USB-A 3.

0 Data Transfer Cable

USER MANUAL
 USB-A 3.0 Data Transfer Cable

Table of Contents
1. Introduction 1
1.1 Introduction
1.2 Copyright and Trademarks

2. Product Overview 2
2.1 Package Contents
2.2 Product Description
2.3 Product Features
2.4 System Requirements

3. Connection and Operation 3

3.1 Quick Start Instructions 3
3.2 Getting Started 3
3.2.1 Installation Checklist 3
3.2.2 Easy Computer Sync Software Installation 4
3.3 Data Transfer Cable Installation and Use 5
(Easy Computer Sync - Windows only)
3.3.1 Start the Easy Computer Sync Software 5
3.3.2 Mode: Synchronizing Files 5
3.3.3 Mode: Transfer Data to a New Computer 7
3.3.4 Mode: Drag & Drop Files 9
3.3.5 Mode: Remote Computer Access 9
3.4 Data Transfer Cable Installation and Use 10
(PCLinq5 – Windows & Mac)
3.4.1 PCLinq5 Software Installation 10
3.4.2 Start the PCLinq5 Software 11
3.4.3 Uninstall the PCLinq5 Program 17
3.5 Troubleshooting Notes 18
3.6 Frequently Asked Questions (FAQ) 19

4. Technical Specifications 20

5. Warranty and Support 21

5.1 Customer Support and Contact Information
5.2 Warranty Information
5.3 Limitations of Liability
 USB-A 3.0 Data Transfer Cable

1. Introduction

1.1 Introduction

Thank you for your purchase from Cable Matters Inc., the ‘Reliable Connectivity”
company. This User Manual provides an overview of the features and installation of
your new USB-A 3.0 Data Transfer Cable. For optimum performance and safety,
please read these instructions carefully before connecting, operating or configuring this
product. Please keep this manual for future reference.

Contact [email protected] for questions or product support.

1.2 Copyright and Trademarks

Specifications are subject to change without notice. Cable Matters is a registered

trademark or trademark of Cable Matters Inc. All rights reserved.

This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
Cable Matters. Where they occur, these references are for illustrative purposes only
and do not represent an endorsement of a product or service by Cable Matters, or an
endorsement of the product(s) to which this manual applies by the third-party company
in question. Regardless of any direct acknowledgement elsewhere in the body of this
document, Cable Matters hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in
this manual and related documents are the property of their respective holders.

1
 USB-A 3.0 Data Transfer Cable

2. PRODUCT OVERVIEW

2.1 Package Contents

Please check that the following items are contained in the package:

⚫ 1 x USB-A 3.0 Data Transfer Cable – 2 Meters / 6.5 Foot

⚫ 1 x Card with Easy Computer Sync and PCLinq5 software (Download from
cablematters.com/downloads)
⚫ 1 x QuickStart guide

2.2 Product Description

The Cable Matters USB-A 3.0 Data Transfer Cable is the perfect choice for migrating
your files when upgrading to a new Laptop or PC. The included Easy Computer Sync
& PCLinq5 software will also efficiently synchronize files between two computers in
much less time than using a network or cloud-based solution.

2.3 Product Features

⚫ Supports Windows XP, Vista, 7, 8, 8.1, 10, Mac OS X (Not Compatible with
Windows 10 S Mode)
⚫ Fast data transfer with High Speed USB 3.0 up to 5 Gbps
⚫ Migrate personal data directly without using a network or the internet
⚫ Post transfer report with log of files transferred and any errors
⚫ Off-line Help guide is integrated into the program
⚫ Complimentary Easy Computer Sync software license key

2.4 System Requirements (Each PC)

⚫ Supported OS system: Windows XP, Vista, 7, 8, 8.1, 10, Mac OS X
⚫ Available USB Port: USB Type A 2.0/3.0
⚫ Processor: 700 MHz or higher
⚫ System Memory: 128 MB or greater
⚫ Hard Disk Space: 200MB or higher
⚫ User Accounts with Administrator Rights in the same language
⚫ Internet access to download and update drivers

2
 USB-A 3.0 Data Transfer Cable

3. Connection and Operating Instructions

3.1 Quick Start Instructions

1. Install the Easy Computer Sync or PCLinq5 software on both

computers. Use the Registration Code (a 16-character
alphanumeric code) printed on the product for Easy Computer
Sync software.

2. Run the program from the Setup Wizard or click on the Easy
Computer Sync or PCLinq5 desktop icon to start the program.

3. Connect the Data Transfer Cable to a USB port on both computers.

4. Follow the instructions on the pop-up

Install the software for the
menus. Data Transfer Cable
BEFORE
connecting the cable
NOTES:

The Easy Computer Sync software only supports for Windows system while
PCLinq5 supports both Windows and Mac OS system.

3.2 Getting Started

3.2.1 Installation Checklist
• The Registration Code (Printed on the product) is required to install the Easy Computer
Sync software and allows the software to be installed on 4 computers.

• Install the Easy Computer Sync software first! Both the source and target computers
require 200 MB of hard disk space to install the software.

• Check for sufficient hard disk space on both computers for transferring files.

• Most transfers require Administrator access on both computers.

• Close all unnecessary programs and run a fresh virus scan before transferring data.

• Temporarily close your anti-virus software if it prevents the software installation.

• Backup files or setup a restore point before any major migration of data.

• Both computers should be connected to a power source since transfer times can vary.

• Programs installed on the source computer cannot be transferred, they must be reinstalled.

• Do not connect the Data Transfer Cable through a USB hub

3
 USB-A 3.0 Data Transfer Cable

• Operating systems on each computer must be using the same language.

• Verify that the USB ports on both computers are functioning and will transfer at a
minimum USB 2.0 rate.

Click on the question mark (or press F1) for access to the
off-line Help guide.

3.2.2 Easy Computer Sync Software Installation

Install the software
BEFORE 1.Download the Easy Computer Sync Software from
connecting the cable www.cablematters.com/downloads

2. Install the Easy Computer Sync software.

3. When prompted, click ‘YES’ to allow the program to be installed and start the Easy
Computer Sync Setup Wizard.

4. License Agreement: Click ‘I Agree’.

5. Choose Components: Create a Desktop Icon

and allow updates. (Recommended)

6. Choose Install Location: Keep the default

location and click ‘Install’. (Recommended)

7. Click ‘Finish’ and check the box to allow the

program to run.

Enter the Registration Code

200MB of Hard Disk
printed on the product. space is required on
both computers.
The Registration Code looks like
XXXX-XXXX-XXXX-XXXX and allows the software to be
installed on 4 computers.

Keep the registration code safe for future reference.

4
 USB-A 3.0 Data Transfer Cable

The software can be uninstalled from the

Control Panel > Programs

3.3 Data Transfer Cable Installation and Use

(Easy Computer Sync - Windows only)

3.3.1 Start the Easy Computer Sync Software

There are 3 ways to start the software on BOTH computers:

1. Double-click the Easy Computer Sync desktop icon on source and target
computers to start the program. Click ‘Yes’ and connect the cable.

2. Use the program from the Start Menu, Click ‘Yes’ and connect the cable.
➢ Windows XP, Vista: Start Menu > All Programs > Easy Computer Sync
➢ Windows 7, 8, 8.1, 10 Start Menu > Search for Easy Computer Sync

3. Connect the Data

Transfer Cable to the
USB ports of both
computers: Click ‘Next’
until you see

‘Connection Detected!’

➢ XP and Vista Users: If your computer does not recognize the Data Transfer Cable you
may need to update Windows drivers and check that your computer has the latest
updates.

3.3.2 Mode: Synchronizing Files

1. Select Sync Files in the Tools screen to

synchronize files BETWEEN computers.

➢ Choose a folder or create a new one to

synchronize files for one-time use or an on- going
basis.

5
 USB-A 3.0 Data Transfer Cable

2. Choose the folders to synchronize between both computers.

➢ ‘Add Folder’ button: Select to add or create additional folders.

Click on the question mark

(or press F1) for access to
the off-line Help guide.

➢ ‘Options’ Button: Changes default settings:

• Choose the file transfer direction

• Manage file conflicts

3. Select ‘Next’ to start the synchronization:

➢ If ‘Ask me what to do’ was selected from the Sync

Options Menu, a ‘File Conflict’ screen will prompt for a
choice.

6
 USB-A 3.0 Data Transfer Cable

➢ A synchronization screen will appear followed by the

‘Finished’ screen.

➢ A list of files sent and received is presented.

➢ Click ‘View Log’ to receive a detailed report of the files

transferred, including any errors.

4. Click ‘Exit’ to finish.

➢ The software will automatically close on both computers.

3.3.3 Mode: Transfer Data to a New Computer

1. Select Transfer Data to a New

Computer in the Tools screen to migrate data
from an old to a new computer.

2. The software automatically chooses default

folders to transfer or you can customize the
selections.

3. Select Old or New computer to tell the software

where to transfer the data FROM and TO.

➢ The software will search for items to transfer and

present a screen of folders

➢ The old computer displays a screen indicating

‘Transfer in Progress’

7
 USB-A 3.0 Data Transfer Cable

4. Select the items to be transferred.

➢ Click ‘Add Folder’ to select or create

additional folders.

!!! Moving or modifying

‘Protected Folders’ can
damage your computer.

➢ Choose only the necessary folders to be transferred to save disk space on the
target computer and minimize the time needed for the file transfer.

➢ Click on a drive and hit 'Properties' to open the

screen for choosing a different drive on the
target computer.

➢ Click on a folder and select ‘Properties’ to open the

screen for mapping the location of a folder on the
target computer.

5. Select ‘Next’ to start the synchronization:

➢ If there is a conflict a ‘File Conflict’ screen will prompt

for a choice.

➢ A synchronization screen
will appear followed by the
‘Finished’ screen.

➢ A list of files sent and received is presented.

8
 USB-A 3.0 Data Transfer Cable

➢ Click ‘View Log’ to receive a detailed report of the files

transferred including any errors.

6. Click ‘Exit’ to finish.

➢ The software will automatically close on both computers.

3.3.4 Mode: Drag & Drop Files

1. Select Drag & Drop Files in the Tools screen to

manually transfer files and folders BETWEEN
computers.

2. Choose files or folders and simply drag

them to the desired location.
Use caution in ‘Show’ System
Folders or Hidden Files.
Improper use could make
your computer unusable!

3. Press ‘Return to Sync’ to return to the

Main Menu.
3.3.5 Mode: Remote Computer Access

1. Selecting Control Other Computer allows you to

view the connected computer from your computer for
convenience or when you only have one monitor.

2. Connect the remote computer to the monitor to

start the Easy Computer Synch software and then
switch it back to the controlling computer.

9
 USB-A 3.0 Data Transfer Cable

➢ Control most non-security

functions with your keyboard and
mouse.

3. When finished, use ‘Back to

Tools’ or ‘Exit’ on the pull-down
menu on the top left of the
Remote Connection screen.

➢ Access the Remote Connection with

the ‘S’ icon on the Taskbar.

3.4 Data Transfer Cable Installation and Use (PCLinq5 – Windows & Mac)

PCLinq5 is a user-friendly file manager software that allows you to see and
control file directories on both computers at the same time. You can easily
drag-and-drop or cut-and-paste files and folders between computers as well
as creating new folders and changing file attributes. You can also open any
including photos and videos.

3.4.1 PCLinq5 Software Installation

1. Connect the USB-A 3.0 Data Transfer Cable to the USB ports of both
computers. You can go to the Control Panel–System–Device Manager
to view the device properties. You should see “USB-To-USB Cable
Bridge” device under the Universal Serial Bus Devices. PCLinq5
Software installer is stored within the cable, or can be
downloaded from www.cablematters.com/downloads

10
 USB-A 3.0 Data Transfer Cable

2. Install the PCLinq5 Software on both computers. The installation

process starts from the InstallShield Wizard that will guide you through
the rest of the setup process.
3. License Agreement: Click ‘I accept the terms of the license agreement’.
Follow the instructions and click Next to continue until installation is
complete.

4. After installation, click Start and Program Files and check whether the
Prolific PCLinq5 folder was created.

3.4.2 Start the PCLinq5 Software

PCLinq5 is an application used to control the file sharing and data transfer of the
linked computers (also known as the local PC and the remote PC). After you have
successfully completed the PCLinq5 installation and connected the Data Transfer

11
 USB-A 3.0 Data Transfer Cable

cable, you simply click and start PCLinq5 in both computers. The PCLinq5 File
Transfer program will appear as follows:

Mac: Windows:

Using PCLinq5, you can control both the local and remote computers and do the
following:

• Display files/folders
• Open files/folders
• Create files/folders
• Delete files/folders
• Copy/Cut/Paste files/folders
• Move files/folders
• Change file/folder names/attributes

12
 USB-A 3.0 Data Transfer Cable

Start PCLinq5:

1. Run PCLinq5 on both computers.

2. Connect 2 computers using the USB-A 3.0 Data Transfer cable.

3. Wait for Windows to detect the cable on each computer and check whether it
is properly installed. Check the Connection Status LED on the bottom right.
Make sure that the program shows two green LEDs to indicate a linked
connection.

4. Once connected, you simply drag-and-drop the files or folders you want to
transfer to the other computer. You can change disk drives or directories by
clicking on the Navigate directory menu. Use the Menu Controls for other
functions of the program.

Windows: Mac:

NOTE: You may not be able to drag-and-drop some folders and files from Windows Vista/7/8 to Windows XP due to Windows Vista/7/8
permission security feature. Permissions are rules associated with objects on a computer or network, such as files and folders. You would
need to grant permission or ownership first to those files/folders for you to be able to transfer them from your Windows Vista/7/8 to
Windows XP computer if needed. Another solution to this problem is to use your Windows XP computer to drag the files/folders from
Windows Vista/7/8 to XP.

13
 USB-A 3.0 Data Transfer Cable

5. Right-click the file or folder (example: Pictures) in Windows Vista/7/8 PC, and
then click Properties. Click the Security tab and click Edit to change
permissions.

6. Click Add button to add user.

14
 USB-A 3.0 Data Transfer Cable

7. Type “Everyone” user name to add to the group.

8. Click on the Allow boxes to grant Full control and Modify permissions. Click OK
to confirm. You can now drag-and-drop this folder from Windows Vista or 7 or 8
to XP using PCLinq5 software.

15
 USB-A 3.0 Data Transfer Cable

9. PCLinq5 also allows you open/run files found in the connected PC without
copying the files to this PC. You can directly play movie files located in the
remote PC.

10. PCLinq5 also provides Options to show hidden, read-only, system files and
directories.

16
 USB-A 3.0 Data Transfer Cable

3.4.3 Uninstalling the PCLinq5 Program

It is easy to uninstall the PCLinq5 program:
1. Unplug the Data Transfer cable and close the PCLinq5 program.

2. Go to Apps & features. Find the PCLinq5 program and click Uninstall button.

3. The PCLinq5 InstallShield Wizard program will appear. Click the Remove button
and select to remove all installed features. Make sure that you have unplugged
the Data Transfer cable and click Next to continue.

4. The PCLinq5 InstallShield Wizard program will confirm with you if you really
want to completely remove the application and features. Click Yes to uninstall.

5. Wait for the InstallShield Wizard program to complete uninstallation.

17
 USB-A 3.0 Data Transfer Cable

3.5 Troubleshooting Notes

Contact [email protected] with any questions.

My computer does not recognize the Data Transfer Cable:

Make sure that you have downloaded and installed both the Easy Computer Sync software
and the latest drivers from Windows.

Check that both LED’s are lit. Switch ends to test.

Check that the USB ports are functioning by plugging in another USB device.
Remove all other USB devices and find ‘USB-To-USB Cable Bridge’ in the Device Manager:

It should NOT have a “question” or “exclamation” mark

The file transfer speed is too slow:

Check that the computer port supports USB 3.0.

Having problems getting Easy Computer Sync to move past the connection screen:
• Check that both computers have Easy Computer Sync installed
• Check that both computers connected with the Data Transfer Cable
• Plug the Easy Transfer Cable directly into your computers (not through a hub)
• If the cable is connected, but you are stuck on the connection screen on both
computers, recheck the connection, or try using a different port on each computer.
• If you are still having problems establishing the connection, unplug all non-essential
USB devices (such as printers, scanners, external drives) from each computer.

18
 USB-A 3.0 Data Transfer Cable

3.6 Frequently Ask Questions (FAQ)

Can I transfer programs?

No, you can only transfer files and settings. Programs have to be reinstalled.

Can I use this cable with a USB Hub?

Do not use the Data Transfer Cable with a USB hub. You can use it with an active or
passive USB cable extender.

Can both computers share a monitor?

Yes. Use the ‘Control Other Computer’ function from the transfer data menu.

How do I get updates for the software?

The Easy Computer Sync automatically checks for updates unless the defaults are
changed. Check for updates manually by going to Start > Programs > Easy Computer Sync >
Get Updates.

How long will file transfers take?

The transfer time can vary depending on the speed of the source hard drive and the amount
of data to be transferred. Transfers using this cable are significantly faster than using a cloud
or network-based method.

Can I install the software before plugging in the cable?

We recommend installing the transfer software first which allows it to copy the necessary
driver files to your computers so they are ready to load when the cable is connected.

19
 USB-A 3.0 Data Transfer Cable

4. Technical Specifications

Data Transfer Cable Connectors: 2 x USB Type A - Male

OS Support USB Host: Windows XP, Vista, 7, 8, 8.1, 10, Mac OS X

LED Indicators: Blue

Cable Length: 2 Meters / 6.5 Foot

Model No: 202067

Warranty: Limited One-Year

Note: Specifications are subject to change without notice.

20
 USB-A 3.0 Data Transfer Cable

5. Warranty and Support

5.1 Customer Support and Contact Information

Cable Matters offers lifetime technical support as an integral part of our commitment to
provide industry leading solutions.

Email us with questions at [email protected].

5.2 Warranty Information

This product is backed by a limited one-year warranty. In addition, Cable Matters warrants its
products against defects in materials and workmanship for the periods noted, following the
initial date of purchase. During this period, the products may be returned for repair, or replaced
with equivalent products at our discretion. The warranty covers parts and labor costs only.
Cable Matters does not warrant its products from defects or damages arising from misuse,
abuse, alteration, or normal wear and tear.

5.3 Limitation of Liability

In no event shall Cable Matters Inc. (including their officers, directors, employees or agents)
be liable for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out
of, or related to the use of this product exceeding the actual price paid for the product. Some
states do not allow the exclusion or limitation of incidental or consequential damages. If such
laws apply, the limitations or exclusions contained in this statement may not apply to you.

Cable Matters is a registered trademark or trademark of Cable Matters Inc.

All rights reserved

21