0% found this document useful (0 votes)
20 views1 page

FR Par10 X ZZ Bwe SD M 55008

drawing

Uploaded by

Roman Mihailiuc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
20 views1 page

FR Par10 X ZZ Bwe SD M 55008

drawing

Uploaded by

Roman Mihailiuc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

A0 General Notes:

1. All dimensions are in millimeters.


2. These drawings shall be read in conjunction with schematics,
services layouts, specifications, relevant Architects, Structural
& Fire Engineers drawings.
3. All dimensions shall be checked on site prior to fabrication,
order or delivery.
CHW 4. Final dimensions of all equipment, materials & fittings shall be
DISTRIBUTION checked by the mechanical contractor prior to order/delivery
to site.
5. The mechanical contractor shall be responsible
for co-ordination of services on site.
6. The general contractor shall be responsible for producing a
full set of combined co-ordinated services working drawings.
PT BP
P03 VALV
Legend:
DC Isolation Valve Drain Cock
VALV
DC
R1_310 Chiller Plantroom VALV Imersion Temperature
PT BP Union
Sensor
SIDESTREAM FILTRATION
DC
PAR10_R1_310_SSFU01 CHW Fixed Orifice
Temperature Indicator
DISTRIBUTION FODRV Double Regulating
TI

Valve
FT
BP Binder Point Energy Flow Meter
VACCUUM
FUTURE CONNECTION VALVE DETAIL
DEGASSER (DETAIL G)
FIL
PAR10_R1_310_VD01 Strainer Motor with Variable
VSD
(Water Filter) Speed Drive
PT PT FC
NRV Flexible EXPJ Expansion Joint
Connection

R1 Pressure (Flow) Switch


Connection to PAR10_R0_001_LCGM03. for BMS Monitoring only
Connection to PAR10_R0_001_LCGM01. Connection to PAR10_R0_001_LCGM02.
CHW - Ø25 mm CHW - Ø25 mm For continuation refer to For continuation refer to For continuation refer to
CHW - Ø15 mm FR-PAR10-X-ZZ-BWE-SD-M-55006 FR-PAR10-X-ZZ-BWE-SD-M-55006 FR-PAR10-X-ZZ-BWE-SD-M-55006 Circulation Pump

B CHW - Ø125 mm B CHW - Ø125 mm P03


P03 Non Return Valve
P03 Flowrate - 16.93 l/s P03 Flowrate - 16.93 l/s (Check Valve)
VALV VALV VALV VALV AV AV AV NRV
BP BP BP DC BP DC
VALV VALV VALV VALV VALV
3 Way Modulating
Control Valve
RISER R41 VALV VALV VALV VALV VALV RISER R40
BP BP BP AV BP DC AV OP
CHW - Ø150 mm CHW - Ø150 mm Orifice Plate
P03 VALV VALV
P03
R0 BP BP Safety Valve
SV

AV
Automatic Vent

Chilled Water Flow (20°C)


Chilled Water Return (32°C)
Chilled Water Flow (32°C)
Chilled Water Return (44°C)
Non Active Circuit

L5
Note 1
Static expansion vessel to be normally closed during normal LCGM
operation. Vessel to be opened only when LCGM is isolated from ring
main and not connected to live system.

Note 2
Now Future

125Ø
L3 VALV

Spool
Piece
M

750
VALV
CHW - Ø100 mm CHW - Ø100 mm CHW - Ø100 mm
CHW - Ø125 mm Ring
Flowrate - 5.66 l/s Flowrate - 5.66 l/s Flowrate - 5.66 l/s
BP BP BP BP

125Ø
VALV VALV VALV VALV VALV VALV VALV VALV District
Heating
VALV VALV VALV VALV VALV VALV VALV VALV PHE
BP BP BP BP
VALV VALV VALV VALV VALV VALV
REFER TO DETAIL G PT PT
DC DC DC DC DC DC Note 3
CHW - Ø150 mm
VALV VALV The tag numbers shown are non-specific to a single LCGM and the
BP BP BP BP BP BP Normal Flowrate - 16.93 l/s
Customer CDU Connection Customer CDU Connection Customer CDU Connection 'XXX' will be for different room and will therefore require different LCGM
Max. Flowrate - 33.86 l/s
Customer CDU Connection Point No. 2 c/w Temperature Point No. 3 c/w Temperature Point No. 4 c/w Temperature numbers too. See layout drawing FR-PAR10-1-R1-BWE-LA-M-55001
Point No. 1 c/w Temperature and Pressure Sensors and Pressure Sensors and Pressure Sensors for all unique equipment tag numbers.
CHW - Ø150 mm and Pressure Sensors on flow and return. on flow and return. on flow and return.
PT

PT

PT

PT

PT

PT
Normal Flowrate - 16.93 l/s BP BP on flow and return. Note 4
Max. Flowrate - 33.86 l/s
(Refer to Note 6) (Refer to Note 6) (Refer to Note 6) Please note there are 4 connection points per water type on each
REFER TO
single dry cooler. Each dry cooler has 2xDN80 connections.This
DETAIL G
REFER TO DETAIL G means the flow to each dry cooler has 4xDN80 connections and
Flow Control Valve
Temporary works by Aggreko Flow Control Valve Flow Control Valve return flow has 4xDN80 connections.

01

01
01

01

01

01
TI

TI
VALV
TI

TI

TI

TI
COMMISSIONING LOADS (PROVIDED BY MERCURY) (PROVIDED BY MERCURY)
(PROVIDED BY MERCURY) Butterfly Valve Butterfly Valve Butterfly Valve VALV
VALV VALV ELEC - BOILER 20%EG ELEC - BOILER 20%EG Note 5
SYSTEM PRESSURE DROPS @ 100% LOAD 5.66l/s 5.66l/s Customer CDU Connection VALV
Customer CDU Connection Point No. 5 c/w Temperature Contractor to allow for providing temporary bunding arrangement
FLOW RATE (L/S) PRESSURE DROP (KPa) 44°C 44°C
VALV Point No. 12 c/w Temperature 266.67kW 266.67kW and Pressure Sensors below the temporary works required as part of commissioning.
VALV CONNECTION POINT NO. 2 (266.67kW BLR) 5.66 120 on flow and return. VALV
and Pressure Sensors
CHW - Ø100 mm on flow and return. CONNECTION POINT NO. 3 (266.67kW BLR) 5.66 120 VALV Note 6
DRAIN
DRAIN
DRAIN
DRAIN
P03
(Typical) VALV VALV CONNECTION POINT NO. 4 (266.67kW BLR) 5.66 120 VALV PIC valve to be provided for temporary/commissioning works.
EXPANSION VESSEL EXPANSION VESSEL
DC DC
Automatic controls specialist to arrange temporary controls signal to
CONNECTION POINT NO. 7 (266.67kW BLR) 5.66 120 VALV allow for adjustment during commissioning. Valve to be removed
VALV
CONNECTION POINT NO. 8 (266.67kW BLR) 5.66 120 VALV following commissioning.
CONNECTION POINT NO. 9 (266.67kW BLR) 5.66 120 DRAIN DRAIN

VALV
TOTAL (1600kW)
VALV VALV
BP BP PIPEWORK PRESSURE DROPS @ 100% LOAD
20%EG ELEC - BOILER
LENGTH (m) PRESSURE DROP (KPa) 5.66l/s
44°C PAR10
PERMANENT TBC TBC
266.67kW CHW - Ø125 mm Ring
TEMPORARY HOSE TBC TBC

ASSUMPTIONS: DRAIN
DRAIN

CHW - Ø125 mm Ring 6KPA PRESSURE DROP ALLOWANCE THROUGH ELECTRIC BOILERS. FINAL
P03
EXPANSION VESSEL
PRESSURE DROP TO BE CONFIRMED BY SUPPLIER/CONTRACTOR.
COOLING LOAD DISTRIBUTION
(FINAL ARRANGEMENT TBC WITH CLIENT - HYDRAULIC MODEL PROVISION )
DRAIN PT
SYSTEM PRESSURE DROPS @ 100% LOAD
FLOW RATE (L/S) PRESSURE DROP (KPa) KEY PLAN
PT
CONNECTION POINT NO. 3 (300kW CDU) 6.36 120
Rev Date Details By / App
CONNECTION POINT NO. 4 (375kW CDU) 7.92 120
CONNECTION POINT NO. 7 (375kW CDU) PT
7.92 120
CONNECTION POINT NO. 8 (300kW CDU) 6.36 120
PT
CONNECTION POINT NO. 9 (250kW CDU) 5.3 120
TOTAL (1600kW)

P03 BP BP P03 05/10/23 STAGE 4 ISSUE JB / RL


P02 01/08/23 STAGE 4 ISSUE JB / RL
VALV VALV P01 05/05/23 ISSUED FOR COMMENT JB / RL
VALV
ELEC - BOILER 20%EG ELEC - BOILER 20%EG ELEC - BOILER 20%EG Drawing Status:
5.66l/s 5.66l/s 5.66l/s
VALV VALV VALV
REFER TO DETAIL G
44°C
266.67kW
44°C
266.67kW
44°C
266.67kW
STAGE 4
BP BP
VALV Main Contractor:
VALV VALV DRAIN
DRAIN
DRAIN
DRAIN
DRAIN
DRAIN
VALV

Customer CDU Connection EXPANSION VESSEL EXPANSION VESSEL EXPANSION VESSEL Customer CDU Connection VALV
VALV Point No. 11 c/w Temperature Point No. 6 c/w Temperature
VALV Flow Control Valve and Pressure Sensors
and Pressure Sensors
(PROVIDED BY MERCURY) on flow and return. VALV
on flow and return.
DRAIN DRAIN DRAIN
VALV VALV Butterfly Valve Butterfly Valve Butterfly Valve VALV Mercury House, Sandyford Ind. Estate, Dublin 18, Ireland
VALV E: [email protected] | T: +353 1 2163000 | www.mercuryeng.com
Flow Control Valve Flow Control Valve
01

01

01

01

01

01
TI

TI

TI
TI

TI

(PROVIDED BY MERCURY) (PROVIDED BY MERCURY) TI


REFER TO
DETAIL G
(Refer to Note 6) (Refer to Note 6) (Refer to Note 6)
P03 Customer CDU Connection Black & White Engineering
PT

PT

PT

PT

PT

PT

Point No. 10 c/w Temperature Customer CDU Connection Customer CDU Connection Customer CDU Connection Suite 1, West Wing, Verdant,
and Pressure Sensors Point No. 9 c/w Temperature Point No. 8 c/w Temperature Point No. 7 c/w Temperature 2 Redheughs Rigg, South Gyle,
and Pressure Sensors and Pressure Sensors and Pressure Sensors Edinburgh EH12 9DQ
on flow and return. United Kingdom
on flow and return. on flow and return. on flow and return. BP BP
REFER TO DETAIL G VALV VALV BP BP BP BP BP BP
e: [email protected]
P03 DC DC DC DC DC DC
PT PT
VALV VALV VALV VALV VALV VALV Client:
BP BP BP BP INTERXION
VALV VALV VALV VALV VALV VALV VALV VALV
Project:

VALV VALV VALV VALV VALV VALV VALV VALV PAR10


BP BP BP BP
CHW - Ø125 mm Ring Drawing Title:
CHW - Ø100 mm CHW - Ø100 mm CHW - Ø100 mm Mechanical Services
Flowrate - 5.66 l/s Flowrate - 5.66 l/s Flowrate - 5.66 l/s LCGM Commissioning Schematic
Level 1

Drawn By: Designed By: Checked By:

JR JB RL
Scale: Date:
NTS @ A0 05/10/2023
Project No. Drawing No. Revision: Status:
P20165 FR-PAR10-X-ZZ-BWE-SD-M-55008 P03 S4
Country - Project - Phase - Level - Originator - Type - Discipline - Number

© Copyright Black & White Engineering

You might also like