Scribd
Upload
15 views1 page

Attachment-1 - Water Analysis (Service Water Analysis)

MEW Service Water Analysis

Uploaded by

abuwaquase
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
15 views1 page

Attachment-1 - Water Analysis (Service Water Analysis)

MEW Service Water Analysis

Uploaded by

abuwaquase
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 1
Service water analysi ‘The following analysis ofthe service (desalinated) water supplied from the connection to SPS is given below for information only. The Contractor at his own cost shall be responsible to obtain sufficient samples and make analysis of the plant service water for his use. Accordinaly the Contractor shall be responsible to include any modification required for his plant and equipment, the total cost of which shall be considered as included in his total offered contract price without any reservation in this respect Desalinated water analysis Normal Nogtal lctcty conduct mero ohms @ 00 ‘Total dissolved solids (based on 0.60 ppm 30 {micro onms, PH 6-65 Free causte (#8 NaOH) pen i Total caustic (as NaOH) ppm 4 Total chloride (as Cl ions) ppm 20 Total alkalinity (as CaCO) pm 10 Total sulphate(as SO.) ppm 5 Total hardness (as CaCOs) Pem 10 Free carbon dioxide (as COz) ppm 0.10 Total iron pm 010 Total silica (SiO) pm 010 Total ammoniacle nitrogen (free and saline) a 20 as NHs 5.1.6.7.3 Towns water analysis Towns water (potable water)'s supplied to the site via the municipal system. The typical analysis of the water is as below however it should be noted thatthe water is Chlorinated, and on occasions this can be at high levels. The Contractor at his own Cost is responsible for checking and confirming the analysis of the towns water {potable water) without any reservation in this respect. Total dissolved solid TDS (max) ppm 320-400 Total Alkalinity T Alkali as CaCod ppm 80-100 Chlaride Ton CF pm 60-80 Sulphate SOF ppm 40-60 Carbon Dioxide Coz Pem 18-3600 Total Iron Fe ppm 015 Silica ‘SiOz ppm W515 Caustic ‘OF Free) ppm 0 Caustic ‘OF (Total) pm a Total Hardness T Hard pm 700-160, Conductivity Cond usicm 400 - 500 PH pH range ppm 72-80 Specification No. MEW / SCCGT-2 87 Contractor’ Initial and Stamp

You might also like