ELECTRICAL NOTES:

1.0 GENERAL REQUIREMENTS

1.1 ALL WORKS HERE SHALL BE DONE AND COMPLY WITH THE PROVISIONS OF LATEST PHILIPPINE ELECTRICAL CODE RULES AND REGULATIONS OF THE
LOCAL POWER COMPANY AND EXISTING LOCAL AUTHORITIES CONCERN IN THE ENFORCEMENT OF
ELECTRICAL LAWS AND ORDINANCES.

1.2 POWER SERVICE SHALL BE SINGLE - PHASE, 220 VOLTS, 60Hz

1.3 ELECTRICAL WORKS SHALL BE DONE UNDER THE DIRECT SUPERVISION OF A DULY LICENSED ELECTRICAL ENGINEER OR MASTER ELECTRICIAN.

1.4 ALL MATERIALS TO BE INSTALLED SHALL BE BRAND NEW AND OF THE APPROVED TYPE FOR THE PURPOSE.

1.5 MINIMUM SIZE OF CABLE AND CONDUIT SHALL BE 3.5mm THWN AND 15mm O EMT OR RIGID PVC CONDUIT.

1.6 PANEL BOARD SHALL BE MADE OF CODE GAUGED GALVANIZED STEEL CABINET WITH GUTTER ON ALL SIDES. DOORS SHALL BE FURNISHED WITH
HINGES, DOOR STOP AND LOCK WITH KEYS.

1.7 SWITCHES OF LIGHTING FIXTURES AND RECEPTACLE OUTLET SHALL BE HEAVY DUTY, INDUSTRIAL TYPE HOUSING MADE OF COPPER FREE ALUMINUM.

1.8 ALL SPLICES SHALL BE ELECTRICALLY AND MECHANICALLY CONNECTED.

LOCATION MAP
5.00 DRAWN NOT TO SCALE

3.00 2.00
SINGLE LINE DIAGRAM
M POWER SOURCE

2-14.00 mm 2
THWN CW
1.50

40 AT,
LEGEND:
S1
MAIN PB
4.00

PANEL BOARD S1 ONE GANG SWITCH

5.20

CONVENIENCE OUTLET S2 TWO GANG SWITCH

CKT 1 CKT 2
3.70

20A 20A
S1 1
8.00

8.00

PB 30W LED COMPACT LAMP PB CIRCUIT HOMERUN

CKT 3 15A
2.80

S1
4.00

PB
1
PB ground
2.80

S2
1.20

PB
PB 2
3

SCHEDULE OF LOADS :
Panel Board 1-PHASE 2-WIRE 220 VOLTS
CURRENT CIRCUIT BREAKERS SIZE OF CONDUCTOR SIZE OF CONDUIT
CKT. NO. LOAD DESCRIPTION LOAD (W) KAIC
2.50 2.50 (A) AT AF POLE MM2 THHN IN MM 2
1 3 C.O. 600.00 2.72 20 2 2-3.50 15
5.00
2 3 C.O. 600.00 2.72 20 2 2-3.50 15
3 6 L.O. 180.00 0.81 15 2 2-3.50 15
ELECTRICAL PLAN
SCALE 1:100 M.
TOTAL 1,380.00 6.25 40 AT BOLTED 2-14.00 25
FEEDER COMPUTATION:
IFL @ 80% DF = [6.25] x 0.80 = 5 AMPS
USE: 2-14.00 MM 2 THHN CU WIRE IN 25 MMØ RSC
PROTECTION: USE: 40 AT, 40 AF, 2P, 220 V MAIN CB

SEAL PRC. NO. DESIGN PROFESSIONAL : PROJECT TITLE : APPROVED BY : SHEET CONTENTS : SHEET NO.
VALIDITY
PTR. NO. PROPOSED ONE-STOREY RESIDENTIAL BUILDING
JERRY D. ROMO
SPS. CHERRY ANN G. ROMO AS-SHOWN ABOVE
05
DATE PROF. ELECTRICAL ENGINEER OWNER
TIN ADDRESS : LOCATION : BRGY. AIRPORT, ORMOC CITY ADDRESS : BRGY. AIRPORT, ORMOC CITY 05