Scribd
Upload
120 views

Pdms Cmds

The document lists 65 commands for piping in a DMS including commands to add, remove, move, connect, and modify piping elements as well as check properties, specifications, and connections of piping elements. It also provides instructions for adding attributes and notes for drain pipes. The commands allow positioning and rotating pipes through points, lines, and elements as well as changing specifications, lengths, diameters, and connections between piping elements.

Uploaded by

Shree Biradar
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
120 views

Pdms Cmds

The document lists 65 commands for piping in a DMS including commands to add, remove, move, connect, and modify piping elements as well as check properties, specifications, and connections of piping elements. It also provides instructions for adding attributes and notes for drain pipes. The commands allow positioning and rotating pipes through points, lines, and elements as well as changing specifications, lengths, diameters, and connections between piping elements.

Uploaded by

Shree Biradar
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 6

-- Add the CE ADD CE -- Add CE Pipe Connection Ref ADD CREF -- Add CE with column 35 (See Colour Sheet)

ADD CE COL 35 -- Add all disciplines that overlap CE ADD ALL WITHIN VOL CE -- Add all disciplines that overlap CE with a volume of 100mm all round ADD ALL WITHIN VOL CE 100 -- Add all Sections that overlap CE ADD ALL SCTN WITHIN VOL CE -- Add all Equipment that overlaps CE ADD ALL EQUIP WITHIN VOL CE -- Add Site ADD SITE Remove unwanted Aids from the 3D View: AID CLEAR LINE ALL -- Move CE to a new cursor position AT @ -- Move CE to a selected P-Point AT IDP@ -- Move CE to a Selected P-Line AT IDPL@

DMS COMMANDS PIPING COMMANDS 1. ADD ALL PIP 2. REM ALL PIP 3. MOVE U THROU IDP@ 4. MOVE E THROU IDP@

5. MOVE W THROU IDP@ 6. MOVE N THROU IDP@ 7. MOVE S THROU IDP@ 8. Q DTXR (To See Name Of Component) 9. Q STEXT 10. STEXT NOTE (Naming For Attachment) 11. Q ATT (To see the attributes) 12. REPR INSU ON/OFF UPDATE 13. Q ISPEC (To see the insulation) 14. ISPEC NULREF (To Remove the Insulation) 15. CONN NEXT (Connection to next element) 16. FCONN (For force connection) 17. DIST 500

18. AXES AT PH (To see Axes of Pipe Head) 19. AXES AT PT (To see Axes of Pipe Tail) 20. AXES OFF 21. BY U 500 22. BY D 500 23. BY E 500 24. BY W 500 25. BY S 500 26. BY N 500 27. Q NAME 28. ROTATE BY 45 (Rotated command) 28. ROTATE BY 45 (Rotated command) 29. ROT BY 90 ABOUT Z THRO ID@ (Rotated) 30. Q PARA (To check nozzle size)

31. Q CATREF (To See nozzle Rating) 32. Q POS IN WORLD 33. CH CE (check current element) 34. Q SPREF (check piping Spec) 35. Q ORI (To see the orientation) 36. DIR D (Direction Down) U E W N S (For elbow, tee, valve) 37. Q P1/P2/P3 (To see pipe Bore Direction Connection type and Position) 38. Q HBORE 39. Q TBORE 40. Q LBORE 41. NEW BRA COPY PREV BY E/W/S/N/U/D 100 42. Q U (To see the elevation) 43. Q ANGLE (For change the angle) 44. THRO NEXT (To connect element to next component) 45. Q LTLE (To cheek pipe length) 46. Q MEM 47. Q RTEX OF DETREF (To see element type and detail)

48. CONN IDP@ TO IDP Q CE 49. Q PL (For Direction and position) 50. BRA CONN PH TO FIST MEM 51. BRA CONN PT TO NOZZ ID@ 52. BRA CONN PT TO LAST 53. RAD 500 (Control Valve Radius) 54. HEI 500 (Control Valve Height) 55. BACK (Backward) 56. FORW (Forward) 57. For Drain pipe a. ADD ATT (For isometric note) b. Q ATT c. TCONN OPEN d. Q STEXT e. STEXT DRAIN POINT 58. For Slope Line /Rotated Elbow a. FORWARDS (Select in piping components) b. DIR TOW NEXT

c. BACKWARDS (Select in piping components) d. DIR TOW NEXT 59. MTOC DOTD (Do not want in bill of material) You can see the Doted DOTD 60. MTOC ON (Want in bill of material) 61. MTOC OFF (Dont Want in bill of material) 62. Q PA BOP/TOP (To see the pipe BOP/TOP) 63. Q LSTUBE (To Change the spec Brake) 64. Q PSPEC (To see the pipe spec) 65. CONN PH TO P3 OF ID@ ( AND SELECT THE PIPE P3) 66. CONN PT TO LAS MEM Courtesy : Anand Todkar

You might also like