-removable” feature and equipped to allow sill
cock to be drained
S8C – Designed for tub and shower hand spray sets. Chrome finish
S8 – same as above with plain brass finish
8FR – Freeze relief feature. Protects the valve from freeze damage (Patent Pending)
*Note: Model 8, 8A, and 8B are not suitable for frost-free hydrants.
See Model NF8. For additional information, request literature ES-8.

A
MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A B
in. mm in. mm in. mm oz. gm.
8 34
⁄ HT 20 13⁄8 35 11⁄2 38 4.0 113.4 B
8A 3⁄4 HT 20 11⁄2 38 13⁄4 38 4.0 113.4
8AC 3⁄4 HT 20 11⁄2 38 11⁄2 38 4.0 113.4
8B 3⁄4 HT 20 11⁄2 38 13⁄8 35 4.0 113.4
8BC 3⁄4 HT 20 13⁄8 35 11⁄2 38 4.0 113.4
8C 3⁄4 HT 20 13⁄8 35 11⁄2 38 4.0 113.4
NF8 3⁄4 HT 20 11⁄2 38 2 50 5.3 151.2
NF8C 3⁄4 HT 20 11⁄2 38 2 50 5.3 151.2
8P 3⁄4 HT 20 13⁄4 44 13⁄8 35 2.0 56.7
S8 1⁄2 F** 15 11⁄4 32 11⁄2 38 1.5 42.5
S8C 1⁄2 F** 15 11⁄4 32 11⁄2 38 4.0 113.4
S8C 3⁄8 F** 10 11⁄4 32 11⁄2 38 4.0 113.4
8FR 3⁄4 HT 20 13⁄4 44 11⁄2 38 4.0 113.4
HT = Hose threaded connections, female inlet x male outlet connection;
** Female NPT threaded inlet x male NPT outlet connection.

Series Gov. 80 (10", 111⁄2", 121⁄2")

Ball Cock and Thermal Expansion Relief Valve
• Triple purpose product: toilet tank ball cock fill valve, anti-siphon backflow preventer and
thermal expansion pressure relief valve.

Specifications
• Maximum operating temperature 110°F (43.3°C) Gov. 80-M1
• Standard heights 10", 111⁄2" or 121⁄2" (250, 292, or 318mm)
Standards
For additional information, request literature S-Gov80. Listed by IAPMO and CSA certified for anti-
For more products to protect against thermal expansion, see pages 33-34. siphon ball cocks, FDA approved under
CFR-21-177-2600, ANSI/ASSE No. 1002.

62 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series SD2 (1⁄4" – 3⁄8")
Dual Check Valve
• Recommended for use on Post-Mix Carbonated Beverage Equipment and dispensing
SD2
equipment for tea and coffee
• Prevents the reverse flow of potentially contaminated water into the potable water Models
supply due to backpressure backflow
SD2-MN – 1⁄4" (8mm) Male NPT
• Designed for protection of the water supply from carbonated water
SD2-MN – 3⁄8" (10mm) Male NPT
• For continuous or intermittent pressure conditions
SD2-FN – 1⁄4" (8mm) Female NP
SD2-FN – 3⁄8" (10mm) Female NPT
SD2-MF – 1⁄4" (8mm) SAE Male Flare
MODEL SIZE (DN) DIMENSIONS (APPROX.) SD2-MF – 3⁄8" (10mm) SAE Male Flare

4
A B SD2-FF – 1⁄4" (8mm) SAE Female Flare
in. mm in. mm in. mm
SD2-FF – 3⁄8" (10mm) SAE Female Flare
SD2-MN 14
⁄ 8 3 76 11⁄16 27

Backflow Preventers & Accessories

SD2-MF 1⁄4 8 213⁄16 71 11⁄16 27 For additional information,
3⁄8 request literature ES-SD2.
SD2-MN 10 3 76 11⁄16 27
SD2-MF 3⁄8 10 3 76 11⁄16 27 A
SD2-FN 1⁄4 8 3 76 11⁄16 27
SD2-FF 1⁄4 8 213⁄16 71 11⁄16 27
SD2-FN 3⁄8 10 3 76 11⁄16 27 B Across
Corners
SD2-FF 3⁄8 10 3 76 11⁄16 27

Series SD3 (1⁄4" – 3⁄8")

Dual Check Valve with Atmospheric Port
• Recommended for use on Post-Mix • For continuous or intermittent pressure
Carbonated Beverage Equipment and conditions
dispensing equipment for tea and coffee • Wye strainer for water supply installations SD3
• Prevents the reverse flow of potentially
contaminated water into the potable water Models SD3-MF – 3⁄8" (10mm) Female NPT
supply due to backpressure backflow SD3-MN – 1⁄4" (8mm) Male NPT SD3-MF – 1⁄4" (8mm) SAE Male Flare
• Designed for protection of the water SD3-MN – 3⁄8" (10mm) Male NPT SD3-MF – 3⁄8" (10mm) SAE Male Flare
supply from carbon dioxide and
carbonated water
SD3-MF – 1⁄4" (8mm) Female NPT
For additional information,
request literature ES-SD3.

MODEL SIZE (DN) DIMENSIONS (APPROX.)

A
A B C D
C
in. mm in. mm in. mm in. mm in. mm
SD3-MN 14
⁄ 8 12
4⁄ 114 1⁄1 16 27 78
1⁄ 48 11 16
1 ⁄ 43
14 B
SD3-MF ⁄ 8 43⁄8 111 11⁄16 27 17⁄8 48 111⁄16 43
SD3-MN 3⁄8 10 41⁄2 114 11⁄16 27 17⁄8 48 111⁄16 43
SD3-MF 3⁄8 10 41⁄2 114 11⁄16 27 17⁄8 48 111⁄16 43 D Across
SD3-FN 1⁄4 8 41⁄2 114 11⁄16 27 17⁄8 48 111⁄16 43 Corners
SD3-FN 3⁄8 10 41⁄2 114 11⁄16 27 17⁄8 48 111⁄16 43

Series TWS (3⁄4", 1")

Key Operated Wall Hydrants for Irrigation
System Winterization
TWS
• For use on irrigation sprinkler systems Specifications
• Provides access to the home’s water • Sizes 3⁄4", 1" (20, 25mm), NPT male • Maximum Working Pressure: 175psi
supply from the outside outlet connection (12.1 bar)
• Water supply shutoff is key operated • 8", 10", 12" (200, 250, 300mm) For additional information,
• For use with pressure vacuum breaker shaft lengths request literature ES-TWS.
(PVB), atmospheric vacuum breaker • Temperature Range: 33°F – 140°F
(AVB), double check (DC) or reduced (0.5°C – 60°C) continuous; 180°F
pressure zone (RPZ) backflow preventers (82°C) intermittent
• Non-freeze wall hydrant
For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 63
 Model TK-7
• Water column sight tube for testing dual check and double check valves
• Tests individual check modules of the Watts Model 7, 709 and 007 TK-7
Wgt. 5 lbs. (2.3 kg)

For additional information,

request literature ES-TK-7.

Model TK-9A
• +/- 2% accuracy full scale
• Test kit easily connects to any testable backflow preventer assembly
4

• Designed for testing all testable backflow preventers

Maximum Pressure: 175psi (12.1 bar)
Maximum Temperature: 210°F (98.9°C)
Backflow Preventers & Accessories

Wgt. 8 lbs. (3.6 kg)

TK-9A
For additional information
request literature ES-TK-9A.

Model TK-99D
• Features 0.25% full scale accuracy
• Compact, hand held, digital backflow preventer test kit
• LCD display with oversized differential characters and separate supply pressure readout
gauge, high impact casing
• Tests RPZ’s, Double checks or PVB’s
Wgt. 3 lbs. (1.4 kgs.) TK-99D
For additional information,
request literature ES-TK-99D.

Model TK-99E
• +/- 1% accuracy full scale
• Compact test kit with color coded valves, hoses
and top mounted bleed valves
• Designed for testing all testable backflow preventers
Wgt. 8 lbs. (3.6 kg)
TK-99E

For additional information,

request literature ES-TK-99E.

Model TK-DL
with Digital Print-Out and Computer Download Capability.
• +/- 0.2% accuracy full scale
• An advanced piece of test equipment designed to make pressure and differential
gauges obsolete in the testing of backflow preventers
• Accuracy, portability, versatility and documentation TK-DL
• Contains hoses, adapters, digital print-out unit and a rugged case
For additional information,
Wgt. 15 lbs. (6.8 kg). request literature ES-TK-DL.

64 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series SS07F (4" – 10")
Stainless Steel Single Detector Checks
• For automatic fire sprinkler systems Specifications
• With optional by-pass assembly, detects • Temperature Range: 33°F – 110°F
leakage or misuse of water in fire line (0.5°C – 43°C)
• By-pass assembly kits with GPM/CFM • Rated Working Pressure: 175psi (12.1 bar). SS07F
meter. Size 3⁄4" (20mm) • 125# flanged connections For additional information,
request literature ES-SS07F.

Series TR (4" – 10")

4
Transition Riser
• Durable and easy to install underground • Ease of installation and lightweight
transition fitting to connect the municipal allows one person to position and

Backflow Preventers & Accessories

water supply into the building overhead handle the riser
TR
fire system • Minimal site preparation; joint restraint
one-piece construction reduces time • Designed to meet NFPA 24 Section 8-3.2
Features and labor; no missing parts, no leaks;
• AWWA C900 Inlet
• Reduces installation time and labor easily identifiable for approvals
• AWWA C606 Outlet
costs associated with field assembly • UL/FM approved
• Corrosion resistant stainless steel con- • Available in 4" – 10" (102 – 254mm) with For additional information,
struction type 304SST various lengths to meet all local requirements request literature ES-TR.

Series FR 500 (1⁄8" – 3⁄4")

Thermostatic Freeze Relief Kits
• Designed to keep water from freezing in Specifications
the backflow preventer
• Working Temperature: 35°F (1.6°C)
• Compact
• Maximum Pressure: 175psi (12.1 bar)
• Easy to install
• Low maintenance FR 500
• Controlled by water temperature vs. air For additional information, request literature
temperature ES-FR500.
• IAPMO approved

Series RK-W-STD
• Valve and meter support stands for quick & easy installation
• All-welded steel construction
• Corrosion resistant coating
• Interior drain hole
• Available in 10" to 38" heights
RK-W-STD

For additional information,

request literature ES-RK-W-STD.

Series WVS
Valve Setters for Quick Backflow Installation
• Available Sizes: 3”, 4”, 6”, 8” and 10” (80, 100, 150, 200 and 250mm)
• Compact
• Corrosion resistant epoxy coating WVS
• Eliminates thrust blocks at the backflow
• Custom lay lengths available For additional information,
request literature PF-WVS.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 65
 Series WB WattsBox
Backflow Preventer Freeze Protection Enclosures
• Especially made for PVB, Double check and RPZ backflow preventer assemblies that
are subjected to freezing conditions
• Construction is reinforced aluminum or fiberglass. Designed to meet NFPA guidelines.
• Easy access for testing/certification of backflow preventer
• Removable for maintenance purposes
• Available with or without thermostatically controlled heat source to provide protection to
WB
-30°F (-34°C). RPZ, protected against intrusion of foreign matter
• WattsBox enclosures are lockable and can be anchored

Specifications
4

• Flip top access, fiberglass construction enclosures for 3⁄4" – 3" (20 – 80mm) pipe size
backflow preventers and 3⁄4" – 2" (20 – 50mm) PBV’s
• Front access panel, aluminum construction enclosures for 21⁄2" – 10" (65 – 250mm) For additional information,
Backflow Preventers & Accessories

backflow preventers request literature ES-WB.

Series WattsRock
Options Features
WattsRock shell – WPLRN • Durable polyethylene shell
WattsRock shell with insulation – WPLR • Drain sizing for full port discharge
WattsRock shell with insulation and • Vandal protection
heat – WPHR • Lifelike shape and coloring
• Testing/maintenance access
• Available in two natural stone shades — WattsRock
slate grey and earthtone brown
For additional information,
request literature ES-WattsRock.

Series W-SPL and W-FLG

Make-Up Spools and Flanges
• For backflow preventers 21⁄2" – 10" (65 – 250mm)
• Make-up spools for use when retrofitting a backflow preventers into an installation where
an existing backflow preventer is being replaced
• Make-up flanges for use in piping applications where there is a need for additional fitting For additional information,
lay length request literature ES-Spools/Flanges.

66 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series B6000 (1⁄4" – 4")
B6001 ( ⁄ " – 3") 38

2-Piece, Standard Port, Bronze Ball Valves

• Two-piece ball valves B6001
• For commercial and industrial applications Features
• Suitable for a full range of liquids and gases • Sizes: 1⁄4" – 3" (8 – 80mm) have
reinforced/enhanced PTFE seats
Specifications • 4" (100mm) has virgin PTFE seats
• Pressure Rating: 1⁄4" – 3" (8 – 80mm) – 600psi (41.3 bar) WOG (non-shock) – 150psi • Chrome plated brass ball
(10.3 bar) WSP
4" (100mm) – 400psi (27.5 bar) WOG (non-shock) – 125psi (8.6 bar) • Adjustable stem packing gland
saturated steam, over 150psi (10.3 bar) requiring SS trim • Blow out proof, pressure retaining stem
• Temperature Range: 0°F to 450°F (-18°C – 232°C) at 50psi (3.4 bar) for
For additional information, request literature
reinforced/enhanced PTFE seats. 0°F – 350°F (-18°C – 177°C) at 50psi (3.4 bar)
ES-B6000.
for Virgin PTFE seats.

5
For ball valve options, refer to page 73.

Models

Ball Valves
B6000 – Sizes 1⁄4" – 4" (8 – 100mm), NPT female connections
B6001 – Sizes 3⁄8" – 3" (10 – 80mm), solder connections
B6000 – UL: UL approved for:
– Flammable liquids (YRBX)
– Compressed gas (YQNZ)
– Fire protection (HNFX), sizes 1⁄4" – 2" (8 – 50mm)
– LP Gas (YSDT), sizes 1⁄4" – 3" (8 – 80mm)
– Natural/Manufactured gas (YRPV), sizes 1⁄4" – 3" (8 – 80mm)
– For #1 and #2 Fuel Oil (MHKZ), sizes 1⁄4" – 3" (8 – 80mm)
C

Standards
Meets Federal Specification WW-V-35C, and complies with MSS-SP-110. D

L
A

MODEL SIZE (DN) BALL DIMENSIONS (APPROX.) WEIGHT

Orifice A C D L
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.

B6000 14⁄ 8 38
⁄ 9.5 5 127 34
1⁄ 45 58⁄ 16 2⁄1 16 52 0.6 0.3
B6000 38⁄ 10 38
⁄ 9.5 5 127 13⁄4 45 58⁄ 16 21⁄16 52 0.6 0.3
B6000 1⁄2 15 1⁄2 13.0 5 127 13⁄4 45 5⁄8 16 21⁄4 58 0.6 0.3
B6000 3⁄4 20 11⁄16 17.0 55⁄16 135 2 51 3⁄4 19 213⁄16 72 1.0 0.5
B6000 1 25 7⁄8 22.0 51⁄2 140 21⁄4 57 7⁄8 22 37⁄16 87 1.6 0.7
B6000 11⁄4 32 1 25.0 7 178 21⁄2 64 11⁄8 29 37⁄8 99 2.2 1.0
B6000 11⁄2 40 11⁄4 32.0 7 178 3 76 15⁄16 33 41⁄4 108 3.2 1.5
B6000 2 50 11⁄2 38.0 11 279 35⁄16 84 11⁄2 38 413⁄16 122 4.9 2.2
B6000 21⁄2 65 2 51.0 119⁄16 294 4 102 23⁄16 56 61⁄2 165 13.2 5.9
B6000 3 80 21⁄2 64.0 115⁄8 295 41⁄4 108 23⁄8 60 613⁄16 173 17.5 7.9
B6000 4 100 3 76.0 151⁄8 384 413⁄16 122 215⁄16 75 711⁄16 195 29.3 13.3
B6001 3⁄8 10 3⁄8 9.5 51⁄16 129 11⁄2 38 5⁄8 16 25⁄16 50 0.5 0.2
B6001 1⁄2 15 1⁄2 13.0 53⁄16 132 13⁄4 44 5⁄8 16 23⁄8 60 0.6 0.3
B6001 3⁄4 20 11⁄16 17.0 53⁄4 146 2 51 3⁄4 19 35⁄16 84 1.1 0.5
B6001 1 25 7⁄8 22.0 6 150 21⁄4 57 7⁄8 22 33⁄4 95 1.4 0.6
B6001 11⁄4 32 1 25.0 8 203 23⁄4 64 11⁄8 29 41⁄2 114 2.0 0.9
B6001 11⁄2 40 11⁄4 32.0 81⁄8 206 3 76 15⁄16 33 5 127 3.3 1.5
B6001 2 50 11⁄2 38.0 117⁄16 290 35⁄16 84 11⁄2 38 61⁄4 159 5.2 2.4
B6001 21⁄2 65 2 51.0 121⁄8 307 4 102 23⁄16 56 75⁄8 194 13.2 6.0
B6001 3 80 21⁄2 64.0 125⁄16 312 41⁄4 108 23⁄8 60 83⁄16 208 15.6 7.1

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 67
 Series B6080, B6081 (1⁄2" – 2")
2-Piece, Full Port, Bronze Ball Valves
• Two-piece construction
• For commercial and industrial applications
• PTFE seats and seals

Specifications
• Pressure Rating: 600psi (41.3 bar) WOG (non-shock) and 150psi (10.3 bar) WSP B6080
• Temperature Range: 0°F – 350°F (-18°C – 177°C) at 50psi (3.4 bar)
• Complies with MSS-SP-110

Models C
B6080 – Sizes: 1⁄2" – 2" (15 – 50mm), NPT female connections
B6081 – Sizes: 1⁄2" – 2" (15 – 50mm), solder connections
D
5

For ball valve options, refer to page 73.

L, L‡
For additional information, request literature ES-B6080.
A, A‡
Ball Valves

DIMENSIONS (APPROX.)
SIZE (DN) BALL ORIFICE THREADED SOLDER THREADED SOLDER WEIGHT
A A‡ C D L L‡
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
12 ⁄ 15 12
⁄ 13 25 32
4 ⁄ 121 78
4⁄ 124 58
1⁄ 41 78
⁄ 22 2⁄9 32 58 2⁄9 16 65 0.6 0.3
34
⁄ 20 34
⁄ 19 5 127 55⁄16 135 13⁄4 45 1 25 213⁄16 71 213⁄16 71 1.0 0.5
1 25 1 25 57⁄16 138 511⁄16 145 2 50 11⁄4 32 39⁄16 91 37⁄8 98 1.8 0.8
11⁄4 32 11⁄4 32 79⁄16 192 79⁄16 192 27⁄8 73 11⁄2 38 41⁄8 105 45⁄16 110 4.0 1.8
11⁄2 40 11⁄2 38 711⁄16 195 77⁄8 200 3 76 15⁄8 41 47⁄16 113 43⁄4 121 5.5 2.5
2 50 2 50 1011⁄16 272 11 279 4 102 2 50 53⁄8 137 6 152 10.0 4.5

68 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series EMVII-6400SS (1⁄4" – 3")
2-Piece, Standard Port, Bronze Electric Motor Valves
• Combination quarter-turn shutoff ball valve and electric actuator
• Compact and completely assembled

Specifications
• Steam Working Pressure: 100psi (7bar)
• Sizes: 1⁄4" – 2" (8 – 50mm) are 600psi (41.3 bar) WOG (non-shock); sizes
21⁄2" – 3" (65 – 80mm), 400psi (27.6 bar) WOG (nonshock)
• Maximum Operating Temperature: 250°F (121°C)
EMVII-6400SS
• 24VAC and 115VAC models

For additional information, request literature ES-EMVII-6400SS.

5 Ball Valves
MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
C D L
in. mm in. mm in. mm in. mm lbs. kgs. D
† EMVII-6400SS-115-8 14⁄ 8 13 16
7 ⁄ 198 58⁄ 16 14
2⁄ 57 8.75 3.9
† EMVII-6400SS-115-8 3 ⁄8 10 713⁄16 198 5⁄8 16 21⁄4 57 8.75 3.9 L
† EMVII-6400SS-115-8 1 ⁄2 15 713⁄16 198 5⁄8 16 21⁄4 57 8.75 3.9
† EMVII-6400SS-115-35 3 ⁄4 20 8 203 3⁄4 19 27⁄8 76 9.25 4.2
† EMVII-6400SS-24-40 1 25 813⁄16 208 1 25 37⁄16 87 10.25 4.6
† EMVII-6400SS-115-35 1 1 ⁄4 32 815⁄16 227 11⁄8 29 315⁄16 100 10.75 4.9
† EMVII-6400SS--24-40 1 1 ⁄2 40 91⁄8 232 13⁄8 35 45⁄16 110 11.75 5.3
† EMVII-6400SS-24-40 2 50 121⁄8 308 15⁄8 41 47⁄8 124 14.25 6.5
†† EMVII-6400SS-115-25 2 1 ⁄2 65 143⁄16 360 – – 6 1 ⁄2 165 23.00 10.4
†† EMVII-6400SS-115-25 3 80 141⁄2 368 – – 613⁄16 173 27.50 12.5
† Sizes 1⁄4" – 2" (8 – 50mm) are available 115-8, 115-35 and 24-40. †† Sizes 21⁄2" & 3" (65
and 80mm) also available 24-25.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 69
 Series B6300, B6301 (1⁄2" – 1")
2-Piece, Full Port, Ball and Waste Bronze Ball Valves
• For draining or venting of downstream line when valve is in the closed position
B6301
Specifications
• Pressure Rating: 400psi (27.6 bar) WOG (non-shock)
Temperature Range: 0°F – 350°F (-18°C – 177°C) at 50psi (3.4 bar)

Models
B6300 – Sizes 1⁄2" – 1" (15 – 25mm), NPT threaded connections.
B6301 – Sizes 1⁄2" – 1" (15 – 25mm), solder connections.

For additional information, request literature ES-B6300.

5

Series B6780 , B6781

Ball Valves

(1⁄4" – 2") (1⁄2" – 1")

2-Piece, Full Port, Bronze Diverter Ball Valves
• Two-piece construction
• Three-way diverter valve
• For residential, commercial and industrial applications

B6780
Specifications
• Pressure Rating: 400psi (27.6 bar) WOG (non-shock) and 125psi (8.6 bar)
saturated steam
• Temperature Range: 32°F – 350°F (0°C – 177°C) at 50psi (3.4 bar)

Models
B6780-M1 – Sizes 1⁄4" – 2" (8 – 50mm), NPT female connections
B6781 – Sizes 1⁄2" – 1" (15 – 25mm), solder connections

For additional information, request literature ES-B6780.

Series B6002 (1⁄4" – 1")

2-Piece, Standard Port, Bronze Ball Valves
• Male NPT connection x NPT female connection

Specifications
B6002
• Sizes: 1⁄4" – 1" (8 – 25mm), have male NPT connection x female NPT connection
• Pressure Rating: 600psi (41.3 bar) WOG (non-shock), 150psi (10.3 bar)
saturated steam
• Temperature Range: -20°F – 450°F (-29°C – 232°C) at 50psi (3.4 bar)
• Chrome plated brass ball
• Blow-out proof stem
• High cycle life reinforced PTFE stem packing seal and thrust washer

For additional information, request literature ES-B6002.

70 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series B6004 (1⁄2" – 1")
2-Piece, Standard Port, Bronze Ball Valves
• Male serrated connection x NPT female connection
• Especially for plastic and rubber hose applications
B6004
Specifications
• Sizes 1⁄2" – 1" (15 – 25mm), serrated male connection x female NPT connection
• Barbed connection sized to accept standard hose I.D. matching valve pipe size
• Pressure and temperature operating limits are governed by the type of hose and
clamps used
• Temperature Range: -20°F – 450°F (-29°C – 232°C) at 50psi (3.4 bar)
For additional information, request
• High cycle life reinforced PTFE stem packing seal and thrust washer literature ES-B6004.

5
Series B6010, B6011, B6012
B6013, B6014, B6015 ( ⁄ " – 2") 12

Ball Valves
2-Piece, Standard Port, Bronze Ball Valves
• Maintenance of ball valve can be done without dismantling pipe line
• Two-piece construction B6010

Specifications
• Sizes 1⁄2" – 2" (15 – 50mm)
• Pressure Rating: 400psi (27.6 bar) WOG (non-shock) threaded and solder ends;
not steam rated due to union gasket
• Temperature Range: 0°F – 225°F (-18°C – 107°C) at 200psi (13.8 bar)

Models
B6010 – union NPT female connection x NPT female connection, B6014 – NPT female x NPT male union,
1⁄2" – 2" (15-50mm) 1⁄2" – 1" (15 – 25mm).

B6011 – Solder union connection x solder connection, 1⁄2" – 2" B6015 – NPT female connection x union
(15 – 50mm) solder connection,
1⁄2" – 2" (1 5- 50mm).
B6012 – Solder connection x union NPT threaded female connection,
1⁄2" – 2" (15 – 50mm)
For additional information,
B6013 – Solder connection x NPT male connections, 1⁄2" – 1" (15 – 25mm) request literature ES-B6010.

Series B6400 (1⁄4" – 4")

2-Piece, Standard Port, Bronze Ball Valves with Mounting Pad
• Two-piece construction
• Bronze body
B6400
• Chrome plated brass ball
• For commercial and industrial applications

Specifications
• Sizes 1⁄4" – 4" (8 – 100mm), NPT female connections
• Pressure Rating: 1⁄4" – 2" (8 – 50mm) 600psi (41.3 bar) WOG (non-shock); 150psi
(10.3 bar) WSP
21⁄2" – 4" (65 – 100mm) 400psi (27.6 bar) WOG (non-shock);
For ball valve options, refer to page 73.
125psi (8.6 bar) WSP
For additional information, request literature
• Temperature Range: -55°F – 425°F (-48° – 218°C) at 50psi (3.4 bar) ES-B6400.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 71
 Series B6400-SE (1⁄4" – 2")
2-Piece, Standard Port, Bronze Ball
Valves with Safety Exhaust
• Two-piece construction Specifications B6400-SE
• Bronze body 14
• Sizes: ⁄ " – 2" (8 – 50mm), NPT
• Chrome plated brass ball female connections.
• For industrial air applications • Pressure Rating: 175psi (12.1 bar).
• Ideal for use where protection of machine • Temperature Range: 50°F – 120°F
tools is critical (10°C – 49°C).
• Unidirectional valve vents downstream air
For additional information, request literature
when in closed position ES-B6400-SE.

Series B6800 (1⁄4" – 2")

B6801 ( ⁄ " – 2") 12
5

3-Piece, Full Port, Brass Ball Valves

Ball Valves

• Three-piece, in-line maintenance design

• For commercial and industrial applications

Specifications
B6800
• Pressure Ratings: 1⁄4" – 1" (8 – 25mm) 600psi (41.3 bar) WOG (non-shock);
11⁄4" – 2" (32 – 50mm) rated at 400psi (27.6 bar) WOG
For additional information,
(non-shock); 150psi (10.3 bar) WSP all sizes. Over 150psi
request literature ES-B6800.
(10.3 bar) WSP requires SS trim
• Temperature Range: 0°F – 450°F (-18ºC – 232°C) at 50psi (3.4 bar)
Models C
14
B6800 – Sizes: ⁄ " – 2" (8 – 50mm) NPT female connections
B6801 – Sizes: 1⁄2" – 2" (15 – 50mm) solder connections
D
B6800SE (safety exhaust) — for downstream exhaust 1⁄4" – 2" (8 – 50mm), Virgin PTFE
seats and seals, rated at 145psi (10.0 bar) WOG, maximum L (L‡)
50°F – 120°F (10°C – 49°C)
MODEL SIZE (DN) BALL ORIFICE DIMENSIONS (APPROX.) WEIGHT
C D L (L‡)
in. mm in. mm in. mm in. mm in. mm lbs. kgs.

B6800, – 14⁄ 8 38
⁄ 10 1⁄ 34 44 78
⁄ 22 38
2⁄ 60 1.1 0.5
B6800, – 38⁄ 10 38
⁄ 10 13⁄4 44 78
⁄ 22 23⁄8 60 1.1 0.5
B6800, B6801‡ 1 ⁄2 15 1⁄2 13 13⁄4 44 7⁄8 22 23⁄8 60 1.1 0.5
B6800, B6801‡ 3 ⁄4 20 3⁄4 19 21⁄4 57 17⁄8 48 31⁄4 83 2.5 1.1
B6800, B6801‡ 1 25 1 25 23⁄4 70 13⁄8 35 37⁄8 98 4.1 1.9
B6800, B6801‡ 1 1 ⁄4 32 11⁄4 32 3 76 11⁄2 38 41⁄2 114 6.3 2.9
B6800, B6801‡ 1 1 ⁄2 40 11⁄2 38 31⁄2 89 13⁄4 44 5 127 9.3 4.2
B6800, B6801‡ 2 50 2 50 37⁄8 98 2 50 65⁄8 168 13.8 6.3
‡= Solder connections

Series B6000-CC (1⁄2" – 3⁄4")

B6001-CC ( ⁄ " – ⁄ ") 12 34

2-Piece, Standard Port, Bronze Ball Valves

Models Specifications
• B6000-CC has female NPT x 3⁄4" hose end with end cap • Pressure Rating: 200psi (13.8 bar) CWP (non-shock) B6000-CC
and chain
For additional information, request
• B6001-CC has solder end x 3⁄4" hose end with end cap literature ES-B6000.
and chain

72 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Ball Valve Options and Repair Kits
SUFFIX DESCRIPTION MODELS SIZES KIT DESCRIPTION
in. mm
AD Assembled Dry All All All *
Locking Handle
BS Balance Stop Plate B6000/B6001 14
⁄ –3 8 – 80
B6080/B6081 1⁄4 – 2 8 – 50 BHK
B6800/B6801 3⁄4 – 2 20 – 50
B6400 1⁄4 – 3 8 – 80
G Grounded Ball & Stem All SS Models 14
⁄ –3 8 – 80 *
GS Grounded Stem All All All *
SC Satin Chrome B6000/B6001 All All *
SE Safety Exhaust B6400/B6800/B6801 All All * Oval Handle
SS Stainless Steel Ball & Stem All All All BSK-SS
UL UL Approved B6000/B6001 14
⁄ –2 8 – 50 *
B6800/B6801

5
VT (01) Virgin Teflon® Seat & Seal PTFE All All All SSK-01
Z15 Without Lever & Nut B6000/B6001 All All *

Ball Valves
B6800/B6801
04 Mineral Filled PTFE B6000/B6001 All All *
B6800/B6801/B6400 Round Handle
HANDLE OPTIONS
LC Latch Lock Lever Handle B6800/B6800SE 14
⁄ –2 8 – 50 LL-HK
Closed Position (without lock) B6400SE (specify closed position)
LH Locking Lever Handle B6000/B6001 12
⁄ –2 15 – 50
(without lock) B6400/B6400SE 14
⁄ –4 8 – 100 LH-HK
B6800/B6801 1⁄2 – 2 15 – 50 Tee Handle
LL Latch Lock Lever Handle B6000/B6001 12
⁄ –2 15 – 50
B6400/B6400SE 14
⁄ –4 8 – 100 LL-HK
B6800/B6801 1⁄2 – 2 15 – 50 (without lock)
OV Oval Handle All All All OH-HK
RH Round Handle All 14
⁄ –2 8 – 50 RH-HK
SH Stainless Steel Lever Handle & Nut All 14
⁄ –2 8 – 50 SH-HK0
TH Tee Handle All All All TH-HK Extended Handle
XH Extended Lever Handle All 14
⁄ –2 8 – 50 XHK-LH
* NOTE: Ball valve option only, no kit available
For additional information, request literature PL-RP-GP.

Series IT6300, IS6301 (1⁄2" – 1")

2-Piece, Full Port, Ball and Waste Brass Ball Valves
• Drain cock allows draining of downstream line when valve is in closed position
IT6300
Specifications
• Pressure Rating: 600psi (41.3 bar) WOG (non-shock)

Models
IT6300 – Sizes 1⁄2" – 1" (15 – 25mm), NPT threaded connections
For additional information, request
IS6301 – Sizes 1⁄2" – 1" (15 – 25mm), solder connections literature ES-IT6300.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 73
 Series FBV, FBVS (1⁄2" – 2")
2-Piece, Full Port, Bronze Ball Valves
• Excellent for throttling and balancing applications
• For non-abrasive liquids or gases
• Two-piece construction
FBV
Specifications
• PTFE seats.
• Pressure Rating: 1⁄2" – 2" (15 – 50mm), 600psi (41.3 bar) WOG
(non-shock), and 125psi (8.6 bar) WSP
21⁄2" & 3" (non-shock) (65 – 80mm) 400psi (27.6 bar)
WOG and 125psi (8.6 bar) saturated steam
• Temperature Range: 0°F – 350°F (-18°C – 177°C) at 50psi (3.4 bar)
5

FBV-3C, FBVS-3C (1⁄4" – 3")

Ball Valves

2-Piece, Full Port, Brass Ball Valves

• Suitable for a full range liquids and gases
• Complies with MSS-SP-110
FBV-3C
• Certified to NSF/ANSI Standard 61
• CSA approved (1⁄2" – 2" threaded only), UL/FM approved (1⁄2" – 2" threaded only),
UL Listed (1⁄2" – 2" solder)

Specifications
• Temperature Range: -40°F to 400°F (-40°C to 204°C)
Models
FBV-3C – 1⁄4" – 3" (8 – 80mm) threaded
• Pressure Ratings:
end connections
FBV-3C: 1⁄4" – 2" (8 – 50mm)
FBVS-3C – 1⁄2" – 3" (15 – 80mm) solder
• 600psi (41.3 bar) WOG, non-shock end connections
• 150psi (10.3 bar) WSP
21⁄2" – 3" (65 – 80mm)
• 600psi (41.3 bar) WOG, non-shock
Handle Options
Available with 2" stem extension, memory
• 125psi (8.6 bar) WSP
stop, oval and tee handles.
FBVS-3C: 1⁄2" – 2" (15 – 50mm)
• 600psi (41.3 bar) WOG, non-shock For additional information, request literature
• 150psi (10.3 bar) WSP ES-FBV-3C.
21⁄2" – 3" (65 – 80mm)
• 400psi (27.5 bar) WOG, non-shock
• 125psi (8.6 bar) WSP

74 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
FBV-3-PP (1⁄2" – 2")
2-Piece, Full Port, Brass Ball Valves with Copper Tailpieces
• Designed for use with ProPress® piping systems
• Complies with MSS-SP-110
• UL Listed FBV-3-PP

Specifications
• Temperature Range: -40°F to 250°F (-40°C to 121°C)
• Maximum Pressure Rating: 600psi (41.3 bar) WOG
• Crimp Connection Rating: 200psi (13.4 bar), refer to press piping system guidelines

Series FBV-4, FBVS-4 (1⁄4" – 3")

5
2-Piece, Full Port, Brass Ball Valves
• Suitable for a full range of liquids or gases FBV-4

Ball Valves
• Complies with MSS-SP-110

Models Specifications
FBV-4 14
⁄ " – 3" (8 – 80mm) threaded end connections Temperature Range: -40ºF to 400ºF (-40ºC to 204ºC)
FBVS-4 1⁄2" – 3" (15 – 80mm) solder end connections Pressure Rating: 1⁄4" – 2"
600psi (41.3 bar) WOG non-shock
150psi (10.3 bar) WSP
For additional information, request 21⁄2" – 3"
literature ES-FBV-4. 400psi (27.6 bar) WOG non-shock
125psi (8.6 bar) WSP

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 75
 Series WBV-3, WBVS-3 (1⁄8" – 4")
2-Piece, Standard Port, Brass Ball Valves
• Suitable for full range of liquids and gases
• Virgin PTFE stem packing seal
• Adjustable stem packing gland
• Vinyl insulator on heavy duty Zinc plated carbon steel handles
• 1⁄4-turn open or close operation
WBVS-3
• Low operating torque

Specifications Handle Options

• Pressure Rating: 400psi (27.6 bar) WOG (non-shock) Available with 2" stem extension, memory
stop, oval and tee handles.
Models
For additional information, request literature
WBV-3 – Sizes 1⁄8" – 4" (3 – 100mm), NPT threaded connections ES-WBV-3.
WBVS-3 – Sizes 3⁄8" – 3" (10 – 80mm), solder connections
5

Series WBVC (1⁄2" – 1")

Ball Valves

2-Piece, Standard Port, Brass Ball Valves

• For a full range of gases and liquids on commercial, residential and industrial applications WBVC

Models For additional information, request literature

WBVC – Sizes 1⁄2" – 1" (15 – 25mm), male NPT compression connections ES-WBVC.

Series S-FBV-1, C-FBV-1 (1⁄4" – 3")

2-Piece, Full Port, Carbon and Stainless Steel Ball Valves
• Two-piece, full port, investment cast ball valves C-FBV-1
• For commercial and industrial applications

Specifications
• Pressure Rating: 1000psi (69.0) WOG (non-shock), 125psi (8.6 bar) WSP

Standards
Conforms to Federal Specification WW-V-35C, Type II, Composition BZ, Style 3
S-FBV-1
Models For additional information, request literature
C-FBV-1 – Sizes: 1⁄4" – 3" (8 – 80mm) carbon steel, NPT female connections ES-S-FBV-1 or ES-C-FBV-1
S-FBV-1 – Sizes: 1⁄4" – 3" (8 – 80mm) stainless steel, NPT female connections

Series PBV (1⁄2" – 2")

Grey PVC, Plastic Ball Valves
• Excellent corrosion and chemical resistance
• PTFE seats and O-ring seal
PBV-T
• Designed for Schedule 80 applications Compact PVC Plastic Ball Valves
• Will fit Schedule 40 pipe PBV-S – socket connections
• NSF approved PBV-T – threaded connections
True Union Plastic Ball Valves (TPBV)
Specifications Sizes 1⁄2" – 2" (15 – 50mm) have
• Pressure Rating: 150psi (10.3 bar) @ 73°F (23°C) Two union socket weld connectors and
two union threaded connectors to allow a
For additional information, request literature ES-PBV or ES-TPBV.
choice of end connections.

76 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series G4000M1 (2" – 6")
Series G4000M (8" – 10")
2-Piece, Full Port, Cast Iron Flanged Ball Valves
• Fast quarter-turn operation G4000M1
• 304 Stainless steel ball and stem
• Same end-to-end dimensions (ANSI B16.10) and flange dimensions (ANSI B16.1) as an
ANSI Class 125 cast iron, flanged gate valve

Models
G4000M1 Predator™ Series – Sizes 2" – 6" (50 – 150mm), flanged ball valves with
125psi (8.6 bar) steam rating. 200psi (13.8 bar) CWP (non-shock) at 140°F (60°C).
G4000M1-GO – Sizes 2" – 6" (50 – 150mm), same as G-4000M1, except comes with
manual gear operator. G4000M1-GO
G4000-FDA – Sizes: 2" – 6" (50 – 150mm) interior and exterior fused epoxy coating, FDA
approved, with lever handle. 200psi (13.8 bar) CWP (non-shock) at 140°F (60°C).

5
G4000M – Sizes 8", 10" (200, 250mm), with manual gear operator. 200psi (13.8 bar) CWP
(non-shock) at 140°F (60°C).
G4000M-FDA – Sizes 8" – 10" (200 – 250mm), FDA approved fused epoxy coating, with

Ball Valves
manual gear operator. 200psi (13.8 bar) CWP (non-shock) at 140°F (60°C).

For pneumatic or electric actuated valve operation, consult your Watts agent or Customer
Service at (978) 689-6066.
For additional information, request literature ES-G4000, ES-G4000-FDA, ES-G4000M1 or
ES-G4000M1-GO.

Series GBV (3⁄8" – 1")

2-Piece, Brass Gas Ball Valves
• Brass two-piece body construction
• Available with tee handle or square handle

Models GBV
GBV – Sizes 3⁄8" – 1" (10 – 25mm), NPT female connections and tee handle.
GBV-SQH – Sizes 3⁄8" – 1" (10 – 25mm), NPT female connections and square handle.
GBV-FL – Sizes 1⁄2" x 3⁄8", 1⁄2" x 1⁄2", 3⁄4" x 5⁄8" (15 x 10, 15 x 15, 20 x 24mm), Female NPT x
Flare connections and tee handle.
GBV, GBV-SQH and GBV-FL – rated 32°F to 125°F (0°C – 52°C). CSA approved @ 1⁄2, 2
and 5psi (3.4, 13.8, 34.5 kPa). UL listed @ 5psi (34.4 kPa).
GBV-ST – Sizes 1⁄2" x 1⁄2", 3⁄4" x 3⁄4" with side tap.

For additional information, request literature ES-GBV. GBV-ST

Series GBV-1 (1⁄2" – 3⁄4")

1-Piece, Brass Gas Ball Valves
• Sizes 1⁄2" and 3⁄4" (15 – 20mm) NPT female connections
• New Blowout Proof Stem Design

Features
• Patented Blowout Proof Stem Design
GBV-1
• One-piece Body
• UL approved @ 5psi (34.4 kPa)
• Approved by CSA @ 1⁄2, 2 and 5psi (3.4, 13.8, 34.5 kPa). UL listed @ 5psi (34.4 kPa)
• Capacity: 1⁄2" @ 295 ft.3/hr., 3⁄4" @ 760 ft.3/hr
• Tested under Standards Z21.15 IAS Requirement

For additional information, request literature ES-GBV-1.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 77
 Series B-3000, B-3001 (1⁄2" – 2")
Class 125, Bronze Gate Valves
• Threaded bonnet
• Non-rising stem (NRS)
• Solid wedge disc
Models
Specifications B-3000 – Sizes 1⁄2" – 2" B-3000
• Pressure Rating: 125psi (8.6 bar) WSP (15 – 50mm), ANSI/ASME B1.20.1
to 335° F (178°C) /200psi (13.8 bar) threaded end connections
WOG non-shock B-3001 – Sizes 1⁄2" – 2"
• Complies with MSS-SP-80 Type 1 (15 – 50mm), ANSI/ASME B16.18 solder
end connections For additional information, request
literature ES-B-3000.

Series B-3100, B-3101 (1⁄2" – 2")

Class 125, Bronze Gate Valves
• Threaded bonnet
6

• Rising stem
• Solid wedge disc
Gate / Globe / Check Valves

Specifications Models
• Pressure Rating: 125psi (8.6 bar) WSP B-3100 – Sizes 1⁄2" – 2"
to 335° F (178°C) /200psi (13.8 bar) (15 – 50mm), ANSI/ASME B1.20.1 B-3101
WOG non-shock threaded end connections
• Complies with MSS-SP-80 Type 1 B-3101 – Sizes 1⁄2" – 2"
(15 – 50mm), ANSI/ASME B16.18
For additional information, request
solder end connections
literature ES-B-3100.

Series B-3110, B-3111( ⁄ " – 2") 12

Class 150, Bronze Gate Valves

• Union bonnet
• Rising stem
• Solid wedge disc Models
B-3110 – Sizes 1⁄2" – 2" (15 – 50mm),
Specifications ANSI/ASME B1.20.1 threaded end
connections B-3110
• Pressure Rating: 150psi (10.3 bar) WSP
to 366°F (186°C)/300psi (20.7 bar) B-3111 – Sizes 1⁄2" – 2" (15 – 50mm),
WOG non-shock ANSI/ASME B16.18 solder end
connections For additional information, request
• Complies with MSS-SP-80 Type 1 literature ES-B-3110.

Series B-3030 (1⁄2" – 2")

Class 300, Bronze Gate Valves
• Union bonnet
• Rising stem
• Solid wedge disc

Specifications Models
• Pressure Rating: 300psi (20.7 bar) WSP B-3030 – Sizes 1⁄2" – 2" B-3030
to 421°F (216°C)/1000psi (69.0 bar) (15 – 50mm), ANSI/ASME B1.20.1 thread-
WOG non-shock ed end connections For additional information, request
• Complies with MSS-SP-80 Type 1 literature ES-B-3030.

78 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series B-4000 (1⁄4" – 3"), B-4001 (3⁄8" – 2")
Class 125, Bronze Globe Valves
• Union bonnet
• Inside screw
• Rising stem
Models
• G/F PTFE disc
B-4000 – Sizes 1⁄4"- 3" (8 – 80mm), B-4000
Specifications ANSI/ASME B1.20.1 threaded end
connections
• Pressure Rating: 150psi (10.3 bar) WSP
to 366°F (186°C)/300psi (20.7 bar) B-4001 – Sizes 3⁄8" – 2" (10 – 50mm),
WOG non-shock ANSI/ASME B16.18 solder end
connections For additional information, request
• Complies with MSS-SP-80 Type 2 literature ES-B-4000.

Series B-4030 (1⁄4" – 2")

Class 300, Bronze Globe Valves
• Union bonnet
• Bronze disc

6
• Integral seat
• Inside screw
• Rising stem

Gate / Globe / Check Valves

Models B-4030
Specifications
14
B-4030 – Sizes ⁄ " – 2"
• Pressure Rating: 300psi (20.7 bar) WSP
to 421°F (216°C)/600psi (41.3 bar) (8 – 50mm), ANSI/ASME B1.20.1
WOG non-shock threaded end connections For additional information, request
literature ES-B-4030.
• Complies with MSS-SP-80 Type 1

Series B-5000, B-5001 (1⁄2" – 2")

Class 125, Bronze Swing Check Valves
• Screw cap
• Integral seat
• Wye pattern swing type disc
B-5001
Specifications Models
B-5000 – Sizes 1⁄2" – 2"
• Pressure Rating: 125psi (8.6 bar) WSP
(15 – 50mm), ANSI/ASME B1.20.1thread-
to 353°F (178°C)/200psi (13.8 bar)
ed end connections
WOG non-shock
B-5001 – Sizes 1⁄2" – 2"
• Complies with MSS-SP-80 Type 3
(15 – 50mm), ANSI B16.18 solder For additional information, request
end connections literature ES-B-5000.

Series B-5030 (1⁄2" – 2")

Class 300, Bronze Check Valves
• Wye pattern
• Integral seat
• Swing type disc B-5030

Specifications
• Pressure Rating: 300psi (20.7 bar) WSP Models
to 421°F (216°C)/600psi (41.3 bar) B-5030 – Sizes 1⁄2" – 2"
WOG non-shock (8 – 50mm), ANSI/ASME B1.20.1 threaded
For additional information, request
• Complies with MSS-SP-80 Type 3 end connections literature ES-B-5030.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 79
 Series 6 (1⁄4" – 1")
Brass Midi Check Valves
• Install in a horizontal or vertical position
• Positive back stop
6
• Silent operation

Specifications Models
• Maximum Working Pressure: 200psi Series 6 – Sizes 1⁄4" – 1" (8 – 25mm), NPT For additional information,
(13.8 bar) threaded female connections request literature ES-ICVF-125.
• Maximum Temperature: 180°F (82°C)

Series 600, 601S (1⁄4" – 2")

Bronze Silent Check Valves
Models
600
600
• Teflon® seat and brass disc
• Install in a horizontal or vertical position
6

• Stainless steel guide rod and spring

• Silent check operation
• Prevents water hammer
Gate / Globe / Check Valves

Sizes 1⁄4" – 2" (8 – 50mm), NPT threaded female connections; 15psi (1 bar) WSP @ 250°F 600-Z3 – Sizes 3⁄4", 11⁄2" (20, 40mm), NPT
(121°C), and 400psi (27.6 bar) WOG non-shock @ -20°F to 100°F (-29° to 38°C) female connection; 400psi (27.6 bar) WOG
601, 601S non-shock @-20°F to 100°F; 150psi (10.3
• Similar to Model 600 but especially designed for well pump service and other bar) WSP @ 360°F. Heavy duty construc-
applications requiring tight seating tion; stainless steel disc, spring and guide
rod
• Bronze seat with Viton® disc
Sizes 1⁄4"-1⁄2" (8 – 15mm) threaded connections, 1⁄2" – 1" (15 – 25mm), solder connections; For additional information, request literature
400psi (27.6 bar) WOG. @100ºF (38ºC) ES-600, ES-601 or ES-600-Z3.

Series ICV-125-2-2-T (2" – 24")

Cast Iron Wafer Check Valves
Specifications
• Designed for HVAC and general service applications
• A Buna-N seat, bonded to the valve body, provides leak tight sealing from
-40°F – +250°F (-40°C – 121°C)
• Designed and tested according to API 594 for use between
ANSI Class 125 or 150 flanges ICV-125-2-2-T
• Lightweight, compact design, easy installation
• PTFE bearings and 316 stainless steel springs
• Standard ASTM A216 cast iron body with aluminum-bronze disc plates
• 2"-12" (50-300mm): 200psi (13.8 bar) CWP @ 150ºF (66ºC), 14"-24" (350-600mm):
150psi (10.3 bar) CWP @ 150ºF (66ºC) For additional information,
request literature ES-ICV-125-2-2-T.
• Silent check valve eliminates water hammer effect

Series ICVW-125 (2" – 10")

Cast Iron, Silent Check Valves
Specifications
• Designed for HVAC and general applications
• Can be installed either horizontally or vertically to provide shutoff to 200psi @ 150°F
(13.8 @ 66°C).Consult factory for proper installation in vertical position ICVW-125
• For use between ANSI Class 125 and Class 250 flanges For additional information,
• ASTM A-126 Class B cast iron body with B-62 bronze globe style disc and seat request literature ES-ICVW-125.
• 316SS conical spring
• Silent check valve operation eliminates water hammer effect

80 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series ICVF-125 (2" – 12")
Flanged Cast Iron Silent Check Valves

Specifications
• Designed for HVAC and general applications
• Can be installed either horizontally or vertically to provide shutoff to 200psi @ ICVF-125
150°F.Consult factory for proper installation in vertical position
• For use between ANSI Class 125 and Class 250 flanges
• ASTM A-126 Class B cast iron body with B-62 bronze globe style disc and seat
• 316SS conical spring For additional information,
• Silent check valve operation eliminates water hammer effect request literature ES-ICVF-125.

Series F-503 (2" – 24")

Class 125, Cast Iron Gate Valves
• Outside stem & yoke (OSY)
• Bolted bonnet

6
• Solid wedge disc
• Bronze mounted

Gate / Globe / Check Valves

Specifications Models
• Pressure Rating: 125psi (8.6 bar) WSP F-503 – Sizes 2" – 24" F-503
to 353°F (178°C) (50 – 610mm), ANSI B16.1 flanged
• Pressure Rating: 200psi (13.8) WOG connections
non-shock (2" – 12") For more information,
request literature ES-F-503.
• Complies with MSS-SP-70 Type 1

Series F-502 (2" – 10")

Class 125, Cast Iron Gate Valves
• Non-rising stem (NRS)
• Bolted bonnet with open/close indicator
• Solid wedge disc
• Bronze mounted

Specifications Models F-502

• Pressure Rating: 125psi (8.6 bar) WSP F-502 – Sizes 2" – 10" (50 – 254mm),
to 353°F (178°C)/200psi (13.8 bar) ANSI B16.1 flanged connections
WOG non-shock
For more information, request
• Complies with MSS-SP-70 Type 1 literature ES-F-502.

Series F-501 (2" – 8")

Class 125, Iron Globe Valves
• Outside stem & yoke (OSY)
• Bronze mounted
• Bolted bonnet

Specifications Models F-501

• Pressure Rating: 125psi (8.6 bar) WSP F-501 – Sizes 2" – 8" (50 – 203mm), ANSI
to 353°F (178°C)/200psi (13.8 bar) WOG B16.1 flanged connection
For more information, request
• Complies with MSS-SP-85 Type 1 literature ES-F-501.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 81
 Series F-511 (2" – 10")
Class 125, Iron Check Valves
• Cast iron body
• Bronze trim
• Bolted cover

Specifications Models
• Pressure Rating: 125psi (8.6 bar)
F-511
F-511 – Sizes 2" – 10"
WSP/200psi (13.8 bar) WOG (50 – 254mm), IBBM, ANSI B16.1 flanged For additional information,
• Complies with MSS-SP-71 Type 1 connections request literature ES-F-511.

Series 408-OSY-RW (21⁄2" – 12")

OSY Flanged Gate Valves
• ASTM A-126 Class B cast iron shutoff valves
• UL Listed, FM approved
• ANSI B16.1 flanged connections
• Complies with MSS-SP-70
• For distribution service and fire main shutoff
6

Specifications Models
Gate / Globe / Check Valves

• Pressure Rating: 175psi (12.1 bar) CWP 408-OSY-RW – Sizes 21⁄2" – 12" 408-OSY-RW
• Maximum Temperature: 140°F (60°C) (65 – 300mm), flanged connections.
• Epoxy coated For additional information,
• Resilient wedge (Buna-N) request literature ES-408-OSY-RW.

Series 403RT-RW (2" – 8")

Ring-tite Gate Valve
• Irrigation and water shutoff distribution service
• Resilient wedge gate

Specifications Models
• Pressure Rating: 200psi (13.8 bar) CWP 403RT-RW – Sizes 2" – 8" (50 – 200mm),
403RT-RW
• Maximum Temperature: 140°F (60°C) ring tite connections
ASTM A126 Class B cast iron. Epoxy For additional information,
coated internally and externally request literature ES-403RT-RW.

Series 405, 406 (2" – 12")

NRS Flanged Gate Valves
• ASTM A-126 Class B cast iron shutoff valves for water service

Specifications
• Pressure Rating: 200psi (13.8 bar) CWP
• Epoxy coated
406-NRS-RW – Sizes 2" – 12" (50 –
• Maximum Temperature: 140°F (60°C)
300mm), flanged connections. AWWA
• ANSI B16.1 flanged connections C509 specifications. Resilient wedge 406E
design. Non-rising stem. For potable
Models water, water distribution service, sewage
405RW – Sizes 2" – 12" (50 – 300mm), disposal facilities.
flanged connections. Non-rising stem, 406E – Sizes 2" – 12" (50 – 300mm),
resilient wedge design. For irrigation and flanged connections. MSS-SP70. IBBM For additional information, request literature
water distribution service. style, non-rising stem. ES-405RW, ES-406-NRS-RW or ES-406E.

82 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 411 (2" – 12")
Class 125, Iron Swing Check Valves
• For water service on municipal and private fire mains and sprinkler systems
• UL/FM Listed, except 2" and 12"

Specifications Models 411

• Pressure Rating: 200psi (13.8 bar) WOG 411 – Sizes 2" – 12" (50 – 300mm), cast
• Maximum Temperature: 180°F (82°C) iron body and disc, with Buna-N disc seat,
• ASTM A-126 Class B cast iron body ANSI B16.1 flange connections, epoxy
coated internally and externally For additional information,
• Complies with MSS-SP-71 request literature ES-411.

Series GV, GVS, GLV (1⁄4" – 4")

Bronze Shutoff Valves
• For general service on water, steam, oil or compressed gas

6
Specifications Models
• Pressure Rating: 125psi (8.6 bar) GV gate valves – Sizes 1⁄4" – 4"

Gate / Globe / Check Valves

WSP/200psi (13.8 bar) WOG (8 – 100mm), NPT female threaded
• Maximum Temperature: 353°F (178°C) connections, non-rising stem GV
GVS gate valves – Sizes 3⁄8" – 3" (10 –
80mm), solder connections, non-rising stem.
GLV globe valves – Sizes 1⁄4" – 2"
(8 – 50mm), NPT female threaded For additional information, request literature
connections, swivel type disc. ES-GV, ES-GVS or ES-GLV.

Series WGV ( ⁄ " – 4") 12

Brass Gate Valves

• For shutoff service
• Non-rising stem (NRS)
WGV
Specifications Models
• Pressure Rating: 200psi (13.8 bar) WOG • WGV (round handle) – Sizes
1⁄2" – 4" (15 – 100mm), NPT female
• Maximum Temperature: 180°F (82°C)
threaded connections
• WGVS (round handle) – Sizes 1⁄2" – 2"
(15 – 50mm), solder connections
• WGV-X (cross handle) – Sizes 3⁄8" – 3"
(10 – 80mm), NPT female For additional information,
threaded connections request literature ES-WGV.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 83
 Series WGV-1, WGVS-1, WGVC ( ⁄ " – 4") 12

Brass Gate Valves

• For general shutoff applications
• Non-rising stem (NRS)

Specifications Models WGVC

WGV-1, WGVS-1 WGV-1 – Sizes 1⁄2" – 4" (15 – 100mm),
• Pressure Rating: 200psi (13.8 bar) WOG NPT threaded connections
• Maximum Temperature: 180°F (82°C) WGVS-1 – Sizes 1⁄2" – 3"
(15 – 80mm), solder connections
WGVC
WGVC – Sizes 1⁄2", 3⁄4"
• Pressure Rating: 125psi (8.6 bar) WOG For additional information,
(15 – 20mm), compression ends
• Maximum Temperature: 140°F (60°C) request literature ES-WGV, ES-WGVS or
ES-WGVC.

Series 805-1, 807-1 (1⁄2" – 2")

Stainless Steel Gate and Globe
6

• Corrosion resistant
• Cast stainless construction
Gate / Globe / Check Valves

805-1
Specifications Models
• Pressure Rating: 125psi (8.6 bar) WSP 805-1 (gate valve) – Sizes 1⁄2" – 2"
and 200psi (13.8 bar) WOG. ANSI (15 – 50mm), non-rising stem, NPT
B1.20.1 threaded ends female connections
807-1 (globe valve) – Sizes 1⁄2" – 2"
(15 – 50mm), rising stem, NPT For additional information, request literature
female connections ES-805-1 or ES-807-1.

84 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series WCV (1⁄2" – 4")
Brass Swing Check Valves
• For one-way flow of water and steam applications

Models WCV
WCV – Sizes 1⁄2" – 4" (15 – 100mm), NPT WCV-2 – Sizes 1⁄2" – 2" (15 – 50mm), NPT
threaded female connections. Pressure threaded female connections. Rubber seat
rating 125psi (8.6 bar) WSP/200psi (13.8 material is NBR. Pressure rating 200psi
bar) WOG. (13.8 bar) WOG. Maximum temperature
WCVS – Sizes 1⁄2" – 2" (15 – 50mm), sol- 140°F (60°C).
der connections. Pressure rating 125psi For additional information, request
(8.6 bar) WSP/200psi (13.8 bar) WOG. literature ES-WCV.

Series 806-1 (1⁄2" – 2")

Wye-type Stainless Steel Check Valves

6
• For water and steam one-way flow

806-1

Gate / Globe / Check Valves

Specifications Models
Pressure Rating: 125psi (8.6 bar) WSP @ 806-1 – Sizes 1⁄2" – 2" (15 – 50mm) NPT
350°F (177°C) /200psi (13.8 bar) WOG @ threaded female connections For additional information, request literature
150°F (66°C). ES-806-1.

Series CV, CVY (3⁄8" – 4")

Bronze Swing Check Valves
• For one way flow on water, steam, gas or oil lines
• Used to prevent reverse fluid flow

CVY
Specifications Models
• Pressure Rating: 125psi (8.6 bar) WSP CV – 90° straight pattern – Sizes: 3⁄8" – 4"
and 200psi (13.8 bar) WOG (10 – 100mm), NPT threaded female
connections
CVS – 90° straight pattern – Sizes: 1⁄2" – 3"
(15 – 80mm), solder end connections
CVY – Wye pattern – Sizes: 3⁄8" – 2"
(10 – 50mm), NPT female connections
CVYS – Wye pattern – Sizes: 1⁄2" – 2" For additional information, request literature
(15 – 50mm), solder end connections ES-CV, ES-CVY, ES-CVS or ES-CVYS.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 85
 Series 77S (1⁄4" – 3")
Cast Iron Wye-pattern Strainers
• For liquid or steam service
• Install strainers up stream of equipment that need protection from scale, rust, dirt, etc
77S
Specifications Models
Pressure Rating: (non-shock) 250psi WSP 77S-M1 – Sizes: 1⁄4" – 3" (8 – 80mm), NPT 77SI – Sizes: 1⁄4" – 3" (8 – 80mm), NPT
(17.2 bar) @ 406°F (208°C), 400psi WOG threaded female inlet/outlet connections. threaded female connections.
(27.6 bar) @ 150°F (66°C) Sizes 1⁄4" – 21⁄2" (8 – 65mm) have 20 Sizes 1⁄4" – 2" (8 – 50mm) have 20 mesh
mesh strainer screen; 3" size has 3⁄64" strainer screen. Size 21⁄2" (65mm) and 3"
For additional information, perforated screen. Working pressures (80mm) have 3⁄64" (1mm) perforated
request literature F-C77. same as 77SI. screens.

Series 77F-DI-125, 77F-DI-250,

77F-DI-FDA-125 (2" – 12")
Iron Body, Flanged End, Wye-pattern Strainers
• For liquid and steam service to protect check valves, backflow preventers and similar
controls from foreign matter.
• ANSI Class 125 and 250
77F-DI-FDA
7

Models
77F-DI-125 – cast iron body, ANSI Class 125 flanged connections. Pressure rating of (non- Note: Self-cleaning can be accomplished
by opening a valve or removing the closure
Strainers

shock) 125psi (8.6 bar) WSP @ 353°F (178°C), 200psi (13.8 bar) WOG @ 210°F (99°C) comply
plug attached to the blow-off outlet.
with MIL-S 16293 Type II.
Blow-Off Outlet: Tapped NPT female. Plug
77F-DI-250 – ductile iron body, ANSI Class 250 flanged connections. Pressure ratings of
not provided.
(non-shock) 250psi (17.2 bar) WSP @ 406°F (208°C), 500psi WOG (34.4 bar) @ 150°F
(66°C). End Flanges: The dimensions and drilling
of end flanges conform to the American
77F-DI-FDA-125 – Class 125 flanged connections. Double coated, electrostatically cast iron flange standard, Class 125 and
applied heat fused epoxy coating on interior/exterior. FDA approved suitable for potable 250 (ANSI B16.1.)
water/food contact. Ideal for liquid service where a non-corrosive construction/clean cos-
For additional information, request literature
metic appearance is required. Water pressure 200psi (13.8 bar) @ 140°F (60°C). Not for ES-77F-DI-125, ES-77F-DI-250 or F-C77.
use on steam or gas.

Series 777 (1⁄4" – 4")

Bronze Wye-type Strainers
• For liquid or steam service to protect valves or
similar controls from foreign matter

Specifications 777
Sizes: 1⁄4" – 4" (8 – 100mm) NPT female
Maximum Working Pressure: 400psi WOG threaded inlet/outlet connections
(27.6 bar); 4" 777 & 777S 300psi
(20.7 bar) WOG and 125psi WSP (8.6 777S – retainer cap tapped for closure
bar) plug (plug not furnished) –Sizes 1⁄2" – 4"
(15-100mm), NPT female threaded (15 – 50mm), solder end connections
Sizes 1⁄4" – 21⁄2" (8 – 65mm) have a 20 S777SI – wye type, solder connections,
connections
mesh strainer screen. Size 3" (80mm) has 400 WOG/125WSP with tapped retainer
3⁄64" (1mm) perforated screen, and 4" 777SI – wye type, threaded connections,
with tapped retainer cap and closure plug. cap and closure plug. Sizes 1⁄2" – 2"
(100mm) has 1⁄8" (3mm) perforated screen (15 – 50mm)
Sizes 3⁄8" – 3"
(10 – 80mm)
Models S777 – solid retainer cap – Sizes 1⁄2" – 2"
For additional information, request literature
777 – solid retainer cap for strainer screen. (15 – 50mm), solder end connections ES-777, ES-777SI or ES-S777.
S777S – retainer cap tapped for closure
plug (plug not included) - Sizes 1⁄2" – 2"

86 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 77F-BI (2" – 8")
Bronze, Flanged, Wye-pattern Strainers
• For liquid or steam service

Specifications 77F-BI
Sizes 2" – 12" (50 – 300mm), bronze ASTM B-62 body, screen cover and plug (furnished),
and 304SS screen openings of 3⁄64" (1mm) for 2" – 3" and 1⁄8" (3mm) for 4" – 8". The 77F-
BI is U.L. listed. Flanges in accordance with ANSI B16.1, Class 125. Working pressures of For additional information, request
150psi WSP (10.3 bar) @ 406°F (208°C), 225psi (15.5 bar) @ 150°F (66°C). literature ES-77F-BI.

Series 27 (1⁄8" – 1⁄2")

Bronze Compact Vee-pattern Water Strainers
• For beverage dispensers, ice cube machines, dental equipment, instrument control
systems and similar applications
27
Models
27 – Sizes 1⁄8" – 1⁄2" (3 – 15mm), NPT female threaded connections. Standard screen is 40
mesh, other mesh types available, consult factory. Maximum pressure 250psi CWP (17.2 bar). For additional information, request
literature ES-27.

7
Model 745

Strainers
(3⁄4")
45° Wye-pattern Bronze Strainers
• For applications where scheduled cleaning of the strainer screen makes a hand
removable knurled retainer cap desirable

Models 745
34
745 – Size ⁄ " (20mm), NPT female connections, 80 mesh strainer screen. 250psi WOG
(17.2 bar) @ 210°F (99°C), and 50psi WSP (345 kPa) @ 280°F (138°C). For additional information, request
literature ES-745.

Series 17 (3⁄4" – 1")

Bronze In-line Single Union End Strainers
• For quick removal of equipment for cleaning, or where feed line separation is required
17
Models
17 – Sizes 3⁄4", 1" (20, 25mm), union end, NPT threaded female connections, #40 mesh
strainer screen standard
For optional screens, consult factory.
Specifications For additional information, request
• Pressure Rating: 250psi (17.2 bar) WOG @ 180°F (82°C) literature ES-17.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 87
 Series 88CSI (1⁄2" – 2")
Cast Steel, Wye-Pattern Strainers
• For liquid or steam service
• Threaded NPT or socket weld 88CSI
Specifications 88CSI-T – Threaded NPT
Sizes 1⁄2" – 2" (15 – 50mm), ASTM A-216 WCB body, ASTM A-105 retainer cap and plug
88CSI-SW – Socket Weld
(furnished), non-asbestos cap gasket, and 304SS screens of 1⁄32" (.8mm) for 1⁄2"-11⁄2" and
3⁄64" (1mm) for 2". Working pressures of 600psi WSP (41.3 bar) @ 489°F (254°C), 1480psi
For additional information,
WOG (102 bar) @ 100°F (38°C). request literature ES-88CSI.

Series 77F-CSI (1⁄2" – 12")

Cast Steel, Flanged, Wye-pattern Strainers
• For liquid or steam service

Specifications
Sizes 1⁄2" – 12" (15 – 300mm), ASTM A-216 WCB body and screen cover, ASTM A-105 77F-CSI
plug (furnished), PTFE gasket, and 304SS screens of 1⁄32" (.8mm) for 1⁄2"-11⁄2", 3⁄64" (1mm)
for 2" – 3" (50 – 80mm) and 1⁄8" (3mm) for 4" – 12" (100 – 300mm).
7

Flanges in accordance with ANSI B16.1, Class 150. Working pressures of 150psi WSP
(10.3 bar) @ 400°F (204°C), 285psi WOG (19.6 bar) @ 100°F (38°C). For additional information,
request literature ES-77F-CSI.
Strainers

Series 87SI (1⁄2" – 3")

Stainless Steel, Wye-pattern Strainers
• For liquid or steam service
• Threaded NPT or socket weld
87SI
Specifications
Sizes 1⁄2" – 2" (15 – 50mm), ASTM A-351 316SS body and retainer cap, PTFE cap gasket,
and 304SS screens of 1⁄32" (.8mm) for 1⁄2" – 2" (15 – 50mm) and 3⁄64" (1mm) for 21⁄2" – 3"
(65 – 80mm). Working pressures of 300psi WSP (20.7 bar) @ 400°F (204°C), 720psi WOG For additional information,
(49.6 bar) @ 100°F (38°C). request literature ES-87SI.

Series P777-100 (1⁄4", 3⁄8")

Plastic Body Wye Strainers
• 45° acetal plastic wye strainers for OEM applications requiring an inexpensive cor-
rosion resistant material

P777-100
Specifications Models
• Pressure Rating: 300psi CWP P777-100 – Sizes 1⁄4", 3⁄8" (8, 10mm) has
100 mesh screen, NPT female connections For additional information, request
• NSF approved acetal plastic
literature ES-P777.

88 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 88S (1⁄4" – 2")
Stainless Steel Wye-pattern Strainers
• For liquid and steam service to protect mechanical equipment from debris
• ANSI Class 600: Liquids 1440psi (99 bar) @ 100°F (38°C), Steam 600psi (41.3 bar) @
489°F (254°C) 88S
Specifications
Sizes 1⁄4"- 2" (8-50mm), NPT threaded female connections, perforated strainer screen 1⁄16" For additional information,
(2mm). All 316SS construction. request literature ES-88S.

Series 77F-CSSI (1⁄2" – 12")

Stainless Steel, Wye-pattern Strainers
• For liquid or steam service

Specifications
Sizes 1⁄2"- 12" (15 – 300mm), ASTM A-351 316SS body and screen cover, ASTM A-182 77F-CSSI
316SS plug (furnished), PTFE gasket, and 304SS screens of 1⁄32" (.8mm) for 1⁄2" – 11⁄2",
3⁄64" (1mm) for 2" – 3" (50 – 80mm), and 1⁄8" (3mm) for 4" – 12" (100 – 300mm).

Flanges in accordance with ANSI B16.1 Class 150. Working pressures of 150psi WSP For additional information,
(10.3 bar) @ 400°F (204°C), 275psi WOG (18.9 bar) @ 100°F (38°C). request literature ES-77F-CSSI.

7 Strainers
Series 77F-SS, 77G-SS (21⁄2" – 12")
Stainless Steel Wye-pattern Strainers, Flanged and Grooved
• Light weight, 304SS corrosion resistant alternative to cast iron strainers
• For liquid service
• Complies with NSF 61 and FDA standards
• Blow off outlet tapped NPT female
77G-SS
Specifications
• Sizes 21⁄2" – 12" (65-300mm)
• Pressure Rating: 200psi (13.8 bar) WOG (nonshock) at 150°F (66°C) For additional information,
• ANSI B16.1 Class 125 flange dimensions and drilling request literature ES-77F/77G.

Series 777C (3⁄4" x 1")

Bronze Combination Strainer and Check Valve
• Used with backflow preventers to protect check assemblies from fouling due to
dirt and debris
• Especially well suited for use on RPZ assemblies on dead end service 777C-M1

Specifications Models
• Maximum Pressure: 200psi (13.8 bar) 777C-M1 – Size 3 ⁄ 4 " x 1" (20 x For additional information, request literature
• Maximum Temperature: 210°F (99°C) 25mm) female inlet x male outlet ES-777C-M1.
connection

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 89
 Series 97FB-CI (2" – 12")
Cast Iron, Simplex Basket Strainers
• For liquid and steam service

Specifications Models
Sizes 2" – 12" (50 – 300mm), ASTM A-126 97FB-CIB – Bolted cover 97FB-CI 97FB-CIB
Class B cast iron body, screen cover, and 97FB-CIC – Clamp cover
plug (furnished). Non-asbestos gasket and
Working Pressures:
304SS perforated screens of 3⁄64" (1mm)
for 2" – 3" (50 – 80mm), 1⁄ 8" (3mm) for 97FB-CIB – 125psi (8.6 bar) WSP/ 200psi
4" – 12" (100 – 300mm). (13.8 bar) WOG
Flanges in accordance with ANSI B16.1 97FB-CIC – 50psi (3.4 bar) WOG
Class 125. For additional information,
request literature ES-97FB-CI.

Series 97FB-CSSI (2" – 12")

Cast 316SS Flanged Basket Strainers
• For liquid service only Models
97FD-CSSIB – Bolted screen retainer cover
Specifications 97FD-CSSIC – Clamp screen retainer cover
Body, cover, and plug are constructed of
Working Pressures: 97FB-CSSIB
ASTM A-351 Grade CF8M cast 316SS.
7

The gasket materials is PTFE. All perforated 97FD-CSSIB – 275psi (13.8 bar) WOG
For additional information,
strainer screens are 304SS. 97FD-CSSIC – 50psi (3.4 bar) WOG request literature F-C77.
Strainers

Series 97FD-CI (5" – 14")

Cast Iron, Duplex Basket Strainers
• For liquid service only

Specifications Models 97FD-CIB

Sizes 5" – 14" (125 – 350mm), ASTM A- 97FD-CIB – Bolted cover
126, Class B cast iron body, screen cover, 97FD-CIC – Clamp cover
and plug (furnished). Non-asbestos gasket Working Pressures:
and 304SS perforated screens of 1⁄8" (3mm).
97FD-CIB – 200psi (13.8 bar) WOG
Flanges in accordance with ANSI B16.1
97FD-CIC – 50psi (3.4 bar) WOG
Class 125. For additional information,
request literature F-C77.

Series 97FB-FSFE (3" – 10")

UL/FM Fire Service Steel Strainer
• Used in conjunction with a water spray system to protect system against clogging that
can be caused by particles fouling the small discharge opening of the sprinkler heads.
Designed to trap foreign material 1⁄8" diameter or larger

Specifications
• Epoxy coated steel strainer, flange x flange, groove x groove or groove x flange with
multiple cleanouts 97FB-FSFE
• 304 stainless steel strainer element
• Sizes 3", 4", 6", 8" and 10" (80, 100, 150, 200 and 250mm)
• Maximum Working Pressure: 175psi (12.1 bar)
• Temperature Range: 140°F (60°C)
• Body material Corrosion resistant fusion-bonded epoxy-lined and coated steel
• Flanges AWWA Class "D" Grooves AWWA C606

For additional information, request literature ES-97FB/GB.

90 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series CSM-61 (1⁄2" – 3")
Flow Measurement Valves
• Used for hot or chilled water units for system balancing/flow measurement

Models Applications CSM-61-M1

CSM-61-M1-T – bronze body – Sizes • Fan coil units
1⁄2" – 3" (15 – 80mm), NPT female
• Unit ventilators
threaded inlet/outlet • Convectors
• Water source heat pumps
CSM-61-M1-S – bronze body – Sizes 1⁄2", • Small residential boilers/circuits
3⁄4", 1", 21⁄2" (15, 20, 25, 65mm), • Finned radiation
solder connections • Reheat coils For additional information,
request literature ES-CSM-61.
CSM-61-M2-S – bronze body – Sizes 11⁄4", • Unit heaters
11⁄2" and 2" (32, 40, 50mm), • Small domestic hot water lines
solder connections

Series CSM-81 (21⁄2" – 8")

Flow Measurement Valves
• Used for hot or chilled water units for system balancing/flow measurement

Models
CSM-81-F – semi-steel body – Size • Finned radiation
21⁄2" – 8" (65 – 200mm), flanged connections. • Reheat coils CSM-81-F
• Unit heaters
Applications • Small domestic hot water lines
• Fan coil units • Convectors

8
• Unit ventilators • Small residential boilers/circuits For additional information,
• Water source heat pumps request literature ES-CSM-81.

Balancing & Flow Measurement

Series CSM-91 (21⁄2" – 12")
Large Flow Measurement Valves
• For medium and large flow rate HVAC systems and pump package/cooling towers
• Easy installation and positive shutoff for servicing equipment
• Incorporates a micrometer type handwheel adjustment
• Tamper-proof memory stop CSM-91
* Note: Series CSM-91 valves are shipped
Models as a straight pattern from the factory. To
CSM-91* – Sizes 21⁄2" – 12" (65 – 300mm), grooved end connections. Ductile iron body convert to an angle pattern, refer to IS-
Sheet shipped with valve.
ASTM A536 GR65-45-12. Maximum working pressure 375psi (25.8 bar). Maximum
temperature 230°F (110°C). For additional information,
request literature ES-CSM-91.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 91
 Series TDV (21⁄2" – 12")
Combination Balancing, Shutoff, and Check Valve for Single,
Double, and Vertical In-line Pump Applications
• Combines functions of a positive hand-tight shutoff valve, check valve and flow
control valve into one versatile package
TDV
Models
TDV – Sizes 21⁄2" – 12" (65 – 300mm), grooved end connections. Ductile iron body.
Anti-rotation lugs on inlet/outlet of the body
• Grooved ends: Maximum working pressure 375psi (25.8 bar). Maximum
temperature 230°F (110°C)

Note: Series TDV valves are shipped as a straight pattern from the factory. To convert to an
angle pattern, refer to instruction sheet shipped with valve.
For additional information, request literature ES-TDV.

Series PG
Pressure Differential Gauges for Testing Flow Measurement
Valves/Orifices for Watts Series CSM/FMO.
• Used to check differential pressures
across system components
PG-8
Models
8

PG-2 – 0 – 16 ft. of water PG-6 – 0 – 50 in. of water

(0 – 4,876.8 kgs./m2) (0 – 1,270 kgs./m2)
PG-3 – 0 – 35 ft. of water
Balancing & Flow Measurement

PG-8 – 0 – 135 in. of water

(0-10,668 kgs./m2) (0 – 3,429 kgs./m2)
PG-4 – 0 – 100 in. of water
(0 – 2,540 kgs./m2)
PG-5 – 0 – 200 in. of water For additional information,
(0 – 5,080 kgs./m2) request literature ES-PG-2-6, ES-PG-8.

92 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series GBF-H, GBF-G (2 ⁄ " – 10") 12

Grooved End Butterfly Valves

• For positive shutoff service on commercial, irrigation, HVAC and industrial applications
• Ductile iron body
• Grooved end designed to ANSI/AWWA C-606 Rigid Grooved Specification

Specifications
• Maximum Operating Temperature: 275°F (135°F)
• Maximum Operating Pressure: 175psi (12.1 bar) CWP
GBF-G
Models
• GBF-H with lever handle
• GBF-G with gear operator

For additional information, request literature ES-GBF.

GBF-H

GxG Butterfly Valves E

SIZE (DN) DIMENSIONS WEIGHT
A B C D E
D
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.

2⁄12 65 3⁄78 98 2⁄78 73 9 16

2⁄ 65 4 102 58
1⁄ 41 8.51 3.87
3 80 37⁄8 98 39⁄16 90 215⁄16 75 45⁄16 109 15⁄8 41 10.08 4.58
4 100 49⁄16 116 41⁄2 115 35⁄8 92 5 128 15⁄8 41 15.93 7.24
B
6 150 5 7 ⁄8 149 65⁄8 169 51⁄4 133 515⁄16 151 21⁄8 54 30.34 13.79
C
8 200 5 1 ⁄4 134 813⁄16 223 61⁄2 166 75⁄8 194 215⁄16 58 46.18 20.99
10 250 65⁄16 160 1013⁄16 274 81⁄2 216 75⁄8 194 23⁄16 56 75.22 34.19

9
A

Gear Operator Butterfly Valves

SIZE (DN) DIMENSIONS WEIGHT H L
GEAR RATIO A D H L
in. mm in. mm in. mm in. mm in. mm lbs. kgs.
2⁄12 65 24:1 5⁄ 34 146 4 102 12
2⁄ 64 12
7⁄ 191 11.06 24.38
3 80 24:1 53⁄4 146 4 102 21⁄2 64 71⁄2 191 11.06 24.38 A
4 100 24:1 53⁄4 146 4 102 21⁄2 64 71⁄2 191 11.06 24.38
6 150 24:1 53⁄4 146 4 102 21⁄2 64 71⁄2 191 11.06 24.38 D
8 200 30:1 12 305 6 152 3 76 101⁄2 267 23.90 52.69
10 250 30:1 12 305 6 152 3 76 101⁄2 267 23.90 52.69

Handle Length
SIZE (DN) WEIGHT
F F
in. mm in. mm lbs. kgs.

21⁄2 65 109⁄16 268 1.58 3.48

3 80 109⁄16 268 1.58 3.48
4 100 109⁄16 268 1.58 3.48
6 150 143⁄16 360 1.58 3.48
8 200 151⁄2 394 3.64 8.02
10 250 151⁄2 394 3.64 8.02

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 93
 Series DBF (2" – 12") , BF (2" – 48")
Butterfly Valves
• For positive shutoff service on commercial, irrigation, HVAC and industrial applications

Specifications
*DBF – Sizes 2" – 12" (50 – 300mm), pressure 200psi (13.8 bar) WOG
BF – Sizes 2" – 24" (50 – 600mm), pressure 200psi (13.8 bar) WOG for 2" – 12"
(50 – 300mm) and 150psi (10.3 bar) for 14" – 48" (350 – 1200mm)
Sample Ordering Number: 10-DBF-03-121-1G
10 = 10-inch (250mm) size; DBF-03 = full lug style butterfly valve;
1 = cast iron body; 2 = aluminum bronze disc; 1 = 416SS shaft;
1 = EPDM seat; and G = gear operator
Designation Definitions: Add the appropriate designations required.
DBF for sizes: 2" – 12" (50 – 300mm)
BF for sizes: 2" – 48" (50 – 1200mm)
Style
03 - Full lug Seat Features
04 - Wafer 1 - EPDM§ Temperature -15°F – • Full lug and wafer styles
275°F (-26°C – 135°C) • Cast iron body, 416 stainless
Body
2 - Buna-N Temperature -15°F – steel shaft
1 - Cast Iron (ASTM-A126 Class B)
180°F (-26°C – 82°C)
2 - Ductile Iron (ASTM-A536) • Mounting pad for 10-position lever,
§Note: Do not use EPDM when hydro- gear operator, or actuator
30" – 48" only carbons are present.
Disc • Extended neck for 2" (50mm)
Operator of insulation
1 - Ductile Iron (ASTM-A126) 0– Bare shaft (no handle) • Pinned disc
2 - Aluminum Bronze (ASTM-A296) G** - Gear operator • Dead-end service rated lug style
3 - 316 Stainless Steel (ASTM-A351) 5– Lever handle (10-position), Sizes:
Shaft 2" – 12" (50 – 300mm) only For additional information,
request literature ES-DBF or ES-BF.
P** – Positioning/locking kit with handle,
9

1 - 416 Stainless Steel *(316SS shaft

on 316SS disc models) Sizes: 2" – 12" (50 – 300mm) only
2 - 431 Stainless Steel Sizes
Butterfly Valves

30" – 48" (750 – 1200mm)

Standards
For use with ANSI Class 125 or 150 flanges. Complies with API 609 and MSS-SP-67
SF – Assembled silicone free (available in DBF models only)
Electric Actuators
PF – Reversing Actuator – Output torque: 400 – 2000 in.-lb. (45 – 226 N-m)
For additional information, request literature F-PF.
Notes:
*DBF series butterfly valves use domestic and foreign components that have been
assembled and tested in the U.S.A.
**Kits for suffix (G) gear operator & (P) positioning/locking service with handle are available.
Gear Operators – High mechanical efficiency reduces the required input effort. Two self-
locking adjusting screws give a ± 5° adjustment at end of 90° travel.
For additional information, request literature F-P/E-AC.

94 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
 G

SIZE DIMENSIONS (APPROX.) TAPPED LUG DATA †WEIGHT

(DN) A G N (Bolt) (03) Full Lug (04) Wafer
in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs.

2 50 103⁄4 273 31⁄16 77 58

⁄ -11UNCx11⁄4 16x32 8 4 5 3 A
21⁄2 65 115⁄8 295 31⁄16 77 58
⁄ -11UNCx13⁄8 16x35 10 5 7 4 N
3 80 121⁄8 308 31⁄16 77 5⁄8-11UNCx13⁄8 16x35 10 5 7 4
4 100 135⁄8 346 35⁄8 92 5⁄8-11UNCx11⁄2 16x38 17 8 11 5
5 125 145⁄8 371 35⁄8 92 3⁄4-11UNCx13⁄4 19x44 23 11 16 8
6 150 155⁄8 397 35⁄8 92 3⁄4-11UNCx13⁄4 19x44 29 14 19 9
8 200 187⁄8 479 41⁄2 115 3⁄4-11UNCx21⁄8 19x54 39 18 30 14
10 250 211⁄4 540 41⁄2 115 7⁄8-11UNCx21⁄4 22x57 61 28 45 21
12 300 245⁄8 625 51⁄2 140 7⁄8-11UNCx21⁄4 22x57 113 52 73 34
14 350 263⁄4 679 51⁄2 140 1-8UNCx21⁄4 25x57 154 70 97 44
16 400 30 762 73⁄4 197 1-8UNCx33⁄8 25x86 200 91 138 63
18 450 311⁄2 800 73⁄4 197 11⁄8-7UNCx4 29x102 272 124 182 83
20 500 355⁄8 905 73⁄4 197 11⁄8-7UNCx5 29x127 396 180 260 118
24 600 43 1092 107⁄8 276 11⁄4-7UNCx53⁄4 32x146 610 277 465 211
30 760 5413⁄16 1391 1113⁄16 300 11⁄4-7UNC-2B 32 1388 630 – –
36 900 613⁄4 1567 1113⁄16 300 11⁄2-6UNC-2B 40 2058 934 – –
42 1050 741⁄8 1882 1113⁄16 300 11⁄2-6UNC-2B 40 2794 1268 – –
48 1200 8125⁄32 2077 1313⁄16 350 11⁄2-6UNC-2B 40 3954 1794 – –
† Weights are for valves with stainless steel discs.
Weights for 2" – 12" have 10- position lever handles; 14" – 24" with bare stem;
30" – 48" with gear operator.
For additional dimensional data, request literature F-CDBF.

Positioning/Locking Kit Standard Lever Handle/Latch Plate Gear Operator

9 Butterfly Valves
SIZE (DN) GEAR OPERATOR POSITIONING/LOCKING CHAINWHEELS
in. mm Kit No. Kit No. Kit No. Chain 2” Sq. Nut

2 50 GA-1-M3 #1 POS-LOCK-M2 #2 BCWK #2 BCWC OPN-BFG

21⁄2 65 GA-1-M3 #1 POS-LOCK-M2 #2 BCWK OPN-BFG
3 80 GA-1-M3 #1 POS-LOCK-M2 #2 BCWK OPN-BFG
4 100 GA-2-M3 #2 POS-LOCK-M2 #2 BCWK OPN-BFG
5 125 GA-3-M3 #3 POS-LOCK-M2 #2 BCWK OPN-BFG
6 150 GA-3-M3 #3 POS-LOCK-M2 #2 BCWK OPN-BFG
8 200 GA-4-M3 #4 POS-LOCK-M2 #3 BCWK #3 BCWC OPN-BFG
10 250 GA-5-M3 #5 POS-LOCK-M2 #3 BCWK OPN-BFG
12 300 GA-6-M3 #6 POS-LOCK-M2 #3 BCWK OPN-BFG
14 350 GA-6-M3 N/A #3 BCWK OPN-BFG
16 400 GA-7-M3 N/A #4 BCWK -----
18 450 GA-8-M3 N/A #4 BCWK -----
20 500 GA-9-M3 N/A #4 BCWK -----
24 600 GA-10-M3 N/A #5 BCWK #5 BCWC -----
Chain Wheel Kits attach to gear actuator handwheel.
2" (50mm) nuts are installed on gear operator shafts.
To operate Watts’ butterfly valves with 2" (50mm) square nut, a gear operator must be used
by removing gear handwheel and installing 2" (50mm) nut on gear shaft. Valve should be
installed in line such that gear shaft is vertical for 2" (50mm) nut operation.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 95
 Series 1156F, 1450F (1⁄2")
Feed Water Pressure Regulators and Dual Controls
for Hot Water Boilers
• Used on boiler feed lines to provide make up water to the system
• Highest capacity performance
• Unique unitized construction for ease of maintenance
S1156F
Specifications Models
Feed water regulators • Regulator set at 15psi (103.4 kPa), 1156F/1156F – A NPT threaded inlet
• Maximum Working Pressure: 100psi adjustment range 10-25psi (68.9-172.4 kPa) and outlet
(689.5 kPa) 1156F – A 1⁄2" female bottom connection
• Maximum Temperature: 212°F (100°C) For additional information, for installation of expansion tank
request literature ES-1156 or ES-1450F. S1156F – union solder inlet
T1156F – union threaded inlet
MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT B1156 – bronze body with NPT threaded
A B
inlet and outlet
in. mm in. mm in. mm lbs. kgs. SB1156F – bronze body with union
solder inlet
HIGH CAPACITY FEED WATER REGULATORS
TB1156F – bronze body with union
1156F 12
⁄ 15 31⁄2 89 53⁄8 137 2.1 0.95 threaded inlet
1156F-A 12
⁄ 15 31⁄2 89 53⁄4 146 2.1 0.95 Series 1450F – combines features of
T1156F 1⁄2 15 41⁄4 108 53⁄8 137 2.2 1.0 1156F and rugged iron body diaphragm
S1156F 1⁄2 15 41⁄8 105 53⁄8 137 2.3 1.0 relief valve. Set @ 30psi
B1156F* 1⁄2 15 31⁄2 89 53⁄8 137 2.1 1.0
SB1156F* 1⁄2 15 43⁄8 108 53⁄8 137 2.2 1.0 Features
TB1156F* 1⁄2 15 41⁄8 105 53⁄8 137 2.3 1.0
3⁄4
• High capacity fast fill and purge capability
N256* 20 4 100 63⁄8 162 3.5 1.6
• Built-in check and strainer
DUAL CONTROLS – REGULATOR AND RELIEF VALVE
• Iron and bronze construction
1450F 12
⁄ 15 61⁄2 165 53⁄8 137 3.3 1.5
T1450F 12
⁄ 15 73⁄8 184 53⁄8 137 3.3 1.5
S1450F 1⁄2 15 7 178 53⁄8 137 3.5 1.6
STRAINER, REGULATOR AND RELIEF VALVE
B
T145B* 12
⁄ 15 4 100 63⁄8 162 3.3 1.5
REGULATOR AND STRAINER
T156B* 12
⁄ 15 81⁄2 216 53⁄8 137 2.5 1.1
A
*Bronze Body
10

Series 911 (1⁄2")

Hydronics / Steam Heating Products

Combination Backflow Preventer and Fill Valve

for Hot Water Boilers
• Used on boiler supply feed lines to provide make-up water to the boiler and prevent
backflow when supply pressure falls below system pressure
• An assembly of Watts 9D Backflow Preventer and 1156F feed water pressure regulator
911
Specifications Models Features
• Maximum Working Pressure: 100psi 911T – NPT x NPT connections • Pre-assembled for ease of installation
(689.5 kPa) 911S – solder x NPT connections • Easy service accessibility
• Maximum Temperature: 212°F (100°C) B911 (T) (S) – all bronze construction • High capacity fill valve for quick system
• Boiler fill valve set at 15psi (103.4 kPa) filling and purging
Adjustable range 10 – 25psi For additional information, • Size 1⁄2" x 1⁄2" (15 x 15mm)
(68.9 – 172.4 kPa) request literature ES-911.

MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT

A B
B
in. mm in. mm in. mm lbs. kgs.
911T 12
⁄ 15 81⁄2 216 51⁄4 133 4.2 1.9
911S 12
⁄ 15 81⁄2 216 51⁄4 133 4.2 1.9
B911T 1⁄2 15 81⁄2 216 51⁄4 133 4.2 1.9
B911S 1⁄2 15 81⁄2 216 51⁄4 133 4.2 1.9 A

96 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series ET (1⁄2" – 3⁄4")
Non-potable Water Expansion Tanks for
Hot Water Heating Systems
• Designed to control the thermal expansion of hot water in closed loop heating systems

Specifications Round expansion tanks: Model

• Maximum Working Pressure: 60psi
ET-15, 30, 60: Size: 1⁄2" (15mm); NPT
Option ET-15
male connection
(413.7 kPa) add Suffix:
ET-90: Size: 3⁄4" (20mm); NPT male
• Maximum Temperature: 240°F (116°C) connection ASF – for one Model ET (expansion tank),
one Model AS (air separator) and one
A Model FV-4 (float vent) in a package.
Specify 1" (25mm) or 11⁄4" (32mm) size for
air separator.

For additional information,

B request literature PG-ThermalExpansion.
For information on ASME rated tanks,
request literature ES-ETA or ES-ET-RA.
ET-15

MODEL VOLUME ACCEPTANCE CONNECTION DIMENSIONS (APPROX.) WEIGHT

Volume Size (DN) A B C
gals. liters gals. liters in. mm in. mm in. mm in. mm lbs. kgs.
ROUND TANKS
ET-15* 2.1 8 1.4 5.0 12
⁄ 15 77⁄8 200 117⁄8 301 – – 5.0 2.3
ET-30* 4.7 18 3.0 11.4 12
⁄ 15 105⁄8 270 15 381 – – 8.0 3.6
ET-60 6.6 25 4.3 16.0 1⁄2 15 121⁄4 311 15 381 – – 14.0 6.4
ET-90 13.0 49 8.0 30.0 3⁄4 20 15 381 211⁄8 536 – – 26.5 12.0
* Available in pallet quantities: ET-15 contains 78 pcs., ET-30 contains 48 pcs.

Series ETA 15 – ETA 240

ASME Pressurized Expansion Tanks for
Heating and Cooling Systems
• Designed to absorb the expansion forces and control the pressure in heating and
cooling systems
• ASME fixed bladder type precharged expansion tank 10
Specifications Features Construction ETA
• Maximum Design Pressure: ETA 15
Hydronics / Steam Heating Products

• ASME Section VIII Construction Shell: Carbon steel

through ETA 60: 150psi (10 bar). ETA 80 • Heavy Duty Butyl Bladder Bladder: Heavy duty Butyl
through ETA 240: 125psi (8.5 bar)
• Precharged to 12psi (Field Adjustable) Exterior: Primer coated
Precharged to 12psi (83 kPa)
• Maximum Temperature: 240°F (115°C) For additional information,
request literature ES-ETA.

Series ET-RA 35 – ET-RA 2000

ASME Pressurized Expansion Tanks
for Heating and Cooling Systems
• Designed to absorb the expansion forces and control the pressure in heating and
cooling systems
ET-RA
• ASME removable bladder type pre-charged expansion tank

Specifications Features Construction

• Maximum Design Pressure: 125psig* • ASME Section VIII Code Construction Shell: Carbon steel
(8.5 bar). • Removable Butyl Bladder Bladder: Heavy duty Butyl
• Maximum Design Temperature: 240°F • Precharged to 12psi (Field Adjustable) Exterior: Primer coated
(115°C). Precharged to 12psi (83 kPa). For additional information,
*200 and 250psig available. request literature ES-ET-RA.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 97
 Series ETX, ETSX ( ⁄ " – 1 ⁄ ") 12 14

Pressurized Expansion Tanks for

Heating and Cooling Systems*
• Designed to absorb the thermal expansion of hot water in
closed loop heating systems.

Features
• Precharged at 12psi (82.7 kPa)
• Rugged flexible butyl diaphragm
• In-line and free standing models ETX
• Compatible with glycol in systems
• Steel construction

Models
ETX Mounts to supply piping
ETSX Free standing

Ratings
Maximum Working Temperature: 240˚F (115˚C)
Maximum Working Pressure:
ETX-15, ETX-30, ETX-60: 75psi (517 kPa)
ETX-90 and ETSX Series: 100psi (6.9 bar)
Precharge (field adjustable): 12psi (82.7 kPa)

ETSX
10

Dimensions – Weights
Diameter
Hydronics / Steam Heating Products

MODEL TANK VOL. ACCEPT. CONNECTION DIAMETER HEIGHT WEIGHT

VOL.
gal. @12 psi in mm in mm lbs. kgs.
ETX-15 2.1 1.0 1⁄2" MNPT 8 203 121⁄2 318 5.0 2.3
ETX-30 4.5 2.5 1⁄2" MNPT 11 279 14 356 10.0 4.54 Diameter
ETX-60 6.0 3.0 1⁄2" MNPT 113⁄8 290 173⁄16 437 11.5 5.22
ETX-90 15.0 6.0 3⁄4" MNPT 16 406 2013⁄16 528 28.0 12.70
ETSX-30 15.0 6.0 1" FNPT 16 406 2111⁄16 551 32.0 14.51 Height
ETSX-40 20.0 8.0 1" FNPT 16 406 2813⁄16 732 39.0 17.69
ETSX-60 33.0 13.3 1" FNPT 16 406 4213⁄16 1087 57.0 28.85
ETSX-90 44.0 17.7 11⁄4" FNPT 21 533 363⁄16 919 72.0 32.66 Height
ETSX-110 62.0 24.9 11⁄4" FNPT 21 533 477⁄8 1217 112.0 50.80
ETSX-160 81.0 32.6 11⁄4" FNPT 21 533 62 1575 123.0 55.79
*Not for use on potable water systems

ETX ETSX

98 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Combination Packages ET-ASF
Series HP – includes air separator, 1⁄8" and 1⁄2" (3 and 15mm) service check valves, float vent, fill
valve (some models include combination fill valve and backflow preventer) and expansion tank
Series HP Bronze – includes bronze air separator, (2) 1⁄2" (15mm) service check valves, 1⁄2" (15mm)
FV-4M1 float vent, bronze combination fill valve and backflow preventer and expansion tank
Series HPP – boiler trim out package
Series ET-ASF – includes air separator, float vent, and expansion tank
For additional information request literature PG-HHS.
HP-C

HP Bronze

FLOW
SERVICE FLOAT VENT FILL VALVE / CHECK
AIR SEPARATOR CHECK VALVE FV-4M1 DUO VENT FILL VALVE BACKFLOW PREVENTER 2000-M5 EXPANSION TANK
MODEL 1" 11⁄4" 1⁄8" 1⁄2" 1⁄8" 1⁄8" B1156 911S B911S 1"
25mm 32mm 3mm 15mm 3mm 3mm 25mm
SERIES HP — BOILER TRIM-OUT PACKAGES ET-15 ET-30 ET-90
HP-C X X X X X X
HP-D X X X X X X
HP-15C X X X X X X
HP-15D X X X X X X
HP-30 BC X X X X X X
HP-30 BD X X X X X X
HP-15 BC X X X X X X
HP-15 BD X X X X X X
HP-15 BF X X X X X X
HP-30 BF X X X X X X
HPP X X X X X X X
SERIES HPX — EXPANSION TANK TRIM-OUT PACKAGES ETX-15 ETX-30
HPX-C X X X X X X
HPX-D X X X X X X
HPX-15C X X X X X X
HPX-15D X X X X X X
HPX-30 BC X X X X X X
HPX-30 BD X X X X X X
HPX-15 BC X X X X X X
HPX-15 BD X X X X X X
SERIES ET-ASF — COMBINATION PACKAGES ET-15 ET-30 ET-90
ET-15-ASF X X X
ET-15-ASF X X X
ET-30-ASF X X X
ET-30-ASF
ET-60-ASF X
X X
X
X
X
10
ET-60-ASF X X X
SERIES ETX-ASF — COMBINATION PACKAGES ETX-15 ETX-30
Hydronics / Steam Heating Products

ETX-15-ASF X X X

SERIES HP BRONZE — BOILER TRIM OUT PACKAGES

MODEL* AIR SEPARATORS SERVICE FLOAT VENT FILL VALVE/ EXPANSION TANK
CHECK VALVE BACKFLOW PREVENTER ET-15 ET-30
AS-B-S AS-B-T FV-4M1 B911S
1" (25mm) 11⁄4" (32mm) 1" (25mm) 11⁄4" (32mm) 12
⁄ " (15mm) 12 ⁄ " (15mm) 1⁄2" (15mm) 12
⁄ " (15mm) 12
⁄ " (15mm)
HP-15C-AB-S X 2 X X X
HP-15D-AB-S X 2 X X X
HP-15C-AB-T X 2 X X X
HP-15D-AB-T X 2 X X X
HP-30C-AB-S X 2 X X X
HP-30D-AB-S X 2 X X X
HP-30C-AB-T X 2 X X X
HP-30D-AB-T X 2 X X X
SERIES HPX BRONZE — EXPANSION TANK TRIM OUT PACKAGES ETX-15 ETX-30
HPX-15C-AB-S X 2 X X X
HPX-15D-AB-S X 2 X X X
HPX-15C-AB-T X 2 X X X
HPX-15D-AB-T X 2 X X X
HPX-30C-AB-S X 2 X X X
HPX-30D-AB-S X 2 X X X
HPX-30C-AB-T X 2 X X X
HPX-30D-AB-T X 2 X X X
*S = Solder air separator, T = threaded air separator end connections.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 99
 Inlet
Series RPV (3⁄4", 1", 11⁄4")
Residential Purge and Balancing Valves
• Provides a unique and low cost solution for start-up
purging and balancing of hydronic heating loops.
• Rugged, dual-ball valve design
• High-volume purging
RPV
• Accurate balancing and drip tight shutoff
Outlet
Specifications
• 34
⁄ " solder and threaded connections
• 1" and 11⁄4" solder connection Models
• Maximum Working Pressure: 50psi (344 kPa) RPV– with 180° relief port
• Maximum Inlet Temperature: 250°F (121°C) RPV-S-90 – with 90° relief port
For additional information, request literature ES-RPV. RPV-SM-90 – with 90° relief port and
sweat x male connections

Features
• One-piece convenience — no extra assembly required
• Maximum air purging — purges 500 foot loop in 10 seconds
• Positive shutoff dual-ball valve design — drip tight seal on balance port maximizes
effectiveness of purging
• Hose thread connection for purge

MODEL INLET X OUTLET SIZE (DN) DIMENSIONS (APPROX.) WEIGHT C

B C D E
in. mm in. mm in. mm in. mm in. mm lbs. kgs.

RPV-S Solder x Solder 34

⁄ 20 215⁄16 75 23⁄8 60 11 16
⁄ 17 13⁄4 44 1.1 0.5 D
RPV-T FNPT x FNPT 3⁄4 20 215⁄16 75 23⁄8 60 11⁄16 17 13⁄4 44 1.2 0.5 B
RPV-TS FNPT x Solder 3⁄4 20 215⁄16 75 23⁄8 60 11⁄16 17 13⁄4 44 1.2 0.5
RPV-ST Solder x FNPT 3⁄4 20 215⁄16 75 23⁄8 60 11⁄16 17 13⁄4 44 1.2 0.5
RPV-S Solder x Solder 1 25 33⁄4 95 23⁄8 60 7⁄8 22 23⁄8 60 1.2 0.5
RPV-S Solder x Solder 11⁄4 32 41⁄2 114 27⁄8 73 11⁄16 27 27⁄8 73 1.2 0.5 E
10
Hydronics / Steam Heating Products

Model PB56 (3⁄4")

Purge and Balancing Valves
• Designed for exceptionally high capacity purging

Specifications PB56
• Maximum Working Pressure: 50psi (344.8 kPa)
• Maximum Temperature: 250°F (121°C)
• Size 3⁄4" (20mm), inlet x outlet solder connections with 3⁄4" (20mm) male hose thread
connection for blow-off

For additional information, request literature ES-PB-56.

Features
• Self-contained, tight-seating, ball type purge valve
• Hose thread connection for purge
• Balancing adjustment
• Bronze body

100 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series AS, AS-T (1" – 3")
Air Separators for Removing Air from
Water in Hydronic Heating Systems AS-T AS

• Efficient separation of air Specifications AS – Sizes 1", 11⁄ 4" 11⁄ 2", 2", 2 1⁄ 2", 3"
• Heavy cast iron construction • Maximum Working Pressure: 125psi (25 – 80mm), NPT female inlet/outlet con-
• Provides complete, continuous, purging (8.6 bar) nections. With 1⁄8" (3mm) female threaded
and venting of air in the hot water heat- connection for float vent and 1⁄2" (15mm)
• Maximum Temperature: 275°F (135°C) female threaded connection for expansion
ing system when installed in conjunction
with the Watts Model ET expansion tank tank.
and Model FV4 float-vent AS-T – Sizes 1" and 11⁄4" (25 – 32mm),
For additional information,
• AS model includes 1⁄2" tapping for fill request literature S-AS/AST. with 1⁄2" feed water tapping
valve piping

Series AS-B
Bronze Air Separator
Specifications
• Bronze construction • Maximum Working Pressure: 125psi
• Sizes 3⁄4, 1", 11⁄4" (20, 25, 32mm) NPT, (862 kPa)
• Maximum Operating Temperature:
AS-B-T
sweat or threaded inlet/outlet connections
• Standardly furnished with tappings for 275°F (135°C)
boiler fill, expansion tank and air vent Models
For additional information,
• Comes standard with 1⁄2" (15mm) Watts request literature ES-AS-B. AS-B-S – sweat connections
model FV4-M1 float vent to provide
complete, continuous purging and vent- AS-B-T – threaded connections
ing of air in the system

Series DuoVent (1⁄8" – 1⁄4")

High Capacity Air Vent with Manual Vent Feature
Provides automatic air venting for hot or cold water distribution systems. The vent feature
provides tremendous air elimination capability for lightening fast venting of residential and
commercial systems.
The DuoVent valve utilizes a float to actuate the valve plug which is located at the top of
the valve. Once the air is displaced and the system pressure is sustained, the valve plug DuoVent
10
seals and prevents any water from escaping from the system.
Hydronics / Steam Heating Products

The float vent can also operate as an anti-vacuum device since it will permit air to enter the
system when it must be drained.

Specifications Maintenance Features

• Sizes: 1⁄8", 1⁄4" (3, 8mm) NPTF No maintenance is normally necessary. • Body and cover are brass construction
• Maximum Working Temperature: 240°F However, the DuoVent can be disassem- • Air vent with silicone rubber seal
(116°C) bled for inspection or cleaning. • Impurities do not usually affect function-
• Minimum Working Pressure: ing as max. float line of water is always
1.45psi (10 kPa) lower than the valve seal
• Maximum Working Pressure: • Float is high temperature
150psi (10.3 bar) resistant polyethylene
• Suitable for use with glycol systems
For additional information,
request literature ES-DuoVent.
A

MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT C

B
A B C D D1
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
18 5 16 11 16 5 16 5 16
D
DuoVent ⁄ 3 1⁄ 33 3 76 2 ⁄ 68 ⁄ 8 ⁄ 8 4.2 119 D1
DuoVent 1⁄4 8 15⁄16 33 31⁄8 79 211⁄16 68 7⁄16 11 5⁄16 8 4.2 119

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 101
 Series FV-4 (1⁄8" – 1")
Automatic Vent Valve
• Provides automatic air venting for hot or cold water distribution systems
• Purges air that may be in the water system
18 ⁄ " - 1⁄4" (3 – 8mm)
Specifications FV-4M1
• Sizes 1⁄8" – 1" (3 – 25mm) NPTF
• Max. Working Temp.: 240°F (116°C)
• Min. Working Pressure: 1.45psi (10 kPa)
• Max. Working Pressure: 150psi (10.3 bar)
• Float is high temperature
resistant polyethylene For additional information,
• Suitable for use with glycol systems request literature ES-FV4-M1.
12
⁄ " – 1" (15 – 25mm)
FV-4M1

Series P3 (1⁄2")
Multi-orifice Flow Control for Tankless Heaters
• Designed to limit the flow of water to equipment
• Used for tankless heater installations

P3
Specifications
• Maximum Pressure: 150psi (10.3 bar) Size 1⁄2" (15mm), solder connection. Multi-
• Maximum Temperature: 250°F (121°C) orifice cylinder, adjusts to 2.5, 3, 3.5 or 4 For additional information,
gpm (10, 11, 13 or 15 lpm) request literature ES-P3.

Series HAV (1⁄8", 1⁄4")

Automatic Vent for Hot Water Heating Systems
• The HAV valve utilizes moisture retaining discs to control air release. As discs dry they
allow air to escape, when wet they provide positive shutoff
10

• Positive shutoff ball check

• Heat resistant handwheel
• Simple two piece construction HAV
Hydronics / Steam Heating Products

Specifications
• Sizes 1⁄8" (3mm) and 1⁄4" (8mm) • Water Temperature: minimum 140°F
• Working Pressure: minimum 1.45psi (10 (60 °C), maximum 240°F (116 °C)
kPa), maximum 125psi ( 8.6 bar) • Suitable for water only additives: only inhibit- For additional information,
ed glycol based additives are permissible request literature ES-HAV.

102 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series IPF (1⁄2" – 2")
Isolation Pump Flanges for Circulator Pumps
• Fits most circulator pumps
• Advanced double O-ring stem seal technology
• Includes mounting nuts and bolts
• Brass body & flange
• Quarter-turn open and close operation IPF-T
• Available with threaded or solder connections
• Sizes 1⁄2" – 11⁄2" (15 – 40mm) Sweat (IPF-S), 1⁄2" - 2" (15 – 50mm) Threaded (IPF-T)

Specifications
For additional information, request literature
• Maximum working Pressure: 600psi (41.3 bar) WOG ES-IPF

Series PIPF (3⁄4" – 11⁄4")

Isolation Pump Flanges with Purge Port & Swivel Flange
• Ball valve isolation for circulator pumps
• Integral purge port saves time and money compared to purge stations made with
ball valves, boiler drains and copper tees
• Swivel flange allows purge port to be positioned for optimal purging convenience
• Brass body & flange
• Double O-ring stem sealing technology eliminates packing leaks PIPF-T
• Available with threaded or solder end connections
For additional information, request literature
ES-PIPF
Specifications
• Maximum Working Pressure: 400psi (27.6 bar) WOG

10
Hydronics / Steam Heating Products

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 103
 Series 2000-M5 (3⁄4" – 3")
Hydronic Two-way Universal Flow Checks
• For forced hot water heating systems to provide positive gravity shutoff when circulator
is not running
2000-M5
Specifications body construction. Sizes 3⁄4" – 11⁄2" (20 –
• Maximum Working Pressure: 50psi 40mm) have female threaded connections.
(344.8 kPa) for sizes 3⁄4" – 11⁄4" Sizes 2" – 3" (50 – 80mm) have one
(20 – 32mm) flanged outlet x two female threaded con-
nections. One connection can be used for
• Maximum Working Pressure: 125psi (8.6
the installation of an expansion tank when
bar) for 11⁄2" – 3” (40-80mm)
installed at angle check. 2000S-M5
• Maximum Temperature: 250°F (121°C)
2000S-M5 – straight pattern, sizes 3⁄4" – 1"
(20 – 25mm), bronze body construction,
Models solder inlet and outlet connections.
2000-M5 – combines angle and horizontal For additional information,
checks, sizes 3⁄4" – 3" (20 – 80mm), iron request literature ES-2000.

Series G, GH, MG, MGH (1⁄2" – 1")

Thermostatic Steam Traps
• Removes condensate, air and non-condensable gases from heating systems
to conserve steam 1GAP

Specifications Models
• Balanced pressure duplex phosphor G and GH – for low pressure and vacuum
bronze diaphragm sensitive within 3°F heating applications (25" Hg Vacuum to
(-16°C) 25psi)
• Stainless steel valve seat MG and MGH – for medium pressure and
• Diaphragm and seat both replaceable vacuum heating applications (25" Hg For additional information, request
Vacuum to 50psi) literature ES-G/GH/MG/MGH.

Series QF
10

Capsule

Quik-FixTM Radiator Steam

Hydronics / Steam Heating Products

Trap Replacement Kits

QF
• Quick, easy and economical
• Simplifies and standardizes inventory
• Upgrades old radiator traps instantly For additional information,
• Adapts to most existing radiator traps request literature ES-QF.
• Uses existing cover

QUICK, EASY INSTALLATION

1 2 3 Replaceable Integral Seats
Seats

Remove cover of Install seat adapter, Replace original

trap and old trap parts. then snap capsule onto it. cover.

104 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series G, MG (3⁄4" – 2")
Float and Thermostatic Steam Traps
• Fail safe operation – in case of float failure, trap discharges condensate and air
• Air vent parts accessible without disturbing piping
• Straight-through connections save installation time, labor, space, headroom
6G
Specifications Models
• Stainless valve head and seats 6G-15 through 111MG-15 – for steam
• Seamless copper float main drip and process equipment
• Condensate valve rotates to ensure applications (25" Hg to 15psi, 103 kPa)
even wear, longer valve and seat life 7MG-30 through 111MG-30 – for steam
main drip and process equipment
(25" Hg to 30psi, 207 kPa)
6G-50 through 111MG-50 – for steam
main drip and process equipment
applications (25" Hg to 50psi 345 kPa) For additional information,
request literature ES-G/MG.

Series WIB (1⁄2" – 1")

Inverted Bucket Steam Traps
• Designed for reliable condensate removal on virtually all types of steam equipment

Specifications Models
WIB
• Maximum Working Pressure: 250psi (17.2 bar) WIB 80 – 1⁄2"-3⁄4" (15-20mm) for operating
Inverted Bucket Traps have very limited air
• 1⁄2"- 1" (15-25mm) pipe sizes pressures up to 150psi (10.3 bar)
venting capabilities and it is recommended
• Working parts removable without WIB 81 – 1⁄2"-1" (15-25mm) for operating that an auxiliary air vent be utilized if any
disturbing piping pressures up to 250psi (17.2 bar) quantity of air is anticipated.
For additional information,
request literature for ES-WIB.

10
Series WFT
Hydronics / Steam Heating Products

(3⁄4" – 2")
Float & Thermostatic Steam Traps
• Designed to provide continuous air venting and separate condensate draining with maxi-
mum efficiency
• “H” pattern body on all 3⁄4", 1", 11⁄4" (20, 25, 32mm), has been designed to offer
maximum installation flexibility WFT
• Larger sized traps, 11⁄2", 2" (40, 50mm), the inlet and outlet taps are located in the cover,
allowing for the larger capacities needed
• Traps can be serviced without disturbing system piping

Specifications
• Valve and seat combinations 15, 30, 75,
(103, 207, 517 kPa) 125psi (8.6 bar)
differential pressures
• Maximum Working Pressure: 250psi
(17.2 bar) @ 406°F (673°C)
• All stainless steel internal components
• All stainless steel balanced pressure
thermostatic air vent For additional information, request
literature ES-WFT.
• Wide selection 3⁄4" – 2" (20 – 50mm)

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 105
 Series WFTC (3⁄4" – 11⁄4") , WFTK
(11⁄2" – 2")
Float and Thermostatic Steam Trap Cover Assemblies
and Repair Kits
• High quality replacement kits for Spirax Sarco FT series steam traps
WFTC
Models
WFTC – Sizes: 3⁄4" -11⁄4" WFTK – Sizes: 11⁄2" – 2"
(20 – 32mm), cover assembly consisting of (40 – 50mm), complete kit contains a ther-
a complete, factory assembled unit con- mostatic air vent, float, linkage, valve, seat
sisting of cover, cover gasket, condensate and cover gasket. Used for large traps hav-
valve, float, linkage and thermostatic vent ing piping connections into the cover plate. For additional information,
which simply bolts on for ease of repair. No request literature ES-WFTC/WFTK.
pipe connections need to be broken; no
reduction in the trap’s capacity.

Series WTD-600 (3⁄8" – 1")

Thermodynamic Steam Traps
• Designed to drain steam mains, steam tracing lines, and small process
equipment efficiently
• Discharges condensate at near to steam temperature WTD-600

Specifications
WTD-600 – Sizes: 3⁄8" – 1" (10 – 25mm),
NPT female threaded connections
For additional information,
Maximum Working Pressure: 600psi request literature ES-WTD.
(41.3 bar)

Series RA (1⁄2" – 2")

Steam Radiator Valves
• Teflon® stem packing
10

Models RA-1-AP
Hydronics / Steam Heating Products

RA-1-AP – 1⁄2" – 2" (15 – 50mm), angle 14

RA-CV – 1", 1 ⁄ " (25, 32mm), angle con-
valves, bronze body, FIP x male union vector valve, bronze body, female union x For additional information, request literature
connections FIP connections ES-RA-1-AP, ES-RA-1-SW, ES-RA-2-AP,
RA-2-AP – 1⁄2" – 11⁄4" (20 – 32mm), angle RA-1-SW – 1⁄2" – 11⁄2" (15 – 40mm), gate or ES-RA-CV.
valve, brass body, FIP x male union valve with FIP x male union connections
connections

Series SV (1⁄8" – 3⁄4")

Steam Air Vents
• Designed to vent air on non-vacuum steam heating systems
• Used on radiators, convectors, and steam mains

Models
SV – Size: 1⁄8" (3mm) non-adjustable angle SVS-2 – Size: 1⁄4" (8mm), non-adjustable SVA
connection straight connection
SVA – Size: 1⁄8" (3mm), adjustable angle SVS-3 – Size: 3⁄4" male inlet or 1⁄2" female
connection inlet connection (20 or 15mm), non-
SVS-1 – Size: 1⁄8" (3mm), non-adjustable adjustable straight connection
For additional information,
straight connection request literature ES-SV.

106 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series FS10-C, FS-20 (1")
Paddle-type Flow Switches Actuated by Liquid Flow
• For automatic controls or safety devices
• Used to monitor liquid flow in pipelines servicing water and heating systems,
air conditioning and processing installations

Specifications Models FS10-CL

• Maximum Working Pressure: 150psi FS10-C – Size: 1" (25mm), NPT male
(10.3 bar) connection, standard unit.
• Maximum Temperature: 300°F (149°C) FS10-CL – Size: 1" (25mm), NPT male
connection , standard unit with indicator
light.
FS-20 – Nema 4X rated water-tight,
dust-tight and corrosion resistant enclosure
provides an accurate monitoring of flow in
pipelines servicing outdoor or wet applica-
tions. Sizes: 1" (25mm), NPT male connec-
tion. Maximum pressure 150psi (10.3 bar).
Maximum temperature 300°F (149°C). For additional information,
request literature F-FS10C/FS10F/FS20.

Series FS10-F (1")

Water Flow Detectors for Automatic
Fire Protection Sprinkler Service
• UL listed/FM/ULC approved. For use on fire sprinkler branch lines

Specifications Models
• Maximum Working Pressure: 175psi FS-10F/FS-10-FL – Size: 1" (25mm), NPT
(12.1 bar) male connection. For pipe sizes 1", 11⁄4" or
• Maximum Temperature: 300°F (149°C) 11⁄2" (25, 32 or 40mm) using standard
ASTM tees; FL model has indicator light.
• Factory set and sealed for flow rate of
4-10 gpm (15.2-38 LPM)
For additional information,
request literature F-FS10C/FS10F/FS20.
10
Hydronics / Steam Heating Products

Series N50 (1")

Low Water Cut-offs
• Protects hot water heating boilers against emergency low water conditions
• Used on low pressure process boilers
N50

Specifications Models
• Float chamber has 1" (25mm) NPT N50S – Single switch assembly for burner
female top and bottom connections. service with extra terminal for line voltage
single pole, double throw service
N50D – Dual switch assembly for line
voltage burner service and independent
low (or high) voltage alarm, feed valve or
pump starter
For additional information,
request literature IS-N89.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 107
 Series 142, 144 (1⁄2")
Boiler Water Feeders for Process Boilers
• Used on pressing machines and other small process boilers

Specifications Models
• Maximum Steam Pressure: 100psi 142 – Used on pressing machines when
142
(689.5 kPa) feed through float chamber is permissible.
• Maximum Water Pressure: 125psi Direct feed through float chamber.
(8.6 bar) 142S – With strainer.
144 – Water is fed automatically as needed
Note: The water pressure must be at least to maintain the correct water operating
10psi (68.9 kPa) higher than steam pressure.
level in boiler. External water feed connec-
tions. Water feed connection 1⁄2" (15mm)
NPT female. Float chamber connection 1"
(25mm) NPT female.
144S – With strainer.

For additional information,

request literature IS-142.

Series SAN89, SAN50 (1⁄2", 1")

Float and Switch Assemblies for Servicing Low Water Cut-offs
• One piece unit facilitates installation and assures user of the most up-to-date construction

Models SAN89
SAN89D – Complete float and dual switch
assembly. Maximum steam pressure 15psi
(103.4 kPa).
SAN89S – Same as above, but with single
switch assembly for Watts N89S and
N101S.
SAN50D – Complete assembly with dual
switch. Maximum boiler pressure 50psi
10

(344.8 kPa).
SAN50S – Same as above, but furnished
with single switch assembly. For additional information,
Hydronics / Steam Heating Products

request literature IS-N89.

108 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series HBV (1⁄2" – 1")
HBV
Hydronic Balancing Ball Valves
• Used with forced hot water systems

Specifications
• Sizes 1⁄2" – 1" (15 – 25mm), solder x solder
connections For additional information,
• Maximum Working Pressure (non-shock) request literature ES-HBV.
600psi (41.3 bar) WOG

Series HWA ( ⁄ " – 1 ⁄ ") 12 12

Bronze Hot Water Angle Valves

• Used on gravity (hot water) heating systems only

Specifications Models HWA

• Maximum Working Pressure: 60psi HWA – Sizes 1⁄2" – 11⁄4"
(4.2 bar) non-shock for hot water (15 – 32mm), FIP female x threaded male
union. Sizes 1⁄2" & 3⁄4" (15 & 20mm),
bronze body, solder x threaded male
union connections For additional information, request literature
ES-HWA.

Series OTV (1⁄2")

Oil Tank Valves
• Metal to metal seats
• Heavy duty brass construction OTV
• Screwed bonnet
• Rising stem
10
Specifications Models
OTV-FL – Sizes 1⁄2" (15mm) male con- For additional information request literature
Hydronics / Steam Heating Products

• Maximum Working Pressure: WOG

nection x 3⁄8" (10mm) female connection ES-OTV.
125psi (8.6 bar)
OTV-M – Sizes 1⁄2" (15mm) male connec-
tion x 3⁄8" (10mm) male connection

Series UL (1⁄2" – 11⁄4")

Bronze Union Elbows for Steam/Hot Water Systems
• Pressure-tested elbow.
UL-1

Specifications Models
• Working Pressure non-shock saturated UL-1 – Sizes: 1⁄2" – 11⁄4"
steam: 15psi (103.4 kPa), hot water (15 – 32mm), FIP female threaded x
60psi (413.7 kPa) male threaded union
UL-2 – Sizes: 1⁄2" & 3⁄4"
(15 and 20mm), solder x male union
connections For additional information, request literature
ES-UL.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 109
 Series USG-B (3⁄8")
Under Sink Guardian™ Professional
• Designed for the Plumbing Professional for single fixture protection
• ASSE 1016 listed, CSA B-125 Certified
• Heavy-duty brass body with 3⁄8" compression fittings that accommodate the supply lines
used in most kitchen sinks or bathroom lavatories
USG-B-M1
• Quickly installs between stop valves and faucets
Patent# 6,315,209
• Maintain, ±3°F mixed water temperatures up to maximum outlet temperature of 120°F
when limit stop is properly set
• Built-in check valves prevent cross-flow Height
• Integral strainer with 40 mesh stainless steel screens to filter out debris
• Includes tamper resistant locking cap
Specifications (4°C – 29°C)

Width
• Minimum Supply Pressure Required: • Minimum Inlet Temperature Differential:
30psi (207 kPa) 15°F (9°C)
• Minimum Flow Rate Required: 0.5 gpm • Temperature Adjustment Outlet:
(1.9 lpm) Range 80°F – 120°F (27°C – 49°C)
For additional information,
• Hot Inlet Temperature: 120°F – 180°F • Maximum Inlet Temperature: 180°F (82°C)
request literature ES-USG-B.
(49°C – 82°C) • Maximum Working Pressure: 150psi
• Cold Inlet Temperature: 40°F – 85°F (10.3 bar)

MODEL FINISH CONNECTION SIZE HEIGHT WIDTH WEIGHT

in. mm in. mm lbs. kgs.

USG-B-M1 Bronze 38
⁄ " Compression 3 16
5⁄ 132 3⁄18 79 1.5 0.68
USG-B-SC**-M1 Satin Chrome 38
⁄ " Compression 53⁄16 132 31⁄8 79 1.5 0.68
**SC = Satin Chrome finish

Series USG-P
Under Sink Guardian™
• ASSE 1016 listed, CSA B-125 Certified
• Thermoplastic body with 3⁄8" compression fittings that accommodate the supply lines
used in most kitchen and bathroom lavatories
• Quickly installs between stops valves and faucets
• Maintain, ±3°F mixed water temperatures up to maximum outlet temperature of 120°F USG-P-M1
when limit stop is properly set Patent# 6,315,209
• Built-in check valves prevent cross-flow
Height
11

• Integral strainer with 40 mesh stainless steel screens to filter out debris.
• Includes tamper resistant locking cap

Specifications • Minimum Inlet Temperature Differential:

Tempering Valves

Width

15°F (9°C)
• Minimum Supply Pressure: 30psi (207 kPa)
• Temperature Out: 80°F – 120°F
• Hot Inlet Temperature: 120°F – 180°F
(27°C – 49°C)
(49°C-82°C)
• Maximum Working Pressure: 150psi For additional information,
• Cold Inlet Temperature: 40°F – 85°F
(10.3 bar) request literature ES-USG-P.
(4°C-29°C)

MODEL FINISH CONNECTION SIZE HEIGHT WIDTH WEIGHT

in. mm in. mm lbs. kgs.
USG-P-M1 Thermoplastic 38
⁄ " Compression 53⁄16 132 31⁄8 79 1.5 0.68

Also Available:
USG-DP-M1 – Complete installation kit in
display packaging, includes two each of the
following:
• 3⁄8" x 3⁄8" x 12" compression x compression • 9⁄16" x 1⁄2" adapters
flexible braided pvc connectors • Ferrule for use with pex or
• 3⁄8" x 1⁄2" No 66-CP adapters polybutylene supply tubing
USG-DP-M1

110 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series MMV (1⁄2" – 1")
Thermostatic Mixing Valves
• For use in domestic water systems at the point of use to provide accurate outlet
temperature control
• ASSE 1016 listed, ASSE 1017 listed and ASSE 1070 listed, CSA B-125 Certified

Specifications End Connection Options

• Bronze body add Suffix:
• Maximum Temperature: 200ºF (93ºC) UT – union thread connections
• Maximum Working Pressure: 150psi (10.3 bar) US – union solder connections
• Outlet Temperature: Ranges from 80ºF – 120ºF PEX – union PEX connections
MMV-M1
(27ºC – 49ºC) adjustable CPVC – union CPVC connections
For additional information,
request literature ES-MMV.

SIZE (DN) MODEL DIMENSIONS WEIGHT

A
A B C
in. mm in. mm in. mm. in. mm lbs. kgs.
12
⁄ 15 47⁄8 124 57⁄16 137 33⁄16 80 1.5 .68
3⁄4 20 47⁄8 124 57⁄16 137 33⁄16 80 1.6 .73 Hot Cold
MMV-UT-M1
Water B Water
1 32 55⁄16 135 55⁄8 143 33⁄8 86 1.6 .73
1⁄2
Inlet Inlet
15 413⁄16 123 53⁄8 137 31⁄8 80 1.5 .68
3⁄4 20 55⁄16 135 55⁄8 143 33⁄8 86 1.6 .73
MMV-US-M1
C
1 32 513⁄16 148 57⁄8 149 35⁄8 92 1.6 .73
1⁄2 15 51⁄4 133 59⁄16 142 35⁄16 85 1.5 .68
3⁄4 20 51⁄2 140 511⁄16 145 37⁄16 88 1.6 .73
MMV-PEX-M1
Mixed Water
1 32 57⁄8 149 57⁄8 150 35⁄8 93 1.6 .73
Inlet
1⁄2 15 43⁄4 121 55⁄16 136 31⁄16 79 1.5 .68
3⁄4 20 51⁄4 133 59⁄16 142 35⁄16 85 1.6 .73
MMV-CPVC-M1
1 32 511⁄16 144 513⁄16 147 39⁄16 90 1.6 .73

Model L111 (1⁄2")

Thermostatic Mixing Valve
• Maintains desired mixed water temperature at point of use for single showers or lavatories
• ASSE 1016 listed
• Brass body construction with polyetherimide control cartridge and polypropylene
11

tamper-resistant cover to ensure long life

L111
Specifications (shown with CS-U Check Stops Installed)
Tempering Valves

• 1⁄2" (15mm) threaded female inlet and outlet

• Minimum Working Pressure: 15psi (103 kPa)

• Maximum Working Pressure: 125psi (8.6 bar)
• Temperatures for inlets: hot, 120°F to 180°F (49°C – 82°C); cold, 33°F to 85°F (0.5°C – 29°C)
• Minimum Differential Temperature: 10°F (-12°C)
• Outlet Temperature: ranges from 80°F to 120°F (27°C – 49°C); adjustable by contractor;
accurate within ±3°F (±1.7°C)

For additional information, request literature ES-L111.

Options
add Suffix:
CS-U – integral check, strainer, and stop valves. Sizes: 1⁄2", 3⁄4", 1" (15 – 25mm)
B
MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A B D
in. mm in. mm in. mm in. mm lbs. kgs. D
L111 12
⁄ 15 3 76 4 102 11 16
⁄ 175 3.5 1.5 A

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 111
 Series 1170, L1170 (1⁄2" – 1")
Hot Water Temperature Control Valves
• Mixes hot and cold water in domestic hot water systems to reduce temperature of the
hot water supply
• Double throttling design combines control of hot and cold water to provide sensitive
response to changes in water temperature passing through mixing chamber
• Provides additional safety by restricting water flow to a trickle
upon loss of cold water flow
• ASSE 1017 listed, CSA B-125 Certified
1170-M2
Specifications A

• Bronze body
• Maximum Temperature: 200ºF (93ºC)
• Maximum Working Pressure:150psi (10.3 bar)
Hot Water Cold Water
Inlet B Inlet
End Connection Options
add Suffix:
UT – union thread connections C
US – union solder connections
PEX – union PEX connections
CPVC – union CPVC connections Mixed Water
Inlet
Models
1170 - Can be set to any temperature between 90ºF
and 160ºF (32ºC and 71ºC)
L1170 - Low temperature range, can be set to any
temperature between 60ºF and 120ºF
(16ºC and 49ºC)
For additional information,
request literature ES-1170/L1170.

SIZE (DN) MODEL WEIGHT

A B C D
in. mm. in. mm in. mm in. mm lbs. kgs.
12
⁄ 15 47⁄8 124 57⁄16 137 33⁄16 80 1.5 .68
3⁄4 20 1170-UT-M2 47⁄8 124 57⁄16 137 33⁄16 80 1.6 .73
1 25 55⁄16 135 55⁄8 143 33⁄8 86 1.6 .73
1⁄2 15 413⁄16 123 53⁄8 137 31⁄8 80 1.5 .68
11

3⁄4 20 1170-US-M2 55⁄16 135 55⁄8 143 33⁄8 86 1.6 .73

1 25 513⁄16 148 57⁄8 149 35⁄8 92 1.6 .73
1⁄2 15 51⁄4 133 59⁄16 142 35⁄16 85 1.5 .68
3⁄4 20 1170-PEX-M2 51⁄2 140 511⁄16 145 37⁄16 88 1.6 .73
Tempering Valves

1 25 57⁄8 149 57⁄8 150 35⁄8 93 1.6 .73

1⁄2 15 43⁄4 121 55⁄16 136 31⁄16 79 1.5 .68
3⁄4 20 1170-CPVC-M2 51⁄4 133 59⁄16 142 35⁄16 85 1.6 .73
1 25 511⁄16 144 513⁄16 147 39⁄16 90 1.6 .73

112 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 70A (1⁄2")
Hot water extender tempering valves
• For residential installations, mixes cold and hot water to extend capacity of water heater,
storage tanks and hot water boiler tankless heaters

Models
70A-F – Sizes 1⁄2" (15mm), solder connec- L70A-F – Sizes 1⁄2" (15mm),
tions, temperature range solder connections, temperature range
70A
120° – 160°F (49° – 71°C) 100° – 130°F (38° – 54°C)
70A-T – Sizes 1⁄2" (15mm), NPT female L70A-T – Sizes 1⁄2" (15mm), NPT female
connections, temperature range connections, temperature range Features
120° – 160°F (49° – 71°C) 100° – 130°F (38° – 54°C) • All brass or bronze construction
70A – Sizes 3⁄4" (20mm), solder L70A – Sizes 3⁄4" (20mm), • Adjustable knob for temperature control
connections, temperature range solder connections, temperature range • High capacity
120° – 160°F (49° – 71°C) 100° – 130°F (38° – 54°C)
• Low pressure drop
70A-T – Sizes 3⁄4" (20mm), NPT female L70A-T – Sizes 3⁄4" (20mm), NPT female
connections, temperature range connections, temperature range For additional information,
120° – 160°F (49° – 71°C) 100° – 130°F (38° – 54°C) request literature ES-70A.

A
MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A C D D1 E
C
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
70A-F 12
⁄ 15 2 50 23⁄4 70 1 25 13⁄8 41 13 16
⁄ 21 0.68 .30
70A-T 12
⁄ 15 23⁄4 70 23⁄4 70 15⁄8 41 13⁄8 41 13 16
⁄ 21 1.30 .59
70A 3⁄4 20 23⁄4 70 23⁄4 70 13⁄8 41 13⁄8 41 13⁄16 21 0.96 .44
3⁄4 D
70A-T 20 23⁄4 70 23⁄4 70 13⁄8 41 13⁄8 41 13⁄16 21 1.20 .54
L70A-F 1⁄2 15 2 50 23⁄4 70 1 25 13⁄8 41 13⁄16 21 0.60 .29 D1
L70A-T 1⁄2 15 23⁄4 70 23⁄4 70 15⁄8 41 13⁄8 41 13⁄16 21 1.30 .59
L70A 3⁄4 20 23⁄4 70 23⁄4 70 13⁄8 41 13⁄8 41 13⁄16 21 0.96 .44 E
L70A-T 3⁄4 20 23⁄4 70 23⁄4 70 13⁄8 41 13⁄8 41 13⁄16 21 1.20 .54

Series N170 (3⁄4" – 2")

Hot water extender tempering valves
• For commercial applications, mixes cold and hot water to extend capacity of water
heater, storage tanks and hot water boiler tankless heaters

Specifications Models
11

• Maximum Working Pressure: 150psi N170 – Sizes 3⁄4" – 2" (20 – 50mm), NPT
(10.3 bar) female threaded connections, temperature
Options N170
Tempering Valves

• Maximum Working Temperature: range 130° – 180°F (54° – 82°C)

210°F (99°C) N170L – Sizes: 3⁄4" – 2" (20 – 50mm), NPT HT – for high temperature hot water
female threaded connection, temperature supply applications
range 100° – 130°F (38° – 54°C)
For additional information,
request literature ES-N170. Features
MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT • Static adjustment screw seal
A B D
• All bronze construction
in. mm in. mm in. mm in. mm lbs. kgs. • Interchangeable
34
thermostat
N170-M2 ⁄ 20 41⁄8 105 91⁄4 235 2 50 5.2 2.4
N170-M2 1 25 43⁄4 114 91⁄4 235 2 50 5 2.3 • High capacity
N170-M2 11⁄4 32 6 150 97⁄8 251 2 50 8.7 3.9 • Low pressure drop
N170-M2 11⁄2 40 6 150 97⁄8 251 21⁄8 54 8.3 3.8
N170-M2 2 50 63⁄8 162 97⁄8 251 21⁄8 54 9.8 4.4 B
N170L-M2 3⁄4 20 41⁄8 105 91⁄4 235 2 50 5.2 2.4
N170L-M2 1 25 41⁄2 114 91⁄4 235 2 50 5 2.3
N170L-M2 11⁄4 32 6 150 97⁄8 251 2 50 8.7 3.9
N170L-M2 11⁄2 40 6 150 97⁄8 251 21⁄8 54 8.3 3.8 D
N170L-M2 2 50 63⁄8 162 97⁄8 251 21⁄8 54 9.8 4.4
A
For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 113
 Straight Models
Series 05 (3⁄8" – 3⁄4") MODEL SIZE (DN) CONNECTION TYPE

Mini Water Hammer Arrestors in mm

05 3⁄8 10 NPT
• Controls water hammer 05 1⁄2 15 NPT
1⁄2
• Residential and light commercial applications 05-CPVC 15 CPVC
05-H 3⁄4 20 Hose
Specifications 05H-M1 3⁄4 20 Hose
05-S 1⁄2 15 Sweat
Sizes 3⁄8" – 3⁄4" (10 – 20mm). 3⁄4
05-S 20 Sweat
Maximum Working Pressure: 150psi 5⁄8
05-C 16 OD Comp. 05H-M1 05C 05H
(10.3 bar).
Temperature Range: 33° – 180°F Tee Models
(0.5° – 82°C) MODEL SIZE (DN) CONNECTION TYPE Features
in mm • May be installed in concealed location
Standards 05-C-T 14
⁄ 8 OD Comp. with access panels
05-C-T 3⁄8 10 OD Comp.
ASSE 1010 and IAPMO listed • Factory air-charged, not rechargeable
05-CXT 3⁄8 10 OD Comp. x • Installed with standard pipe tee at any angle
Reverse Comp. Nut
05-CXT 58
⁄ 16 OD Comp. x For additional information, request literature
Reverse Comp. Nut ES-05.
05-PEX-T 38
⁄ 10 PEX
05-PEX-T 12
⁄ 15 PEX

Series 15 (1⁄2" – 2")

Water Hammer Arrestors
• Controls water hammer
• Commercial and industrial applications

Features
• 150psi (10.3 bar) operating pressure • NPT solid hex brass adapter
• Copper body • May be installed in concealed locations
• EPDM seals and O-rings • Factory air charged, permanently
• Brass piston and cap capped and epoxy sealed 15
• Installed at any angle • No. 15AK adapter for installing 11⁄4", Standards
• Pre-charged air chamber 11⁄2", and 2" (32, 40, 50mm) sizes in a ASSE 1010 and ANSI 112.26.1M
1" (25mm) NPT fitting approved, PDI WH201 approved and
certified, Listed by IAPMO
CONNECTIONS AIR PRELOAD CROSS REF. FIXTURES
NPT mm psi kPa PDI Standard Units
12
⁄" 15 60 413.7 A 1-11
34
⁄" 20 60 413.7 B 12-32
1" 25 60 413.7 C 33-60
11⁄4" 32 60 413.7 D 61-113
For additional information,
12

11⁄2" 40 60 413.7 E 114-154 request literature ES-15.

2" 50 60 413.7 F 155-330
Plumbing Specialties

Series 150A (1⁄2" – 3⁄4")

Water Hammer Arrestors
• Controls water hammer
150HA
Specifications Models Features
• Maximum Working Pressure: 150psi 150A – Size 1⁄2" (15mm) • Pre-charged air chamber
(10.3 bar) 150A-HA – Size 3⁄4" (20mm), • Sealed-in diaphragm
• Maximum Velocity: 10 fps. Maximum with hose threaded connection for
• Rechargeable
• Shock Pressure: 200psi (13.8 bar) washing machines
For additional information, request
literature ES-150A.
114 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series DWB
DuoClozure™ Wall Box (1⁄2")
Includes Watts Series 2-M2 Washing Machine shutoff Valve
• Features a decorative white faceplate which can be painted or papered to match wall deco
DWB
• Used to manually eliminate water pressure on supply hoses and prevent catastrophic
water damage
• Connects to 11⁄2" or 2" drain piping
• Side or top water supply piping
• Supplied with water pressure test plugs

Specifications Features Models

Maximum Working Pressure: 150psi • Decorative look and the convenience of 2M2 DWB – Size 1⁄2" (15mm) ell solder
(10.3 bar) the Watts Duo-Cloz™ valve in one connections for concealed piping
Maximum Working Temperature: complete package 2M2 DWB Rough-In Kit – Contains
180°F (82°C) • Easy to install. Complete with components to rough-in and test piping
adjustable stud mounting brackets and drain system
• Supplied with water pressure test plugs 2M2 DWB-Finish Kit Contains the
Series 2-M2 Duo-Cloz washing machine
water shutoff valve and finish trim

For additional information,

request literature PG-LR.

TM
Series A2C, IntelliFlow (1⁄2")
Automatic Washing Machine Shutoff Valve
• Automatically closes water supply valves when washing machine shuts off thus virtually
eliminating water pressure on the supply hoses when machine is not in use; prevents
disastrous flooding from burst hoses
• Allows hot and cold water to flow through the washing machine supply
hoses to the appliance A2C-M1

Models Features
A2C-M1 – Size: 1⁄2" (15mm), connections • Replaceable seats and internal strainer
• Includes A2-LS leak sensor • Ease of installation
A2CWB-M1 – Size: 1⁄2" (15mm), includes • Includes leak sensor
recessed wall box
A2-LS
• Maximum Pressure: 150psi (10.3 bar)
• Maximum Temperature: 180°F (82°C)
12

• Includes A2-LS leak sensor

KA2-A – Size 1⁄2" (15mm) Installation Kit
KA2-R- Size 1⁄2" (15mm) Installation Kit
Plumbing Specialties

KA2C-BD- Size 1⁄2" (15mm) Installation Kit

A2-LS- Leak sensor
A2-IntelliTimer- Used in conjunction with A2-Intellitimer
Watts Intelliflow in 220 VAC power
applications. (Purchased separately)
For additional information,
request literature F-IntelliFlow.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 115
 Series 2 (1⁄2")
Duo-Cloz™ Washing Machine Water Shutoff Valve
• Manual valve eliminates water pressure on supply hoses and prevents
catastrophic water damage
• Controls both hot and cold water simultaneously
2-M2
Specifications Models
Maximum Pressure: 150psi (10.3 bar) 2-M2SC – Satin chrome finish Features
Maximum Temperature: 180°F (82°C) 2T-M2, 2T-M2SC – Size 1⁄2" (15mm) • Single lever on-off
threaded and solder copper dual adapter • Bronze body construction
with two-way male connectors • May be used with Model 05H and Model
150A-HA water hammer arrestors

For additional information,

request literature ES-2-M2.

Series APU
SpringFit Access Panels
• Conceals plumbing, wires, cables and spa pumps
• Two sizes 9”x 9” or 15” x 15” to fit any size shape hole from 5”x 6” to 15” x 15”
• No exact measurements required
• Can be painted or wallpapered

APU
For additional information,
request literature ES-SpringFit.
12
Plumbing Specialties

116 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series A200 (1⁄2")
“Flow Through” Trap Primers
• Assures delivery of water to floor drain traps to prevent evaporation of the water seal

Models Features
A200T – Size: 1⁄2" (15mm), • Complete flow cycle operates valve twice
threaded ends A200
• Built-in air gap
A200S – Size: 1⁄2" (15mm), • Bronze body For additional information,
solder ends
• Celcon® seat and disc request literature ES-A200.

Series F1131 (1⁄2")

Gas Log Lighter Valves
• Designed to provide the safety and control of a manual key operated, positive shutoff,
multi-turn globe valve for gas fireplaces
• Multi-turn globe style design
• Available in polished brass or chrome finish
• Available in angle or straight pattern F1131
• Key included

Specifications
• Brass body construction
• Teflon® seat packing For additional information,
• Zinc alloy escutcheon tubes request literature ES-F1131.

Series BD (1⁄2" x 3⁄4", 3⁄4" x 3⁄4")

Brass Boiler Drain Shutoffs for Water Service
• 3⁄4" (20mm) Hose thread connection on outlet
• Dual solder or IP connection models
• Angle and straight pattern models BD-1C

Specifications
• Maximum Working Pressure: 200psi
(13.8 bar) WOG
• Maximum Working Temperature:
12

180°F (82°C)

Models
Plumbing Specialties

BD1C – Size 1⁄2" (15mm) dual connection, BD4F – Size: 3⁄4" (20mm) female IPS x 3⁄4"
solder or male IPS x 3⁄4" (20mm) hose (20mm) hose thread connection,
thread connection, angle pattern angle pattern
BD2 – Size 3⁄4" (20mm) male IPS x 3⁄4" BD5 – Size: 1⁄2" (15mm) straight pattern,
(20mm) hose thread connection, solder or male IPS x 3⁄4" (20mm) hose
angle pattern thread connection
BD2C – Size: 3⁄4" (20mm) male IPS x 3⁄4" BD6 – Size: 3⁄4" (20mm) straight pattern,
(20mm) hose thread connection, male IPS x 3⁄4" (20mm) hose thread
angle pattern connection For additional information,
BD3F – Size: 1⁄2" (15mm) female IPS x 3⁄4" request literature ES-BD.
(20mm) hose thread connection,
angle pattern

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 117
 Series BD-QT (1⁄2" x 3⁄4") (3⁄4" x 3⁄4")
Quarter-turn Brass Boiler Drain Shutoffs for Water Service
• Designed to provide the speed and convenience of quarter-turn ball valve performance
for boiler drain or sill cock applications
34
⁄ " BD-QT
Specifications Features
• Maximum Working Pressure: 200psi • 3⁄4" (20mm) Hose thread connection
(13.8 bar) WOG on outlet
• Maximum Temperature: • Available 3⁄4" x 3⁄4" (20 x 20mm) MIP or
250°F (121°C) Solder
• Positive shutoff
• Quarter-turn ball valve design
For additional information,
• Rugged aluminum Tee-handle design request literature ES-BD-QT.
• Adjustable Teflon® stem packing

Series FH, FHB (1⁄2" x 1⁄2", 3⁄4" x 1⁄2", 3⁄4" x 3⁄4")

Frost-proof Automatic Draining Wall Hydrants
FHB
• Designed to provide freeze protection for external water supply
• 3⁄4" (20mm) hose outlet provided with FH and FHB models
• FHB Series designed with backflow preventer to prevent contamination of the potable
water supply from either backsiphonage or backpressure
• Residential and light commercial applications FHB-1-PEX

Models Features
FH-1-M1 – Sizes: 4" – 14" • Self-drains automatically
(100 – 350mm), 1⁄2" (15mm) copper or 1⁄2" • Positive seat water shutoff
(15mm) male IPS inlet • ASSE 1019 approved FHB models only
FH-2-M1 – Sizes: 4" – 14"
(100 – 350mm), 3⁄4" (20mm) male IPS or
1⁄2" (15mm) female IPS inlet

FHB-1 – For wall sizes: 4" – 14"

(100 – 350mm), 1⁄2" (15mm) copper or
1⁄2" (15mm) male IPS inlet

FHB-1-PEX – Sizes: 4" – 14"

(100 – 350mm), 1⁄2" (15mm) PEX inlet
FHB-2 – For wall sizes: 4" – 14"
(100 – 350mm), 3⁄4" (20mm) male IPS
or 1⁄2" (15mm) female IPS inlet
For additional information,
FHB-23⁄4 – For wall sizes: 12" (300mm), 3⁄4"
request literature ES-FH or ES-FHB.
(20mm) copper inlet or 3⁄4" (20mm) male IPS
12

Series HY42
Plumbing Specialties

Frost-proof Wall Hydrant with Backflow Preventer

• Automatic draining wall hydrant designed to blend with modern architecture
• Commercial and industrial applications

Models Features HY42

HY42 – Wall thickness sizes: 21⁄2" – 18" • Brass valve body
(65 – 450mm), 1" (25mm) male IPS or 3⁄4" • Replaceable EPDM seat surface
(20mm) female IPS inlet connections • One piece valve plunger that controls
flow and drainage
• Tamper-resistant tee key operates hydrant HY42 Box – mounting box available
• Brass pipe casing For additional information,
• Chrome on brass exterior finish request literature ES-HY42.

118 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series SC, SC8 (1⁄2", 3⁄4")
Sill Cock Faucets SC8-2
• Hose bibb type faucets with tee handle or handwheel
SC-1
Specifications
• Maximum Working Pressure: 125psi (8.6 bar) CWP.
Models
Tee Handle Sillcock
SC-1 – Size: 1⁄2" (15mm) no kink hose faucet dual inlet connection
SC8-4
(male IPS or solder) SC-3
SC8-1 – Same as SC-1, except with vacuum breaker
SC-2 – Size: 3⁄4" (20mm) no kink hose solder connection x 3⁄4"
(20mm) hose connection
SC8-2 – Same as SC-2, except with vacuum breaker

Lawn Faucet Sillcock with Cast Iron Handwheel SC8-5

SC-3 – Size: 1⁄2" or 3⁄4" (15 or 20mm), solder connection x 3⁄4" (20mm) hose end SC-6
SC8-3 – Same as SC-3, except with vacuum breaker
SC-4 – Size: 1⁄2" or 3⁄4" (15 or 20mm), female IPS inlet connection x 3⁄4"
(20mm) hose
SC8-4 – Same as SC-4, except with vacuum breaker

Hose Bibb Hex Shoulder Sillcock with Tee Handle

SC-5 – Size: 1⁄2" (15mm) male IPS or solder inlet connection x 3⁄4" (20mm)
hose
For additional information,
SC8-5 – Same as SC-5, except with vacuum breaker request literature ES-SC or ES-SC8.
SC-6 – Size: 3⁄4" (20mm) male IPS 3⁄4" (20mm) hose connections
SC8-6 – Same as SC-6, except with vacuum breaker

Series MHB-RC ( ⁄ " NPT x 12 34

⁄ " Garden Hose)
Hose Bibb Vacuum Breakers
• Integral vacuum breaker for backflow protection of potable water supply
• Rough chrome plated brass body
• Removable polycarbonate handle converts to loose key design with lock shield

MHB-RC
12
Plumbing Specialties

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 119
 Series SW, SS (3⁄8" – 3⁄4")
Stop and Waste Shutoff Valves
• Available as stop and waste shutoffs or for shutoff only service

Specifications Models SWC

• Maximum Working Pressure: 150psi SWS – Sizes: 3⁄8", 1⁄2", 3⁄4" (10, 15, 20mm)
(10.3 bar) WOG solder connections
• Maximum Temperature: 80°F (27°C) SWC – Sizes: 1⁄2", 3⁄4" (15, 20mm) com-
Stop and waste valves pression ends
SWT – Sizes: 1⁄2", 3⁄4" (15, 20mm) NPT
female connections
Stop only valves
SS – Sizes: 1⁄2", 3⁄4" (15, 20mm) solder
connections
SSC – Sizes: 1⁄2", 3⁄4" (15, 20mm) com-
pression ends
ST – Sizes: 1⁄2", 3⁄4" (15, 20mm) NPT
female connections
ST-C – Sizes: 1⁄2", 3⁄4" (15, 20mm) NPT For additional information, request literature
female connections with cross style handle ES-SS or ES-SW.

Series WAMV (3⁄4" x 3⁄4", 1" x 3⁄4")

Brass Angle Meter Valves
• For residential or light commercial incoming water supply service

WAMV
Models Features
WAMV – Size 3⁄4" flare x 3⁄4" female IPS • Cast brass
(20 x 20mm) connections. Size 1" flare x • With or without waste feature
3⁄4" female IPS (25 x 20mm) connections

WAMV-W – Size: 3⁄4" flare x 3⁄4" female IPS

(20 x 20mm) connections with waste
feature
WAMV-W – Size: 1" flare x 3⁄4" female IPS
(25 x 20mm) connections with waste feature. For additional information,
Maximum pressure 125psi (9 bar) request literature ES-WAMV.
12
Plumbing Specialties

Series WAS (1⁄2")

Anti-sweat Valve for Water Closets
• Mixes hot water with cold supply water to avoid condensation build up on the outside of
the water closet WAS

Specifications Models
• Maximum Temperature: 180°F (82°C) WAS – Size 1⁄2" (15mm), compression For additional information,
ends or IPS male connections request literature ES-WAS.

120 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 375, 500, 750, 1000, 1250,
1500, 2000 ( ⁄ " – 2") 38

Heavy Duty Mechanical Float Valves for Controlling Water Flow

• Pipe-threaded for pipe connections and Non-Threaded Outlet – High capacity
straight-pipe threaded for locknut valve that can be tank wall-mounted. Inlet 500
• Machined flange for support against side has a machined flange and is female
tank wall NPT pipe threaded for inlet connection and
• All bronze body construction male straight-pipe threaded for locknut
• Serrated arms for quick easy adjustment Threaded Outlet (500TO, 750TO) – High
of water level capacity valve with same inlet feature as
standard valve, with MNPT thread on the
• High tensile manganese bronze long outlet. Like the standard valves, this valve
and short arms can be tank wall-mounted.
• No jam single lever action Maximum Pressure: 165psi (11.4 bar) 500TO
• Replaceable seals Maximum Temperature: 180°F (82°C) For additional information,
request literature F-FV.

Heavy Duty Floats

Copper Plastic
(CX, C4 through C8, C10 and C12) (PX, P1, P6 through P8, P12 and P16)
CX
• High grade copper construction • Non-electrolytic, highly corrosion resistant
• Firmly bonded overlapping joints • Unaffected by salts and caustic fluids
(lead free solder) • All injection molded
• Maximum Temperature: 200°F (93°C) • Maximum Temperature: 140°F (60°C)

PX
For additional information,
request literature F-FV.

Series ST375, ST500, ST750, ST1000,

ST1250, ST1500, ST2000 ( ⁄ " – 2") 38
12

Standard Duty Mechanical Float Valves ST-1500

for Controlling Water Flow
Plumbing Specialties

• No jam single lever action

• Replaceable seals.
• Cotter pin pivot arm assembly
• Replaceable plungers
• Maximum Working Pressure: 125psi (8.6 bar) ST-750
• Maximum Temperature: 180°F (82°C)
• 3⁄8" – 1" (10 – 25) – Bronze body with MNPT

threaded inlet and outlet

• 11⁄4" – 2" (32 – 50mm) – Bronze body with For additional information,
female NPT inlet-open outlet request literature F-FV.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 121
 Heavy Duty Cooler Valves
Bronze Body
STD-CA
Specifications Model
• Machined in-seat STD-CA – 3⁄8" (10mm) MIP OD x 1⁄8"
(3mm) FIP ID pipe connection
• Buna N seals
C3⁄8TF – 3⁄8" (10mm) copper tube compres-
• Adjustable brass arms sion inlet connection
• Polyethylene float C1⁄4TF-1 – 1⁄4" (8mm) copper tube com-
• Maximum Working Pressure: 100psi pression inlet connection
(6.7 bar) C1⁄4TFAEA – 1⁄4" (8mm) copper tube com- For additional information,
• Maximum Temperature: 140°F (60°C) pression inlet connection request literature F-FV.

Tube Fitting Mini Cooler Valves

Brass Body
M1⁄4"FSS
• Machined in-seat Models
• Buna-N seals M1⁄4TF – 1⁄4" (8mm) copper tube compres-
• Adjustable brass arms sion inlet connection
• Polyethylene float M1⁄4TFSS – 1⁄4" (8mm) copper tube com- For additional information,
pression inlet connection request literature F-FV.

RL600
Automatic Livestock Watering Kits
• 11⁄4" (32mm) MNPT threaded with 1⁄2" Features
(15mm) FNPT threaded inlet.
• High capacity
• Consists of RL600V nozzle and arm
• Easy installations
assembly, RL600SC stem and chain
assembly and P6 float. For use on • Animal proof
Rubbermaid® brand livestock tanks. • Resist freezing
• RL600 plus universal tank adapter (No. • Durable
UA600) for use in all livestock tanks.
RL600

For additional information,

request literature F-FV.
12
Plumbing Specialties

122 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series 3000 (1⁄2" – 4")
Dielectric Unions/Fittings
• Protects against destructive effect of galvanic and stray current corrosion
• For residential, commercial and industrial applications
3002
Specifications
• Supplied with GA gaskets suitable for water, air, oil, natural gas, gasoline, propane,
kerosene, mineral oil and alkalies. For other applications, consult factory
• Dielectric Unions are rated to 180°F (82°C) at 250psi (17.2 bar) conforming to ANSI
B16.39. Pipe threads are in accordance with ANSI B2.1
• Dielectric Flange Fittings are rated at 175psi (12.1 bar) conforming to B16.42 (iron),
B16.24 (bronze)

Standards
Unions meet the requirements of ANSI B16.39, including hydrostatic strength, tensile 3100
strength and air pressure testing.
Flange fittings conform to B16.42 (iron), B16.24 (bronze).
All pipe threads are in accordance with ANSI B2.1 and solder joints meet national plumb-
ing standards.
Gray Iron. . . . . . . . . . . . . . . . . . . . . . . ASTM A48-83
Malleable Iron Parts . . . . . . . . . . . . . . ASTM A197-79
Steel Parts . . . . . . . . . . . . . . . . . . . . . ASTM A108
Brass Parts. . . . . . . . . . . . . . . . . . . . . ASTM B16
Bronze Parts. . . . . . . . . . . . . . . . . . . . ASTM B584
Zinc Parts . . . . . . . . . . . . . . . . . . . . . . ASTM B633-85
Insulators . . . . . . . . . . . . . . . . . . . . . . Watts #1425
Optional Gasket
Standard Gasket A . . . . . . . . . . . . . . . Buna
add Suffix:
GB – EPDM gasket for use in steam or hot
Models water applications up to 300°F (149°C) at
3001A – Sizes 1⁄2" – 2" (15 – 50mm), female iron pipe thread to 50psi (3.4 bar)
solder connection
3002 – Sizes 1⁄2" x 3⁄8", 3⁄4" x 1⁄2", 1" x 3⁄4" (15 x 10, 20 x 15, 25 x 20mm),
female iron pipe thread to reduced solder connection.
Features
3003 – Sizes 1⁄2" – 2" (15 – 50mm), female iron pipe thread to female • Meets federal specifications for
brass pipe both tensile strength and thread
3004 – Sizes 1⁄2" – 2" (15 – 50mm), female iron pipe thread to female end connections
iron pipe thread (galvanized) • All dielectric unions individually
3005A – Sizes 1⁄2" – 3⁄4" (15 – 20mm), male iron pipe thread to solder factory certified to withstand a
connection minimum of 600 volts on a dry line
3006 – Sizes 1⁄2" – 2" (15 – 50mm), female iron pipe thread to female with no flashover
iron pipe thread (black) • Watts dielectric fittings/unions are
3007 – Sizes 1⁄2" x 3⁄8" – 3⁄4" x 1⁄2" (15 x 10mm – 20 x 15mm), male iron designed and manufactured to the
pipe thread to female solder connection highest quality standards
3008 – Sizes 1⁄2" – 1" (15 – 25mm), female brass pipe thread to female
solder connection.
Flanged Fittings
13

3100 – Sizes 2" – 4" (50 – 100mm), iron pipe thread to copper solder joint
3110 – Sizes 21⁄2" – 4" (65 – 100mm), solder copper fitting, bronze
Dielectric Unions

(125 class flange)

Bolt Insulators –
3200 – Sizes 2" – 4" (50 – 100mm), iron pipe thread to iron pipe thread
for insulating flange bolts –
Installation Kit
For additional information, request literature F-3000.
BOLT SIZE QTY./CARTON WEIGHT
in. mm lbs. kgs.
12⁄ 15 100 1.75 .8
5 ⁄8 16 100 1.75 .8
3 ⁄4 20 100 2 .9
7 ⁄8 22 100 2 .9

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 123
 MODEL SIZE (DN) DIMENSIONS (APPROX.) WEIGHT
A B B
in. mm in. mm in. mm oz. gm.
3001A 12
⁄ 15 11⁄2 32 17⁄8 48 6.0 170
3001A 34
⁄ 20 15⁄8 41 21⁄8 54 6.7 190
3001A 1 25 17⁄8 48 21⁄2 64 9.3 264
3001A 11⁄4 32 21⁄4 57 3 76 13.3 377
3001A 11⁄2 40 23⁄4 70 3 76 13.3 377 A
3001A 2 50 31⁄2 89 3 76 34.7 984
3002 1⁄2 x 3⁄8 15x10 11⁄2 38 17⁄8 48 6.7 190
3002 3⁄4 x 1⁄2 20x15 15⁄8 41 17⁄8 48 6.7 190
3002 1x 3⁄4 25x20 17⁄8 48 21⁄2 64 10.7 303
3003 1⁄2 15 15⁄8 41 21⁄4 57 6.7 190
3003 3⁄4 20 17⁄8 48 21⁄4 57 14.7 417
3003 1 25 21⁄4 57 21⁄2 64 20.0 567
3003 11⁄4 32 23⁄4 70 23⁄4 70 26.7 757
3003 11⁄2 40 31⁄2 89 23⁄4 70 48.0 1366
3003 2 50 41⁄8 105 31⁄8 79 69.3 1965
3004 1⁄2 15 15⁄8 41 21⁄4 57 6.7 190
3004 3⁄4 20 17⁄8 48 21⁄4 57 14.7 417
3004 1 25 21⁄4 57 21⁄2 64 20.0 567
3004 11⁄4 32 23⁄4 70 23⁄4 70 26.7 757
3004 11⁄2 40 31⁄2 89 23⁄4 70 45.0 1276
3004 2 50 41⁄8 105 31⁄8 79 8.7 247
3005A 1⁄2 15 11⁄2 38 25⁄8 67 8.6 244
3005A 3⁄4 20 15⁄8 41 3 76 12.6 377
3006 1⁄2 15 15⁄8 41 21⁄4 57 6.7 190
3006 3⁄4 20 17⁄8 48 21⁄4 57 14.7 417
3006 1 25 21⁄4 58 21⁄2 64 20.0 567
3006 11⁄4 32 23⁄4 70 23⁄4 70 26.7 757
3006 11⁄2 40 31⁄2 89 23⁄4 70 45.3 1284
3006 2 50 41⁄8 105 31⁄8 79 64.0 1814
3007 1⁄2 x 3⁄8 15x10 11⁄2 38 25⁄8 67 6.7 190
3007 3⁄4 x 1⁄2 20x15 15⁄8 41 3 76 6.7 190
3008 1⁄2 15 11⁄2 38 17⁄8 48 6.7 190
3008 3⁄4 20 15⁄8 41 21⁄8 54 10.7 303
3008 1 25 17⁄8 48 21⁄2 64 14.7 417
FLANGED FITTINGS

3100 2 50 51⁄8 130 31⁄4 83 128 3629

3100 21⁄2 65 57⁄8 149 31⁄2 89 192 5443
3100 3 80 63⁄4 171 33⁄4 95 224 6350
3100 4 100 91⁄8 232 43⁄8 111 480 13608
3110 21⁄2 65 57⁄8 149 31⁄2 89 192 5443
3110 3 80 63⁄4 171 33⁄4 95 240 6804
3110 4 100 91⁄8 232 43⁄8 111 288 8165
13

3110LF 21⁄2 65 57⁄8 149 31⁄2 89 96 44

3110LF 3 80 63⁄4 171 31⁄2 89 120 54
3110LF 4 100 91⁄8 232 43⁄8 111 144 65
Dielectric Unions

3200 2 50 51⁄8 130 21⁄8 54 128 3629

3200 21⁄2 65 57⁄8 149 23⁄4 70 192 5443
3200 3 80 63⁄4 171 23⁄4 70 240 6804
3200 4 100 91⁄8 232 3 76 496 14062

124 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series FS-CDC-S (3⁄8" – 1⁄2")
FloodSafe™ Braided Stainless Steel
Dishwasher Connectors FS-CDC-S-FE

• FloodSafe™ shutoff device protects against catastrophic water damage

• Patented design
• Requires no power source Maximum Pressure: 125psi (8.6 bar)
• Supplied with elbow fittings Maximum Temperature:180°F (82°C)
• PVC tubing jacketed with braided stainless steel Note: National residential plumbing codes
• Superior resistance to chlorinated water reference the maximum operating tempera-
• Available lengths: 48", 60", 72" ture as 140°F (60°C). Plumbing fixtures are
designed to ANSI-ASME A112 18.1 at
Models 125psi (8.6 bar). For other applications
requiring higher operating temperatures or
FS-CDC-S-CE – Size: 3⁄8" (10mm) brass FS-CDC-S-FE – Size: 1⁄2" (15mm) brass nut pressures, please contact Watts Regulator
nut compression end fitting x 3⁄8" (10mm) female iron pipe (FIP) thread connector x 3⁄8" Technical Service at (978) 689-6130.
compression end fitting with a brass male (10mm) compression end fitting with a brass
iron pipe thread elbow attached to the male iron pipe thread elbow attached to the For additional information,
compression end fitting compression end fitting request literature ES-FS-CDC-S.

Series FS-CFC-S (3⁄8" – 1⁄2")

FloodSafe™ Braided Stainless Steel
Faucet Connectors FS-CFC-S-CC
• FloodSafe™ shutoff device protects against catastrophic water damage
• Patented design Delta Style Faucet Connector:
• Requires no power source FS-CFC-S-CO – Size: 3⁄8" (10mm) brass
compression end fitting x 3⁄8" (10mm) brass
• PVC tubing jacketed with braided stainless steel
OD compression end fitting
• Superior resistance to vibration and bursting
Maximum Pressure: 125psi (8.6 bar)
• Available lengths: 12", 16", 20"
Maximum Temperature:180°F (82°C)
Models All hoses are NSF61 approved for safer
drinking water.
FS-CFC-S-CC – Size: 3⁄8" x 3⁄8" (10 x 10mm) FS-CFC-S-FF – Size: 1⁄2" x 1⁄2" (15 x
brass nut compression end fittings 15mm) brass FIP thread fittings Note: National residential plumbing codes
FS-CFC-S-CF – Size: 1⁄2" (15mm) brass FS-CFC-S-TF – Size: 1⁄2" (15mm) brass reference the maximum operating temper-
compression end fitting x 1⁄2" (15mm) brass fine thread female end x 1⁄2" (15mm) brass ature as 140°F (60°C). Plumbing fixtures
female iron pipe (FIP) thread fitting FIP thread fitting are designed to ANSI-ASME A112 18.1 at
125psi (8.6 bar). For other applications
FS-CFC-S-CF – Size: 3⁄8" (10mm) brass FS-CFC-S-TF – Size: 3⁄8" (10mm) brass requiring higher operating temperatures or
compression end fitting x 1⁄2" (15mm) brass fine thread female end x 1⁄2" (15mm) brass pressures, please contact Watts Regulator
FIP thread fitting FIP thread fitting Technical Service at (978) 689-6130.
Flexible Connectors

FS-CFC-S-CF – Size: 7⁄16" (11mm) brass

compression end fitting x 1⁄2" (15mm) For additional information,
brass FIP thread fitting request literature ES-FS-CFC-S.

Series FS-CIC-S (1⁄4")

FloodSafe™ Braided Stainless Steel
Ice Maker Connectors FS-CIC-S
• FloodSafe™ shutoff device protects against catastrophic water damage
• Patented design Note: National residential plumbing codes
14

• Requires no power source reference the maximum operating temper-

ature as 140°F (60°C). Plumbing fixtures
• PVC tubing jacketed with braided stainless steel are designed to ANSI-ASME A112 18.1 at
• Available lengths: 6', 10', 20' 125psi (8.6 bar). For other applications
requiring higher operating temperatures or
pressures, please contact Watts Regulator
Specifications Models Technical Service at (978) 689-6130.
• Maximum Working Pressure: 125psi FS-CIC-S – Size: 1⁄4" x 1⁄4" (8 x 8mm)
(8.6 bar) brass compression end fittings For additional information,
request literature ES-FS-CIC-S.
• Maximum Working Temperature:
140°F (60°C)

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 125
 Series FS-CTC-S (3⁄8" – 1⁄2")
FloodSafe™ Braided Stainless Steel
Toilet Connectors
• FloodSafe™ shutoff device protects against catastrophic water damage
FS-CTC-S-FB
• Patented design
• Requires no power source Note: A minimum flow rate of 2.5 gallons
• Superior hook-up for toilet water supply per minute at the supply connection is
• Resists damage from extreme pressure surges required for proper shutoff operation.
(Typically 30psi (206.9 kPa) supply pressure
• PVC tubing jacketed with braided stainless steel meets this requirement.)
• Available lengths: 6", 9", 12" Performance is accurate to the 80psi (551.6
kPa) Maximum system pressure as required
by national plumbing codes.
Specifications
• Maximum Working Pressure: 125psi FS-CTC-S-CB – Size: 1⁄2" (15mm) brass Note: National residential plumbing codes
(8.6 bar) compression end fitting x 7⁄8" (22mm) ball- reference the maximum operating tempera-
• Maximum Working Temperature 180°F cock end fitting ture as 140°F (60°C). Plumbing fixtures are
FS-CTC-S-FB – Size: 1⁄2" (15mm) brass designed to ANSI-ASME A112 18.1 at
(82°C)
125psi (8.6 bar). For other applications
female iron pipe (FIP) thread fitting x 7⁄8"
requiring higher operating temperatures or
Models (22mm) ballcock end fitting pressures, please contact Watts Regulator
FS-CTC-S-CB – Size: 3⁄8" (10mm) brass FS-CTC-S-TB – Size: 3⁄8" (10mm) brass Technical Service at (978) 689-6130.
compression end fitting x 7⁄8" (22mm) ball- fine thread FIP end x 7⁄8" (22mm) ballcock
end fitting For additional information,
cock end fitting
FS-CTC-S-TB – Size: 1⁄2" (15mm) brass request literature ES-FS-CTC-S.
FS-CTC-S-CB – Size: 7⁄16" (11mm) brass
compression end fitting x 7⁄8" (22mm) ball- fine thread FIP end x 7⁄8" (22mm) ballcock
cock end fitting end fitting

Series FS-CWM-S (3⁄4" x 3⁄4")

FloodSafe™ Braided Stainless Steel
Washing Machine Connectors FS-CWM-S-HH
• FloodSafe™ shutoff device protects against catastrophic water damage
• Patented design
• Requires no power source
• Full flow capacity
Note: A minimum flow rate of 2.5 gallons
• Superior resistance to the destructive effects of vibration/extreme pressure surges per minute at the supply connection is
caused by washing machine solenoid valves required for proper shutoff operation.
(Typically 30psi (206.9 kPa) supply pressure
• PVC tubing jacketed with braided stainless steel meets this requirement.)
Flexible Connectors

• Available lengths: 48", 60", 72" Performance is accurate to the 80psi (551.6
kPa) Maximum system pressure as required
by national plumbing codes.

Specifications Models Note: National residential plumbing codes

34 34
reference the maximum operating tempera-
• Maximum Working Pressure: 125psi FS-CWM-S-HH – Size ⁄ " x ⁄ " (20 x ture as 140°F (60°C). Plumbing fixtures are
(8.6 bar) 20mm) female hose bibb connections designed to ANSI-ASME A112 18.1 at
• Maximum Working Temperature: 180°F 125psi (8.6 bar). For other applications
(82°C) requiring higher operating temperatures or
pressures, please contact Watts Regulator
Technical Service at (978) 689-6130.

For additional information, request literature

14

ES-FS-CWM-S.

126 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series CDC-S (3⁄8" – 3⁄4")
Braided Stainless Steel Water Supply Connectors
for Dishwashers CDC-S-FE
Maximum Pressure: 125psi (8.6 bar)
• Supplied with elbow fittings Maximum Temperature:180°F (82°C)
• PVC tubing jacketed with braided stainless steel
• Superior resistance to chlorinated water Note: National residential plumbing codes
reference the maximum operating tempera-
• Available lengths: 48", 60", 72" ture as 140°F (60°C). Plumbing fixtures are
designed to ANSI-ASME A112 18.1 at
Models 125psi (8.6 bar). For other applications
requiring higher operating temperatures or
CDC-S-CE – Size: 3⁄8" (10mm) brass nut CDC-S-FE – Size: 1⁄2" (15mm) brass nut
pressures, please contact Watts Regulator
compression end fitting x 3⁄8" (10mm) female iron pipe (FIP) thread connector x 3⁄8" Technical Service at (978) 689-6130.
compression end fitting with a brass male (10mm) compression end fitting with a brass
iron pipe thread elbow attached to the male iron pipe thread elbow attached to the For additional information,
compression end fitting compression end fitting request literature ES-CDC-S.

Series CFC-S (3⁄8" – 1⁄2")

Flexible, Braided Stainless Steel Water Supply
CFC-S-CC
Connectors for Faucets
• PVC tubing jacketed with braided stainless steel Delta Style Faucet Connector:
• Excellent for difficult installations involving misalignment of piping or cramped locations CFC-S-CO – Size: 3⁄8" (10mm) brass
• Superior resistance to vibration and bursting compression end fitting x 3⁄8" (10mm) brass
• Available lengths: 12", 16", 20", 24", 30", 36", 48", 60", 72" OD compression end fitting
Maximum Pressure: 125psi (8.6 bar)
Models Maximum Temperature:180°F (82°C)
CFC-S-CC – Size: 3⁄8" x 3⁄8" (10 x 10mm) CFC-S-FF – Size: 1⁄2" x 1⁄2" (15 x 15mm) All hoses are NSF61 approved for safer
brass nut compression end fittings brass FIP thread fittings drinking water.
CFC-S-CF – Size: 1⁄2" (15mm) brass CFC-S-TF – Size: 1⁄2" (15mm) brass fine
compression end fitting x 1⁄2" (15mm) brass thread female end x 1⁄2" (15mm) brass FIP Note: National residential plumbing codes
female iron pipe (FIP) thread fitting thread fitting reference the maximum operating temper-
ature as 140°F (60°C). Plumbing fixtures
CFC-S-CF – Size: 3⁄8" (10mm) brass CFC-S-TF – Size: 3⁄8" (10mm) brass fine are designed to ANSI-ASME A112 18.1 at
compression end fitting x 1⁄2" (15mm) brass thread female end x 1⁄2" (15mm) brass FIP 125psi (8.6 bar). For other applications
FIP thread fitting thread fitting requiring higher operating temperatures or
CFC-S-CF – Size: 7⁄16" (11mm) brass pressures, please contact Watts Regulator
compression end fitting x 1⁄2" (15mm) Technical Service at (978) 689-6130.
brass FIP thread fitting
For additional information,
request literature ES-CFC-S.

Series CFC-P
Flexible Connectors

(3⁄8" – 1⁄2")
Flexible, Reinforced PVC Water Supply Connectors
for Faucets CFC-P-CF
• PVC tubing jacketed with braided nylon and an outer protective layer of PVC
• Resistance to the effects of vibration and bursting from extreme pressure surges
• Available lengths: 12", 16", 20", 24", 30", 36", 48", 60", 72"

Specifications
• Maximum Working Pressure: 125psi CFC-P-CF – Size: 1⁄2" (15mm) brass com- CFC-P-TF – Size: 3⁄8" (10mm) brass fine
(8.6 bar) pression end fitting x 1⁄2" (15mm) brass FIP thread FIP fitting x 1⁄2" (15mm) brass FIP
thread fitting thread fitting
14

• Maximum Temperature: 140°F (60°C)

CFC-P-CF – Size: 7⁄16" (11mm) brass Note: National residential plumbing codes
compression end fitting x 1⁄2" (15mm) brass reference the maximum operating tempera-
Models FIP thread fitting ture as 140°F (60°C). Plumbing fixtures are
CFC-P-CC – Size: 3⁄8" x 3⁄8" (10 x 10mm) CFC-P-FF – Size: 1⁄2" x 1⁄2" (15 x 15mm) designed to ANSI-ASME A112 18.1 at
brass nut compression end fittings brass FIP thread fittings 125psi (8.6 bar). For other applications
requiring higher operating temperatures or
CFC-P-CF – Size: 3⁄8" (10mm) brass CFC-P-TF – Size: 1⁄2" (15mm) brass fine pressures, please contact Watts Regulator
compression end fitting x 1⁄2" (15mm) brass thread FIP fitting x 1⁄2" (15mm) brass FIP Technical Service at (978) 689-6130.
female iron pipe (FIP) thread fitting thread fitting
For additional information,
request literature ES-CFC-P.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 127
 Model CIC-P (1⁄4")
Flexible, Reinforced PVC Water Supply Connectors
for Ice Makers CIC-P
• PVC tubing jacketed with braided nylon and and outer protective layer of PVC
Note: National residential plumbing codes
• Available lengths: 6', 10', 20' reference the maximum operating temper-
ature as 140°F (60°C). Plumbing fixtures
Specifications Models are designed to ANSI-ASME A112 18.1 at
• Maximum Working Pressure: 125psi 125psi (8.6 bar). For other applications
CIC-P – Size: 1⁄4" x 1⁄4" (8 x 8mm) brass
requiring higher operating temperatures or
(8.6 bar) compression end fittings pressures, please contact Watts Regulator
• Maximum Working Temperature: Technical Service at (978) 689-6130.
140°F (60°C)
For additional information,
request literature ES-CIC-P.

Series CTC-S (3⁄8" – 1⁄2")

Flexible, Braided Stainless Steel Water Supply
Connectors for Toilets
• Superior hook-up for toilet water supply
CTC-S-FB
• Resists damage from extreme pressure surges
• PVC tubing jacketed with braided stainless steel
• Available lengths: 6", 9", 12", 16", 20"

Specifications
• Maximum Working Pressure: 125psi CTC-S-CB – Size: 1⁄2" (15mm) brass com-
(8.6 bar) pression end fitting x 7⁄8" (22mm) ballcock
• Maximum Working Temperature 180°F end fitting
(82°C) CTC-S-FB – Size: 1⁄2" (15mm) brass Note: National residential plumbing codes
female iron pipe (FIP) thread fitting x 7⁄8" reference the maximum operating tempera-
Models (22mm) ballcock end fitting ture as 140°F (60°C). Plumbing fixtures are
designed to ANSI-ASME A112 18.1 at
CTC-S-CB – Size: 3⁄8" (10mm) brass com- CTC-S-TB – Size: 3⁄8" (10mm) brass fine 125psi (8.6 bar). For other applications
pression end fitting x 7⁄8" (22mm) ballcock thread FIP end x 7⁄8" (22mm) ballcock end requiring higher operating temperatures or
end fitting fitting pressures, please contact Watts Regulator
CTC-S-CB – Size: 7⁄16" (11mm) brass CTC-S-TB – Size: 1⁄2" (15mm) brass fine Technical Service at (978) 689-6130.
compression end fitting x 7⁄8" (22mm) ball- thread FIP end x 7⁄8" (22mm) ballcock end
fitting For additional information,
cock end fitting
request literature ES-CTC-S.
Flexible Connectors

Series CTC-P (3⁄8" – 7⁄8")

Flexible, Reinforced PVC Water Supply Connectors for Toilets
• Efficient hook-up for water supply to toilet CTC-P-CB
• PVC tubing jacketed with braided nylon and an outer protective layer of PVC
• Available lengths: 6", 9", 12", 16", 20"

Specifications
• Maximum Working Pressure: 125psi
(8.6 bar) CTC-P-CB – Size: 1⁄2" (15mm) brass com-
• Maximum Working Temperature: 140°F pression end fitting x 7⁄8" (22mm) ballcock
14

(60°C) Note: National residential plumbing codes

end fitting
reference the maximum operating tempera-
CTC-P-TB – Size: 3⁄8" (10mm) brass fine ture as 140°F (60°C). Plumbing fixtures are
Models thread female iron pipe (FIP) fitting x 7⁄8" designed to ANSI-ASME A112 18.1 at
CTC-P-CB – Size: 3⁄8" (10mm) brass com- (22mm) ballcock end fitting 125psi (8.6 bar). For other applications
pression end fitting x 7⁄8" (22mm) ballcock CTC-P-TB – Size: 1⁄2" (15mm) brass fine requiring higher operating temperatures or
end fitting pressures, please contact Watts Regulator
thread FIP fitting x 7⁄8" (22mm) ballcock end
Technical Service at (978) 689-6130.
CTC-P-CB – Size: 7⁄16" (11mm) brass fitting
compression end fitting x 7⁄8" (22mm) ball- CTC-P-FB – Size: 1⁄2" (15mm) brass FIP For additional information,
cock end fitting thread fitting x 7⁄8" (22mm) ballcock end fitting request literature ES-CTC-P.

128 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series CWH-S (5⁄8" – 7⁄8")
Flexible, Braided Stainless Steel Water Heater Connectors
• For connecting water heaters to the water supply
• Protects against the destructive effects of system pressure surges
• PVC tubing jacketed with braided stainless steel
• Available lengths: 12", 15", 18", 24", 36", 48", 60"

Specifications CWH-S-FF-L
• Maximum Working Pressure: 150psi (10.3 bar)
• Maximum Working Temperature: 180°F (82°C)
• All hoses are NSF 61 approved for safer drinking water

Models
CWH-S-FF-L – Size: 3⁄4" x 3⁄4" (20x20mm), brass female iron pipe (FIP) threaded ends
CWH-S-AF-L – Size: 5⁄8" (16mm) compression end fitting x 3⁄4" (20mm) brass FIP threaded
fitting
CWH-S-AF-L – Size: 7⁄8" (22mm) compression end fitting x 3⁄4" (20mm) brass FIP threaded
fitting
CWH-S-AA-L – Size: 7⁄8" x 7⁄8" (22 x 22mm) compression end fittings
CWH-S-FM-L – Size: 3⁄4" (20mm) brass FIP thread fitting x 3⁄4" (20mm) brass male iron pipe
threaded fitting
CWHS-AM-L – Size: 7⁄8" (22mm) compression end fitting x 3⁄4" (20mm) brass male iron pipe
threaded fitting
Note: National residential plumbing codes reference the maximum operating temperature as
140°F (60°C). Plumbing fixtures are designed to ANSI-ASME A112 18.1 at 125psi (8.6 bar).
For other applications requiring higher operating temperatures or pressures, please contact
Watts Regulator Technical Service at (978) 689-6130.
For additional information, request literature ES-CWH-S.

Series CWM-S (3⁄4" x 3⁄4")

Flexible, Braided Stainless Steel Washing Machine Water
Supply Connectors CWM-S-HL
• Full flow capacity
Flexible Connectors

• Superior resistance to the destructive effects of vibration/extreme pressure surges

caused by washing machine solenoid valves
• PVC tubing jacketed with braided stainless steel
• Available lengths: 48", 60", 72"

Specifications
• Maximum Working Pressure: 125psi (8.6 bar)
• Maximum Working Temperature: 180°F (82°C)

Models
14

CWM-S-HH – Size 3⁄4" x 3⁄4" (20 x 20mm) female hose bibb connections
CWM-S-HL – Size 3⁄4" x 3⁄4" (20 x 20mm) female hose bibb connections with one
connection secured to a 90° elbow

Note: National residential plumbing codes reference the maximum operating temperature as
140°F (60°C). Plumbing fixtures are designed to ANSI-ASME A112 18.1 at 125psi (8.6 bar).
For other applications requiring higher operating temperatures or pressures, please contact
Watts Regulator Technical Service at (978) 689-6130.

For additional information, request literature ES-CWM-S.

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 129
 Series DPG1 (2" – 4") MODEL

DPG1-2
DIAL SIZE

2" 0 – 15psi
SCALE

0 – 103 kPa
Bottom Entry Pressure Gauges DPG1-2 2" 0 – 30psi 0 – 207 kPa
DPG1-2 2" 0 – 60psi 0 – 413 kPa
• Available in dial sizes 2", 21⁄2", 3", 4"
DPG1-2 2" 0 – 100psi 0 – 689 kPa
• 1⁄4" (8mm) NPT connection DPG1-2 2" 0 – 160psi 0 – 1103 kPa
• Working temperature: -4°F to 176°F (-20°C to 80°C) DPG1-2 2" 0 – 200psi 0 – 1379 kPa
DPG1-2 2" 0 – 300psi 0 – 2069 kPa
DPG1-21⁄2 21⁄2" 0 – 15psi 0 – 103 kPa
DPG1-21⁄2 21⁄2" 0 – 30psi 0 – 207 kPa
DPG1-21⁄2 21⁄2" 0 – 60psi 0 – 413 kPa
DPG1-21⁄2 21⁄2" 0 – 100psi 0 – 689 kPa
DPG1-21⁄2 21⁄2" 0 – 160psi 0 – 1103 kPa
DPG1-21⁄2 21⁄2" 0 – 200psi 0 – 1379 kPa
DPG1-21⁄2 21⁄2" 0 – 300psi 0 – 2069 kPa
DPG1-3 3" 0 – 15psi 0 – 103 kPa
DPG1-2 DPG1-3 3" 0 – 30psi 0 – 207 kPa
DPG1-3 3" 0 – 60psi 0 – 413 kPa
DPG1-3 3" 0 – 100psi 0 – 689 kPa
DPG1-3 3" 0 – 160psi 0 – 1103 kPa
DPG1-3 3" 0 – 200psi 0 – 1379 kPa
DPG1-3 3" 0 – 300psi 0 – 2069 kPa
DPG1-4 4" 0 – 15psi 0 – 103 kPa
DPG1-4 4" 0 – 30psi 0 – 207 kPa
DPG1-4 4" 0 – 60psi 0 – 413 kPa
DPG1-4 4" 0 – 100psi 0 – 689 kPa
DPG1-4 4" 0 – 160psi 0 – 1103 kPa
DPG1-4 4" 0 – 200psi 0 – 1379 kPa
DPG1-4 4" 0 – 300psi 0 – 2069 kPa
For additional information, DPG1-4 4" 0 – 600psi 0 – 4137 kPa
request literature ES-DPG-1. DPG1-4 4" 0 – 1000psi 0 – 6895 kPa

Series DPG3 (11⁄2" – 3")

MODEL

DPG3-11⁄2
DIAL SIZE

11⁄2" 0 – 60psi
SCALE

0 – 413 kPa
Center Back Entry Pressure Gauges DPG3-11⁄2 11⁄2" 0 – 160psi 0 – 1103 kPa
DPG3-2 2" 0 – 15psi 0 – 103 kPa
• Available in dial sizes 11⁄2", 2", 21⁄2", 3" DPG3-2 2" 0 – 30psi 0 – 207 kPa
• 1⁄8", 1⁄4" (3, 8mm) NPT connection DPG3-2 2" 0 – 60psi 0 – 413 kPa
• Working temperature -4°F to 176°F (-20°C to 80°C) DPG3-2 2" 0 – 100psi 0 – 689 kPa
DPG3-2 2" 0 – 160psi 0 – 1103 kPa
DPG3-2 2" 0 – 200psi 0 – 1379 kPa
DPG3-2 2" 0 – 300psi 0 – 2069 kPa
DPG3-21⁄2 21⁄2" 0 – 15psi 0 – 103 kPa
DPG3-21⁄2 21⁄2" 0 – 30psi 0 – 207 kPa
DPG3-21⁄2 21⁄2" 0 – 60psi 0 – 413 kPa
DPG3-21⁄2 21⁄2" 0 – 100psi 0 – 689 kPa
DPG3-21⁄2 21⁄2" 0 – 160psi 0 – 1103 kPa
DPG3-21⁄2 21⁄2" 0 – 200psi 0 – 1379 kPa
Gauges

DPG3 DPG3-21⁄2 21⁄2" 0 – 300psi 0 – 2069 kPa

DPG3-3 3" 0 – 15psi 0 – 103 kPa
DPG3-3 3" 0 – 30psi 0 – 207 kPa
DPG3-3 3" 0 – 60psi 0 – 413 kPa
DPG3-3 3" 0 – 100psi 0 – 689 kPa
15

For additional information, DPG3-3 3" 0 – 160psi 0 – 1103 kPa

request literature ES-DPG-3. DPG3-3 3" 0 – 200psi 0 – 1379 kPa
DPG3-3 3" 0 – 300psi 0 – 2069 kPa

130 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series DPG5 (2" – 3")
Top Entry Pressure Gauges
• Available in dial sizes 2", 21⁄2", 3"
• 1⁄8", 1⁄4" (3, 8mm) NPT connection
• Working temperature -4°F to 176°F (-20°C to 80°C)
DPG5
MODEL DIAL SIZE SCALE
DPG5-2 (1⁄8" connection) 2" 0 – 160psi 0 – 11 bar
DPG5-2 2" 0 – 15psi 0 – 103 kPa
DPG5-2 2" 0 – 30psi 0 – 207 kPa
DPG5-2 2" 0 – 60psi 0 – 413 kPa
DPG5-2 2" 0 – 100psi 0 – 689 kPa
DPG5-2 2" 0 – 160psi 0 – 1103 kPa
DPG5-2 2" 0 – 200psi 0 – 1379 kPa
DPG5-2 2" 0 – 300psi 0 – 2069 kPa
DPG5-21⁄2" 21⁄2" 0 – 15psi 0 – 103 kPa
DPG5-21⁄2" 21⁄2" 0 – 30psi 0 – 207 kPa
DPG5-21⁄2" 21⁄2" 0 – 60psi 0 – 413 kPa
DPG5-21⁄2" 21⁄2" 0 – 100psi 0 – 689 kPa
DPG5-21⁄2" 21⁄2" 0 – 160psi 0 – 1103 kPa
DPG5-21⁄2" 21⁄2" 0 – 200psi 0 – 1379 kPa
DPG5-21⁄2" 21⁄2" 0 – 300psi 0 – 2069 kPa
DPG5-3 3" 0 – 15psi 0 – 103 kPa
DPG5-3 3" 0 – 30psi 0 – 207 kPa
DPG5-3 3" 0 – 60psi 0 – 413 kPa
DPG5-3 3" 0 – 100psi 0 – 689 kPa
For additional information,
DPG5-3 3" 0 – 160psi 0 – 1103 kPa request literature ES-DPG-5.
DPG5-3 3" 0 – 200psi 0 – 1379 kPa
DPG5-3 3" 0 – 300psi 0 – 2069 kPa

Series DPTG1 and DPTG3 (21⁄2" – 3")

Combined Temperature and Pressure Gauges
Models B
• DPTG1 bottom entry 3" dial size B C
• DPTG3 center back entry, 21⁄2" or 3" dial size
• DPTG3A center back entry with extended temperature element
A DPTG3
• DPTG3L center back entry with extended mounting nut
• 1⁄2" (15mm) NPT connection For additional information,
request literature ES-
• Working temperature 40°F to 250°F (4.4°C to 121°C) DPTG-1 or ES-DPTG-3.
A

DIAL TEMPERATURE INCLUDES VR DIMENSIONS

MODEL SIZE SIZE SCALE RANGE RETAINING VALVE

A B C
in. mm °F °C in. mm in. mm in. mm
DPTG1-3 3" 12
⁄" 15 0 – 50psi 0 – 345kPa 32 – 248 0 – 120 N 4 101 1 25 – –
DPTG1-3 3" 1⁄2" 15 0 – 75psi 0 – 517kPa 32 – 248 0 – 120 N 4 101 1 25 – –
DPTG1-3 3" 1⁄2" 15 0 – 200psi 0 – 689 kPa 32 – 248 0 – 120 N 4 101 1 25 – –
DPTG3-21⁄2 21⁄2" 1⁄2" 15 0 – 50psi 0 – 340 kPa 60 – 320 16 – 160 Y 1 25 115⁄16 49 7⁄8 23
DPTG3-21⁄2 21⁄2" 1⁄2" 15 0 – 75psi 0 – 517 kPa 60 – 320 16 – 160 Y 1 25 115⁄16 49 7⁄8 23
Gauges

DPTG3-21⁄2 21⁄2" 1⁄2" 15 0 – 200psi 0 – 1379 kPa 60 – 320 16 – 160 Y 1 25 115⁄16 49 7⁄8 23
DPTG3-21⁄2 21⁄2" 1⁄4" 8 0 – 75psi 0 – 517 kPa 60 – 320 16 – 160 N 1 25 115⁄16 49 7⁄8 23
DPTG3-3 3" 1⁄2" 15 0 – 50psi 0 – 340 kPa 60 – 320 16 – 160 Y 1 25 115⁄16 49 7⁄8 23
DPTG3-3 3" 1⁄2" 15 0 – 75psi 0 – 517 kPa 60 – 320 16 – 160 Y 1 25 115⁄16 49 7⁄8 23
DPTG3-3 3" 1⁄2" 15 0 – 200psi 0 – 1379 kPa 60 – 320 16 – 160 Y 1 25 115⁄16 49 7⁄8 23
15

DPTG3A-21⁄2 21⁄2" 1⁄4" 8 0 – 75psi 0 – 517 kPa 60 – 320 16 – 160 N 1 25 115⁄16 49 2 51

DPTG3A-3 3" 1⁄4" 8 0 – 75psi 0 – 517 kPa 60 – 320 16 – 160 N 1 25 115⁄16 49 2 51
DPTG3L-21⁄2 21⁄2" 1⁄4" 8 0 – 75psi 0 – 517 kPa 60 – 320 16 – 160 N 2 51 315⁄16 100 1 25
DPTG3L-3 3" 1⁄4" 8 0 – 75psi 0 – 517 kPa 60 – 320 16 – 160 N 2 51 315⁄16 100 1 25

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 131
 Series IWTG-Gas (2")
Air Test Assembly Gauges
• Available in 2" dial size
• Includes 3⁄4" (20mm) FPT x Schrader type air valve w/cap connection

MODEL DIAL SIZE SCALE

IWTG-Gas 2 2" 0 – 15psi 0 – 103 kPa

IWTG-Gas 2 2" 0 – 30psi 0 – 207 kPa
IWTG-Gas 2 2" 0 – 60psi 0 – 413 kPa
IWTG-Gas 2 2" 0 – 100psi 0 – 689 kPa
For additional information, IWTG-Gas
request literature ES-IWTG-Gas.

Series IWTG-NYC (21⁄2")

Air Test Assembly Gauges
• 2% Accuracy, full range
• Includes 3⁄4" (20mm) FPT x Schrader type air valve w/cap connection
• Includes shutoff valve

MODEL DIAL SIZE SCALE

IWTG-NYC 21⁄2" 0 – 5psi 0 – 34 kPa

IWTG-NYC 21⁄2" 0 – 10psi 0 – 69 kPa
IWTG-NYC
For additional information,
request literature ES-IWTG-NYC-HTX.

Series IWTG-HTX (4")

Air Test Assembly Gauges
• 1% Accuracy, full range
• Includes 3⁄4" (20mm) FPT x Schrader type air valve w/cap connection
• Includes shutoff valve
• Includes set hand

MODEL DIAL SIZE SCALE

IWTG-HTX 4" 0 – 5psi 0 – 34 kPa

IWTG-HTX 4" 0 – 10psi 0 – 69 kPa IWTG-HTX

For additional information,

request literature ES-IWTG-NYC-HTX.
Gauges
15

132 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series TB (11⁄2" – 4")
Center Back Entry Bimetal Thermometers
• Available in dial sizes: 11⁄2", 21⁄2", 3", 4"
• Includes 1⁄2" (15mm) NPT brass thermowell with set screw

MODEL DIAL SIZE SCALE PROBE SIZE

°F °C in. mm
12
TB-1 ⁄ -1 12
1⁄" 32 – 176 0 – 80 1 25 TB
TB-21⁄2-2 21⁄2" 32 – 140 0 – 60 2 51
TB-21⁄2-3 21⁄2" 32 – 248 0 – 120 3 76
TB-21⁄2-4 21⁄2" 32 – 248 0 – 120 4 102
TB-3-2 3" -22 – 122 -30 – 50 2 51
TB-3-2 3" 32 – 140 0 – 60 2 51
TB-3-2 3" 32 – 248 0 – 120 2 51
TB-3-4 3" -22 – 122 -30 – 50 4 102
TB-3-4 3" 32 – 140 0 – 60 4 102
TB-3-4 3" 32 – 248 0 – 120 4 102
TB-4-2 4" -22 – 122 -30 – 50 2 51
TB-4-2 4" 32 – 140 0 – 60 2 51
TB-4-2 4" 32 – 248 0 – 120 2 51
TB-4-4 4" -22 – 122 -30 – 50 4 102
TB-4-4 4" 32 – 140 0 – 60 4 102 For additional information,
TB-4-4 4" 32 – 248 0 – 120 4 102 request literature ES-TB.

Series TBR (3")

Bottom Entry Bimetal Thermometers
• Available in 3" dial size
• Includes 1⁄2" (15mm) NPT brass snap-in thermowell

MODEL DIAL SIZE SCALE PROBE SIZE

°F °C in. mm

TBR-3-2 3" -22 – 122 -30 – 50 2 51

TBR-3-2 3" 32 – 248 0 – 120 2 51
TBR-3-3 3" -22 – 122 -30 – 50 3 76
TBR-3-3 3" 32 – 140 0 – 60 3 76
TBR-3-4 3" -22 – 122 -30 – 50 4 102 TBR
TBR-3-4 3" 32 – 140 0 – 60 4 102
TBR-3-4 3" 32 – 248 0 – 120 4 102

For additional information,

request literature ES-TBR.
Gauges
15

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 133
 Series TBP (21⁄2")
Pipe Mount Bimetal Thermometers
• Available in 21⁄2" dial size
• Pipe mount – choice of spring mount (M) or strap mount (F) TBP

MODEL DIAL SIZE SCALE

°F °C

TBP-M-2 ⁄ 12 12
2⁄" 32 – 248 0 – 120
TBP-F-21⁄2 21⁄2" 32 – 248 0 – 120

For additional information,

request literature ES-TBP.

Series TBC (21⁄2")

Center Back Entry Bimetal Thermometers
• Available in 21⁄2" dial size
• Chimney mount-center back entry
TBC
MODEL DIAL SIZE SCALE PROBE SIZE
°F °C in. mm

TBC-21⁄2-4 21⁄2" 32 – 932 0 – 500 4 102

TBC-21⁄2-6 21⁄2" 32 – 932 0 – 500 6 152
TBC-21⁄2-8 21⁄2" 32 – 932 0 – 500 8 203
TBC-21⁄2-12 21⁄2" 32 – 932 0 – 500 12 305

For additional information,

request literature ES-TBC.

Series TA (9")
Adjustable Angle Thermometers
• Available in 9" scale size

MODEL TEMPERATURE RANGE STEM SIZE

°F °C in. mm

TA-9-31⁄2 -40 – 110 -40 – 43 31⁄2 89

TA-9-31⁄2 0 – 120 -17 – 48 31⁄2 89
TA-9-31⁄2 0 – 160 -17 – 71 31⁄2 89
TA-9-31⁄2 30 – 240 28 – 115 31⁄2 89
TA-9-31⁄2 30 – 300 28 – 148 31⁄2 89
TA-9-6 -40 – 110 -40 – 43 6 152 TA
Gauges

TA-9-6 0 – 120 -17 – 48 6 152

TA-9-6 0 – 160 -17 – 71 6 152
TA-9-6 30 – 240 28 – 115 6 152
TA-9-6 30 – 300 28 – 148 6 152
15

For additional information,

request literature ES-TA.

134 For assistance, contact your local authorized Watts agent or visit our website at www.watts.com
Series TL (5")
Angle Thermometers
• Available in 5" scale size

MODEL TEMPERATURE RANGE STEM SIZE

°F °C in. mm

TL-5-2 -40 – 110 -40 – 43 5 16

1⁄ 33
TL-5-2 20 – 180 -6 – 82 15⁄16 33
TL-5-2 30 – 240 28 – 115 15⁄16 33
TL-5-2 30 – 300 28 –148 15⁄16 33
For additional information, TL
request literature ES-TL.

Series G-TB, G-TBR (1⁄2")

Brass Thermowells
• G-TB with set screw for thermometer models TB and TBC
• G-TBR for thermometer model TBR
G-TB

For additional information, request

literature ES-G-TB or ES-B-TBR.

Series TP (1⁄4", 1⁄2")

Test Plugs for Pressure and Temperature Test Readings
• Temperature and pressure probe inserts into the test plug for test readings
• No need to leave costly gauges in the supply line

Specifications Models
Used on various applications of gas, air, TP-N: Neoprene (Blue) – Natural gas and
water or chemicals up to 500psi (34.5 bar). petroleum products. Temperature range: -
The pressure gauge adapter has a 0.076" 40°F to 200°F (-40°C to 93°C).
(2mm) diameter probe of 300 series stain- TP-E: EPDM (White) – Hot and cold water Features
less steel with brass union nut. The probe service. Temperature range: -40°F to • Economical means of balancing heating
operates in either 1⁄4" or 1⁄2" (8 or 15mm) 275°F (-40°C to 135°C). and air conditioning systems
NPT test plugs. Plug extensions are also TP-V: Viton (Green) – Hot oil service,
available in 1⁄4" and 1⁄2" (8 and 15mm) • Eliminates shutting down system for
chemical service. Temperature range: - temperature and pressure checks
NPT sizes to accommodate insulated 10°F to 400°F (-23°C to 204°C).
pipe situations.
For additional information,
request literature ES-TP.
Gauges
15

For assistance, contact your local authorized Watts agent or visit our website at www.watts.com 135
 Trademarks
Celcon® is a registered trademark of Celanese, Limited.
Noryl® is a registered trademark of General Electric Company.
Teflon® is a registered trademark of the E.I. Dupont de Nemours & Company.
Viton® is a registered trademark of DuPont Dow Elastomers.

136
 For Technical Assistance Call Your Authorized Watts Agent.
Telephone # Fax #
HEADQUARTERS: Watts Regulator Company 815 Chestnut St., North Andover, MA 01845-6098 U.S.A. 978 688-1811 978 794-1848
North

Edwards, Platt & Deely, Inc. 271 Royal Ave., Hawthorne, NJ 07506 973 427-2898 973 427-4246
East

Edwards, Platt & Deely, Inc. 368 Wyandanch Ave., North Babylon, NY 11703 631 253-0600 631 253-0303
W. P. Haney Co., Inc. 51 Norfolk Ave., South Easton, MA 02375 508 238-2030 508 238-8353

J. B. O’Connor Company, Inc. P.O. Box 12927, Pittsburgh, PA 15241 724 745-5300 724 745-7420
Atlantic

RMI Glenfield Bus. Ctr., 2535 Mechanicsville Tpk., Richmond, VA 23223 804 643-7355 804 643-7380
Mid

The Joyce Agency, Inc. 8442 Alban Rd., Springfield, VA 22150 703 866-3111 703 866-2332
Vernon Bitzer Associates, Inc. 980 Thomas Drive, Warminster, PA 18974 215 443-7500 215 443-7573
WMS Sales, Inc. (Main office) 9580 County Rd., Clarence Center, NY 14032 716 741-9575 716 741-4810

Billingsley & Associates, Inc. 2728 Crestview Ave., Kenner, LA 70062-4829 504 602-8100 504 602-8106
Billingsley & Associates, Inc. 478 Cheyenne Lane, Madison, MS 39110 601 856-7565 601 856-8390
Francisco J. Ortiz & Co., Inc. Charlyn Industrial Pk., Road 190 KM1.9 - Lot #8, Carolina, Puerto Rico 00983 787 769-0085 787 750-5120
South

Mid-America Marketing, Inc. 203 Industrial Drive, Birmingham, AL 35211 205 879-3469 205 870-5027
East

Mid-America Marketing, Inc. 1364 Foster Avenue, Nashville, TN 37210 615 259-9944 615 259-5111
Mid-America Marketing, Inc. 5466 Old Hwy. 78, Memphis, TN 38118 901 795-0045 901 795-0394
Smith & Stevenson Co., Inc. 4935 Chastain Ave., Charlotte, NC 28217 704 525-3388 704 525-6749
Harry Warren, Inc. 1400 North Orange Blossom Trail, Orlando, FL 32804 407 841-9237 407 841-9246
Watts Georgia 2861-B Bankers Industrial Drive, Atlanta, GA 30360 770 209-3310 770 447-4583

Aspinall Associates, Inc. 6840 Hillsdale Court, Indianapolis, IN 46250 317 849-5757 317 845-7967
Dave Watson Associates 1325 West Beecher, Adrian, MI 49221 517 263-8988 517 263-2328
Central
North

Disney McLane & Associates 428 McGregor Ave., Cincinnati, OH 45206 800 542-1682 877 476-1682
BWA Company 17610 S. Waterloo Rd., Cleveland, OH 44119 216 486-1010 216 486-2860
Mid-Continent Marketing Services Ltd. 1724 Armitage Ct., Addison, IL 60101 630 953-1211 630 953-1067
Soderholm & Associates, Inc. 7150 143rd Ave. N.W., Anoka, MN 55303 763 427-9635 763 427-5665
Stickler & Associates 333 North 121 St., Milwaukee, WI 53226 414 771-0400 414 771-3607

Hugh M. Cunningham, Inc. 13755 Benchmark, Dallas, TX 75234 972 888-3808 972 888-3838
Central

HMC Sandia Group 13755 Benchmark, Dallas, TX 75234 505 222-3134 800 339-0191
South

Mack McClain & Associates 4407 Meramec Bottom, Suite G, St. Louis, MO 63129 314 894-8188 314 894-8388
Mack McClain & Associates, Inc. 1450 NE 69th Place, Ste. 56 Ankeny, IA 50021 515 288-0184 515 288-5049
Mack McClain & Associates, Inc. 15090 West 116th St., Olathe, KS 66062 913 339-6677 913 339-9518
OK! Sales, Inc. 214-A NE 12th., Moore, OK 73160 405 794-5200 405 794-5250

Delco Sales, Inc. 1930 Raymer Ave., Fullerton, CA 92833 714 888-2444 714 888-2448
Delco Sales, Inc. 111 Sand Island Access Rd., Unit I-10, Honolulu, HI 96819 808 842-7900 808 842-9625
Western

Fanning & Associates, Inc. 6765 Franklin St., Denver, CO 80229-7111 303 289-4191 303 286-9069
Hollabaugh Brothers & Associates 6915 South 194th St., Kent, WA 98032 253 867-5040 253 867-5055
Hollabaugh Brothers & Associates 3028 S.E. 17th Ave., Portland, OR 97202 503 238-0313 503 235-2824
P I R Sales, Inc. 3050 North San Marcos Place, Chandler, AZ 85225 480 892-6000 480 892-6096
Preferred Sales 31177 Wiegman Road, Hayward, CA 94544 510 487-9755 510 476-1595
R. E. Fitzpatrick Sales, Inc. 4109 West Nike Dr. (8250 South), West Jordan, UT 84088 801 282-0700 801 282-0600

Watts Industries (Canada) Inc.

(Watts Regulator Co. Division) 5435 North Service Road, Burlington, Ontario L7L 5H7 905 332-4090 905 332-7068
Con-Cur West Marketing, Inc. 71B Clipper Street, Coquitlam, British Columbia V3K 6X2 604 540-5088 604 540-5084
D.C. Sales Ltd. #10-6130 4th St. S.E., Calgary, Alberta T2H 2B6 403 253-6808 403 259-8331
D.C. Sales Ltd. 16726 111 Ave, Edmonton, Alberta T5M 2S6 780 496-9495 780 496-9621
GTA Sales Team. Greater Toronto Area 888 208-8927 888 479-2887
Hydro-Mechanical Sales, Ltd. 3700 Joseph Howe Drive, Suite 1, Halifax, Nova Scotia B3L 4H7 902 443-2274 902 443-2275
Canada

Hydro-Mechanical Sales, Ltd. P.O. Box 1445 (Mailing), 297 Collishaw St., Suite 7 (shipping)
Moncton, New Brunswick E1C 9R2 506 859-1107 506 859-2424
J.D.S. Sales Ltd. 4 Lancaster Street, St. John’s, Newfoundland A1A 5P7 709 579-5771 709 579-1558
Les Ent. Roland Lajoie 6221 Marivaux, St-Leonard, QC H1P 3H6 514 328-6645 514 328-6131
Les Ent. Roland Lajoie 23 du Buisson, Pont Rouge, QC G3H 1X9 418 873-2500 418 873-2505
Mar-Win Agencies, Ltd. 1333 Clifton St., Winnipeg, Manitoba R3E 2V1 204 775-8194 204 786-8016
Northern Mechanical Sales P.O. Box 280 (mailing) 163 Pine St. (shipping), Garson, Ontario P3L 1S6 705 693-2715 705 693-4394
Palser Enterprises, Ltd. P.O. Box 28136 (mailing), 1885 Blue Heron Dr., #4,
London, Ontario N6H 5L9 519 471-9382 519 471-1049
RAM Mechanical Marketing Inc. 1401 St. John Street, Regina, Saskatchewan S4R 1S5 306 525-1986 306 525-0809
RAM Mechanical Marketing Inc. 510 Ave M South, Saskatoon, Saskatchewan S7M 2K9 306 244-6622 306 244-0807
Walmar Mechanical Sales 24 Gurdwara Rd., Nepean, Ontario K2E 8B5 613 225-9774 613 225-0673

0703 EXPORT Hdqtrs.: Watts Regulator Co. 815 Chestnut St., North Andover, MA 01845-6098 U.S.A. 978 688-1811 978 794-1848

Wa t e r S a f e t y & F l o w C o n t ro l P ro d u c t s USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com

Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca

C-WR 0732 © Watts Regulator Company, 2007