Subject: DSP Time:PM toPM.

Marks:10M
NOTE: Answer any TWO of the Following (Each Carries: 5Marks)

1.(a) Find the impulse response of the system described by the following difference equation: Assume all
initial conditions are zero. [BTL1,CO1] (3M)
y(n)-2y(n-1)+4y(n-2)=x(n)+x(n-1)
(b) What is the necessary and sufficient condition on the impulse response for stability And Causal. Test
the Given condition is LTI ,Causal y(n) =ex(n) [BTL1,CO1](2M)
………………………………………………………………………………………………………………………
2.(a) Find the 8-point DFT of {2,1,1,1} using DIT-FFT. Draw the signal flow graph for N=8 with intermediate values.
[BTL1,CO2](3M)
(b) Compare analog and digital filters [BTL2,CO3](2M)
……………………………………………………………………………………………………………………
3.a) Find the y(n) for the sequences x(n)={1,-1,1,2,1,0,1,-4,3,2,1,0,1,1} and h(n)={1,1,2,1}
using overlap-save method. [BTL1,CO2] (3M)

b) What are the properties of the bilinear transformation? [BTL1 CO-3](2M)

……………………………………………………………………………………………………………
4(a)Describe the interpolation process I with Decimation factor D and obtain the necessary expressions.
[BTL-2 CO- 1 ] (2M)
(b) Discuss the relation between DFT and Z-transform.Find The IDFT of X(K)={1,0,-j,0} [BTL -3,C02 ] (3M)
BRANCH: ECE Date: 02/05/2022(AN)
Subject: DSP Time:PM toPM.
Marks:10M
NOTE: Answer any TWO of the Following (Each Carries: 5Marks)

1.(a) Find the impulse response of the system described by the following difference equation: Assume all
initial conditions are zero. [BTL1,CO1] (3M)
y(n)-2y(n-1)+4y(n-2)=x(n)+x(n-1)
(b) What is the necessary and sufficient condition on the impulse response for stability And Causal. Test
the Given condition is LTI ,Causal y(n) =ex(n) [BTL1,CO1](2M)
………………………………………………………………………………………………………………………
2.(a) Find the 8-point DFT of {2,1,1,1} using DIT-FFT. Draw the signal flow graph for N=8 with intermediate values.
[BTL1,CO2](3M)
(b) Compare analog and digital filters [BTL2,CO3](2M)
……………………………………………………………………………………………………………………
3.a) Find the y(n) for the sequences x(n)={1,-1,1,2,1,0,1,-4,3,2,1,0,1,1} and h(n)={1,1,2,1}
using overlap-save method. [BTL1,CO2] (3M)

b) What are the properties of the bilinear transformation? [BTL1 CO-3](2M)

……………………………………………………………………………………………………………
4(a)Describe the interpolation process I with Decimation factor D and obtain the necessary expressions.
[BTL-2 CO- 1 ] (2M)
(b) Discuss the relation between DFT and Z-transform.Find The IDFT of X(K)={1,0,-j,0} [BTL -3,C02 ] (3M)

BRANCH: ECE Date: 02/05/2022(AN)

Subject: DSP Time:PM toPM.
Marks:10M

1. a).What is Causality and stability? 2M [BTL-1] CO-1

b).For each Impulse response listed below, determine whether the corresponding system is i).causal, ii).stable
i).h(n)=e2nu(n–1) ii).h(n)=2nu(-n) 3M [BTL-3] CO-1
2. a). A digital system is characterized by the following difference equation: Y(n)=x(n)+ay(n-1) Assuming
that the system is relaxed initially, determine its impulse response 3M [BTL-3] CO-1
b). If x(n) is a causal sequence, find Z transform of the following sequences
i) x(n) = nu(n) ii) x(n)=nu(n-1) 2M [BTL-3] CO-2
3. a). Find the output y(n) of a filter whose impulse response is h(n)={1,1,1} and input signal
x(n)={3,-1,0,1,3,2,0,1,2,1} Using overlap add method. 3M [BTL-2] CO-2
b).Find the IDFT of the sequence X(K)={10,-2+2J,-2,-2-2J} 2M [BTL-3] CO-2
4. a). Find Linear convolution of following sequences using DFT approach 3M [BTL-2] CO-2
x(n)={1,0,2},h(n)={1,1}
b). Compare analog and digital filters and write the advantages of digital filters over analog filter 2M [BTL-3] CO-3

Marks:10M
1. a). What are the Advantages and Applications of DSP. 2M [BTL-1] CO-1
b).Consider a discrete time system characterized by the following input output relationship
y(n)=x(n-2) – 2x(n-17). Determine whether the system is memory less, time invariant, linear, causal and stable.
3M [BTL-3] CO-1
2. a). List the applications of Z Transform 2M [BTL-1] CO-1
b). Realize the second order digital filter using direct form II
y(n)= 0.5y(n-1)-0.25y(n-2)+x(n)+x(n+1) 3M [BTL-2] CO-1
3. a) List the properties of DFT. 2M [BTL-3] CO-2
b). Find the output y(n) of a filter whose impulse response is h(n)={1,1,1} and input signal
x(n)={3,-1,0,1,3,2,0,1,2,1} Using overlap save method. 3M [BTL-3] CO-2
4. a). Compute the 8-point DFT of the sequence x(n)={1 :0≤n≤7
0 : otherwise}; by using DIF algorithm. 3M [BTL-1] CO-2
b). Compare analog and digital filters and write the advantages of digital filters over analog filter 2M [BTL-3] CO-3

III B.Tech II Semester I– MID EXAMINATIONS – May-2021

BRANCH: ECE Date: 02/05/2022(AN)
Subject: DSP Time:PM toPM.
Marks:10M
1. a). What are the Advantages and Applications of DSP. 2M [BTL-1] CO-1
b).Consider a discrete time system characterized by the following input output relationship
y(n)=x(n-2) – 2x(n-17). Determine whether the system is memory less, time invariant, linear, causal and stable.
3M [BTL-3] CO-1
2. a). List the applications of Z Transform 2M [BTL-1] CO-1
b). Realize the second order digital filter using direct form II
y(n)= 0.5y(n-1)-0.25y(n-2)+x(n)+x(n+1) 3M [BTL-2] CO-1
3. a) List the properties of DFT. 2M [BTL-3] CO-2
b). Find the output y(n) of a filter whose impulse response is h(n)={1,1,1} and input signal
x(n)={3,-1,0,1,3,2,0,1,2,1} Using overlap save method. 3M [BTL-3] CO-2
4. a). Compute the 8-point DFT of the sequence x(n)={1 :0≤n≤7
0 : otherwise}; by using DIF algorithm. 3M [BTL-1] CO-2
b). Compare analog and digital filters and write the advantages of digital filters over analog filter 2M [BTL-3] CO-3
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 10

I. Choose the correct alternative:

1. In the Sampling Rate convertion sampling rate is [ ]
a)Decimated b)Interpolated c)both d)none

2.The filter in Decimator acts as [ ]

a)Anti Imaging b)Anti aliasing C)both d)None of the these

3. The complex valued phase factor/twiddle factor, WN can be represented [ ]

as a)e-j2πN b) e-j2π/N c) e-j2π d) e-j2πNK

4. Given that y(n) = x(-n), then the system is [ ]

a)Causal b)Time invariant c)Non-Causal d)Causal & time invariant

5. The number of complex additions of direct DFT [ ]

is a)N b)N(N-1) c)N(N+1) d)N2

6. The DFT of the sequence x(n) = ∂(n) is [ ]

a)n∂(n) b)1 c) e-j2π d)none of these

7. Analog Filters are [ ]

a)Butterworth b)Chebyshev c)IIM d)Elliptical

8.An LTI Discrete time system is causal if and only if [ ]

a)h(n)≠0 for n<0 b)h(n)=0 for n<0 c)h(n)≠ for n<0 d)h(n)≠0 for n>0

9. Linear convolution of two sequences N1 and N2 produces an output sequence of length[ ]

a)N1 – N2 +1 b)N1 + N2 –1 c)N1 + N2 +1 d)2N1 – N2 +1

10. The Phase Function of Frequency Response H(ejw)is [ ]

a)Symmetric b)Antisymmetric c)Both d)None of the these
II. Fill in the Blanks:

11. The number of complex multiplications of radix-2 FFT is ……

12. Check the Given System is Linear /Non- linear y(n)=log(x(n)……………………

13. Find the circular convolution of x(n)={1 2 3} and h(n)={5 6}……………………

14. Purpose of filter in Interpolator……………………….

15. Write the Circular frequency shift property………

16. Draw the Butterfly Diagram for DITFFT algorithm

17. FFT stands for ………………….

18. If the response of the system depends on past or future samples then the system is called……

19. The N-point IDFT of X(K) is x(n) is equal to ………………

20. In.................method the overlapped samples in one of the output sequences are discarded.