STRUCTURAL DESIGN CALCULATION SHEET

El-shorouk Academy
The Higher Institute of Engineering
Civil Engineering Department
Graduation Project

'' Reinforced concrete project 2022 ''

Ahmed Amr Elmekawe
Under supervision of:
- Prof. Dr. SHERIF ELWAN
Structural Engineering Department
‫‪STRUCTURAL DESIGN CALCULATION SHEET‬‬

‫شكر و تقدير‬

‫الى أستاذى العزيز الذى أهدانى هذا العمل فالعقل بعجز أحيانا عن التعبير خاصة فى أمور يدركها و ال يستطيع ‪-‬‬
‫أالحاطة بها كى يكتبها‬

‫‪ :-‬لذا ‪ ,‬أتوجة بالشكر و التقدير ألى أستاذى الجليل‬

‫""أ‪ .‬د ‪ .‬م ‪ /‬شريف علواني‬

‫الذى ساهم بعلمة الغزير و التوجية المستمر و الخبرة العلمية و العمليه التى ساهمت فى أخراج هذا المشروع فى ‪-‬‬
‫‪.‬صورته النهائية‬
STRUCTURAL DESIGN CALCULATION SHEET

UNIT 1 BUILDING STRUCTURAL DESIGN CALCULATION SHEET

Table of Contents:

1: Design Criteria.
1.1: Introduction.
1.2: Units.
1.3: Building descriptions.
1.3.1: Location

1.3.2: Specifications
1.3.3: Dimension of building

1.4: Structural system

1.5: Design Building codes.
1.6: Structural Materials.
1.6.1: Concrete

1.6.2: Steel

1.7: Concrete cover

1.8: Design loads.
1.8.1: Dead Load (DL)
1.8.2: Superimposed Dead Load (SDL)
1.8.3: Live Load (LL)
1.8.5: Earthquake (EQ)

1.9: Load Combinations.

1.9.1: Case of Loading.
1.9.2: Ultimate Load Combination.
1.9.3: Working Load Combination.

1.10: Analysis and models

2: Design Of Slabs.
STRUCTURAL DESIGN CALCULATION SHEET

2.1: Design of ground floor slab.

2.1.1: Statical system plan
2.1.2: loads on plan
2.1.3: check deflection
2.1.4: slab design
2.1.5: beam design for moment
2.1.6: beam design for shear

2.3: Design of typical floor slab.

2.3.1: Statical system plan
2.3.2: loads on plan
2.3.3: check deflection
2.3.4: check punching
2.3.5: slab design
2.3.6: beam design for moment
2.3.7: beam design for shear

2.4: Design of typical floor slab.

3: Design Of Stairs.
4: Design Of Columns.
5: Design Of Core.
6: Design Of retaining wall.
7: Design Of Raft.
STRUCTURAL DESIGN CALCULATION SHEET
STRUCTURAL DESIGN CALCULATION SHEET

ETABS 3D MODEL
1: Design Criteria.
1.1: Introduction.

This document lists the criteria that will be used for the structural design of the project, It includes; the codes of practice
utilized, loading criteria, and material Selections.
The structural design concepts and structural systems are typically integrated with the architectural features of the Project
to serve the space usage, while maintaining structural integrity and serviceability

1.2: Units.
The structural calculations will be completed using the
following units.
Length: m and mm
Mass: kN and N
Force: kN
Stress: N/mm 2
Moment: kN.m / m.t

1.3: Building Descriptions.

1.3.1: Location:

This building is located at cairo, Fifth Settlement

1.3.2: Specifications:
Building consists of basement floor, ground , 2typical stories and roof .

1.3.3: Dimension of building:

ground area 1110.4 m2.

Ground floor area 555.6 m2

typical floor space 611.0 m2

1.4: Structural system

SOLID SLABS & FLAT SLABS & HOLLOW BLOCK

1.5: Design Building codes.

- Egyptian codes of practice for Design and Construction of reinforced concrete (ECP 201-2017).
- Egyptian codes of practice For Load Calculation and Forces in Structural Works (ECP 201-2012).
- Egyptian codes of practice For Soil Mechanics, Design For Construction of Foundation (ECP 202-2001).
STRUCTURAL DESIGN CALCULATION SHEET

1.6: Structural Materials.

1.6.1: Concrete:
The characteristic compressive strength of reinforced should not be less than 30 N/mm 2. After 28 days from casting with
cement content not less than 350 kg/m 3

Class F cu Location
N/mm 2
B 25 All concrete elements

1.6.2: Steel:
Ultimate
Yield or
Reinforcement Tensile Strength
Grade Proof Strength N/mm 2
Type N/mm 2

HIGH GRADE B500DWR 500 545

HIGH GRADE 42/52 420 525

MILD STEEL 24/30 240 300

1.7: Concrete cover

No. Type Soil side Air side
1 Footings 70mm 70mm
2 G. Beams 70mm 70mm
3 Slab on Grade 50mm 50mm
4 Beams &columns 25mm 25mm
5 Slabs 20mm 20mm

Page | 1
STRUCTURAL DESIGN CALCULATION SHEET

1.8: Design loads.

1.8.1: Dead Load (DL) :
These are calculated in accordance with ECP 201-2012 and the
known unit weights of materials.

No. Material weight (kN/m3)

1 Reinforced concrete 25
2 Plain concrete 22
3 Bricks walls 14
4 Steel reinforcement 78.5

1.8.2: Superimposed Dead Load (SDL):

- Consists of equivalent Wall load per squared meter on flat slabs =3.0 KN/m2.
-And load due to finishing (FC) = 2.0 KN/m2.

-And load due to finishing (FC) BATHROOM= 3.0 KN/m2.

-And load due to finishing (FC) FOR ROOF = 3 KN/m2.

1.8.3: Live Load (LL):

Live Load (LL) = 2.0 KN/m2.
Live Load (LL) BATHROOM = 3.0 KN/m2.
Live Load (LL) roof = 2.0 KN/m2.

1.8.4: Wind Load (W):

Basic wind speed 33 m/s, Exposure B

1.8.5: Earthquake (EQ):

Seismic Zone will be based on ( ECP 201-2012). recommendations at project location (Seismic zone factor=0.15). Soil
profile estimated based on geotechnical data

Page | 2
STRUCTURAL DESIGN CALCULATION SHEET

1.9: Load Combinations.

All of load combination detected according to ECP and the designed sections for the maximum load combination .

1.9.1: Case of Loading:

D.L=Dead Load
L.L=Live Load
Resp x = seismic response spectrum in X direction with 5% eccentricity
Resp y = seismic response spectrum in Y direction with 5% eccentricity
EQ STATIC X= equivalent Static seismic load in X direction with 5% eccentricity
EQ STATIC Y= equivalent Static seismic load in Y direction with 5% eccentricity
Wx= Wind Load in X-Direction
Wy= Wind Load in Y-Direction
1.9.2: Ultimate Load Combination:
U1=1.4DEAD+1.6LL
U2=1.5DEAD+1.5LL
U3=1.12DEAD+0.25LL+Resp-X
U4=1.12DEAD+0.25LL+Resp-Y
U5=1.12DEAD+0.25LL+Resp-X+0.3Resp-Y
U6=1.12DEAD+0.25LL+Resp-Y+0.3Resp-X
U7=0.9DEAD
U8=0.9DEAD+Resp-X
U9=0.9DEAD+Resp-Y
U10=0.9DEAD+Resp-X+0.3Resp-Y
U11=0.9DEAD+Resp-Y+0.3Resp-X
U12=1.12DEAD+1.28LL+1.28WIND-X
U13=1.12DEAD+1.28LL+1.28WIND-Y
U14=0.9DEAD+1.3WIND-X
U15=0.9DEAD-1.3WIND-X
U16=0.9DEAD+1.3WIND-Y
U17=0.9DEAD-1.3WIND

Page | 3
STRUCTURAL DESIGN CALCULATION SHEET

1.9.3: Working Load Combination:

W1 = 1.0 D.L + 1.0 L.L

W2=DEAD+(0.5/1.2)LL+0.7Resp-X

W3=DEAD+(0.5/1.2)LL+0.7Resp-Y

W4=DEAD+(0.5/1.2)LL+0.7(Resp-X+0.3Resp-Y).

W5=DEAD+(0.5/1.2)LL+0.7(Resp-Y+0.3Resp-X)

W6=0.9DEAD+0.7Resp-X

W7=0.9DEAD+0.7Resp-Y

W8=0.9DEAD+0.7(Resp-X+0.3Resp-Y)
W9=0.9DEAD+0.7(Resp-Y+0.3Resp-X)

W10=DEAD+LL+WIND-X

W11=DEAD+LL-WIND-X

W12=DEAD+LL+WIND-Y

W13=DEAD+LL-WIND-Y

W14=0.9DEAD+WIND-X

W15=0.9DEAD-WIND-X

W16=0.9DEAD+WIND-Y

W17=0.9DEAD-WIND-Y

1.10: Analysis and models:

The following outlines the details of analysis and design software used for the project .
ETABS 21.1.0
- ETABS will be utilized for the stability analysis of the building and analysis of vertical structural elements
- The building will analyzed in three dimensional (3D) as a model in ETABS

SAFE (Version 16.0.0)

- analysis the different types for slab systems.
- analysis of footings system.

Page | 4
STRUCTURAL DESIGN CALCULATION SHEET

Design Of Slabs.

Page | 5
STRUCTURAL DESIGN CALCULATION SHEET

2: Design Of Slabs.

Basement Floor
etabs

Page | 6
STRUCTURAL DESIGN CALCULATION SHEET

Page | 7
STRUCTURAL DESIGN CALCULATION SHEET

2.2.3: check deflection

Δ all = 4.5*100/250 = 1.8cm

Camber 1cm

Δ max=2.73-1=1.73cm

=1.73 cm ≤ 1.8 cm (SAFE)

Page | 8
STRUCTURAL DESIGN CALCULATION SHEET

2.2.5: slab design

Slab +VE bending moment in x direction 6T12/m

Page | 9
STRUCTURAL DESIGN CALCULATION SHEET

Slab +VE bending moment in Y direction 6T12/m

Page | 10
STRUCTURAL DESIGN CALCULATION SHEET

Slab -VE bending moment in X direction 6T12/m

Page | 11
STRUCTURAL DESIGN CALCULATION SHEET

Slab -VE bending moment in Y direction with 6T12/m

Page | 12
STRUCTURAL DESIGN CALCULATION SHEET

Use min. 5t8/m

Page | 13
STRUCTURAL DESIGN CALCULATION SHEET

Page | 14
STRUCTURAL DESIGN CALCULATION SHEET

Page | 15
STRUCTURAL DESIGN CALCULATION SHEET

Beam shear ultimate

Page | 16
STRUCTURAL DESIGN CALCULATION SHEET

Page | 17
STRUCTURAL DESIGN CALCULATION SHEET

2.2: Design of Typical slab

Page | 18
STRUCTURAL DESIGN CALCULATION SHEET

Page | 19
STRUCTURAL DESIGN CALCULATION SHEET

Page | 20
STRUCTURAL DESIGN CALCULATION SHEET

Page | 21
STRUCTURAL DESIGN CALCULATION SHEET

Page | 22
STRUCTURAL DESIGN CALCULATION SHEET

2.2.6: beam design for moment

DESIGN OF BEAMS USING MOMENT OF RESISTANCE

-check capacity on Beams:

Beam moment dead+live

Page | 23
STRUCTURAL DESIGN CALCULATION SHEET

Page | 24
STRUCTURAL DESIGN CALCULATION SHEET

Beam moment envelope ultimate including earthquake and wind load

Page | 25
STRUCTURAL DESIGN CALCULATION SHEET

beam shear from dead and live

Page | 26
STRUCTURAL DESIGN CALCULATION SHEET

Beam shear envelope ultimate including earthquake and wind load

Page | 27
STRUCTURAL DESIGN CALCULATION SHEET

Design of beams from ETABS

Beam longitudinal reinforcement required

Page | 28
STRUCTURAL DESIGN CALCULATION SHEET

Beam transverse reinforcement required

Page | 29
STRUCTURAL DESIGN CALCULATION SHEET

2.2: Design of Typical slab.

2.2.1: Statical system plan

Page | 30
STRUCTURAL DESIGN CALCULATION SHEET

ETABS MODEL

Page | 31
STRUCTURAL DESIGN CALCULATION SHEET

SAFE MODEL

Page | 32
STRUCTURAL DESIGN CALCULATION SHEET

2.2.2: loads on plan

FLAT SLAB

Page | 33
STRUCTURAL DESIGN CALCULATION SHEET

Page | 34
STRUCTURAL DESIGN CALCULATION SHEET

Page | 35
STRUCTURAL DESIGN CALCULATION SHEET

Page | 36
STRUCTURAL DESIGN CALCULATION SHEET

Page | 37
STRUCTURAL DESIGN CALCULATION SHEET

Page | 38
STRUCTURAL DESIGN CALCULATION SHEET

Page | 39
STRUCTURAL DESIGN CALCULATION SHEET

2.2.3: check deflection

Page | 40
STRUCTURAL DESIGN CALCULATION SHEET

MAX ACTUAL DEFLECTION = 10mm

Page | 41
STRUCTURAL DESIGN CALCULATION SHEET

2.2.4: check punching

Page | 42
STRUCTURAL DESIGN CALCULATION SHEET

2.2.5: slab design

DESIGN OF SLABS USING MOMENT OF RESISTANCE

Page | 43
STRUCTURAL DESIGN CALCULATION SHEET

Slab bending moment in x direction

Page | 44
STRUCTURAL DESIGN CALCULATION SHEET

Slab bending moment in y direction

Page | 45
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in x direction with 5T12/m

Page | 46
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in Y direction with 5T12/m

Page | 47
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in X direction with 5T10/m

Page | 48
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in X direction with 5T10/m+ 2.5T10/m ADDITIONAL

Page | 49
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in X direction with 5T10/m+ 2.5T16/m ADDITIONAL

Page | 50
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in X direction with 5T10/m+ 5T12/m ADDITIONAL

Page | 51
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in X direction with 5T10/m+ 5T16/m ADDITIONAL

Page | 52
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in Y direction with 5T10/m

Page | 53
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in Y direction with 5T10/m+ 2.5T10/m ADDITIONAL

Page | 54
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in Y direction with 5T10/m+ 2.5T16/m ADDITIONAL

Page | 55
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in Y direction with 5T10/m+ 5T12/m ADDITIONAL

Page | 56
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in X direction with 5T10/m+ 5T16/m ADDITIONAL

Page | 57
STRUCTURAL DESIGN CALCULATION SHEET

DESIGN OF SLABS USING DESIGN STRIPS

LAYER A FOR X DIRECTION
LAYER B FOR Y DIRECRTION

Page | 58
STRUCTURAL DESIGN CALCULATION SHEET

REINFORCMENT REQURIED IN X DIRECTION

Page | 59
STRUCTURAL DESIGN CALCULATION SHEET

REINFORCMENT REQURIED IN Y DIRECTION

Page | 60
STRUCTURAL DESIGN CALCULATION SHEET

ADDITONAL REINFORCMENT REQURIED ABOVE 5T10/m IN X DIRECTION

Page | 61
STRUCTURAL DESIGN CALCULATION SHEET

ADDITONAL REINFORCMENT REQURIED ABOVE 5T10/m IN Y DIRECTION

Page | 62
STRUCTURAL DESIGN CALCULATION SHEET

2.2.6: beam design for moment

Page | 63
STRUCTURAL DESIGN CALCULATION SHEET

-check capacity on Beams:

Page | 64
STRUCTURAL DESIGN CALCULATION SHEET

beam moment ULT DL+LIVE LOAD ONLY

Page | 65
STRUCTURAL DESIGN CALCULATION SHEET

beam moment from envelope ultimate

Page | 66
STRUCTURAL DESIGN CALCULATION SHEET

beam shear from envelope ultimate

Page | 67
STRUCTURAL DESIGN CALCULATION SHEET

Design of beams from ETABS

Beam longitudinal reinforcement required

Page | 68
STRUCTURAL DESIGN CALCULATION SHEET

Beam transverse reinforcement required

Page | 69
STRUCTURAL DESIGN CALCULATION SHEET

Stairs

m
2
/L.L =. 3 t
m
2
/F.C= .2 t
ts= .2 m

Page | 70
STRUCTURAL DESIGN CALCULATION SHEET

Page | 71
STRUCTURAL DESIGN CALCULATION SHEET

Page | 72
STRUCTURAL DESIGN CALCULATION SHEET

Page | 73
STRUCTURAL DESIGN CALCULATION SHEET

SESMEC
EQ STATIC X

EQ STATIC Y

Page | 74
STRUCTURAL DESIGN CALCULATION SHEET

Page | 75
STRUCTURAL DESIGN CALCULATION SHEET

EQ RESPONSE

Page | 76
STRUCTURAL DESIGN CALCULATION SHEET

wind

Page | 77
STRUCTURAL DESIGN CALCULATION SHEET

Page | 78
STRUCTURAL DESIGN CALCULATION SHEET

EARTHQUAKE CHECKS

1- CHECK PARTICAPATING MASS RATIO

Page | 79
STRUCTURAL DESIGN CALCULATION SHEET

2- CHECK ECCENITRICTY

Page | 80
STRUCTURAL DESIGN CALCULATION SHEET

SCALING CHECK

4026X0.85 = 3422 kN

Page | 81
STRUCTURAL DESIGN CALCULATION SHEET

Page | 82
STRUCTURAL DESIGN CALCULATION SHEET

Page | 83
STRUCTURAL DESIGN CALCULATION SHEET

Page | 84
STRUCTURAL DESIGN CALCULATION SHEET

DISBLACEMENT

RESPONSE -X

Page | 85
STRUCTURAL DESIGN CALCULATION SHEET

RESPONSE -Y

Page | 86
STRUCTURAL DESIGN CALCULATION SHEET

Page | 87
STRUCTURAL DESIGN CALCULATION SHEET

Columns

Page | 88
STRUCTURAL DESIGN CALCULATION SHEET

Page | 89
STRUCTURAL DESIGN CALCULATION SHEET

FOR COLUMN C1

Page | 90
STRUCTURAL DESIGN CALCULATION SHEET

Page | 91
STRUCTURAL DESIGN CALCULATION SHEET

Page | 92
STRUCTURAL DESIGN CALCULATION SHEET

FOR COLUMN C2

Page | 93
STRUCTURAL DESIGN CALCULATION SHEET

Page | 94
STRUCTURAL DESIGN CALCULATION SHEET

Page | 95
STRUCTURAL DESIGN CALCULATION SHEET

FOR COLUMN C3

Page | 96
STRUCTURAL DESIGN CALCULATION SHEET

Page | 97
STRUCTURAL DESIGN CALCULATION SHEET

Page | 98
STRUCTURAL DESIGN CALCULATION SHEET

Page | 99
STRUCTURAL DESIGN CALCULATION SHEET

FOR COLUMN C4

Page | 100
STRUCTURAL DESIGN CALCULATION SHEET

Page | 101
STRUCTURAL DESIGN CALCULATION SHEET

Page | 102
STRUCTURAL DESIGN CALCULATION SHEET

FOR COLUMN C5

Page | 103
STRUCTURAL DESIGN CALCULATION SHEET

Page | 104
STRUCTURAL DESIGN CALCULATION SHEET

FOR COLUMN C6

Page | 105
STRUCTURAL DESIGN CALCULATION SHEET

Page | 106
STRUCTURAL DESIGN CALCULATION SHEET

Page | 107
STRUCTURAL DESIGN CALCULATION SHEET

FOR COLUMN C7

Page | 108
STRUCTURAL DESIGN CALCULATION SHEET

Page | 109
STRUCTURAL DESIGN CALCULATION SHEET

Page | 110
STRUCTURAL DESIGN CALCULATION SHEET

Core and Sheer wall Design by etabs:

Page | 111
STRUCTURAL DESIGN CALCULATION SHEET

Page | 112
STRUCTURAL DESIGN CALCULATION SHEET

Page | 113
STRUCTURAL DESIGN CALCULATION SHEET

Page | 114
STRUCTURAL DESIGN CALCULATION SHEET

Page | 115
STRUCTURAL DESIGN CALCULATION SHEET

Page | 116
STRUCTURAL DESIGN CALCULATION SHEET

Page | 117
STRUCTURAL DESIGN CALCULATION SHEET

Page | 118
STRUCTURAL DESIGN CALCULATION SHEET

RETAINING WALL DESIGN

Page | 119
STRUCTURAL DESIGN CALCULATION SHEET

Page | 120
STRUCTURAL DESIGN CALCULATION SHEET

Page | 121
STRUCTURAL DESIGN CALCULATION SHEET

RAFT
STATTICAL

Page | 122
STRUCTURAL DESIGN CALCULATION SHEET

Page | 123
STRUCTURAL DESIGN CALCULATION SHEET

Page | 124
STRUCTURAL DESIGN CALCULATION SHEET

Page | 125
STRUCTURAL DESIGN CALCULATION SHEET

SOIL PRESSEUR

Page | 126
STRUCTURAL DESIGN CALCULATION SHEET

Page | 127
STRUCTURAL DESIGN CALCULATION SHEET

Page | 128
STRUCTURAL DESIGN CALCULATION SHEET

Page | 129
STRUCTURAL DESIGN CALCULATION SHEET

CHECK PUNCHING

Page | 130
STRUCTURAL DESIGN CALCULATION SHEET

DESIGN OF RAFT USING MOMENT OF RESISTANCE

Page | 131
STRUCTURAL DESIGN CALCULATION SHEET

Slab bending moment in x direction

Slab bending moment in y direction

Page | 132
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in x direction with 5T22/m

Page | 133
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in x direction with 5T22/m with 2.5T18/m additional

Page | 134
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in x direction with 5T22/m with 2.5T22/m additional

Page | 135
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in x direction with 5T22/m with 5T22/m additional

Page | 136
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in x direction with 5T22/m with 5T25/m additional

Page | 137
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in x direction with 5T22/m with 5T28/m additional

Page | 138
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in Y direction with 5T22/m

Page | 139
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in y direction with 5T22/m with 2.5T18/m additional

Page | 140
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in y direction with 5T22/m with 2.5T22/m additional

Page | 141
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in y direction with 5T22/m with 5T22/m additional

Page | 142
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in y direction with 5T22/m with 5T25/m additional

Page | 143
STRUCTURAL DESIGN CALCULATION SHEET

Slab +ve bending moment in y direction with 5T22/m with 5T28/m additional

Page | 144
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in X direction with 5T22/m

Page | 145
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in y direction with 5T22/m

Page | 146
STRUCTURAL DESIGN CALCULATION SHEET

Slab -ve bending moment in X direction with 5T22/m with 2.5T18/m additional

Page | 147
STRUCTURAL DESIGN CALCULATION SHEET

DESIGN OF SLABS USING DESIGN STRIPS

LAYER A FOR X DIRECTION
LAYER B FOR Y DIRECRTION

Page | 148
STRUCTURAL DESIGN CALCULATION SHEET

REINFORCMENT REQURIED IN X DIRECTION

Page | 149
STRUCTURAL DESIGN CALCULATION SHEET

REINFORCMENT REQURIED IN Y DIRECTION

Page | 150
STRUCTURAL DESIGN CALCULATION SHEET

ADDITONAL BOTTOM REINFORCMENT REQURIED ABOVE 5T22/m IN X DIRECTION

Page | 151
STRUCTURAL DESIGN CALCULATION SHEET

ADDITONAL TOP REINFORCMENT REQURIED ABOVE 5T22/m IN X DIRECTION

Page | 152
STRUCTURAL DESIGN CALCULATION SHEET

ADDITONAL BOTTOM REINFORCMENT REQURIED ABOVE 5T22/m IN Y DIRECTION

Page | 153
STRUCTURAL DESIGN CALCULATION SHEET

ADDITONAL TOP REINFORCMENT REQURIED ABOVE 5T22/m IN Y DIRECTION

Page | 154