Scribd
Upload
17 views

RCC14 Crack Width

Uploaded by

mrswcecivil
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
17 views

RCC14 Crack Width

Uploaded by

mrswcecivil
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

Project

DCH BRIDGES PLOT-04 REINFORCED CONCRETE COUNCIL


Client
Made by Date Page
Location
RA 15-Nov-2018 1
Crack Width Calculations to BS8110: 1997/ BS8007:1987 Checked Revision Job No
Originated from RCC14.xls on CD © 1999 BCA for RCC PK

CRACK WIDTH CALCULATIONS - FLEXURE -

INPUT
fcu= 50 N/mm2
fy= 460 N/mm2
Area of reinforcement " As " = 1340 mm2
b= 1000 mm
h= 300 mm
d= 252 mm
Minimum cover to tension reinforcement " CO " = 40 mm
Maxmum bar spacing " S " = 150 mm
Bar dia " DIA " = 16 mm
" acr " =(((S/2)^2+(CO+DIA/2)^2)^(1/2)-DIA/2) as default or enter other value = 81.0 mm
"acr " is distance from the point considered to the surface of the nearest longitudinal bar
Applied service moment " Ms "= 70.0 KNm

CALCULATIONS
moduli of elasticity of concrete " Ec" = (1/2)*(20+0.2*fcu) = 15.0 KN/mm2
moduli of elasticity of steel " Es " = 200.0 KN/mm2
Modular ratio " a " = (Es/Ec) = 13.33
" r " = As/bd = 0.005
depth to neutral axis, "x" = (-a.r +((a.r)2 + 2.a.r)0.5.d = 79 mm

" Z " = d-(x/3) = 226


Reinforcement stress " fs " = Ms/(As*Z) = 231 N/mm2
Concrete stress " fc " = (fs*As)/(0.5*b*x) = 7.88 N/mm2
Strain at soffit of concrete beam/slab " e1 " = (fs/Es)*(h-x)/(d-x) = 0.001477
Strain due to stiffening effect of concrete between cracks " e2 " =
e2 = b.(h-x)2/(3.Es.As.(d-x)) for crack widths of 0.2 mm Used
e2 = 1.5.b.(h-x)2/(3.Es.As.(d-x)) for crack widths of 0.1 mm n/a
e2 = 0.000351
Average strain for calculation of crack width " em "= e1-e2 = 0.001126

Calculated crack width, " w " = 3.acr.em/(1+2.(acr-c)/(h-x))


CALCULATED CRACK WIDTH, 'w' = 0.20 mm
Notes

Disclaimer
All advice or information from the British Cement Association and/or Reinforced Concrete Council is intended for th
will evaluate the significance and limitations of its contents and take responsibility for its use and application. No lia
(including that for negligence) for any loss resulting from such advice or information is accepted by the BCA, RCC o
subcontractors, suppliers or advisors. Users should note that all BCA software and publications are subject to revisio
time to time and should therefore ensure that they are in possession of the latest version.

This spreadsheet should be used in compliance with the accompanying publication 'Spreadsheets for concrete design
8110 & EC2' available from British Cement Association, Telford Avenue, Crowthorne, Berkshire RG45 6YS.

Status of spreadsheet
Public release version.

Revision history RCC14 Crack Width.xls


Date Version Action
04-Aug-99 RCC14 v0.1 Renamed

Page 2
Notes

orced Concrete Council is intended for those who


sibility for its use and application. No liability
ormation is accepted by the BCA, RCC or their
are and publications are subject to revision from
test version.

ication 'Spreadsheets for concrete design to BS


Crowthorne, Berkshire RG45 6YS.

Size (kB)
81

Page 3

You might also like