Get SUNplugged

ELAN SHINE
TOPCON Series
N-type
Bifacial Transparent Backsheet Modules

ASB-M10-144-AAA (AAA=550-575)
144 Cells | 550-575 Wp| Gen-I

Highlights

Up to 30% Additional Power

575+ Wp Generation when compared with
conventional P-type module
Maximum Power
Output
No LID Loss which means more power
generation
22.4%
Maximum Efciency Better Output In Low Irradiance
Higher power output even under
low-light environments like on
cloudy or foggy days
0~+5W
Power Tolerance
Better Temperature Coefficient
Higher power generation under
higher abient temperature
Linear Performance Warranty
conditions
Adani Linear Warranty STD Linear Warranty

1.00%
1st-year Degradation

99.00%
0.40%
Annual Degradation Delivers Reliable Performance Over Time
• Full-automatic facility and industry-leading technology
87.4%
• Best-in-class durability and reliability

5 10 15 20 25 30
 N-type Bifacial 144 Half-cut cell Module

Electrical Properties STC* Engineering Drawing (Unit : mm)

Testing Condition Front Side Front Side Front Side Front Side Front Side Front Side
1133±2
Peak Power (Pmax) (W) 550 555 560 565 570 575
1092±2 11
MPP Voltage (Vmp) (V) 42.0 42.2 42.4 42.6 42.8 43.0
MPP Current (Imp) (A) 13.10 13.16 13.21 13.27 13.32 13.38 4-DRAIN CUTS

35
4 - Ø4
GROUNDING HOLES

Open Circuit Voltage (Voc) (V) 50.2 50.4 50.6 50.8 51.0 51.2

14
D
Short Circuit Current (Isc) (A) 13.87 13.93 13.99 14.05 14.11 14.17 15
FRAME CROSS SECTION
Module Efciency (%) 21.42 21.62 21.81 22.01 22.20 22.40 (SHORT SIDE)

*STC: Irradiance 1000 W/m², Cell Temperature 25°C, AM1.5 Details-D

The data above is for reference only and the actual data is in accordance with the pratical testing
Power Measurement Tolerance ±3% 4 - 10x7
INSTALLING
9
HOLES
11

2266±2
Electrical Properties NOCT*

35
1400±1
990±1
400±1
Testing Condition Front Side Front Side Front Side Front Side Front Side Front Side

Peak Power (Pmax) (W) 417 421 424 428 432 436 32

10
MPP Voltage (Vmp) (V) 39.5 39.6 39.8 40.0 40.2 40.4 C FRAME CROSS SECTION
(LONG SIDE)

MPP Current (Imp) (A) 10.56 10.61 10.65 10.70 10.74 10.79
Open Circuit Voltage (Voc) (V) 48.0 48.2 48.4 48.6 48.7 48.9
Details-C

Short Circuit Current (Isc) (A) 11.18 11.23 11.28 11.33 11.38 11.42 7

*NOCT: Irradiance 800 W/m², Ambient Temperature 20°C, Wind Speed 1 m/s

16 - 8x3.5
8 - 14x9 VENT HOLES
INSTALLING
HOLES
Earthing Symbols
4 Nos.

Operating Temperature Characteristic curve of 550Wp

Operating Temperature ( C)
o
-40~+85 16
25oC
14 1000W/m²
Maximum System Voltage (V) 1500V DC (IEC)
12
Maximum Series Fuse Rating (A) 30 800W/m²
Current (A) 10
Power Tolerance 0~+5W 600W/m²
8 I-V Characteristics
Bifaciality* 80% 6 400W/m² At Different Irradiations
4
*Bifaciality=Pmaxrear STC/Pmax front STC Bifaciality tolerance:±5% 200W/m²
2
0
0 10 20 30 40 50 60
Temperature Coefficient Voltage (V)

Temperature Coefcient of Pmax* -0.31%/oC 600

25oC
Temperature Coefcient of Voc -0.260%/oC 500 1000W/m²
800W/m²
Tem perature Coefcient of Isc +0.046%/ C
o
400 600W/m²
Power (W)

400W/m²
Nominal Operating Cell Temperature (NOCT) 42±2oC 300
200W/m² P-V Characteristics At
*Temperature Coefficient of Pmax±0.03%/ 200 Different Irradiations

100

0
Mechanical Properties 0 10 20 30 40 50 60

Voltage (V)
Cell Size 182.00mm*91.00mm
16
Number of Cells 144 Halfcut 1000 W/m²
14
Module Dimension 2266mm*1133mm 12
10oC
Current (A)

10
Weight 28kg 25oC
8 40 C
o

Front 3.2mm 6 55oC I-V Characteristics

70oC
At Different Temperatures
Rear Transparent Backsheet 4
2
Frame Anodized Aluminium Alloy 0
0 10 20 30 40 50 60
Junction Box . 3 diodes ̀
Voltage (V)
Length of Cable 4.0mm², 300mm (Cable length can be customized)

With Different Power Generation Gain regarding 550W as an example Packaging Configuration
Power Gain Peak Power MPP Voltage MPP Current Open Circuit Short Circuit Packing Type 40'HQ
Voltage Current
(%) (Pmax) (W) (Vmp) (V) (Imp) (A) Piece/Pallet 31
(Voc) (V) (Isc) (A)
Pallet/Container 20
10 594 42.0 14.13 50.2 14.97
Piece/Container 620
15 616 42.0 14.65 50.2 15.51
20 638 42.1 15.17 50.3 16.06 *The specification and key features described in this datasheet may deviate slightly
and are not guaranteed. Due to ongoing innovation, R&D enhancement Adani Solar
25 660 42.1 15.69 50.3 16.61 reserves the right to make any adjustment to the information described herein at any
time without notice. Please always obtain the most recent version of the datasheet
30 682 42.1 16.20 50.3 17.16 which shall be duly incorporated into the binding contract made by the parties
governing all transactions related to the purchase and sale of the products described
herein.

Warranty and certifications

Product warranty** 12 years of product warranty
Performance guarantee** Power degradation <1.00% in first year <0.40% / year in 2-30
years Approvals and certificates*: IEC 61215 Ed2, IEC 61730, IEC 61701, UL 61730, MCS,
JET, CEC, CEC-Aus, IEC 62716, IEC 62782, IEC 60068-2-68, IEC 61853, BIS
*All certifications are under process
Preliminary Datasheet
 ELAN SHINE
Series
Bifacial PV Modules with Dual Glass,
MBB P-Type PERC Half-cut

ASB-M10-144-AAA (AAA=520-545)
144 Cells | 520-545 Wp

Highlights

Higher generation due to bifacial technology

MBB cell technology - Up to 70 ± 5 %

excellent anti- bifaciality Factor
microcracking performance
with more balanced interior
stress: grid pattern
current path, lower cost

Longer Product life and Least degradation for LID

performance -0.45% year & LeTID
over year degradation with
30 years warranty on power
Warranty based on Power

Adani Linear Warranty STD Linear Warranty

98.00%
Modules made with Ga Excellent PID
doped wafer with resistance
Smart soldering

84.95%

5 10 15 20 25 30
 Dimensions in mm

Technical Data
Multi Irradiance Curve
Bifacial M10-144 HC Cell Module
Cell temp: 25°C

14 2
Incidence Irradiance = 1000 W/m
540 Wp

12
2
Incidence Irradiance = 800 W/m
433 Wp
10

Current (A)
2
Incidence Irradiance = 600 W/m 324 Wp
8

2
6 Incidence Irradiance = 400 W/m 214 Wp

4
2
Incidence Irradiance = 200 W/m 105 Wp
2

0
0 10 20 30 40 50 60
Voltage (V)

Peak power, (0 ~+ 4.99 Wp)

Pmax(Wp) 520 525 530 535 540 545 TC of open circuit voltage ( ) -0.30% /°C
Maximum voltage, Vmpp (V) 41.18 41.34 41.49 41.64 41.80 41.94
TC of short circuit current ( ) 0.050% /°C
Maximum current, Impp (A) 12.65 12.72 12.79 12.86 12.93 13.01
TC of power ( ) -0.38% /°C
Open circuit voltage, Voc (V) 48.60 48.78 48.95 49.12 49.32 49.48
Short circuit current, Isc (A) 13.41 13.48 13.55 13.63 13.71 13.79 Maximum system voltage 1500 VDC (IEC & UL)
Module efficiency (%) 20.25 20.44 20.64 20.83 21.03 21.22 NOCT 45°C ± 2°C
Air Temperature range -40°C to + 85°C

Electrical Characteristics with different rear side

power gain (Reference 525 Wp Front) 2266 mm
1133 mm
35 mm
Bifaciality Gain 10% 15% 20% 25% 33.5 kg
Peak power, (0 ~+ 4.99 Wp) Pmax(Wp) 575 600 630 650 IP68; Junction box
Maximum voltage, Vmpp (V) 41.35 41.35 41.36 41.36 300 mm length cable, MC4 compatible
Maximum current, Impp (A) 13.89 14.50 15.25 15.75 connectors
Open circuit voltage, Voc (V) 48.36 48.36 48.36 48.36 Class A (Safety class II)
Short circuit current, Isc (A) 15.01 15.66 16.47 17.01 High Transmission ARC, Heat
Strengthened Glass 2.0 mm
Module efficiency (%) 22.39 23.37 24.54 25.32
144 Half-cut mono-crystalline P-type
PERC bifacial solar cells; Multi bus bar
Packaging Configuration High volume resistivity and low MVTR
Semi Tempered Glass -2.0 mm
Anodized Frame
Pallets / Container 20 Pieces / Container 620 Design Mechanical load 3600 Pa-downward; 1600 Pa-Upward
Safety Factor for Mechanical load
MSEL/MDL/PM/Rev06

1.5
Note:
• The specifications included in this datasheet are subject to change without notice. 30 A
• The electrical data given here is for reference purpose only.
• Please confirm your exact requirements with the sales representative while placing your order.
*Caution: ** Warranty:
Please read safety and installation instructions before using the product. Please read Adani solar warranty documents thoroughly.

Warranty and certifications

Product warranty** 12 years of product warranty
Performance guarantee** Power degradation <2.0% in first year <0.45% / year in 2-30 years
Approvals and certificates* : IEC 61215, IEC 61730, BIS, UL 61730, IEC 61853,IEC 62716,
# IEC 60068-2-68, IEC 61701, IEC 62716, IEC 61853-2
# Certifications are under process
 ELAN SHINE
Series
Bifacial PV Modules with Transparent
Backsheet, MBB P-Type PERC Half-cut

ASB-M10-144-AAA (AAA=520-545)
144 Cells | 520-545 Wp

Highlights

Higher generation due to bifacial technology

MBB cell technology - Up to 70 ± 5 %

excellent anti- bifaciality Factor
microcracking performance
with more balanced interior
stress: grid pattern
current path, lower cost

Longer Product life and Least degradation for LID

performance -0.45% year & LeTID
over year degradation with
30 years warranty on power
Warranty based on Power

Adani Linear Warranty STD Linear Warranty

Guaranteed Power Performance

98.00%
Modules made with Ga Excellent PID
doped wafer with resistance
Smart soldering

84.95%

5 10 15 20 25 30
Years
 Dimensions in mm

Technical Data
Multi Irradiance Curve
Bifacial M10-144 HC Cell Module
Cell temp: 25°C

14 2
Incidence Irradiance = 1000 W/m
535 Wp

12
2
Incidence Irradiance = 800 W/m
429 Wp
10

Current (A)
2
Incidence Irradiance = 600 W/m 321 Wp
8

2
6 Incidence Irradiance = 400 W/m 212 Wp

4
2
Incidence Irradiance = 200 W/m 103 Wp
2

Short side Long side

0
Frame Frame 0 10 20 30 40 50 60
Voltage (V)

Peak power, (0 ~+ 4.99 Wp)

Pmax(Wp) 520 525 530 535 540 545 TC of open circuit voltage ( ) -0.26% /°C
Maximum voltage, Vmpp (V) 41.18 41.34 41.49 41.64 41.80 41.94
TC of short circuit current ( ) 0.054% /°C
Maximum current, Impp (A) 12.65 12.73 12.79 12.86 12.93 13.01
TC of power ( ) -0.32% /°C
Open circuit voltage, Voc (V) 48.60 48.78 48.95 49.12 49.32 49.48
Short circuit current, Isc (A) 13.41 13.48 13.55 13.63 13.71 13.79 Maximum system voltage 1500 VDC (IEC & UL)
Module efficiency (%) 20.25 20.44 20.64 20.83 21.03 21.22 NOCT 45°C ± 2°C
2 0
*STC: Irradiance 1000 W/m , cell temperature 25 C, Air Mass AM 1.5 according to EN 60904-3. Temperature range -40°C to + 85°C
Average efficiency reduction is approx 3% at 200 W/m2 according to EN 60904-1. Except Pmpp,
all other parameters have tolerance of +/-3%, measurement uncertainty <3%.

Electrical Characteristics with different rear side

power gain (Reference 525 Wp Front) 2266 mm
1133 mm
35 mm
Bifaciality Gain 10% 15% 20% 25% 28.0 kg
Peak power, (0 ~+ 4.99 Wp) Pmax(Wp) 575 600 630 650 IP68; Junction box
Maximum voltage, Vmpp (V) 41.34 41.35 41.36 41.37 300 mm length cable, MC4 compatible
Maximum current, Impp (A) 13.89 14.51 15.24 15.72 connectors
Open circuit voltage, Voc (V) 48.36 48.36 48.36 48.36 Class A (Safety class II)
Short circuit current, Isc (A) 15.01 15.66 16.47 17.01 High Transmission ARC glass 3.2 mm
Module efficiency (%) 22.39 23.37 24.54 25.32 144 Half-cut mono-crystalline P-type
PERC bifacial solar cells; Multi bus bar
High volume resistivity and low MVTR
Packaging Configuration Transparent Backsheet
Anodized Frame
Design Mechanical load 3600 Pa-downward; 1600 Pa-Upward
Pallets / Container 20 Pieces / Container 620
Safety Factor for Mechanical load 1.5
MSEL/MDL/PM/Rev06

Note: 30 A
• The specifications included in this datasheet are subject to change without notice.
• The electrical data given here is for reference purpose only.
• Please confirm your exact requirements with the sales representative while placing your order.
*Caution: ** Warranty:
Please read safety and installation instructions before using the product. Please read Adani solar warranty documents thoroughly.

Warranty and certifications

Product warranty** 12 years of product warranty
Performance guarantee** Power degradation <2.0% in first year <0.45% / year in 2-30 years
Approvals and certificates* : IEC 61215, IEC 61730, UL 61730, BIS, IEC 61853-1, IEC 62782,
IEC 61853-2, IEC 61701, IEC 60068-2-68, IEC 62716
 ETERNAL SHINE
Series
Monofacial PV Modules
MBB P-Type PERC Half-cut

ASM-M10-144-AAA (AAA=520-545)
144 Cells | 520-545 Wp

Highlights

MBB cell technology with High module

10BB, smart soldering conversion efficiency
upto 21.22%

Warranty based on Power

Adani Linear Warranty STD Linear Warranty

100% 98.00%

95%
Excellent low light Least degradation for LID &
performance LeTID with Ga Doped wafer
technology
90%

85% 84.80%

80%

75%
5 10 15 20 25 30
Excellent anti-micro Excellent PID resistance
cracking performance with
more balanced interior
stress: grid pattern
current path
 Dimensions in mm

Technical Data
Multi irradiance curve
Monofacial M10-144 HC Cell Module
Cell temp: 25°C

14 Incidence Irradiance = 1000 W/m2 540 Wp

12
2
Incidence Irradiance = 800 W/m
430 Wp
10

Current (A)
2
Incidence Irradiance = 600 W/m 319 Wp
8

6 Incidence Irradiance = 400 W/m

2
210 Wp

4
2
Incidence Irradiance = 200 W/m 102 Wp
2

0
0 10 20 30 40 50 60
Short side Long side
Voltage (V)
Frame Frame

Peak power, (0 ~+ 4.99 Wp)

Pmax(Wp) 520 525 530 535 540 545 TC of open circuit voltage ( ) -0.28% /°C
Maximum voltage, Vmpp (V) 41.18 41.34 41.49 41.64 41.80 41.94 TC of short circuit current ( ) 0.048% /°C
Maximum current, Impp (A) 12.65 12.72 12.79 12.86 12.93 13.01
TC of power ( ) -0.37% /°C
Open circuit voltage, Voc (V) 48.60 48.78 48.95 49.12 49.32 49.48
Short circuit current, Isc (A) Maximum system voltage 1500 V (IEC & UL)
13.41 13.48 13.55 13.63 13.71 13.79
Module efficiency (%) 20.25 20.44 20.64 20.83 21.03 21.22 NOCT 45°C ± 2°C
*STC: Irradiance 1000 W/m², cell temperature 25°C, Air mass AM 1.5 according to EN Temperature range -40°C to + 85°C
60904-3.Average efficiency reduction is approx. 3% at 200 W/m² according to EN
60904-1. Expect Pmpp, all other parameter have tolerance of +/-3%, measurement
uncertainty <3%.

2266 mm
Electrical Characteristics at NOCT** 1133 mm
35 mm
28.0 kg
Pmax(Wp)-NOCT 390 393 397 401 405 408 IP68; Junction box
Maximum voltage, Vmpp (V) 38.39 38.54 38. 68 38. 82 38. 98 39.10 300 mm length cable, MC4 compatible
Maximum current, Impp (A) 10.16 10.22 10.27 10.33 10.38 10.4 6 connectors
Open circuit voltage, Voc (V) 45. 43 45.76 45.92 46.09 46.28 46.42 Class A (Safety class II)
High transmittance ARC glass-3.2 mm
Short circuit current, Isc (A) 10.90 10.96 11.02 11.08 11.13 11.22
144 Half-cut mono-crystalline
**NOCT irradiance 800 W/m², ambient temperature 20°C, wind speed 1 m/sec P-type PERC solar cells;
All parameter have a tolerance of +/-3 %, measurement uncertainty <3 % Multi bus bar
Packaging Configuration High volume resistivity and low MVTR
White Backsheet
Anodized Frame
Pallets / Container 20 Pieces / Container 620 3600 Pa-downward; 1600 Pa-upward
Design Mechanical load
MSEL/MDL/PM/Rev02

Safety Factor for Mechanical load 1.5

Note:
25 A
• The specifications included in this datasheet are subject to change without notice.
• The electrical data given here is for reference purpose only.
• Please confirm your exact requirements with the sales representative while placing your order.
*Caution: ** Warranty:
Please read safety and installation instructions before using the product. Please read Adani solar warranty documents thoroughly.

Warranty and certifications

Product warranty** 12 years of product warranty
Performance warranty** Power degradation <2.0% in first year and <0.55% / year in 2-25 years
Approvals and certificates :
IEC 61215, IEC 61730, UL 61215, UL 61730, BIS, IEC 61853-1,IEC 62782,IEC 61701, IEC 61853-2
IEC 60068-2-68, IEC 62716
Corporate Headquarters Manufacturing Unit
Adani Corporate House, Shantigram, S G Mundra Solar PV Ltd.
Highway, Ahmedabad-382421, Gujarat, India Revenue Survey No: 180/P
CIN: U74999GJ2015PLC083378 City: Kutch Taluka: Mundra, Village:
Tunda, Post Office: Bidada; Pin: 370421
Tel: +91 79 2555 5555 | Fax: +91 79 2555 5500
E-mail: [email protected]
www.adanisolar.com