BAS40-00-V to BAS40-06-V

Vishay Semiconductors

Small Signal Schottky Diodes, Single & Dual

Features
These diodes feature very low turn-on voltage and fast switching e3 These devices are protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

BAS40-00-V
3

BAS40-04-V
3

Top View
1 2 1 2

BAS40-05-V
3

BAS40-06-V
3

Top View
1
18435

Mechanical Data
Case: SOT23, Plastic case Weight: approx. 8.8 mg Packaging Codes/Options: GS18 / 10 k per 13" reel (8 mm tape), 10 k/box GS08 / 3 k per 7" reel (8 mm tape), 15 k/box

Parts Table
Part BAS40-00-V BAS40-04-V BAS40-05-V BAS40-06-V Ordering code BAS40-00-V-GS18 or BAS40-00-V-GS08 BAS40-04-V-GS18 or BAS40-04-V-GS08 BAS40-05-V-GS18 or BAS40-05-V-GS08 BAS40-06-V-GS18 or BAS40-06-V-GS08 43 44 45 46 Type Marking Remarks Tape and Reel Tape and Reel Tape and Reel Tape and Reel

Absolute Maximum Ratings

Test condition

Symbol VRRM = VRWM = VR IF

Value 40 200 600 200

Unit V mA mA mW

tp < 1 s

IFSM Ptot

Device on fiberglass substrate, see layout on next page.

Document Number 85701 Rev. 1.7, 27-Sep-06

www.vishay.com 1

BAS40-00-V to BAS40-06-V
Vishay Semiconductors Thermal Characteristics
Tamb = 25 C, unless otherwise specified Parameter Thermal resistance junction to ambient air Junction temperature Storage temperature range
1) Device

Test condition

Symbol RthJA Tj Tstg

Value 5001) 125 - 65 to + 125

Unit K/W C C

on fiberglass substrate, see layout on next page.

Electrical Characteristics
Tamb = 25 C, unless otherwise specified Parameter Reverse breakdown voltage Leakage current Forward voltage Test condition IR = 10 A (pulsed) Pulse test VR = 30 V, tp < 300 s Pulse test tp < 300 s, IF = 1.0 mA Pulse test tp < 300 s, IF = 40 mA Diode capacitance Reverse recovery time VR = 0 V, f = 1 MHz IF = IR = 10 mA, iR = 1 mA, RL = 100 Symbol V(BR) IR VF VF CD trr 4.0 Min 40 20 100 380 1000 5 5 Typ. Max Unit V nA mV mV pF ns

Layout for RthJA test

7.5 (0.3) 3 (0.12)

1 (0.4) 12 (0.47) 15 (0.59) 0.8 (0.03)

2 (0.8) 1 (0.4) 2 (0.8)

5 (0.2)

1.5 (0.06) 5.1 (0.2)

www.vishay.com 2

Document Number 85701 Rev. 1.7, 27-Sep-06

BAS40-00-V to BAS40-06-V
Vishay Semiconductors Package Dimensions in mm (Inches): SOT23

17418

Document Number 85701 Rev. 1.7, 27-Sep-06

www.vishay.com 3

BAS40-00-V to BAS40-06-V
Vishay Semiconductors Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.

We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany

www.vishay.com 4

Document Number 85701 Rev. 1.7, 27-Sep-06

Legal Disclaimer Notice

Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishays terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000 Revision: 18-Jul-08

www.vishay.com 1