Scribd
Upload
24 views

Network Topology

Uploaded by

Rachana Kamarthi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
24 views

Network Topology

Uploaded by

Rachana Kamarthi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Physical Topology

The term physical topology refers to the way in which a network is laid out
physically. Two or more devices connect to a link; two or more links form a topology.
The topology of a network is the geometric representation of the relationship of all
the links and linking devices (usually called nodes) to one another.
There are four basic topologies possible: mesh, star, bus, and ring

MESH:
A mesh topology is the one where every node is connected to every other node
in the network.

A mesh topology can be a full mesh topology or a partially connected mesh


topology.

In a full mesh topology, every computer in the network has a connection to


each of the other computers in that network. The number of connections in this
network can be calculated using the following formula (n is the number of computers
in the network): n(n-1)/2 In a partially connected mesh topology, at least two of the
computers in the network have connections to multiple other computers in that
network. It is an expensive way to implement redundancy in a network. In the event
that one of the primary computers or connections in the network fails, the rest of the
network continues to operate normally.
Advantages of a mesh topology
 Can handle high amounts of traffic, because multiple devices can transmit
 data simultaneously.
 A failure of one device does not cause a break in the network or transmission
 of data.
 Adding additional devices does not disrupt data transmission between other
 devices.
Disadvantages of a mesh topology
 The cost to implement is higher than other network topologies, making it a
less desirable option.
 Building and maintaining the topology is difficult and time consuming.
 The chance of redundant connections is high, which addsto the high costs
and potential for reduced efficiency.
STAR:

A star network, star topology is one of the most common network setups. In
this configuration, every node connects to a central network device, like a hub,
switch, or computer. The central network device acts as a server and the
peripheral devices act as clients. Depending on the type of network card used in
each computer of the star topology, a coaxial cable or a RJ-45 network cable is
used to connect computers together.
Advantages of star topology
 Centralized management of the network, through the use of the central
computer, hub, or switch.
 Easy to add another computer to the network.
 If one computer on the network fails, the rest of the network continues to
 function normally.
 The star topology is used in local-area networks (LANs), High-speed LANs
 often use a star topology with a central hub.
Disadvantages of star topology
 Can have a higher cost to implement, especially when using a switch or
router as the central network device.
 The central network device determines the performance and number of
nodes the network can handle.
 If the central computer, hub, or switch fails, the entire network goes down
and all computers are disconnected from the network
BUS:

a line topology, a bus topology is a network setup in which each computer


and network device are connected to a single cable or backbone.
Advantages of bus topology
 It works well when you have a small network.
 It's the easiest network topology for connecting computers or peripherals
 in a linear fashion.
 It requires less cable length than a star topology.

Disadvantages of bus topology


 It can be difficult to identify the problems if the whole network goes down.
 It can be hard to troubleshoot individual device issues.
 Bus topology is not great for large networks.
 Terminators are required for both ends of the main cable.
 Additional devices slow the network down.
 If a main cable is damaged, the network fails or splits into two.
RING:
.

A ring topology is a network configuration in which device connections create


a circular data path. In a ring network, packets of data travel from one device to
the next until they reach their destination. Most ring topologies allow packets to
travel only in one direction, called a unidirectional ring network. Others
permit data to move in either direction, called bidirectional.
The major disadvantage of a ring topology is that if any individual connection in
the ring is broken, the entire network is affected.
Ring topologies may be used in either local area networks (LANs) or wide area
networks (WANs).
Advantages of ring topology
 All data flows in one direction, reducing the chance of packet collisions.
 A network server is not needed to control network connectivity between
each workstation.
 Data can transfer between workstations at high speeds.
 Additional workstations can be added without impacting performance of
the network.
Disadvantages of ring topology
 Alldata being transferred over the network must pass through each
workstation on the network, which can make it slower than a star topology.
 The entire network will be impacted if one workstation shuts down.
 The hardware needed to connect each workstation to the network is more
expensive than Ethernet cards and hubs/switches.
Hybrid Topology
A network can be hybrid. For example, we can have a main star topology with each
branch connecting several stations in a bus topology as shownin
Figure

You might also like