Intel Wifi Adapter Information Guide
Intel Wifi Adapter Information Guide
With your WiFi network card, you can access WiFi networks, share files or printers, or even share your Internet
connection. All these features can be explored using a WiFi network in your home or office. This WiFi network
solution is designed for both home and business use. Additional users and features can be added as your networking
needs grow and change.
This guide contains basic information about Intel adapters. Intel® wireless adapters enable fast connectivity without
wires for desktop and notebook PCs.
Adapter Settings
Regulatory and Safety Information
Specifications
Support
Warranty
Depending on the model of your Intel WiFi adapter, your adapter is compatible with 802.11a, 802.11b, 802.11g,
802.11n, 802.11ac and 802.11ax wireless standards. Operating at 5GHz or 2.4GHz frequency, you can now connect
your computer to existing high-speed networks that use multiple access points within large or small environments.
Your WiFi adapter maintains automatic data rate control according to the access point location and signal strength to
achieve the fastest possible connection.
Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any
commitment to update the information contained herein.
Intel wireless LAN adapters are engineered, manufactured, tested, and quality checked to ensure that they meet all
necessary local and governmental regulatory agency requirements for the regions that they are designated and/or
marked to ship into. Because wireless LANs are generally unlicensed devices that share spectrum with radars,
satellites, and other licensed and unlicensed devices, it is sometimes necessary to dynamically detect, avoid, and
limit usage to avoid interference with these devices. In many instances Intel is required to provide test data to prove
regional and local compliance to regional and governmental regulations before certification or approval to use the
product is granted. Intel's wireless LAN's EEPROM, firmware, and software driver are designed to carefully control
parameters that affect radio operation and to ensure electromagnetic compliance (EMC). These parameters include,
without limitation, RF power, spectrum usage, channel scanning, and human exposure.
For these reasons Intel cannot permit any manipulation by third parties of the software provided in binary format
with the wireless LAN adapters (e.g., the EEPROM and firmware). Furthermore, if you use any patches, utilities, or
code with the Intel wireless LAN adapters that have been manipulated by an unauthorized party (i.e., patches,
utilities, or code (including open source code modifications) which have not been validated by Intel), (i) you will be
solely responsible for ensuring the regulatory compliance of the products, (ii) Intel will bear no liability, under any
theory of liability for any issues associated with the modified products, including without limitation, claims under the
warranty and/or issues arising from regulatory non-compliance, and (iii) Intel will not provide or be required to assist
in providing support to any third parties for such modified products.
Note: Many regulatory agencies consider Wireless LAN adapters to be "modules", and accordingly, condition system-
level regulatory approval upon receipt and review of test data documenting that the antennas and system
configuration do not cause the EMC and radio operation to be non-compliant.
Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.
© Intel Corporation.
April 2023
Back to Contents
Adapter Settings
The Advanced tab displays the device properties for the WiFi adapter installed on your computer.
How to Access
Double-click on the Intel WiFi adapter in the Network adapters section of the Device Manager and select the
Advanced tab.
A description of the WiFi adapter settings on the Advanced tab can be found here:
https://www.intel.com/content/www/us/en/support/articles/000005585/network-and-i-o/wireless-networking.html
Back to Top
Back to Contents
Trademarks and Disclaimers
Back to Contents
Regulatory Information
This section provides regulatory information for the following wireless adapters:
NOTE: Due to the evolving state of regulations and standards in the wireless LAN field (IEEE 802.11 and similar
standards), the information provided herein is subject to change. Intel Corporation assumes no responsibility for errors
or omissions in this document.
NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above.
Safety Notices
The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF)
electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure requirements found in
FCC Part 2, 15C, 15E along with guidance from KDB 447498, KDB 248227 and KDB 616217. Proper operation of this radio according
to the instructions found in this manual will result in exposure substantially below the FCC’s recommended limits.
Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an
explosive environment unless the transmitter has been modified to be qualified for such use.
Antenna Warnings
Warning: The wireless adapter is not designed for use with high-gain directional antennas.
Caution: Regulations of commercial airline operators may prohibit airborne operation of certain electronic devices equipped with
radio-frequency wireless devices (wireless adapters) because their signals could interfere with critical aircraft instruments.
Caution: 60 GHz/802.11ad equipment is not permitted on aircraft per FCC §15.255. OEM and host integrators should consider
this FCC rule in host devices.
Caution: Operation of transmitter in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned
aircraft systems
Safety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or other
devices in the wireless network.
Local Restrictions on 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, 802.11ac, and 802.16e Radio Usage
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, 802.11ac, and 802.16e
wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, 802.11ac, and
802.16e products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of
designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for
which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the
country of use. The device transmit power control (TPC) interface is part of the Intel® PROSet/Wireless WiFi Connection Utility
Software. Operational restrictions for Equivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any
Wireless Interoperability
The wireless adapter is designed to be interoperable with other wireless LAN products that are based on direct sequence spread
spectrum (DSSS) radio technology and to comply with the following standards:
The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the
wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The
wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards
and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of
scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the
wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization.
Examples of such situations may include:
If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport,
for example), you are encouraged to ask for authorization to use the adapter before you turn it on.
REGULATORY INFORMATION
No configuration controls are provided for Intel® wireless adapters allowing any change in the frequency of operations outside the
FCC grant of authorization for U.S. operation according to Part 15.407 of the FCC rules.
This wireless adapter complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:
This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in
accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no
guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful
interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged
to try to correct the interference by taking one or more of the following measures:
Reorient or relocate the receiving antenna of the equipment experiencing the interference.
Increase the distance between the wireless adapter and the equipment experiencing the interference.
Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment
experiencing the interference is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructions as described in
the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations.
This device has been safety approved as a component and is for use only in complete equipment where the acceptability of the
combination is determined by the appropriate safety agencies. When installed, consideration must be given to the following:
It must be installed into a compliant host device meeting the requirement of UL/EN/IEC 62368-1 including the general
provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure).
The device shall be supplied by a SELV source when installed in the end-use equipment.
A heating test shall be considered in the end-use product for meeting the requirement of UL/EN/IEC 62368-1.
Low Halogen
Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as
purchased components on the finished assembly meet JS-709 requirements, and the PCB / substrate meet IEC 61249-2-21
requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment.
Japan
5GHz 帯は室内でのみ使用のこと
Korea
해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음.
해당 무선 설비는 5150-5250MHz 대역에서 실내에서만 사용할 수 있음.
Mexico
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
operación no deseada.
Taiwan Region
取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影
響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前述合法通信,指依電信管理法規定作業之無線 電通信。
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
應避免影響附近雷達系統之操作。高增益指向性天線只得應用於固定式點對點系統。
Radio Approvals
To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio
type number that is printed on the identification label of your device is listed in the manufacturer's OEM Regulatory Guidance
document.
A list of countries requiring regulatory markings is available. Note that the lists include only countries requiring marking but not all
certified countries. To find the regulatory country marking information for your adapter, perform these steps:
The guidelines described within this document are provided to OEM integrators installing Intel® wireless adapters in notebook and
tablet PC host platforms. Adherence to these requirements is necessary to meet the conditions of compliance with FCC rules,
including RF exposure. When all antenna type and placement guidelines described herein are fulfilled the Intel® wireless adapters
may be incorporated into notebook and tablet PC host platforms with no further restrictions. If any of the guidelines described
herein are not satisfied it may be necessary for the OEM or integrator to perform additional testing and/or obtain additional
approval. The OEM or integrator is responsible to determine the required host regulatory testing and/or obtaining the required host
Intel® wireless adapters are intended for OEMs and host integrators only.
The Intel® wireless adapter FCC Grant of Authorization describes any limited conditions of modular approval.
The Intel® wireless adapters must be operated with an access point that has been approved for the country of operation.
Changes or modification to Intel® wireless adapters by OEMs, integrators or other third parties is not permitted. Any changes
or modification to Intel® wireless adapters by OEMs, integrators or other third parties will void authorization to operate the
adapter.
Brazil: Information to be supplied to the End User by the OEMs and Integrators: "Incorporates product approved by Anatel
under number HHHH-AA-FFFFF." (Intel Module made in China Mainland/Taiwan Region/Brazil).
Antenna Antenna Location 2.4GHz Peak 5.2GHz Peak 5.5GHz Peak 5.7GHz Peak
Type (Main/Aux) Gain in dBi* Gain in dBi* Gain in dBi* Gain in dBi*
PIFA Main
Aux 3.24 3.73 4.77 4.77
MIMO
*All antenna gains include cable loss.
Based upon FCC Knowledge Database publication number 616217 when there are multiple transmitting devices installed in a host
device, an RF exposure transmitting assessment shall be performed to determine the necessary application and test requirements.
OEM integrators must identify all possible combinations of simultaneous transmission configurations for all transmitters and
antennas installed in the host system. This includes transmitters installed in the host as mobile devices (>20 cm separation from
user) and portable devices (<20 cm separation from user). OEM integrators should consult the actual FCC KDB 616217 document
for all details in making this assessment to determine if any additional requirements for testing or FCC approval is necessary.
The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system
incorporating the Intel® wireless adapter, in compliance with local regulations. Host system must be labeled with "Contains FCC ID:
XXXXXXXX", FCC ID displayed on label.
The Intel® wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the
user documentation that comes with the product. Intel Corporation is not responsible for any radio or television interference caused
by unauthorized modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting
cables and equipment other than that specified by Intel Corporation. The correction of interference caused by such unauthorized
modification, substitution or attachment is the responsibility of the user. Intel Corporation and authorized resellers or distributors
are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these
guidelines.
China Mainland:
模块通过型号核准并不代表嵌入或使用该模块的最终设备符合相关无线电管理技术规定或标准,最终设备厂商须对产品的技术特性是否符合无线电管理技术
规定或标准负责
Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11e Radio Usage
The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b,
802.11g and 802.11n products.
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e wireless LAN devices
may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e products are designed for use only
in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these
products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for
verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the
permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.
NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above.
Safety Notices
The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF)
electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure requirements found in
FCC Part 2, 15C, 15E along with guidance from KDB 447498, KDB 248227 and KDB 616217. Proper operation of this radio according
to the instructions found in this manual will result in exposure substantially below the FCC’s recommended limits.
Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an
explosive environment unless the transmitter has been modified to be qualified for such use.
Antenna Warnings
Warning: The wireless adapter is not designed for use with high-gain directional antennas.
Caution: Regulations of commercial airline operators may prohibit airborne operation of certain electronic devices equipped with
radio-frequency wireless devices (wireless adapters) because their signals could interfere with critical aircraft instruments.
Caution: 60 GHz/802.11ad equipment is not permitted on aircraft per FCC §15.255. OEM and host integrators should consider
this FCC rule in host devices.
Caution: Operation of transmitter in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned
aircraft systems
Safety Notices for Other Devices in the Wireless Network: See the documentation supplied with wireless adapters or other
devices in the wireless network.
Local Restrictions on 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, and 802.11ac Radio Usage
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, and 802.11ac wireless
LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, and 802.11ac products are
designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a
user of these products, you are responsible for ensuring that the products are used only in the countries for which they were
intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. The
device transmit power control (TPC) interface is part of the Intel® PROSet/Wireless WiFi Connection Utility Software. Operational
restrictions for Equivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviation from the
permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.
regs.htm[5/23/2023 2:49:23 PM]
Regulatory Information
Wireless Interoperability
The wireless adapter is designed to be interoperable with other wireless LAN products that are based on direct sequence spread
spectrum (DSSS) radio technology and to comply with the following standards:
The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the
wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The
wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards
and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of
scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the
wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization.
Examples of such situations may include:
If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport,
for example), you are encouraged to ask for authorization to use the adapter before you turn it on.
REGULATORY INFORMATION
This wireless adapter is restricted to indoor use due to its operation in the following frequency ranges. 5.85 to 5.895 and 5.925 to
6.425GHz and 6.875GHz to 7.125GHz frequency ranges. No configuration controls are provided for Intel® wireless adapters allowing
any change in the frequency of operations outside the FCC grant of authorization for U.S. operation according to Part 15.407 of the
FCC rules.
This wireless adapter complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:
NOTE: The radiated output power of the adapter is far below the FCC radio frequency exposure limits. Nevertheless, the
adapter should be used in such a manner that the potential for human contact during normal operation is minimized. To
avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 20cm
between you (or any other person in the vicinity), or the minimum separation distance as specified by the FCC grant
conditions, and the antenna that is built into the computer. Details of the authorized configurations can be found at
http://www.fcc.gov/oet/ea/ by entering the FCC ID number on the device.
This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in
accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no
guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful
interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged
to try to correct the interference by taking one or more of the following measures:
Reorient or relocate the receiving antenna of the equipment experiencing the interference.
Increase the distance between the wireless adapter and the equipment experiencing the interference.
Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment
experiencing the interference is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructions as described in
the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations.
This device has been safety approved as a component and is for use only in complete equipment where the acceptability of the
combination is determined by the appropriate safety agencies. When installed, consideration must be given to the following:
It must be installed into a compliant host device meeting the requirement of UL/EN/IEC 62368-1 including the general
provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure).
The device shall be supplied by a SELV source when installed in the end-use equipment.
A heating test shall be considered in the end-use product for meeting the requirement of UL/EN/IEC 62368-1.
Low Halogen
Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as
purchased components on the finished assembly meet JS-709 requirements, and the PCB / substrate meet IEC 61249-2-21
requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Cet appareil se conforme aux normes Canada d'Industrie de RSS permis-exempt. L'utilisation est assujetti aux deux conditions
suivantes: (1) cet appareil ne peut pas causer d'interférences, et (2) cet appareil doit accepter des interférences , y compris des
interférences qui peuvent causer desopérations non désirées de l'appareil.
Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-
GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15GHz to 5.25GHz to
reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary
user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this
device. The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to
5.35 and 5.725 to 5.85GHz frequency range in point-to-point operation. To comply with RF exposure requirements all antennas
should be located at a minimum distance of 20cm, or the minimum separation distance allowed by the module approval, from the
body of all persons.
Attention: l'utilisation d'un réseau sans fil IEEE802.11a est restreinte à une utilisation en intérieur à cause du fonctionnement dans
la bande de fréquence 5.15-5.25 GHz. Industry Canada requiert que ce produit soit utilisé à l'intérieur des bâtiments pour la bande
de fréquence 5.15-5.25 GHz afin de réduire les possibilités d'interférences nuisibles aux canaux co-existants des systèmes de
transmission satellites. Les radars de puissances ont fait l'objet d'une allocation primaire de fréquences dans les bandes 5.25-5.35
GHz et 5.65-5.85 GHz. Ces stations radar peuvent créer des interférences avec ce produit et/ou lui être nuisible. Le gain d'antenne
maximum permissible pour une utilisation avec ce produit est de 6 dBi afin d'être conforme aux limites de puissance isotropique
rayonnée équivalente (P.I.R.E.) applicable dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionnement point-à-point. Pour
se conformer aux conditions d'exposition de RF toutes les antennes devraient être localisées à une distance minimum de 20 cm, ou
la distance de séparation minimum permise par l'approbation du module, du corps de toutes les personnes.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
Selon les règlements de Canada d'Industrie, cet émetteur de radio peut seulement fonctionner en utilisant une antenne du type et
de gain maximum (ou moindre) que le gain approuvé pour l'émetteur par Canada d'Industrie. Pour réduire lesinterférences radio
potentielles avec les autres utilisateurs, le type d'antenne et son gain devraient être choisis de façon à ce que la puissance isotrope
rayonnée équivalente(P.I.R.E.) ne soit pas supérieure à celle qui est nécessaire pour une communication réussie.
European Union
This equipment complies with the essential requirements of the European Union directive 2014/53/EU. See Statements of European
Union Compliance.
To view the European Union Declaration of Conformity for your adapter, perform these steps.
To view additional regulatory information for your adapter, perform these steps:
All products described herein are compliant with the European Union's RoHS Directive.
Intel Corporation Attn: Corporate Quality 2200 Mission College Blvd. Santa Clara, CA 95054-1549 USA
Japan
5GHz 帯は室内でのみ使用のこと
Korea
해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음.
해당 무선 설비는 5150-5250MHz 대역에서 실내에서만 사용할 수 있음.
Mexico
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
operación no deseada.
Morocco
The operation of this product in the radio channel 2 (2417 MHz) is not authorized in the following cities:
Agadir, Assa-Zag, Cabo Negro, Chaouen, Goulmima, Oujda, Tan Tan, Taourirt, Taroudant,Taza.
The operation of this product in the radio channels 4, 5, 6 et 7 (2425 - 2442 MHz) is not authorized in the following cities:
Aéroport Mohamed V, Agadir, Aguelmous, Anza, Benslimane, Béni Hafida, Cabo Negro, Casablanca, Fès, Lakbab, Marrakech,
Merchich, Mohammédia, Rabat, Salé, Tanger, Tan Tan, Taounate, Tit Mellil, Zag.
Pakistan
"PTA APPROVED MODEL"
Taiwan Region
取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影
響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前述合法通信,指依電信管理法規定作業之無線 電通信。
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
應避免影響附近雷達系統之操作。高增益指向性天線只得應用於固定式點對點系統。
Singapore
Radio Approvals
To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio
type number that is printed on the identification label of your device is listed in the manufacturer's OEM Regulatory Guidance
document.
A list of countries requiring regulatory markings is available. Note that the lists include only countries requiring marking but not all
certified countries. To find the regulatory country marking information for your adapter, perform these steps:
Regulatory ID
Europe: Models 3160HMW, 3160NGW, 3160SDW, 3165NGW, 7260SDW, 7260NGW, 7260HMW, 7265D2W, 7265NGW, 8260D2W,
8260NGW, 8260NGWH, 18260NGW
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions (WiFi/BT)
Intel® Wireless Dock Manager 3.x and previous versions (WiGig)
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n mode
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
Bluetooth/BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac mode The low band 5.15 - 5.35 GHz is for indoor use only
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Due to the very small size of the 3165D2W/3165NGW (12x16), the marking has been placed in this user manual because the
product label on the device is considered too small to be readable.
USA:
Model 3165D2W
Canada:
Model 3165D2W
IC: 1000M-3165D2
Japan:
Model 3165D2W
RF: 003-150155
TEL: D150112003
Model 3165NGW
RF: 003-150009
TEL: D150008003
Korea:
Model 3165D2W
MSIP-CRM-INT-3165D2W
Taiwan Region:
Model 3165D2W
China Mainland:
Model 3165D2W
Europe:
Model 3165D2W
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 3165D2W
Singapore:
Model 3165D2W
Argentina:
Model 3165D2W
Model 3165NGW
Due to the very small size of the 3168NGW, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
Japan:
Model 3168NGW
RF: 003-160024
TEL: D160013003
Europe:
Model 3168NGW
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
Bluetooth/BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2
mode receiver
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Argentina:
Model 3168NGW
Due to the very small size of the 7265D2W/7265NGW (12x16), the marking has been placed in this user manual because the
product label on the device is considered too small to be readable.
USA:
Model 7265D2W
Canada:
Model 7265D2W
IC: 1000M-7265D2
Japan:
Model 7265D2W
RF: 003-140134
TEL: D140087003
Model 7265NGW
RF: 003-140018
TEL: D140017003
Korea:
Model 7265D2W
MSIP-CRM-INT-7265D2W
Taiwan Region:
Model 7265D2W
China Mainland:
Model 7265D2W
Australia:
Model 7265D2W
Argentina:
Model 7265D2W
Due to the very small size of the 13100NGW, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
Europe:
Model 13100NGW
Software Version Intel® Wireless Dock Manager 3.x and previous versions
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Singapore:
Model 13100NGW
Due to the very small size of the 17265NGW, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
Europe:
Model 17265NGW
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions (WiFi/BT)
Intel® Wireless Dock Manager 3.x and previous versions (WiGig)
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2
mode receiver
(57 - 64 GHz) 25 dBm EIRP max
IEEE802.11 ad mode
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Singapore:
Model 17265NGW
Due to the very small size of the 8260D2W (12x16), the marking has been placed in this user manual because the product label on
the device is considered too small to be readable.
USA: Model 8260D2W, FCC ID: PD98260D2 (FCC ID without suffix "U" denotes factory installation only);
FCC ID: PD98260D2U (FCC ID with suffix “U” denotes user installation or replacement permitted and supported by bios
locking feature)
Canada:
Model 8260D2W
IC: 1000M-8260D2
Japan:
Model 8260D2W
RF: 003-150094
TEL: D150070003
Korea:
Model 8260D2W
MSIP-CRM-INT-8260D2W
Taiwan Region:
Model 8260D2W
China Mainland:
Model 8260D2W
Australia:
Model 8260D2W
Argentina:
Model 8260D2W
Due to the very small size of the 8260NGWH/8260NGW, the marking has been placed in this user manual because the product label
on the device is considered too small to be readable.
Japan:
Model 8260NGW
RF: 003-150093
TEL: D150069003
Model 8260NGWH
RF: 003-150154
TEL: D150111003
Argentina:
Model 8260NGWH
Argentina:
Model 8260NGW
Due to the very small size of the 8265NGW (22mm x 30mm x 2.4mm), the marking has been placed in this user manual because
the product label on the device is considered too small to be readable.
USA:
Model 8265NGW
FCC ID: PD98265NG (FCC ID without suffix "U" denotes factory installation only)
FCC ID: PD98265NGU (FCC ID with suffix “U” denotes user installation or replacement permitted and supported
by BIOS locking feature)
Canada:
Model 8265NGW
IC: 1000M-8265NG
Japan:
Model 8265NGW
RF 003-160104
TEL D160055003
Korea:
Model 8265NGW
MSIP-CRM-INT-8265NGW
Taiwan Region:
Model 8265NGW
China Mainland:
Model 8265NGW
Europe:
Model 8265NGW/8265D2W
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
Bluetooth
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 8265NGW
Brazil:
Model 8265NGW
03877-16-02198
Argentina:
Model 8265NGW
Singapore:
Model 8265NGW
Pakistan:
Model 8265NGW
Due to the very small size of the 8265D2W (12mm x 16mm x 1.8mm), the marking has been placed in this user manual because
the product label on the device is considered too small to be readable.
USA:
Model 8265D2W
Canada:
Model 8265D2W
IC: 1000M-8265D2
Japan:
Model 8265D2W
RF 003-160129
TEL D160076003
Korea:
Model 8265D2W
MSIP-CRM-INT-8265D2W
Taiwan Region:
Model 8265D2W
China Mainland:
Model 8265D2W
Australia:
Model 8265D2W
Brazil:
Model 8265D2W
03878-16-02198
Argentina:
Model 8265D2W
Singapore:
Model 8265D2W
Pakistan:
Model 8265D2W
Due to the very small size of the 9260NGW (22mm x 30mm x 2.4mm), the marking has been placed in this user manual because
the product label on the device is considered too small to be readable.
USA:
Model 9260NGW
Canada:
Model 9260NGW
IC: 1000M-9260NG
Japan:
Model 9260NGW
RF 003-170125
TEL D170079003
Korea:
Model 9260NGW
MSIP-CRM-INT-9260NGW
Taiwan Region:
Model 9260NGW
China Mainland:
Model 9260NGW
Europe:
Model 9260NGW
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
Bluetooth
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 9260NGW
Singapore:
Model 9260NGW
Argentina:
Model 9260NGW
C-20822
Paraguay:
Model 9260NGW
NR 2017-09-I-0000330
Indonesia:
Model 9260NGW
70981/SDPPI/2020
7965
Due to the very small size of the 9260D2WL (12mm x 16mm x 1.8mm), the marking has been placed in this user manual because
the product label on the device is considered too small to be readable.
USA:
Model 9260D2WL
Canada:
Model 9260D2WL
IC: 1000M-9260D2L
Japan:
Model 9260D2WL
RF: 003-190024
TEL: D190023003
Europe:
Model 9260D2WL
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2
mode receiver
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 9260D2WL
Brazil:
Model 9260D2WL
ANATEL: 05831-17-04423
Singapore:
Model 9260D2WL
Argentina:
Model 9260D2WL
Pakistan:
Model 9260D2WL
Paraguay:
Model 9260D2WL
NR 2019-07-I-0381
Due to the very small size of the 9461NGW (22mm x 30mm x 2.4mm), the marking has been placed in this user manual because
the product label on the device is considered too small to be readable.
USA:
Model 9461NGW
Canada:
Model 9461NGW
IC: 1000M-9461NG
Japan:
Model 9461NGW
RF 003-170204
TEL D170127003
Korea:
Model 9461NGW
MSIP-CRM-INT-9461NGW
Taiwan Region:
Model 9461NGW
China Mainland:
Model 9461NGW
Europe:
Model 9461NGW
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2
mode receiver
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 9461NGW
Singapore:
Model 9461NGW
Argentina:
Model 9461NGW
C-20823
Due to the very small size of the 9461D2W (12mm x 16mm x 1.8mm), the marking has been placed in this user manual because
the product label on the device is considered too small to be readable.
USA:
Model 9461D2W
FCC ID:
PD99461D2
Canada:
Model 9461D2W
IC: 1000M-
9461D2
Japan:
Model 9461D2W
RF 003-170203
TEL
D170126003
Korea:
Model 9461D2W
Taiwan Region:
Model 9461D2W
China Mainland:
Model 9461D2W
Europe:
Model 9461D2W
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2
mode receiver
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 9461D2W
Singapore:
Argentina:
Model 9461D2W
C-20822
Due to the very small size of the 9462NGW (22mm x 30mm x 2.4mm), the marking has been placed in this user manual
because the product label on the device is considered too small to be readable.
USA:
Model 9462NGW
Canada:
Model 9462NGW
IC: 1000M-9462NG
Japan:
Model 9462NGW
RF 003-170245
TEL D170151003
Korea:
Model 9462NGW
R-CRM-INT-9462NGW
Taiwan Region:
Model 9462NGW
China Mainland:
Model 9462NGW
Europe:
Model 9462NGW
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
Bluetooth
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 9462NGW
Singapore:
Model 9462NGW
Due to the very small size of the 9462D2W (12mm x 16mm x 1.8mm), the marking has been placed in this user manual
because the product label on the device is considered too small to be readable.
USA:
Model
9462D2W FCC
ID:
PD99462D2
Canada:
Model 9462D2W
IC: 1000M-9462D2
Japan:
Model 9462D2W
RF 003-170243
TEL D170149003
Korea:
Model 9462D2W
R-CRM-INT-9462D2W
Taiwan Region:
Model 9462D2W
China Mainland:
Model 9462D2W
Europe:
Model 9462D2W
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac The low band 5.15 - 5.35 GHz is for indoor use only
mode
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 9462D2W
Singapore:
Model 9462D2W
Argentina:
Model 9462D2W
C-20986
Due to the very small size of the 9560NGW (22mm x 30mm x 2.4mm), the marking has been placed in this user manual
because the product label on the device is considered too small to be readable.
USA:
Model
9560NGW FCC
ID:
PD99560NG
Canada:
Model
9560NGW IC:
1000M-
9560NG
Japan:
Model 9560NGW
RF 003-170126
TEL D170080003
Korea:
Model 9560NGW
MSIP-CRM-INT-9560NGW
Taiwan Region:
Model 9560NGW
Model 9560NGW R
Model 9560NGW
Europe:
Model 9560NGW
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac The low band 5.15 - 5.35 GHz is for indoor use only
mode
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 9560NGW
Singapore:
Model 9560NGW
Paraguay:
Model 9560NGW
NR 2017-09-I-0000331
Indonesia:
Model 9560NGW
70899/SDPPI/2020
7965
Due to the very small size of the 9560D2W (12mm x 16mm x 1.8mm), the marking has been placed in this user manual because
the product label on the device is considered too small to be readable.
USA:
Model 9560D2W
Canada:
Model 9560D2W
IC: 1000M-9560D2
Japan:
Model 9560D2W
RF 003-170244
TEL D170150003
Korea:
Model 9560D2W
R-CRM-INT-9560D2W
Taiwan Region:
Model 9560D2W
China Mainland:
Model 9560D2W
Europe:
Model 9560D2W
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2
mode receiver
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 9560D2W
Singapore:
Model 9560D2W
Model 9560D2W
C-20985
Paraguay:
Model 9560D2W
NR 2019-07-I-0382
Indonesia:
Model 9560D2W
72465/SDPPI/2021
7965
Due to the very small size of the 9560D2WL (12mm x 16mm x 1.8mm), the marking has been placed in this user manual
because the product label on the device is considered too small to be readable.
USA:
Model
9560D2WL FCC
ID:
PD99560D2L
Canada:
Model
9560D2WL IC:
1000M-
9560D2L
Japan:
Model 9560D2WL
RF 003-
180060 TEL
D180033003
Korea:
Model 9560D2WL
R-CRM-INT-9560D2WL
Taiwan Region:
Model 9560D2WL
China Mainland:
Model 9560D2WL
Europe:
Model 9560D2WL
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2
mode receiver
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 9560D2WL
Singapore:
Model 9560D2WL
Due to the very small size of the 18265NGW module, the regulatory marking has been placed in this user manual because the
product label on the device is considered too small to be readable
USA: Model 18265NGW, FCC ID: PD918265NG (This module is for factory installation only)
Canada:
Model 18265NGW
IC : 1000M-18265NG
Japan:
Model 18265NGW
Korea:
Model 18265NGW
MSIP-CRM-INT-18265NGW
Taiwan Region:
Model 18265NGW
China Mainland:
Model 18265NGW
Europe:
Model 18265NGW
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions (WiFi/BT)
Intel® Wireless Dock Manager 3.x and previous versions (WiGig)
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac For the standard EN 300 440, the device operating in 5.8 GHz is considered a category 2
mode receiver
(57 - 64 GHz) 25 dBm EIRP max
IEEE802.11 ad mode
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 18265NGW
Brazil:
Model 18265NGW/18265NGW LC
03022-17-04423
Singapore:
Model 18265NGW
Due to the very small size of the 11000D2W/11000D2W LC, the marking has been placed in this user manual because the product
label on the device is considered too small to be readable.
USA:
Model 11000D2W/11000D2W LC
Canada:
Model 11000D2W
IC: 1000M-11000D2
Japan:
Model 11000D2W
Korea:
Model 11000D2W
MSIP-CRM-INT-11000D2W
Taiwan Region:
Model 11000D2W
Model 11000D2W LC
China Mainland:
Model 11000D2W
Model 11000D2W LC
Europe:
Model 11000D2W
Software Version Intel® Wireless Dock Manager 3.x and previous versions
Maximum Power Output
(57 - 64 GHz) 25 dBm EIRP max
IEEE802.11 ad mode
Australia:
Model 11000D2W
Singapore:
Model 11000D2W/11000D2W LC
Due to the very small size of the 13110NGW, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model 13110NGW
Canada:
Model 13110NGW
IC: 1000M-13110NG
Korea:
Model 13110NGW
R-CRM-INT-13110NGW
Taiwan Region:
Model 13110NGW
Europe:
Model 13110NGW
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Singapore:
Model 13110NGW
Due to the very small size of the 11100D2W, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model 11100D2W
Canada:
Model 11100D2W
IC: 1000M-11100D2
Korea:
Model 11100D2W
R-CRM-INT-11100D2W
Taiwan Region:
Model 11100D2W
Europe:
Model 11100D2W
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model 11100D2W
Singapore:
Model 11100D2W
Due to the very small size of the AX101NGW, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
Paraguay:
Model AX101NGW
NR 2021-04-I-0183
Indonesia:
Model AX101NGW
73505/SDPPI/2021
7965
Due to the very small size of the AX101D2W, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
Paraguay:
Model 101D2W
NR 2021-04-I-0184
Indonesia:
Model AX101D2W
73531/SDPPI/2021
7965
Due to the very small size of the AX200D2WL, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX200D2WL
Canada:
Model AX200D2WL
IC: 1000M-AX200D2L
Japan:
Model AX200D2WL
RF: 003-190023
TEL: D190022003
Korea:
Model AX200D2WL
R-C-INT-AX200D2WL
Taiwan Region:
Model AX200D2WL
China Mainland:
Model AX200D2WL
Europe:
Model AX200D2WL
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac/ax The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac/ax For the standard EN 300 440, the device operating in 5.8 GHz is considered a category
mode 2 receiver
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model AX200D2WL
Brazil:
Model AX200D2WL
04137-19-04423
Singapore:
Model AX200D2WL
Argentina:
Model AX200D2WL
Pakistan:
Paraguay:
Due to the very small size of the AX200NGW, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX200NGW
Canada:
Model AX200NGW
IC: 1000M-AX200NG
Japan:
Model AX200NGW
RF: 003-190022
TEL: D190021003
Korea:
Model AX200NGW
R-C-INT-AX200NGW
Taiwan Region:
Model AX200NGW
China Mainland:
Model AX200NGW
Europe:
Model AX200NGW
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac/ax The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac/ax For the standard EN 300 440, the device operating in 5.8 GHz is considered a category
mode 2 receiver
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model AX200NGW
Brazil:
Model AX200NGW
04136-19-04423
Singapore:
Model AX200NGW
Argentina:
Model AX200NGW
Pakistan:
Model AX200NGW
Due to the very small size of the AX201NGW, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX201NGW
Canada:
Model AX201NGW
IC: 1000M-AX201NG
Japan:
Model AX201NGW
RF: 003-180232
TEL: D180131003
Korea:
Model AX201NGW
R-C-INT-AX201NGW
Taiwan Region:
Model AX201NGW
China Mainland:
Model AX201NGW
Europe:
Model AX201NGW
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac/ax The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac/ax For the standard EN 300 440, the device operating in 5.8 GHz is considered a category
mode 2 receiver
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model AX201NGW
Brazil:
Model AX201NGW
ANATEL: 06970-18-04423
Singapore:
Model AX201NGW
Argentina:
Model AX201NGW
Pakistan:
Model AX201NGW
Paraguay:
Model AX201NGW
NR 2019-03-I-000167
Due to the very small size of the AX201D2W, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX201D2W
Canada:
Model AX201D2W
IC: 1000M-AX201D2
Japan:
Model AX201D2W
RF: 003-180233
TEL: D180132003
Korea:
Model AX201D2W
R-C-INT-AX201D2W
Taiwan Region:
Model AX201D2W
China Mainland:
Model AX201D2W
Europe:
Model AX201D2W
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac/ax The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac/ax For the standard EN 300 440, the device operating in 5.8 GHz is considered a category
mode 2 receiver
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model AX201D2W
Brazil:
Model AX201D2W
ANATEL: 07039-18-04423
Singapore:
Model AX201D2W
Argentina:
Model AX201D2W
Pakistan:
Model AX201D2W
Paraguay:
Model AX201D2W
NR 2019-07-I-0380
Due to the very small size of the AX201D2WL, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX201D2WL
Canada:
Model AX201D2WL
IC: 1000M-AX201D2L
Japan:
Model AX201D2WL
RF: 003-180234
TEL: D180133003
Korea:
Model AX201D2WL
R-C-INT-AX201D2WL
Taiwan Region:
Model AX201D2WL
China Mainland:
Model AX201D2WL
Europe:
Model AX201D2WL
Software Version Intel® PROSet/Wireless WiFi Software 20.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac/ax The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac/ax For the standard EN 300 440, the device operating in 5.8 GHz is considered a category
mode 2 receiver
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model AX201D2WL
Brazil:
Model AX201D2WL
ANATEL: 07271-18-04423
Singapore:
Model AX201D2WL
Argentina:
Model AX201D2WL
Pakistan:
Model AX201D2WL
Due to the very small size of the AX203NGW, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX203NGW
Canada:
Model AX203NGW
IC: 1000M-AX203NG
Japan:
Model AX203NGW
RF: 003-200294
TEL: D200230003
Korea:
Model AX203NGW
R-C-INT-AX203NGW
1. 상 호 명: INTEL CORPORATION
2. 기자재의 명칭 (모델명): 특정소출력 무선기기(무선랜을 포함한 무선접속시스템용 무선기기) AX203NGW
3. 제조시기: 2020/11
Taiwan Region:
Model AX203NGW
China Mainland:
Model AX203NGW
Europe:
Model AX203NGW
Software Version Intel® PROSet/Wireless WiFi Software 22.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac/ax The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac/ax For the standard EN 300 440, the device operating in 5.8 GHz is considered a category
mode 2 receiver
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model AX203NGW
Brazil:
Model AX203NGW
TBD
Singapore:
Model AX203NGW
Argentina:
Model AX203NGW
C-25825
Pakistan:
Model AX203NGW
Paraguay:
Model AX203NGW
NR 2021-02-I-0091
Indonesia:
Model AX203NGW
72772/SDPPI/2021
7965
Due to the very small size of the AX203D2W, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX203D2W
Canada:
Model AX203D2W
IC: 1000M-AX203D2
Japan:
Model AX203D2W
RF: 003-200295
TEL: D200231003
Korea:
Model AX203D2W
R-C-INT-AX203D2W
1. 상 호 명: INTEL CORPORATION
2. 기자재의 명칭 (모델명): 특정소출력 무선기기(무선랜을 포함한 무선접속시스템용 무선기기) AX203D2W
3. 제조시기: 2020/11
4. 제 조 자/제 조 국 : INTEL CORPORATION / China Mainland, Taiwan Region
Taiwan Region:
Model AX203D2W
China Mainland:
Model AX203D2W
Europe:
Model AX203D2W
Software Version Intel® PROSet/Wireless WiFi Software 22.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model AX203D2W
Brazil:
Model AX203D2W
TBD
Singapore:
Model AX203D2W
Argentina:
Model AX203D2W
C-25827
Pakistan:
Model AX203D2W
Paraguay:
Model AX203D2W
NR 2021-02-I-0090
Indonesia:
Model AX203D2W
72771/SDPPI/2021
7965
Due to the very small size of the AX210NGW, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX210NGW
Canada:
Model AX210NGW
IC: 1000M-AX210NG
Japan:
Model AX210NGW
RF: 003-200209
TEL: D200188003
5.2 GHz 帯高出力データ通信システム基地局又は陸上移動中継局と通信する場合を除く
Korea:
Model AX210NGW
R-C-INT-AX210NGW
1. 상 호 명: INTEL CORPORATION
2. 기자재의 명칭 (모델명): 특정소출력 무선기기(무선랜을 포함한 무선접속시스템용 무선기기) AX210NGW
3. 제조시기: 2020/09
4. 제 조 자/제 조 국 : INTEL CORPORATION / China Mainland, Taiwan Region
Taiwan Region:
Model AX210NGW
China Mainland:
Model AX210NGW
Europe:
Model AX210NGW
Software Version Intel® PROSet/Wireless WiFi Software 22.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model AX210NGW
Brazil:
Model AX210NGW
14242-20-04423
Singapore:
Model AX210NGW
Argentina:
Model AX210NGW
C-25568
Pakistan:
Model AX210NGW
Paraguay:
Model AX210NGW
NR 2020-11-I-0818
Indonesia:
Model AX210NGW
71459/SDPPI/2020
7965
USA:
Model AX210D2W
Canada:
Model AX210D2W
IC: 1000M-AX210D2
Japan:
Model AX210D2W
RF: 003-200255
TEL: D200217003
5.2 GHz 帯高出力データ通信システム基地局又は陸上移動中継局と通信する場合を除く
Korea:
Model AX210D2W
R-C-INT-AX210D2W
1. 상 호 명: INTEL CORPORATION
2. 기자재의 명칭 (모델명): 특정소출력 무선기기(무선랜을 포함한 무선접속시스템용 무선기기) AX210D2W
3. 제조시기: 2020/11
4. 제 조 자/제 조 국 : INTEL CORPORATION / China Mainland, Taiwan Region
Taiwan Region:
Model AX210D2W
China Mainland:
Model AX210D2W
Europe:
Model AX210D2W
Software Version Intel® PROSet/Wireless WiFi Software 22.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model AX210D2W
Brazil:
Model AX210D2W
TBD
Singapore:
Model AX210D2W
Argentina:
Model AX210D2W
C-25695
Pakistan:
Model AX210D2W
Paraguay:
Model AX210D2W
NR 2020-12-I-0940
Indonesia:
Model AX210D2W
71966/SDPPI/2020
7965
Due to the very small size of the AX211NGW, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX211NGW
Canada:
Model AX211NGW
IC: 1000M-AX211NG
Japan:
Model AX211NGW
RF: 003-210035
TEL: D210019003
Korea:
Model AX211NGW
R-C-INT-AX211NGW
1. 상 호 명: INTEL CORPORATION
2. 기자재의 명칭 (모델명): 특정소출력 무선기기(무선랜을 포함한 무선접속시스템용 무선기기) AX211NGW
3. 제조시기: 2020/11
4. 제 조 자/제 조 국 : INTEL CORPORATION / China Mainland, Taiwan Region
Taiwan Region:
Model AX211NGW
China Mainland:
Model AX211NGW
Europe:
Model AX211NGW
Software Version Intel® PROSet/Wireless WiFi Software 22.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac/ax The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac/ax For the standard EN 300 440, the device operating in 5.8 GHz is considered a category
mode 1 receiver
(5925 - 6425 MHz) 23 dBm EIRP max (200mW)
IEEE802.11ax The band 5.925 - 6.425GHz is for LPI (Low Power in-door)
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model AX211NGW
Singapore:
Model AX211NGW
Brazil:
Model AX211NGW
12069-21-04423
Argentina:
Model AX211NGW
C-26079
Pakistan:
Model AX211NGW
Paraguay:
Model AX211NGW
NR 2021-03-I-0117
Indonesia:
Model AX211NGW
73851/SDPPI/2021
7965
Due to the very small size of the AX211D2W, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX211D2W
Canada:
Model AX211D2W
IC: 1000M-AX211D2
Japan:
Model AX211D2W
RF: 003-210037
TEL: D210021003
Korea:
Model AX211D2W
R-C-INT-AX211D2W
1. 상 호 명: INTEL CORPORATION
2. 기자재의 명칭 (모델명): 특정소출력 무선기기(무선랜을 포함한 무선접속시스템용 무선기기) AX211D2W
3. 제조시기: 2020/11
4. 제 조 자/제 조 국 : INTEL CORPORATION / China Mainland, Taiwan Region
Taiwan Region:
Model AX211D2W
China Mainland:
Model AX211D2W
Europe:
Model AX211D2W
Software Version Intel® PROSet/Wireless WiFi Software 22.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac/ax The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac/ax For the standard EN 300 440, the device operating in 5.8 GHz is considered a category
mode 1 receiver
(5925 - 6425 MHz) 23 dBm EIRP max (200mW)
IEEE802.11ax The band 5.925 - 6.425GHz is for LPI (Low Power in-door)
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model AX211D2W
Singapore:
Model AX211D2W
Brazil:
Model AX211D2W
12073-21-04423
Argentina:
Model AX211D2W
C-26080
Pakistan:
Model AX211D2W
Paraguay:
Model AX211D2W
NR 2021-03-I-0137
Indonesia:
Model AX211D2W
73853/SDPPI/2021
7965
Due to the very small size of the AX211D2WL, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX211D2WL
Canada:
Model AX211D2WL
IC: 1000M-AX211D2L
Japan:
Model AX211D2WL
RF: 003-210039
TEL: D210022003
Korea:
Model AX211D2L
R-C-INT-AX211D2WL
Taiwan Region:
Model AX211D2WL
China Mainland:
Model AX211D2WL
Europe:
Model AX211D2WL
Software Version Intel® PROSet/Wireless WiFi Software 22.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac/ax The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac/ax For the standard EN 300 440, the device operating in 5.8 GHz is considered a category
mode 1 receiver
(5925 - 6425 MHz) 23 dBm EIRP max (200mW)
IEEE802.11ax The band 5.925 - 6.425GHz is for LPI (Low Power in-door)
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia:
Model AX211D2WL
Singapore:
Model AX211D2WL
Brazil:
Model AX211D2WL
14386-21-04423
Pakistan:
Model AX211D2WL
Paraguay:
Model AX211D2WL
NR 2021-04-I-0192
Indonesia:
Model AX211D2WL
73852/SDPPI/2021
7965
Due to the very small size of the AX411NGW, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX411NGW
Canada:
Model AX411NGW
IC: 1000M-AX411NG
Japan:
Model AX411NGW
RF: 003-210221
TEL: D210157003
Korea:
Model AX411NGW
R-C-INT-AX411NGW
Taiwan Region:
Model AX411NGW
China Mainland:
Model AX411NGW
Europe:
Model AX411NGW
Software Version Intel® PROSet/Wireless WiFi Software 22.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
(5150 - 5725 MHz) 23dBm EIRP max (200mW)
IEEE802.11 a/n/ac/ax The low band 5.15 - 5.35 GHz is for indoor use only
mode
(5725 - 5875 MHz) 13.98 dBm EIRP Max (25mW)
IEEE802.11 a/n/ac/ax For the standard EN 300 440, the device operating in 5.8 GHz is considered a category
mode 1 receiver
(5925 - 6425 MHz) 23 dBm EIRP max (200mW)
IEEE802.11ax The band 5.925 - 6.425GHz is for LPI (Low Power in-door)
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Brazil:
Model AX411NGW
12070-21-04423
Argentina:
Model AX411NGW
C-26952
Pakistan:
Model AX411NGW
Paraguay:
Model AX411NGW
NR 2021-10-I-0612
Indonesia:
Model AX411NGW
77535/SDPPI/2021
7965
Due to the very small size of the AX411E2W, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
USA:
Model AX411E2W
Canada:
Model AX411E2W
IC: 1000M-AX411E2
Japan:
Model AX411E2W
RF: 003-210222
TEL: D210158003
Korea:
Model AX411E2W
R-C-INT-AX411E2W
Taiwan Region:
Model AX411E2W
China Mainland:
Model AX411E2W
Europe:
Model AX411E2W
Software Version Intel® PROSet/Wireless WiFi Software 22.x and subsequent versions
Maximum Power Output
(2400 - 2483.5 MHz) 20dBm EIRP max (100mW)
IEEE802.11 b/g/n/ax
mode
Bluetooth
(2400 - 2483.5 MHz) 10dBm EIRP max (10mW)
BLE
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Brazil:
Model AX411E2W
13291-21-04423
Argentina:
Model AX411E2W
C-26953
Pakistan:
Model AX411E2W
Paraguay:
Model AX411E2W
NR 2021-10-I-0643
Indonesia:
Model AX411E2W
77788/SDPPI/2021
7965
Due to the very small size of the BE200NGW, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
IC: 1000M-BE200NG
Taiwan:
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
APPROVED by PTA
TAC NO: 9.697/2023
Due to the very small size of the BE200D2W, the marking has been placed in this user manual because the product label on the
device is considered too small to be readable.
IC: 1000M-BE200D2
Taiwan:
China:
This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
APPROVED by PTA
TAC NO: 9.697/2023
The guidelines described within this document are provided to OEM integrators installing Intel® wireless adapters in notebook and
tablet PC host platforms. Adherence to these requirements is necessary to meet the conditions of compliance with FCC rules,
including RF exposure. When all antenna type and placement guidelines described herein are fulfilled the Intel® wireless adapters
may be incorporated into notebook and tablet PC host platforms with no further restrictions. If any of the guidelines described
herein are not satisfied it may be necessary for the OEM or integrator to perform additional testing and/or obtain additional
approval. The OEM or integrator is responsible to determine the required host regulatory testing and/or obtaining the required host
approvals for compliance. If needed, please contact the applicant/grantee (Intel) regarding detailed information on how to setup the
device for any compliance testing that the OEM integrator is responsible per KDB 996369 D04.
Intel® wireless adapters are intended for OEMs and host integrators only.
The Intel® wireless adapter FCC Grant of Authorization describes any limited conditions of modular approval.
The Intel® wireless adapters must be operated with an access point that has been approved for the country of operation.
Changes or modification to Intel® wireless adapters by OEMs, integrators or other third parties is not permitted. Any changes
or modification to Intel® wireless adapters by OEMs, integrators or other third parties will void authorization to operate the
adapter.
Brazil: Information to be supplied to the End User by the OEMs and Integrators: "Incorporates product approved by Anatel
Only antennas of the same type and with equal or less gains as 3dBi for the 2.4GHz band and 5dBi for the 5GHz and 6-7GHz
bands shall be used with the Intel® wireless adapters. Other types of antennas and/or higher gain antennas may require
additional authorization for operation. For testing purposes the following dual band antenna that approximates closely the above
limits was used:
Modules:
BE200NGW, BE200D2W
Above 6GHz. 3D Peak Antenna Gain tested within the host should be equal or greater than -2 dBi. If the host antenna design in
same type with measured peak antenna gain lower than -2 dBi, then CBP(FCC)/EDT(EU) testing must be performed while the
module is installed in the host.
Based upon FCC Knowledge Database publication number 616217, when there are multiple transmitting devices installed in a
host device, an RF exposure transmitting assessment shall be performed to determine the necessary application and test
requirements. OEM integrators must identify all possible combinations of simultaneous transmission configurations for all
transmitters and antennas installed in the host system. This includes transmitters installed in the host as mobile devices (>20
cm separation from user) and portable devices (<20 cm separation from user). OEM integrators should consult the actual FCC
KDB 616217 document for all details in making this assessment to determine if any additional requirements for testing or FCC
approval is necessary.
To ensure RF exposure compliance the antenna(s) used with the Intel® wireless adapters must be installed in notebook or
tablet PC host platforms to provide a minimum separation distance from all persons, in all operating modes and orientations of
the host platform, with strict adherence to the table below. The antenna separation distance applies to both horizontal and
vertical orientation of the antenna when installed in the host system.
Any separation distances less than those shown will require additional evaluation and FCC authorization.
For WiFi/Bluetooth combination adapters it is recommended that a 5 cm separation distance between transmitting antennas be
provided within the host system to maintain an adequate separation ratio for simultaneous WiFi and Bluetooth transmission. For
less than 5 cm separation the separation ratio must be verified according to FCC publication KDB 447498 for the specific adapter.
* This wireless adapter may be installed in mobile devices only (requires > 20 cm antenna separation from the body of user).
The Monopole and Dipole antennas are certified under mobile configurations and require > 20 cm separation from the body of
user.
Additional regulatory authorization process may be required if wishing to place the 60 GHz/802.11ad RFEM (antenna array) closer
than 20 cm to the user.
The following regulatory and safety notices must be published in documentation supplied to the end user of the product or system
incorporating the Intel® wireless adapter, in compliance with local regulations. Host system must be labeled with "Contains FCC ID:
XXXXXXXX", FCC ID displayed on label.
The wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as described in the user
documentation that comes with the product. For country-specific approvals, see Radio Approvals. Intel Corporation is not
responsible for any radio or television interference caused by unauthorized modification of the devices included with the wireless
adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation. The
correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user.
Intel Corporation and authorized resellers or distributors are not liable for any damage or violation of government regulations that
may arise from the user failing to comply with these guidelines.
China Mainland:
模块通过型号核准并不代表嵌入或使用该模块的最终设备符合相关无线电管理技术规定或标准,最终设备厂商须对产品的技术特性是否符合无线电管理技术
规定或标准负责
Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad Radio Usage
The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b,
802.11g, 802.11n, and 802.11ad products.
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad wireless LAN devices
may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n products are designed for use only in specific
countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are
responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are
configured with the correct selection of frequency and channel for the country of use. Any deviation from permissible settings and
restrictions in the country of use could be an infringement of national law and may be punished as such.
Back to Top
Back to Contents
Trademarks and Disclaimers
Back to Contents
Specifications
This section provides specification information for the family of Intel® wireless adapters. The following list may not
be all inclusive.
Dimensions Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x
4.5 mm)
General
Operating Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (32-bit
Systems and 64-bit)
Wi-Fi Alliance* Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-
certification Personal, WPA2-Enterprise, WMM, WPS
Cisco Compatible Cisco Compatible Extensions, v4.0
Extensions
certification
IEEE Feature Sets IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11d, 802.11h
Architecture Infrastructure or ad hoc (peer-to-peer) operating modes
Security WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP
128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS,
EAP-AKA
Product Safety UL, C-UL, CB (IEC/EN 62368-1)
Connector
General
Operating Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (32-bit
Systems and 64-bit)
Wi-Fi Alliance* Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-
certification Personal, WPA2-Enterprise, WMM, WPS
Cisco Compatible Cisco Compatible Extensions, v4.0
Extensions
certification
IEEE Feature Sets IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11d, 802.11h
Architecture Infrastructure or ad hoc (peer-to-peer) operating modes
Security WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP
128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS,
EAP-AKA
Product Safety UL, C-UL, CB (IEC/EN 62368-1)
Wi-Fi Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-
Alliance* Enterprise, WPA2-Personal, WPA2-Enterprise, WPS, WMM, WMM Power Save, EAP-SIM, LEAP,
certification PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA, P2P
Cisco Cisco Compatible Extensions, v4.0
Compatible
Extensions
certification
Operating Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (32-bit and
Systems 64-bit)
Wi-Fi Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-
Alliance* Enterprise, WPA2-Personal, WPA2-Enterprise, WPS, WMM, WMM Power Save, EAP-SIM, LEAP,
certification PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA, P2P
Cisco Cisco Compatible Extensions, v4.0
Compatible
Extensions
certification
WLAN IEEE 802.11g, 802.11b, 802.11a, 802.11n
Standard
Architecture Infrastructure or ad hoc (peer-to-peer) operating modes
Security WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP
128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-
AKA
Product UL, C-UL, CB (IEC/EN 62368-1)
Safety
Tx/Rx: 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65,
60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps
IEEE 802.11a 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11g 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11b 11, 5.5, 2, 1 Mbps
Data Rates
General
Operating Microsoft Windows* XP (32-bit and 64-bit)
Systems Windows Vista* (32-bit and 64-bit)
Windows* 7 (32-bit and 64-bit)
Windows* 8 (32-bit and 64-bit)
Windows* 8.1 (32-bit and 64-bit)
Wi-Fi Alliance* Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-
certification Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP,
TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA
Cisco Cisco Compatible Extensions, v4.0
Compatible
Extensions
certification
IEEE Feature Intel® Centrino® Wireless-N + WiMAX 6150:
Sets IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11h, 802.11d
WiMAX
Frequency Intel® Centrino® Wireless-N + WiMAX 6150: 2.3-2.4 GHz / 2.496-2.690 GHz
band
Intel® Centrino® Advanced-N + WiMAX 6250: 2.3-2.4 GHz / 2.496-2.690 GHz / 3.4-3.8 GHz
Modulation UL - QPSK, 16 QAM
Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5
mm)
Antenna Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066
Interface
Connector
Antenna On-board diversity
Diversity
Connector 52-pin Mini Card edge connector
Interface
Voltage 3.3 V
Operating 0 to +80 degrees Celsius
Temperature
(Adapter
Shield)
Tx/Rx: 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65,
60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps
IEEE 802.11a 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11g 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11b 11, 5.5, 2, 1 Mbps
Data Rates
General
Operating Microsoft Windows* XP (32-bit and 64-bit)
Systems Windows Vista* (32-bit and 64-bit)
Windows* 7 (32-bit and 64-bit)
Windows* 8 (32-bit and 64-bit)
Windows* 8.1 (32-bit and 64-bit)
Wi-Fi Alliance* Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-
certification Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP,
TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA
Cisco Cisco Compatible Extensions, v4.0
Compatible
Extensions
certification
WLAN IEEE 802.11g, 802.11b, 802.11a, 802.11n
Standard
Architecture Infrastructure or ad hoc (peer-to-peer) operating modes
Security WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP
128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-
AKA
Product Safety UL, C-UL, CB (IEC/EN 62368-1)
Form Factors Half-Mini Card and M.2 (Next Generation Form Factor - NGFF)
Electrical interfaces PCIe and USB 2.0 for both form factors
Antenna Interface Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066
Model 7260NGW - 802.11agn, ac, 2x2, Bluetooth 4.0, PCIe, USB, M.2
Model 7260HMW
Model 7260NGW
General
Operating Systems Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (64-
bit)
Wi-Fi Alliance* Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,
certification Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.
Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes
Cisco Compatible Cisco Compatible Extensions, v4.0
Extensions
certification
Security
Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA
Authentication PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2
Protocols
Form Factors Half-Mini Card, M.2 (Next Generation Form Factor - NGFF)
Electrical interfaces PCIe, USB 2.0 for both form factors
Antenna Interface Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066
Connector
Antenna Diversity On-board diversity
IEEE 802.11 Networking Intel® Dual Band Wireless-N 7260
Standards
Model 7260HMW AN - 802.11agn, 2x2, Bluetooth 4.0, PCIe, USB, HMC
Model 7260NGW AN - 802.11agn, 2x2, Bluetooth 4.0, PCIe, USB, M.2
Model 7260HMW NB - 802.11agn, 2x2, PCIe, USB, HMC
Model 7260NGW NB - 802.11agn, 2x2, PCIe, USB, M.2
Intel® Wireless-N7260
IEEE 802.11a Data 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Rates
IEEE 802.11g Data 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Rates
IEEE 802.11b Data 11, 5.5, 2, 1 Mbps
Rates
Bluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by the
following adapters
Model 7260HMW AN
Model 7260NGW AN
Model 7260HMW BN
Model 7260NGWBN
General
Operating Systems Windows* 7 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows* 8.1 (64-
bit)
Wi-Fi Alliance* Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS
certification 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device
connections.
Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes
Cisco Compatible Cisco Compatible Extensions, v4.0
Extensions certification
Security
Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-
AKA
Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2
Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP
Wi-Fi Direct* Encryption WPA2, AES-CCMP
and Authentication
Product Safety UL, C-UL, CB (IEC/EN 62368-1)
Model 3160HMW
Model 3160NGW
General
Operating Systems Windows* 7 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows* 8.1 (64-bit)
Wi-Fi Alliance* Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,
certification Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.
Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes
Cisco Compatible Cisco Compatible Extensions, v4.0
Extensions
certification
Security
Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA
Authentication PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2
Protocols
Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP
Wi-Fi Direct* WPA2, AES-CCMP
Encryption and
Authentication
Product Safety UL, C-UL, CB (IEC/EN 62368-1)
Standards
Model 7265NGW
General
Operating Systems Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (64-
bit)
Wi-Fi Alliance* Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,
certification Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.
Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes
Cisco Compatible Cisco Compatible Extensions, v4.0
Extensions
certification
Security
Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA
Authentication PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2
Protocols
Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP
Wi-Fi Direct* WPA2, AES-CCMP
Encryption and
Authentication
Intel® Wireless-N7265
Model 7265NGW AN
Model 7265NGW NB
Model 7265NGWBN
General
Operating Systems Windows* 7 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows* 8.1 (64-
bit)
Wi-Fi Alliance* Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS
certification 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device
connections.
Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes
Cisco Compatible Cisco Compatible Extensions, v4.0
Extensions certification
Security
Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-
AKA
Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2
Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP
Wi-Fi Direct* Encryption WPA2, AES-CCMP
and Authentication
Product Safety UL, C-UL, CB (IEC/EN 62368-1)
Rates
IEEE 802.11g Data 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Rates
IEEE 802.11b Data 11, 5.5, 2, 1 Mbps
Rates
Bluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by the
following adapters
Model 8260NGW
General
Operating Systems Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (64-
bit)
Wi-Fi Alliance* Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,
certification Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.
Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes
Cisco Compatible Cisco Compatible Extensions, v4.0
Extensions
certification
Security
Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA
Authentication PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2
Protocols
Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIP
Wi-Fi Direct* WPA2, AES-CCMP
Encryption and
Authentication
Product Safety UL, C-UL, CB (IEC/EN 62368-1)
General
Dimensions (H x W M.2 2230: 22 mm x 30 mm x 2.4 mm
x D)
M.2 1216: 12 mm x 16 mm x 1.8 mm
Wi-Fi Alliance* Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM-PS*, WPA*, WPA2*, WPS2*, Protected
certification Management Frames, Wi-Fi Direct* for peer to peer device connections, Wi-Fi Miracast*
as Source.
IEEE WLAN IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r,
Standard 802.11k, 802.11v pending OS support; Fine Timing Measurement based on
802.11REVmc
Roaming Supports seamless roaming between access points
Bluetooth Dual Mode Bluetooth* 4.2, BLE
Security
Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA,
EAP-AKA
Authentication PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2
Protocols
Encryption 64-bit and 128-bit WEP, 128-bit AES-CCMP
Wi-Fi Direct* WPA2-PSK, AES-CCMP
Encryption and
Authentication
Compliance
Product Safety UL, C-UL, CB (IEC 62368-1)
Model Numbers
Models Model 8265NGWH 802.11ac, 2x2, Bluetooth* 4.2, PCIe, USB, LTE
Coexistence, eFEM, M.2 2230 HE
Model 8265NGW 802.11ac, 2x2, Bluetooth* 4.2, PCIe, USB, M.2
2230 MS
Model 8265D2W 802.11ac, 2x2, Bluetooth* 4.2, PCIe, LTE
Coexistence, M.2 1216 SD
Frequency 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)
Modulation
Frequency band 5.15GHz - 5.85GHz (dependent on 2.400 - 2.4835GHz (dependent on country)
country)
Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 CCK, DQPSK, DBPSK
QAM
Wireless Medium 5GHz UNII: Orthogonal Frequency 2.4GHz ISM: Orthogonal Frequency Division
Division Multiplexing (OFDM) Multiplexing (OFDM)
Channels All channels as defined by the relevant specification and country rules.
Spatial streams Intel® Dual Band Wireless-AC 8265: 2 X 2
Data Rates All data rates are theoretical maximums.
IEEE 802.11ac Data Intel® Dual Band Wireless-AC 8265: Up to 867 Mbps
Rates
IEEE 802.11n Data Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,
Rates 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2
IEEE 802.11a Data 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Rates
IEEE 802.11g Data 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Rates
IEEE 802.11b Data 11, 5.5, 2, 1 Mbps
Rates
General
Dimensions (H x W x M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max
D) (bottom side)]
Channels All channels as defined by the relevant specification and country rules.
General
Dimensions (H x W x M.2 2230: 22 mm x 30 mm x 2.4 mm
D)
M.2 1216: 12 mm x 16 mm x 1.57 (+-0.08) mm
Regulatory For a list of country approvals, please contact your local Intel representatives.
General
Dimensions (H x W x M.2 2230: 22 mm x 30 mm x 2.4 mm
D)
M.2 1216: 12 mm x 16 mm x 1.57 (+-0.08) mm
Wi-Fi Alliance* Wi-Fi CERTIFIED* a/b/g/n/ac with wave 2 features, WMM*, WMM-PS*, WPA*, WPA2*,
certification WPS2*, Protected Management Frames, Wi-Fi Miracast* as Source, and Wi-Fi Direct
IEEE WLANStandard IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r,
802.11k, 802.11v pending OS support; Fine Timing Measurement based on
802.11REVmc
Roaming Supports seamless roaming between access points
Bluetooth Bluetooth* 5
Security
Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, EAP-SIM, EAP-AKA)
Authentication PAP, CHAP, TLS, MS-CHAP*, MS-CHAPv2
Protocols
Encryption 64-bit and 128-bit WEP, 128-bit AES-CCMP
Wi-Fi Direct* WPA2-PSK, AES-CCMP
Encryption and
Authentication
Compliance
Regulatory For a list of country approvals, please contact your local Intel representatives.
US Government FIPS, FISMA
Product Safety UL, C-UL, CB (IEC 62368-1)
Model Numbers
Models 9462NGW 802.11ac wave 2, 1x1, Bluetooth* 5, PCIe,
USB, M.2 2230, Diversity Antenna
9462D2W 802.11ac wave 2, 1x1, Bluetooth* 5, PCIe,
USB, M.2 1216, Diversity Antenna
Frequency 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)
Modulation
Frequency band 5.15GHz - 5.85GHz (dependent on 2.400 - 2.4835GHz (dependent on country)
country)
Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 CCK, DQPSK, DBPSK
QAM
Wireless Medium 5GHz UNII: Orthogonal Frequency 2.4GHz ISM: Orthogonal Frequency Division
Division Multiplexing (OFDM) Multiplexing (OFDM)
Channels All channels as defined by the relevant specification and country rules.
Spatial streams Intel® Wireless-AC 9462: 1 X 1
Data Rates All data rates are theoretical maximums.
IEEE 802.11ac Data 433 Mbps when using 80MHz channels
Rates
IEEE 802.11n Data Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,
Rates 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2
IEEE 802.11a Data 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Rates
IEEE 802.11g Data 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Rates
IEEE 802.11b Data 11, 5.5, 2, 1 Mbps
Rates
General
Rates
IEEE 802.11g Data 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Rates
IEEE 802.11b Data 11, 5.5, 2, 1 Mbps
Rates
Bluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE)
General
Operating Systems Microsoft Windows 7*, Microsoft Windows 8.1* with connected standby
Wi-Fi Alliance* Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,
certification Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.
Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes
Cisco Compatible Cisco Compatible Extensions, v4.0
Extensions
certification
Security
Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA
Authentication PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2
Protocols
Encryption 64-bit and 128-bit WEP, AES-CCMP, AES-GCMP, TKIP
Wi-Fi Direct* WPA2, AES-CCMP
Encryption and
Authentication
Product Safety UL, C-UL, CB (IEC/EN 62368-1)
Channels 1, 2 and 3, All channels as defined by the relevant specification and country
subject to country rules.
rules
Temperature
(Adapter Shield)
General
Dimensions (H x W M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5mm Max (Top Side)/ 0.1mm Max (Bottom
x D) Side)]
Weight M.2 2230: 2.4g
Antenna Diversity Supported
Radio ON/OFF Supported
Control
Connector interface M.2: PCIe, USB Interface to Intel® Wireless Gigabit-Antenna M10101 Module using X-FL
(single coax cable to carry power, IF and control)
Operating 0 to +80 degrees Celsius
Temperature
(Adapter Shield)
Humidity Non- 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)
Operating
Operating Systems Microsoft Windows 7*, Microsoft Windows 8.1*, Microsoft Windows 10, Linux* (limited
feature support), Android
Wi-Fi Alliance Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM-PS*, WPA*, WPA2*, WPS2, Protected
Management Frames, Wi-Fi Direct* for peer to peer device connections, Wi-Fi Miracast
as Source
IEEE WLAN IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r,
Standard 802.11k, 802.11v pending OS support; Fine Timing Measurement based on
802.11REVmc
Roaming Supports seamless roaming between respective access points
Bluetooth Dual Mode Bluetooth* 4.2, BLE
Frequency 60GHz 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)
Modulation (802.11ad)
Frequency band 57GHz - 64GHz 5.15GHz - 5.85GHz 2.400 - 2.4835GHz (dependent
(dependent on (dependent on country) on country)
country)
Modulation DPSK, BPSK, BPSK, QPSK, 16 QAM, 64 CCK, DQPSK, DBPSK
QPSK, 16 QAM, QAM, 256 QAM
Wireless Medium DMG control PHY, 5GHz UNII: Orthogonal 2.4GHz ISM: Orthogonal
DMG SC PHY Frequency Division Frequency Division Multiplexing
Multiplexing (OFDM) (OFDM)
Channels 1, 2 and 3, All channels as defined by the relevant specification and country
subject to country rules.
rules
Spatial streams N/A Intel® Tri-Band Wireless-AC 18265
Data Rates All data rates are theoretical maximums.
IEEE 802.11ac Data Up to 867 Mbps
Rates
IEEE 802.11ad Data 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 Mbps
Rates
IEEE 802.11n Data Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,
Rates 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2
IEEE 802.11a Data 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Rates
IEEE 802.11g Data 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Rates
General
Dimensions (H M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom
x W x D) side)]
Antenna Supported
Diversity
Radio ON/OFF Supported
Control
Connector M.2: CNVio2
Interface
Operating 0 to +80 degrees Celsius
Temperature
(Adapter
Shield)
General
Dimensions M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom
(H x W x D) side)]
Antenna Supported
Diversity
Radio ON/OFF Supported
Control
Connector M.2: PCIe, USB
Interface
Operating 0 to +80 degrees Celsius
Temperature
(Adapter
Shield)
Humidity 50% to 90% RH non-condensing (at temperatures of 25 °C to 35 °C)
Operating Microsoft Windows 10*, Linux*, Chrome OS*
Systems
Wi-Fi Wi-Fi CERTIFIED* a/b/g/n/ac with wave 2 features, WMM*, WMM-PS*, WPA*, WPA2*, WPS*,
Alliance* PMF*, Wi-Fi Direct*, Wi-Fi Miracast*, Wi-Fi Agile Multiband*, Wi-Fi Optimized Connectivity*,
certification Wi-Fi Location*, Passpoint*, Wi-Fi Aware*, and Wi-Fi TimeSync*
IEEE WLAN IEEE 802.11-2016 and select amendments (selected feature coverage)
Standard
IEEE 802.11a, b, g, n, ac, ax, d, e, h, i, k, r, u, v, w, ai; Fine Timing Measurement based on
802.11-2016
Bluetooth Bluetooth* 5
Security
Authentication WPA* and WPA2* Personal and Enterprise; WPA3* (pending OS support)
Authentication 802.1X EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2 (EAP-SIM, EAP-AKA, EAP-
Protocols AKA')
Encryption 64-bit and 128-bit WEP, TKIP, 128-bit AES-CCMP, 256-bit AES-GCMP
Compliance
Regulatory For a list of country approvals, please contact your local Intel representatives.
US FIPS 140-2, FISMA
Government
Product UL, C-UL, CB (IEC 62368-1)
Safety
Model Numbers
Models AX200NGW 802.11ax, 2x2, Bluetooth* 5, M.2 2230
AX200D2WL 802.11ax, 2x2, Bluetooth* 5, M.2 1216; LTE
Coexistence
Frequency 5GHz (802.11a/n/ac/ax) 2.4GHz (802.11b/g/n/ax)
Modulation
Frequency 5.15GHz - 5.895GHz 2.400 - 2.4835GHz
band
(dependent on country) (dependent on country)
Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, CCK, DQPSK, DBPSK, 16 QAM, 64 QAM, 256
1024 QAM QAM, 1024 QAM
Wireless 5GHz UNII: Orthogonal Frequency Division 2.4GHz ISM: Orthogonal Frequency Division
Medium Multiple Access (OFDMA) Multiple Access (OFDMA)
Channels All channels as defined by the relevant specification and country rules.
Data Rates All data rates are theoretical maximums.
IEEE Up to 2.4 Gbps
802.11ax
Data Rates
IEEE Up to 867 Mbps
802.11ac
Data Rates
IEEE 802.11n Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117,
Data Rates 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2
IEEE 802.11a 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11g 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11b 11, 5.5, 2, 1 Mbps
Data Rates
Dimensions M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom
(H x W x D) side)]
Channels All channels as defined by the relevant specification and country rules.
Data Rates All data rates are theoretical maximums.
IEEE Up to 2.4 Gbps
802.11ax
Data Rates
IEEE Up to 867 Mbps
802.11ac
Data Rates
IEEE 802.11n Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117,
Data Rates 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2
IEEE 802.11a 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11g 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11b 11, 5.5, 2, 1 Mbps
Data Rates
General
Dimensions (H M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom
x W x D) side)]
Encryption 64-bit and 128-bit WEP, TKIP, 128-bit AES-CCMP, 256-bit AES-GCMP
Compliance
Regulatory For a list of country approvals, please contact your local Intel representatives.
US Government FIPS 140-2
Product Safety UL, C-UL, CB (IEC 62368-1)
Model Numbers
Models AX203NGW Wi-Fi 6 (802.11ax) 2x2 80MHz, Bluetooth* 5.1, M.2 2230
AX203D2W Wi-Fi 6 (802.11ax) 2x2 80MHz, Bluetooth* 5.1, M.2 1216
General
Dimensions (H M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom
x W x D) side)]
Model Numbers
(dependent on country)
Modulation BPSK, QPSK, 16 QAM, 64 BPSK, QPSK, 16 QAM, 64 CCK, DQPSK, DBPSK,16
QAM, 256 QAM, 1024 QAM QAM, 256 QAM, 1024 QAM QAM, 64 QAM, 256 QAM,
1024 QAM
Wireless 6-7GHz: Orthogonal 5GHz UNII: Orthogonal 2.4GHz ISM: Orthogonal
Medium Frequency Division Multiple Frequency Division Multiple Frequency Division Multiple
Access (OFDMA) Access (OFDMA) Access (OFDMA)
Channels All channels as defined by the relevant specification and country rules.
Data Rates All data rates are theoretical maximums.
IEEE 802.11ax Up to 2.4 Gbps
Data Rates
IEEE 802.11ac Up to 867 Mbps
Data Rates
IEEE 802.11n Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117,
Data Rates 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2
IEEE 802.11a 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11g 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11b 11, 5.5, 2, 1 Mbps
Data Rates
General
Dimensions (H M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom
x W x D) side)]
Wi-Fi Alliance* Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM-PS*, WPA3*, PMF*, Wi-Fi Direct*, and Wi-Fi
certification Agile Multiband*
IEEE WLAN IEEE 802.11-2016 and select amendments (selected feature coverage)
Standard
IEEE 802.11a, b, g, n, ac, ax, d, e, h, i, k, r, u, v, w; Fine Timing Measurement based on
802.11-2016
(dependent on country)
Modulation BPSK, QPSK, 16 QAM, 64 BPSK, QPSK, 16 QAM, 64 CCK, DQPSK, DBPSK,16
QAM, 256 QAM, 1024 QAM QAM, 256 QAM, 1024 QAM QAM, 64 QAM, 256 QAM,
1024 QAM
Wireless 6-7GHz: Orthogonal 5GHz UNII: Orthogonal 2.4GHz ISM: Orthogonal
Medium Frequency Division Multiple Frequency Division Multiple Frequency Division Multiple
Access (OFDMA) Access (OFDMA) Access (OFDMA)
Channels All channels as defined by the relevant specification and country rules.
Data Rates All data rates are theoretical maximums.
IEEE 802.11ax Up to 2.4 Gbps
Data Rates
IEEE 802.11ac Up to 867 Mbps
Data Rates
IEEE 802.11n Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117,
Data Rates 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2
IEEE 802.11a 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11g 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11b 11, 5.5, 2, 1 Mbps
Data Rates
(dependent on country)
Modulation BPSK, QPSK, 16 QAM, 64 BPSK, QPSK, 16 QAM, 64 CCK, DQPSK, DBPSK,16
QAM, 256 QAM, 1024 QAM QAM, 256 QAM, 1024 QAM QAM, 64 QAM, 256 QAM,
1024 QAM
General
Dimensions (H M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5 mm max (top side)/ 0.1 mm max (bottom
x W x D) side)]
Security
Authentication WPA3* personal and enterprise WPA2* transition mode
Authentication 802.1X EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2 (EAP-SIM, EAP-AKA, EAP-
Protocols AKA')
Encryption 128-bit AES-CCMP, 256-bit AES-GCMP
Compliance
Regulatory For a list of country approvals, please contact your local Intel representatives.
US FIPS 140-2
Government
Product Safety UL, C-UL, CB (IEC 62368-1)
Model Numbers
Models BE200NGW Wi-Fi 7, 2x2, Bluetooth* 5.4, M.2 2230
BE200D2W Wi-Fi 7, 2x2, Bluetooth* 5.4, M.2 1216
Frequency 6-7GHz (802.11ax R2) 5GHz 2.4GHz
Modulation (802.11be) (802.11a/n/ac/ax) (802.11b/g/n/ax)
Frequency FCC: 5.925GHz-7.125GHz 5.15GHz - 5.895GHz 2.400 - 2.4835GHz
band
EU: 5925GHz- 6.425GHz (dependent on country) (dependent on country)
(dependent on country)
Modulation BPSK, QPSK, 16 QAM, 64 BPSK, QPSK, 16 QAM, 64 CCK, DQPSK, DBPSK,16
QAM, 256 QAM, 1024 QAM, 256 QAM, 1024 QAM QAM, 64 QAM, 256 QAM,
QAM, 4K-QAM (4096-QAM) 1024 QAM
Wireless 6-7GHz: Orthogonal 5GHz UNII: Orthogonal 2.4GHz ISM: Orthogonal
Medium Frequency Division Multiple Frequency Division Multiple Frequency Division Multiple
Access (OFDMA) Access (OFDMA) Access (OFDMA)
Channels All channels as defined by the relevant specification and country rules.
Data Rates All data rates are theoretical maximums.
IEEE 802.11ax Up to 2.4 Gbps
Data Rates
IEEE 802.11ac Up to 867 Mbps
Data Rates
IEEE 802.11n Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117,
Data Rates 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2
IEEE 802.11a 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11g 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data Rates
IEEE 802.11b 11, 5.5, 2, 1 Mbps
Data Rates
Back to Top
Back to Contents
Trademarks and Disclaimers
Back to Contents
Customer Support
Intel support is available online or by telephone. Available services include the most up-to-date product information,
installation instructions about specific products, and troubleshooting tips.
Online Support
Technical Support: http://www.intel.com/support
Back to Top
Back to Contents
Trademarks and Disclaimers
Back to Contents
Warranty Information
Limited Warranty
In this warranty statement, the term "Product" applies to the wireless adapters listed in Specifications.
Intel warrants to the purchaser of the Product that the Product, if properly used and installed, will be free from
defects in material and workmanship and will substantially conform to Intel’s publicly available specifications for the
Product for a period of one (1) year beginning on the date the Product was purchased in its original sealed
packaging.
SOFTWARE OF ANY KIND DELIVERED WITH OR AS PART OF THE PRODUCT IS EXPRESSLY PROVIDED "AS IS",
SPECIFICALLY EXCLUDING ALL OTHER WARRANTIES, EXPRESS, IMPLIED (INCLUDING WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE), provided
however, that Intel warrants that the media on which the software is furnished will be free from defects for a period
of ninety (90) days from the date of delivery. If such a defect appears within the warranty period, you may return
the defective media to Intel for replacement or alternative delivery of the software at Intel's discretion and without
charge. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text,
graphics, links or other items contained within the software.
If the Product which is the subject of this Limited Warranty fails during the warranty period for reasons covered by
this Limited Warranty, Intel, at its option, will:
THIS LIMITED WARRANTY, AND ANY IMPLIED WARRANTIES THAT MAY EXIST UNDER APPLICABLE STATE,
NATIONAL, PROVINCIAL OR LOCAL LAW, APPLY ONLY TO YOU AS THE ORIGINAL PURCHASER OF THE PRODUCT.
Intel does not warrant that the Product, whether purchased stand-alone or integrated with other products, including
without limitation, semi-conductor components, will be free from design defects or errors known as "errata." Current
characterized errata are available upon request. Further, this Limited Warranty does NOT cover: (i) any costs
associated with the replacement or repair of the Product, including labor, installation or other costs incurred by you,
and in particular, any costs relating to the removal or replacement of any Product soldered or otherwise permanently
affixed to any printed circuit board or integrated with other products; (ii) damage to the Product due to external
causes, including accident, problems with electrical power, abnormal, mechanical or environmental conditions, usage
not in accordance with product instructions, misuse, neglect, accident, abuse, alteration, repair, improper or
unauthorized installation or improper testing, or (iii) any Product which has been modified or operated outside of
Intel’s publicly available specifications or where the original product identification markings (trademark or serial
number) have been removed, altered or obliterated from the Product; or (iv) issues resulting from modification
(other than by Intel) of software products provided or included in the Product, (v) incorporation of software products,
other than those software products provided or included in the Product by Intel, or (vi) failure to apply Intel-supplied
modifications or corrections to any software provided with or included in the Product.
To obtain warranty service for the Product, you may contact your original place of purchase in accordance with its
instructions or you may contact Intel. To request warranty service from Intel, you must contact the Intel Customer
Support ("ICS") center in your region (http://www.intel.com/support/wireless/) within the warranty period during
normal business hours (local time), excluding holidays and return the Product to the designated ICS center. Please
be prepared to provide: (1) your name, mailing address, email address, telephone numbers and, in the USA, valid
credit card information; (2) proof of purchase; (3) model name and product identification number found on the
Product; and (4) an explanation of the problem. The Customer Service Representative may need additional
information from you depending on the nature of the problem. Upon ICS's verification that the Product is eligible for
warranty service, you will be issued a Return Material Authorization ("RMA") number and provided with instructions
for returning the Product to the designated ICS center. When you return the Product to the ICS center, you must
include the RMA number on the outside of the package. Intel will not accept any returned Product without an RMA
number, or that has an invalid RMA number, on the package. You must deliver the returned Product to the
designated ICS center in the original or equivalent packaging, with shipping charges pre-paid (within the USA), and
assume the risk of damage or loss during shipment. Intel may elect to repair or replace the Product with either a new
or reconditioned Product or components, as Intel deems appropriate. The repaired or replaced product will be
shipped to you at the expense of Intel within a reasonable period of time after receipt of the returned Product by
ICS. The returned Product shall become Intel’s property on receipt by ICS. The replacement product is warranted
under this written warranty and is subject to the same limitations of liability and exclusions for ninety (90) days or
the remainder of the original warranty period, whichever is longer. If Intel replaces the Product, the Limited
Warranty period for the replacement Product is not extended.
THIS WARRANTY REPLACES ALL OTHER WARRANTIES FOR THE PRODUCT AND INTEL DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, COURSE OF DEALING AND USAGE
OF TRADE. Some states (or jurisdictions) do not allow the exclusion of implied warranties so this
limitation may not apply to you. ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE
LIMITED WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD. Some states (or jurisdictions) do
not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.
LIMITATIONS OF LIABILITY
INTEL’S RESPONSIBILITY UNDER THIS OR ANY OTHER WARRANTY, IMPLIED OR EXPRESS, IS LIMITED TO REPAIR,
REPLACEMENT OR REFUND, AS SET FORTH ABOVE. THESE REMEDIES ARE THE SOLE AND EXCLUSIVE REMEDIES
FOR ANY BREACH OF WARRANTY. TO THE MAXIMUM EXTENT PERMITTED BY LAW, INTEL IS NOT RESPONSIBLE FOR
ANY DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY
OR UNDER ANY OTHER LEGAL THEORY (INCLUDING WITHOUT LIMITATION, LOST PROFITS, DOWNTIME, LOSS OF
GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COSTS OF RECOVERING,
REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH A SYSTEM CONTAINING
THE PRODUCT), EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states (or
jurisdictions) do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY STATE OR JURISDICTION. ANY AND ALL
DISPUTES ARISING UNDER OR RELATED TO THIS LIMITED WARRANTY SHALL BE ADJUDICATED IN THE FOLLOWING
FORUMS AND GOVERNED BY THE FOLLOWING LAWS: FOR THE UNITED STATES OF AMERICA, CANADA, NORTH
AMERICA AND SOUTH AMERICA, THE FORUM SHALL BE SANTA CLARA, CALIFORNIA, USA AND THE APPLICABLE LAW
SHALL BE THAT OF THE STATE OF DELAWARE. FOR THE ASIA PACIFIC REGION (EXCEPT FOR MAINLAND CHINA),
THE FORUM SHALL BE SINGAPORE AND THE APPLICABLE LAW SHALL BE THAT OF SINGAPORE. FOR EUROPE AND
THE REST OF THE WORLD, THE FORUM SHALL BE LONDON AND THE APPLICABLE LAW SHALL BE THAT OF ENGLAND
AND WALES IN THE EVENT OF ANY CONFLICT BETWEEN THE ENGLISH LANGUAGE VERSION AND ANY OTHER
TRANSLATED VERSION(S)OF THIS LIMITED WARRANTY (WITH THE EXCEPTION OF THE SIMPLIFIED CHINESE
VERSION), THE ENGLISH LANGUAGE VERSION SHALL CONTROL.
IMPORTANT! UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS SOLD HEREUNDER ARE
NOT DESIGNED, OR INTENDED FOR USE IN ANY MEDICAL, LIFE SAVING OR LIFE SUSTAINING SYSTEMS,
TRANSPORTATION SYSTEMS, NUCLEAR SYSTEMS, OR FOR ANY OTHER MISSION CRITICAL APPLICATION IN WHICH
THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY
OCCUR.
WEEE
Back to Top
Back to Contents
Trademarks and Disclaimers