Scribd
Upload
73 views

2024-07-19 22:34:33 / User / DXP: P1457 Maximum DPF Differential Pressure Error

Uploaded by

Pedro Faustino
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
73 views

2024-07-19 22:34:33 / User / DXP: P1457 Maximum DPF Differential Pressure Error

Uploaded by

Pedro Faustino
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DDT Stage5_ENG_Version : 1.

55

Fault Code Fault Name


P1457 Maximum DPF differential pressure error
1) Overview

CODE REASON EFFECT

1. DPF DP sensor hose clogged CE Lamp Blink


E520621-00 2. DPF DP sensor defective Torque reduction 25%
3. PDF substrate polluted with soot or damaged Speed reduction Lv. 3

p
dx
DPF DP Sensor

r/
No. ECU Pin Description
1 2.07 +5 V supply

se
2 2.38 Ground
3 2.41 DPF DP signal
/U
2) Component Location
:33
:34
E
OR
C
RA
22
DA
II
NF
19 HY
UN
7- HD
-0
24
20

3) Condition for Running Diagnostic


Key ON or Engine running

4) Condition for Setting the Fault Code


The DPF differential pressure is more than maximum pressure dependent on exhaust gas flow.
This fault occurs when the soot in DPF excessively loaded. Therefore, if this fault continues to recur in a
short time, it is necessary to improve the phenomenon that soot accumulates excessively. For example,
air leak of Intake system, Injector failure etc.

5) Condition for Clearing the Fault Code


The DPF differential pressure returns within normal operating range.
DDT Stage5_ENG_Version : 1.55

6) Check List

Standard
Step Inspection YES NO
Value
1 P1457 is occurred on service tool? Step 2

2 Park the machine in a safe area and Key OFF. Step 3

Correct the
Check the hose of DPF DP sensor.
clogging or
3 Is there any clogging on the hose? Step 4
Replace the
in/out hose is swapped?
hose
Check DPF DP sensor connector for damaged, bent,

p
Do necessary
4 corroded or loose pins. Step 5
repair

dx
Connection problem?
Check wiring connection between the sensor and ECU
Do necessary
5 (refer to Pin No.) Step 6
repair

r/
Connection problem?
Replace DPF DP sensor and erase the fault.

se
Start the engine and set engine speed as high idle Do necessary
6 Step 7
more than 5 minutes and Key OFF & ON. repair
Is the fault code cleared?
Check the DPF.
/U
Contact
7 Is DPF substrate polluted with excessive soot Step 8
Help Desk
or damaged?
:33

Clean or replace DPF and erase the fault.


Start the engine and set engine speed as high idle Problem Contact
8
more than 5 minutes and Key OFF & ON. solved Help Desk
:34
E

Is the fault code cleared?


OR
C
RA
22
DA
II
NF
19 HY
UN
7- HD
-0
24
20

You might also like