0% found this document useful (0 votes)
16 views1 page

Platinum Resistance Temperature Detector M 222: Nominal Resistance R0 Tolerance Tolerance Order Number Plastic Bag

Uploaded by

fotosaei20241
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
16 views1 page

Platinum Resistance Temperature Detector M 222: Nominal Resistance R0 Tolerance Tolerance Order Number Plastic Bag

Uploaded by

fotosaei20241
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Platinum Resistance Temperature Detector M 222

Mseries PRTDs are designed for large volume applications where long term stability, interchangeability and
accuracy over a large temperature range are vital. Typical applications are Automotive, White goods, HVAC,
Energy management, Medical and Industrial equipment.

Nominal Tolerance Tolerance Order Number


Resistance R0 DIN EN 60751 DIN EN 60751 Plastic Bag
1996-07 2009-05
Class 1/3 B F 0.1 32 208 551
100 Ohm at 0°C Class A F 0.15 32 208 550
Class B F 0.3 32 208 548
500 Ohm at 0°C Class B F 0.3 32 208 706
Class 1/3 B F 0.1 32 208 707
1000 Ohm at 0°C Class A F 0.15 32 208 572
Class B F 0.3 32 208 571
The measuring point for the nominal resistance is defined at 8mm from the end of the sensor body.

Specification DIN EN 60751 (according to IEC 751)

Temperature range -70°C to +500°C (continuous operation)


(temporary use to 550°C possible)
Tolerance Class B: -70°C to +500°C
Tolerance Class A: -50°C to +300°C
Tolerance Class 1/3 B: 0°C to +150°C

Temperature coefficient TC = 3850 ppm/K

Leads Pt clad Ni- wire


Recommend connection technology:
Welding, Crimping and Brazing

Lead lengths (L) 10mm ±1mm

Long-term stability max. R0-drift 0.04% after 1000h at 500°C

Vibration resistance at least 40g acceleration at 10 to 2000 Hz,


depends on installation

Shock resistance at least 100g acceleration with 8ms half sine


wave, depends on installation

Environmental conditions unhoused for dry environments only

Insulation resistance > 100 M at 20°C; > 2 M at 500°C

Self heating 0.4 K/mW at 0°C

Response time water current (v= 0.4m/s): t0.5 = 0.05s


t0.9 = 0.15s
air stream (v= 2m/s): t0.5 = 3.0s
t0.9 = 10.0s

Measuring current 100: 0.3 to 1.0mA


500: 0.1 to 0.7mA
1000: 0.1 to 0.3mA
(self heating has to be considered)

Note Other tolerances, values of resistance and wire


lengths are available on request.
We reserve the right to make alterations and technical data printed. All technical data serves as a guideline and does not guarantee
particular properties to any products.

Heraeus Sensor Technology GmbH, Reinhard- Heraeus- Ring 23, 63801 Kleinostheim, Germany
Phone: +49 (0) 6181/35-8098, Fax: +49 (0)6181/35-8101, E-Mail: [email protected] Web: www.heraeus-sensor-technology.com

Name of document: 30910015 Index B


Status: 06/2010

You might also like