Sure, here are some multiple-choice questions on various topics within electrical engineering:
### Question 1: Ohm's Law
**What is the formula for Ohm's Law?**
A. \( V = IR \)
B. \( P = IV \)
C. \( E = mc^2 \)
D. \( V = I/R \)
**Answer:** A. \( V = IR \)
### Question 2: Power in Electrical Circuits
**What is the power dissipated in a resistor if the current through it is 2 A and the resistance is 4
ohms?**
A. 4 W
B. 8 W
C. 16 W
D. 32 W
**Answer:** C. 16 W
( \( P = I^2R = 2^2 \times 4 = 16 \) )
### Question 3: Capacitors
**Which of the following is true about capacitors in series?**
A. The total capacitance is the sum of the individual capacitances.
B. The total capacitance is the product of the individual capacitances.
C. The total capacitance is the sum of the reciprocals of the individual capacitances.
D. The total capacitance is equal to the largest individual capacitance.
**Answer:** C. The total capacitance is the sum of the reciprocals of the individual capacitances.
### Question 4: Inductors
**What is the unit of inductance?**
A. Farad
B. Ohm
C. Henry
D. Tesla
**Answer:** C. Henry
### Question 5: Diodes
**What is the primary function of a diode?**
A. To store electrical energy
B. To convert AC to DC
C. To allow current to flow in one direction only
D. To resist the flow of current
**Answer:** C. To allow current to flow in one direction only
### Question 6: Transformers
**A transformer with a primary voltage of 240 V and a turns ratio of 10:1 will have a secondary
voltage of:**
A. 24 V
B. 120 V
C. 240 V
D. 480 V
**Answer:** A. 24 V
### Question 7: Operational Amplifiers
**What is the ideal open-loop gain of an operational amplifier?**
A. 0
B. 1
C. 100
D. Infinity
**Answer:** D. Infinity
### Question 8: Kirchhoff's Voltage Law (KVL)
**Kirchhoff's Voltage Law states that:**
A. The sum of currents entering a junction equals the sum of currents leaving the junction.
B. The sum of all voltages around a closed loop equals zero.
C. The total resistance in a series circuit is the sum of the individual resistances.
D. The total voltage in a parallel circuit is the same as the voltage of one branch.
**Answer:** B. The sum of all voltages around a closed loop equals zero.
### Question 9: AC Circuits
**In an AC circuit, the relationship between voltage and current is determined by:**
A. Resistance only
B. Capacitance only
C. Inductance only
D. Impedance
**Answer:** D. Impedance
### Question 10: Digital Logic
**Which of the following is a basic logic gate?**
A. AND gate
B. OR gate
C. NOT gate
D. All of the above
**Answer:** D. All of the above
Would you like more questions on a specific topic or additional details on any of these questions?
