WIND LOAD (ASCE 7 – 05)

TEDDS calculation version 1.2.04

Classification summary
Structure is a building
Structure is Rigid
Mean roof height; h = 13.0 ft
Horizontal dimension parallel to wind; L = 173.0 ft
Horizontal dimension normal to wind; B = 70.0 ft
Roof angle;  = 8.0 deg
Wind force resisting element is part of main wind force resisting system
Structure is enclosed
Structure is low rise
Procedure
Occupancy category (table 1-1); Category = 2
Basic wind speed (sect. 6.5.4); V = 162.0 mph
Region; Hurricane Prone
Importance factor ( table 6-1); I = 1.00
Exposure category (sect. 6.5.6); C
Wind directionality factor; Kd = 0.85
Topographic factor; Kzt = 1.00
Design procedure - analytical procedure (Method2)
Velocity pressure at mean roof height ‘h’(ASCE 7-05, cl. 6.5.10)
Case of loading system (table 6-3); Case = 1
Velocity pressure exposure coefficient; Kh = 0.85
Velocity pressure at mean roof height ‘h’; qh = 0.00256  Kh  Kzt  Kd  V2  I  1 psf / mph2 = 48.54 psf

Design wind pressure for MWFRS of low-rise enclosed and partially enclosed buildings (alternative procedure)
Velocity pressure at mean roof height ‘h’; qh = 48.54 psf
External and internal pressure coefficients (fig. 6-5)
Positive internal pressure coefficient; GCpi_pos = 0.18
Negative internal pressure coefficient; GCpi_neg = -0.18
Building surface 1
External pressure coeff. for surface 1 (fig. 6-10); GCpf_1 = 0.43
With positive GCpi; p1_S1 = qh  ((GCpf_1) - (GCpi_pos)) = 11.94 psf
With negative GCpi; p2_S1 = qh  ((GCpf_1) - (GCpi_neg)) = 29.42 psf

Building surface 2
External pressure coeff. for surface 2 (fig. 6-10); GCpf_2 = -0.69
With positive GCpi; p1_S2 = qh  ((GCpf_2) - (GCpi_pos)) = -42.23 psf
With negative GCpi; p2_S2 = qh  ((GCpf_2) - (GCpi_neg)) = -24.76 psf

Building surface 3
External pressure coeff. for surface 3 (fig. 6-10); GCpf_3 = -0.39
With positive GCpi; p1_S3 = qh  ((GCpf_3) - (GCpi_pos)) = -27.77 psf
With negative GCpi; p2_S3 = qh  ((GCpf_3) - (GCpi_neg)) = -10.29 psf

Building surface 4
External pressure coeff. for surface 4 (fig. 6-10); GCpf_4= -0.32
With positive GCpi; p1_S4 = qh  ((GCpf_4) - (GCpi_pos)) = -24.17 psf
With negative GCpi; p2_S4 = qh  ((GCpf_4) - (GCpi_neg)) = -6.70 psf

Building surface 5
External pressure coeff. for surface 5 (fig. 6-10); GCpf_5 = -0.45
With positive GCpi; p1_S5 = qh  ((GCpf_5) - (GCpi_pos)) = -30.58 psf
With negative GCpi; p2_S5 = qh  ((GCpf_5) - (GCpi_neg)) = -13.11 psf

Building surface 6
External pressure coeff. for surface 6 (fig. 6-10); GCpf_6 = -0.45
With positive GCpi; p1_S6 = qh  ((GCpf_6) - (GCpi_pos)) = -30.58 psf
With negative GCpi; p2_S6 = qh  ((GCpf_6) - (GCpi_neg)) = -13.11 psf

Building surface 1E
External pressure coeff. for surface 1E (fig. 6-10); GCpf_1E = 0.65
With positive GCpi; p1_S1E = qh  ((GCpf_1E) - (GCpi_pos)) = 22.72 psf
With negative GCpi; p2_S1E = qh  ((GCpf_1E) - (GCpi_neg)) = 40.19 psf

Building surface 2E
External pressure coeff. for surface 2E (fig. 6-10); GCpf_2E = -1.07
With positive GCpi; p1_S2E = qh  ((GCpf_2E) - (GCpi_pos)) = -60.68 psf
With negative GCpi; p2_S2E = qh  ((GCpf_2E) - (GCpi_neg)) = -43.20 psf
Building surface 3E
External pressure coeff. for surface 3E (fig. 6-10); GCpf_3E = -0.56
With positive GCpi; p1_S3E = qh  ((GCpf_3E) - (GCpi_pos)) = -36.02 psf
With negative GCpi; p2_S3E = qh  ((GCpf_3E) - (GCpi_neg)) = -18.54 psf

Building surface 4E
External pressure coeff. for surface 4E (fig. 6-10); GCpf_4E = -0.47
With positive GCpi; p1_S4E = qh  ((GCpf_4E) - (GCpi_pos)) = -31.65 psf
With negative GCpi; p2_S4E = qh  ((GCpf_4E) - (GCpi_neg)) = -14.17 psf
Note: - As per Section 6.1.4.1, the wind load to be used in the design of the MWFRS shall be not less than 10 psf multiplied by the area of the
building or structure projected onto a vertical plane normal to the wind direction.
 C C 6
6

3 2
4 1
2 3

3E 2E D
4E D 1E
 2E  3E
1 4
5 Reference 5
B Corner B
Direc 1E Direc 4E
Beingtion of MW Beingtion of MW
Desig F 2a
Desig F
ned RS A 2a ned RS A
Reference
Corner

Reference
Corner
C 5 C 5
2E 3E
1E 4E
3E 2E
2 3
1 4
3 2 Reference
4E 1E
D D Corner
2a 2a
 
4 1
6 6
B B
Direc Direc
Beingtion of MW Beingtion of MW
Desig F Desig F
ned RS A ned RS A

Basic Load Cases - Transverse Direction

 4E
Zone 2/3 Boundary C 4 Zone 2/3 Boundary C 4
3 3E 3
6 5
3 3
4E
2 3E 2
6 5 2E
2 D 2 D
5 6
 2E 
RS 1E RS
1 MWF 1 MWF
B 5 f
o ed B 6 f
o ed
ion ign ion ign
1E irect Des 2a
irect Des
D ing D ing
Be Reference Be
2a A Corner A
Reference
Corner

Reference
Corner 1E
Zone 2/3 Boundary C 1 Zone 2/3 Boundary C 1
2E 2 2
5 6
2 2
1E
3 3 2E Reference
5 3E
3 D
6 3 D Corner
6 5
  3E
4E RS RS
4 WF 4 WF
B 6 f M
o ed B 5 of M ed
2a ion ign ion ign
ect Des ect es
ir
D ing 4E Dir ing D
Be Be
A 2a A

Basic Load Cases - Longitudinal Direction

 4T
6
4
3T 3T
4T 6
3
2T
4E
4 3 2T 3E
6 2
3E 2 1T 5
4E
 2E  2E
B/2 1T
5 1 RS
1 5 L
M WF
B/2 of ed
L 1E B 1E ction esign
e
Direc
tio B Dir ing D
Being n of 2a Be
Desig MWFRS 2a
ned Reference Reference
Corner Corner

Torsional Load Case

Transverse Direction Longitudinal Direction