https://www.phoenixcontact.

com/gb/products/2814731

Current transducers - MCR-S-1-5-UI-SW-DCI-NC - 2814731

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)

MCR current transducer, programmable and configurable, for measuring direct, alternating and distorted
currents, with relay and transistor output, input current 0 ... 0.2 A to 0 ... 11 A, unconfigured

The illustration shows version

MCR-S-1-5-UI-DCI

Why buy this product

Device can be set via DIP switches or MCR/PI-CONF-WIN configuration software
3-way isolation
True r.m.s. value measurement

Key Commercial Data

Packing unit 1 pc

GTIN

Weight per Piece (excluding packing) 149.08 g

Custom tariff number 85437090
Country of origin Germany

Technical data
Note
EMC: class A product, see manufacturer's declaration in the download
Utilization restriction
area

Dimensions
Width 22.5 mm
Height 99 mm
Depth 114.5 mm

Ambient conditions
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C

16/02/2016 Page 1 / 6
https://www.phoenixcontact.com/gb/products/2814731

Current transducers - MCR-S-1-5-UI-SW-DCI-NC - 2814731

Technical data
Ambient conditions
Degree of protection IP20

Input data
Input Current measuring input
Number of inputs 3
Configurable/programmable Yes, unconfigured
Input current range 0 A ... 11 A (AC/DC)
Operate threshold 2 % (of measuring range nominal value 1/5/10 A)
Setting range for min. input current 0 A ... 0.2 A
Setting range for max. input current 0 A ... 11 A
Impulse form AC, DC or distorted currents
Overload capacity 2 x IN (continuous)
Surge strength 20 x IN (1 s)
Frequency measuring range 15 Hz ... 400 Hz
Connection method Screw connection

Output data
Output name Voltage output / current output
Configurable/programmable Yes, unconfigured
Voltage output signal 0 V ... 10 V
2 V ... 10 V
-10 V ... 10 V
0 V ... 5 V
1 V ... 5 V
-5 V ... 5 V
10 V ... 0 V
10 V ... 2 V
10 V ... -10 V
5 V ... 0 V
5 V ... 1 V
5 V ... -5 V
Current output signal 0 mA ... 20 mA
4 mA ... 20 mA
20 mA ... 0 mA
20 mA ... 4 mA
Load/output load voltage output > 10 kΩ
Load/output load current output < 500 Ω

Switching output
Output name Relay output
Contact type 1 PDT
Contact material AgSnO, hard gold-plated

16/02/2016 Page 2 / 6
https://www.phoenixcontact.com/gb/products/2814731

Current transducers - MCR-S-1-5-UI-SW-DCI-NC - 2814731

Technical data
Switching output
Maximum switching voltage 30 V AC
36 V DC
250 V AC (when the gold layer is destroyed)
Limiting continuous current 50 mA
2 A (when the gold layer is destroyed)
Output name Transistor output, pnp
Output voltage range 19 V ... 29 V (supply voltage - 1 V)
Continuous load current 80 mA (Not short-circuit proof)
Setting range of the threshold value 1 % ... 110 %
Setting range of the response delay 0.1 s ... 20 s
Status display Yellow LED

Power supply
Supply voltage range 20 V DC ... 30 V DC
Max. current consumption < 50 mA (without load)

Connection data
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Stripping length 8 mm
Screw thread M3

General
Maximum transmission error < 0.5 % (of nominal range value under nominal conditions)
Temperature coefficient, typical < 0.025 %/K
Step response (10-90%) 330 ms (with AC)
40 ms (with DC)
Status display Green LED
Overvoltage category III
Degree of pollution 2
Rated insulation voltage 300 V AC (to earth)
Test voltage input/output 4 kV (50 Hz, 1 min.)
Test voltage input/power supply 4 kV (50 Hz, 1 min.)
Test voltage output/power supply 500 V (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2

16/02/2016 Page 3 / 6
https://www.phoenixcontact.com/gb/products/2814731

Current transducers - MCR-S-1-5-UI-SW-DCI-NC - 2814731

Technical data
General
Color green
Housing material Polyamide PA non-reinforced
Mounting position any
Conformance CE-compliant
UL, USA / Canada Class I, Zone 2, AEx nC IIC T6, Ex nC IIC T6

Standards and Regulations

Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2
Connection in acc. with standard CUL
Low Voltage Directive Conformance with Low Voltage Directive 2006/95/EC
Conformance CE-compliant
UL, USA / Canada Class I, Zone 2, AEx nC IIC T6, Ex nC IIC T6

Classifications
eCl@ss

eCl@ss 4.0 27200303

eCl@ss 4.1 27200303
eCl@ss 5.0 27200303
eCl@ss 5.1 27200303
eCl@ss 6.0 27200303
eCl@ss 7.0 27142316
eCl@ss 8.0 27210123

ETIM

ETIM 2.0 EC001440

ETIM 3.0 EC001440
ETIM 4.0 EC001440
ETIM 5.0 EC002475

UNSPSC

UNSPSC 6.01 30211506

UNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 39121008

Approvals
Approvals

16/02/2016 Page 4 / 6
https://www.phoenixcontact.com/gb/products/2814731

Current transducers - MCR-S-1-5-UI-SW-DCI-NC - 2814731

Approvals

Approvals

UL Recognized / cUL Recognized / EAC / cULus Recognized

Ex Approvals

UL Listed / cUL Listed / cULus Listed

Approvals submitted

Approval details

UL Recognized

cUL Recognized

EAC

cULus Recognized

Accessories
Accessories
Arrester test system

Conductor - CM-KBL-RS232/USB - 2881078

Connecting cable D-9-SUB to USB, with adapter D-9-SUB to D-25-SUB.

Configuration and diagnostics

16/02/2016 Page 5 / 6
https://www.phoenixcontact.com/gb/products/2814731

Current transducers - MCR-S-1-5-UI-SW-DCI-NC - 2814731

Accessories

Configuration software - MCR/PI-CONF-WIN - 2814799

PI/MCR configuration software for programming PI-EX-RTD..., PI-EX-TC..., MCR-T..., MCR-PSP..., MCR-f..., and
MCR-S... modules. This software is available to download free of charge at - phoenixcontact.com.

Programming adapter

Adapter cable - MCR-TTL-RS232-E - 2814388

Software adapter cable (Stereo jack connector/D-SUB 25-pos.), 1.2 m length, for programming MCR-T-..., MCR-S-...
and MCR-f-... modules

Drawings

Dimensional drawing Dimensional drawing

99 22,5

99 22,5
114,5

114,5

Circuit diagram
10A 5 ADC DAC
OUT
5A 6 µC I
1A 9 O UT I
7
10 O UT U
SPAN

8 DAC
11 GND 2
U
IN 12 GND 2
TIME POINT ZERO

Po
wer
13 24VDC
=
14 GND 1
12 1
SET

11 2 15 SW
14 3
16 GND 1

NC 4

OUT

Phoenix Contact 2016 © - all rights reserved

http://www.phoenixcontact.com

16/02/2016 Page 6 / 6