MULTIMEDIA RECEIVER

Wireless Apple CarPlay & Android Auto TM

USER MANUAL
AM9XAM10X

Android Auto, Google Play, Android, are registered trademarks of

Google, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Apple, Apple Car Play, Apple iPhone, Apple Music and Siri are registered
trademarks of Apple, Inc.

Android Auto and Apple CarPlay is not owned or controlled by any car manufacturer and are not
responsible for the privacy practices of third parties or the terms and conditions under which they offer
such products. We strongly encourage you to read the Android Auto or Apple CarPlay privacy policies
and terms and conditions to make sure they are acceptable to you.

INCLUSIONS: Head unit, GPS antenna, microphone, wiring harness,

audio-video lead & screws

DISCLAIMER: We recommend using an Authorised Dealer that offers an installation service

to install this product. Never cut or modify a harness as this could damage the head unit and
vehicle, as well as void the warranty of the product.
 FEATURES
• Large touchscreen LCD (1024 x 600) • Dual Rear USB: USB1: CP/AA/USB Media
• Works with Apple CarPlay (wireless or wired) USB2: USB Media
• Supports Android Auto (wireless or wired) • 8 Band graphic EQ
• Built-in Bluetooth (A2DP, AVRCP, HFP, PBAP) • 8 EQ Presets
• AM / FM Tuner with RDS & presets (18FM/12AM) • 40W x 4 Max built-in amplifier
• Reverse camera input/Second camera input (RCA-AHD) • Shallow 2-DIN chassis mounting design
• Rear A/V input • Steering wheel control ready
• 4V / 5CH RCA Preout • External microphone included
• MP3 / AAC / FLAC / MPEG 1,2,4 Media formats • Hema Maps Ready, Aerpro AMHXD3
• Subwoofer level control Integrated Navigation Module required
• Time alignment capabilities (sold separately) © Hema Maps 2022. Copyright

INTERFACE ICONS

Internal Microphone Home Volume Decrease

Reset Siri / GOOGLE Voice

ON / OFF (Hold) Volume Increase

MUTE (Tap)

2
 MAIN MENU
1 12 3 4 5 6
Home screen/back button
Date/Time
Current Source Music Info
Connected device (Page 4)
CarPlay or Android Auto mode*
Display On/Off
CarPlay Icon*
Android Auto Icon*
Radio Mode (Page 4)
Bluetooth Mode (Page 6)
USB Mode (Page 5)
7 8 9 10 11 12 AV In
13 Reverse Camera
14 Camera 2
15 Setup (Page 8)

* Icons will only be visible if a

compatible mobile device is
connected. For more information
refer to page 13-14.

12 13 14 15
NOTE: The headunit screen will automatically return to its previous source after a
period of time, when in the main menu or settings.
CAM R (Reverse camera)
Pressing this icon will trigger and show the reverse camera on the screen.
NOTE: The reverse camera 12V wire has to be connected to the camera 12V wire on
the headunit for this function to work. Refer to page 19-20 for more information.
CAM 2 (Second camera)
Pressing this icon will trigger and show the second camera on the screen.
NOTE: The second cameras 12V wire has to be connected to the CAM2 power wire
on the headunit for this function to work. Refer to page 19-20 for more information.
3
 RADIO MODE
To enter Radio Mode, touch “Radio” icon on the Main Menu

1 2 3 Seek down
Radio frequency
Seek up
AF and TA settings
FM Band button
AM Band button
Auto Store button
EQ Mode button
Keypad button
Preset station list
4 5 6 7 8 9 10

Auto Tuning
Press the seek icon ( or ) on the TFT Monitor screen to increase / decrease the
tuning frequency one step at 0.05MHz increments for FM and 9KHz increments for AM.
Press and hold the seek icon ( or ) on the TFT Monitor screen to seek the available
channel by increasing or decreasing the tuning frequency.

FM and AM
Touch the “FM1” or “AM1” on the screen to change among the following bands: FM1,
FM2, FM3 or AM1 and AM2.

Preset Stations
Six(6) stored stations for the current band appear on the screen, touch the preset directly
for use or press the number buttons located on the head unit.

Storing a Station
1. Select a station. (Example: FM1 103.6MHz)
2. Touch and Hold the desired preset number for 3 seconds to store the Radio station.

Recalling a Stored Station

1. Select a Band (If needed).
2. Touch the preset button on which the corresponding radio station is stored or press the
number button on the Radio panel.

4
 MEDIA PLAYING MODE
This operation allows you to play various compatible formats.

9 8 7

1 2 3 4 5 6
Touch the icon to return to previous track or press and hold the icon to fast rewind
Touch the / icon to play or pause the track
Touch the icon to go to next track or press and hold the icon to fast forward
Touch the end of the progress bar line and drag it left or right to the desired track time
Touch the icon to repeat a folder or track
Touch the icon to activate / deactivate the track in random mode
Touch the icon to show the track list
Touch the icon to display the equalizer settings
Playing track ID3 info (needs media file support)
Touch to go back to previous folder
Touch for music list
10
Touch for video list
Touch for keypad for quick search
File List
11

12

13

14

5
 BLUETOOTH MODE
NOTE: Bluetooth mode can only be accessed when not connected to Android Auto
or Apple CarPlay. Press icon to go to connected devices screen.

• When the phone connects to the unit successfully, all of the phone’s Bluetooth enabled
options will be active.
• This unit can be paired with 5 mobile phones, but only one can be active at a time.
• The unit Bluetooth name is AERPRO

1 2 3 4 5 6
5
Touch the icon to enter pairing mode
Touch the icon to keypad
Touch to open the phone book
Touch to open the phone interface
Touch the icon to enter Bluetooth music
Touch the icon to enter Bluetooth
settings
Touch to go to connected device screen
Touch “Refresh” to search for bluetooth
devices
Auto connect to your previously paired
bluetooth device
Auto answer for incoming calls
Sync Call logs and Contacts
Microphone gain volume control
7 8

9
8
> Some mobile phones may not
10 support the download function.
11 > Depending on the music player
you are using, streaming may not
be supported.

12
8

6
 CONNECTED DEVICES SCREEN
Touch the icon to access the connected devices screen

This screen displays paired devices and allows the user to turn Android Auto/Apple CarPlay
or other bluetooth features on or off. (If applicable to the device)

2 3 4 5

6
1

7
Paired devices
Apple CarPlay activate/deactivate
Android Auto activate/deactivate
Bluetooth calling activate/deactivate
Bluetooth music activate/deactivate
Remove paired device
Add a new compatible device
NOTE: Only one device can be active at any given time

Bluetooth Calling and Bluetooth Music is deactivated on this screen when using
Apple Car Play however Bluetooth Calling and Music work through Apple Car Play
as intended.

Android Auto requires Bluetooth Calling and Bluetooth Music to be connected and
activated for Android Auto to function correctly.

7
 SETUP MENU
Setup menu allows you to change the settings within unit, General, Display, Audio and
Others
General
• Touch “General” on the Setup Menu display for general settings

8
 SETUP MENU

Setting Options Functions

Date Day / Month / Year Select to adjust calendar date
Time 12 Hour / 24 Hour
Minutes Select to adjust time
Beep Format
Time On 12
/ Off
Hour / 24 Hour Choose clock mode 12H/24H
Beep On / Off Activation / Deactivation of touch screen beep

Reverse Line On / Off Adds reversing lines to the reverse camera

Car Life
Rear Cam Horz Flip On / Off Flips rear camera horizontally

Rear Cam Vert Flip On / Off Flips rear camera vertically

Camera2 Horz Flip On / Off Flips Second camera horizontally

Camera2 Vert Flip On / Off Flips Second camera vertically
Internal Mic On / Off On uses internal Mic / Off uses external Mic

Microphone Gain 0 to 12 Adjust microphone sensitivity

Radio Region 12 Hour / 24 Hour Select your radio region
Right hand Drive On / Off Changes indicator bar to left or right of display

9
 SETUP MENU
Audio

• Touch “Audio” on the Setup Menu

display for audio adjustment settings

Setting Options Functions

Equalizer - Balance and EQ setting
Time Alignment Default / Presets / Reset Speaker delay
Filter
Subwoofer - / Off
On Sub filter settings
Loudness On / Off Sound boost
Subwoofer Gain On
0 to/ -10
Off Bass
Heavyswitch
bass increases and decreases
Subwoofer Gain 0 to 10 Heavy bass increases and decreases
Reversing volume On / Off / Half Controls music volume when reversing

10
 SETUP MENU
Display

• Touch “Display” on the Setup Menu display, then select a feature you want to adjust.
* Requires an illumination wire to be present in the vehicle (Usually orange wire in ISO harness needs
to have a connection)

Setting Options Functions

Brightness 0 to 20 Touch the desired screen brightness
Dimmer Mode Auto / Day / Night Touch the desired screen preset
(Auto changes brightness when headlights on*)
Display Contrast 0 to 24 Touch to adjust desired screen contrast
Display Saturation 0 to 24 Touch to adjust desired screen saturation
Reverse Camera Contrast 0 to 24 Touch to adjust desired camera contrast
Version Camera Saturation- 0 to 24
Reverse Software
Touch toversion
adjust desired
of the radio.
camera saturation
Camera2 Contrast 0 to 24 Touch to adjust desired camera2 contrast
Version Saturation
Camera2 - 0 to 24 Software
Touch toversion
adjust desired
of the radio.
camera2 saturation

11
 SETUP MENU
Others

• Touch “Others” on the Setup Menu display, then select for information and factory reset.
* The Steering Wheel Controls are pre-programmed, and is not required to be manually adjusted unless the
user wants to customize these functions.

Setting Options Functions

Factory Default No / Yes Touch to return to the factory setting
System Version - Software version of the radio
Steering Wheel Controls - Touch to manually adjust SWC functions*
Version
Open Source License - Software license
Displays versioninformation
of the radio.

REVERSE CAMERA DISPLAY

• When the vehicle is put into reverse, you can tap the screen to display the camera
switching icon. Tapping on this icon will switch the view to the second camera.
NOTE: The reverse trigger wire must be connected in order to display the reverse
camera when the vehicle is in reverse.
The second camera must be connected in order to use the camera switching
function (refer to page 19-20).

12
 Wired & Wireless CarPlay Operation
NOTE: We recommended that the wired connection method be used for new devices.
The park brake needs to be connected for Apple CarPlay to function.

Wired connection

1. Turn on Bluetooth and WiFi on your compatible device

2. Connect an Apple CarPlay compatible device to this unit via USB1 (CP/AA/USB Media)
3. A pair message and a pairing request code may appear on your compatible device and
head unit. Click allow to accept
4. An ‘Allow CarPlay with Aerpro while phone is locked’ message may appear on your
device. Click allow to accept
5. Click to enable wireless CarPlay or use USB only option
6. Once connection is enabled for wireless CarPlay, connection via the USB connection is
no longer required and wireless connection will be automatic
7. The Apple CarPlay automatically displays on screen, if not press the home button,
press icon and press the Apple CarPlay icon

Wireless connection
1. Before using Apple CarPlay wirelessly, turn on the Bluetooth and WiFi function on the
compatible device
2. Navigate to the Bluetooth settings on your compatible device and select Aerpro for
pairing
3. A pair message and a pairing request code may appear on your compatible device and
head unit. Click allow to accept
4. Apple CarPlay automatically displays on screen, if not press the home button,
press icon and press the Apple CarPlay icon

13
 Wired & Wireless Android Auto™ Operation
NOTE: We recommended that the wired connection method be used for new devices.
The park brake needs to be connected for Android Auto to function.

Wired connection

1. Connect an Android Auto™ compatible device to this unit via USB1 (CP/AA/USB Media)
2. Follow on-screen instructions that may appear on your device and head unit
3. Press the Android Auto icon to initiate a connection. The Android Auto home screen
appears
4. Once an initial wired connection has been made, connection via the USB connection is
no longer required and wireless connection will be automatic.

Wireless connection

1. Before using Android Auto wirelessly, turn on the Bluetooth and WiFi function on the
compatible device.
2. Navigate to the Bluetooth settings on your compatible device and select Aerpro for
pairing
3. A pair message and a pairing request code may appear on your compatible device and
head unit. Click allow to accept
4. Android Auto automatically displays on screen, if not press the home button,
press icon and press the Android Auto icon

5. Follow on-screen instructions that may appear on your device and head unit

14
 HOW TO USE CARPLAY ®
Requirements
• Lightning Data Cable
• iPhone 5 or later
• iPhone with iOS 7.1 or later
• Data Plan for in app content
• Siri activated

Phone Setup (Before you begin):

1. Apple CarPlay ® features may operate differently than on your Apple iPhone ®
2. Message and data charges may apply when using Apple CarPlay. Please check with
your carrier
3. Apple CarPlay ® relies on the performance of your phone. If you experience
performance issues:
Close all apps and then restart them again
Disconnect and then reconnect your phone using the Apple Lightning cable that was
provided with your phone is recommended.
4. When Apple CarPlay ® is active, your voice recognition system is disabled and you will
be using Siri ® to make your requests
5. On your phone, go to Settings > General > Siri and ensure Siri is turned ON

NOTE: For details about Apple CarPlay,

refer to the manual supplied with your
iPhone, or visit the website of Apple
CarPlay.

15
 USING SIRI ®
Apple CarPlay uses Siri to perform many
actions like sending messages, placing calls,
and looking up/setting POI/Destinations.
A Siri session can be initiated on any screen
by:
• Touching and holding the Home icon on
the CarPlay screen or
• Pressing the Voice button on the panel or
the Steering Wheel, then say any of the
following commands:
Voice button º “Text <Name> Call you later” to send a
text message.
º “Read text messages” to read available
NOTE: text message.
Ensure Siri feature is set to ON in your
phone (Go to Settings> General > Siri). º “Call <Name>” to make a phone call.
º “Find <POI/Destination>” to locate a
POI/Destination.

USING GOOGLE VOICE ®

Android Auto uses Google voice actions for many functions. A Google voice
action session can be initiated on any screen by:

• Touching the Microphone icon on any

screen.
• Pressing the Voice Recognition Button
on panel or Steering Wheel.

Voice button

Making a Call
Touch the Phone icon to access recent call list. Or you can initiate a voice action and
then say “Call <Name>” or “Dial <number>” to make phone calls from any screen.

16
 HOW TO USE ANDROID AUTO ®
Requirements
• USB Data Cable
• Compatible Android® phone with
OS Android 6.0 or higher
• Data Plan for in app content
• Wireless Android Auto requires
5GHz(802.11/ac) Wi-Fi support
(refer to page 18 of this manual)
• Android Auto App download from the
Google Play® store if not on your device
• Android Auto must be available in your
country or region
Phone Setup (Before you begin):
1. Android Auto ® features may operate differently than on your Android ® phone.
2. Message and data charges may apply when using Android Auto. Please check with
your carrier
3. Android Auto relies on the performance of your phone. If you experience performance
issues:
Close all apps and then restart them again
Disconnect and then reconnect your phone using the USB cable that was provided
with your phone is recommended
When Android Auto is active, your in-vehicle voice recognition system is disabled and
you will be using Google® voice actions to make your requests

Overview
• Android Auto organizes recent actions
and information into simple icons on
the Android Auto Home screen.
Touching an actionable icon will take
you to the app.

NOTE: For details about Android Auto, refer to the manual supplied with your
Android phone, or visit the website of Android Auto.

17
 ATTACHING THE HEADUNIT TO THE FACIA
Before installation use the provided head unit screws and attach the head unit to the
mounting positions on the facia. Also retain factory plastic mounting clips and any factory
additional screws.

Facias are vehicle specific and their installation may differ, and may have additional
supplied brackets or parts and fittings. Refer to the QR code on the product box or visit our
website and search for your vehicle/product for vehicle specific facia installation procedures
if applicable.

We recommend the use of hand tightening tools only as over-tightening may damage the
facia plastics.

18
 CAMERA 2 NOTES
ATTENTION: If you would like to add a second camera to your vehicle, you must
connect both the reverse camera and the second camera to the Audio Visual Harness
as well as wiring the Reverse Trigger Wire otherwise dual camera functionality will not
work correctly.

To correctly utilise dual cameras for this head unit, connections to the Audio Visual
Harness are as follows:
The Reverse Cameras 12V+ connected to R Camera 12V+ (Red)
The Reverse Camera RCA connected to R Camera In RCA
The Second Camera 12V+ connected to Camera 2 12V+ (Yellow)
The Second Camera RCA connected to CAM2 RCA
Reverse Camera Ground (Black) to chassis
Reverse Trigger Wire connected correctly

NOTE: This dual camera configuration may not work for factory fitted OEM
reverse cameras and may need to be re-wired directly to the headunit for it to
work correctly. We recommended seeing an authorised Aerpro Dealer that offers
an installation service if you would like to install a second camera input for your
vehicle.

Bear in mind that this issue only applies if you would like to add a second camera
into your vehicle, your factory fitted reverse camera will work as intended without
adjustment if you are only going to use the single reverse camera input.
The CAM R & CAM 2 icons in the home screen will show the same camera input
when used.

19
 GENERAL WIRING DIAGRAM
Camera 2 (CAM2) Camera 2 (12V)
Video in Video Out
R Camera in Line Out-Front Right
Camera Ground Line Out-Front Left
Factory Camera R Camera 12V+ Line Out-Rear Right
Retention harness AV in Right Line Out-Rear Left
AV in Left Line Out-Sub Woofer

GPS assist antenna

Mic input

USB1: CP/AA/USB Media

USB2: USB Media

Head unit Antenna input

SWC Plug
Power control (Blue/White trace)

CH Module

Speed Pulse (Pink) not required

Control Module Harness

Reverse (Purple)

Park brake (Green)

Harness
Vehicle

NOTE: This diagram shows a basic wiring configuration.

For your safety be sure to connect the park brake wire.
Some vehicles will not have a park brake output from the vehicle.
20
 SPECIFICATIONS
Display LCD Size 10.1" (AM10X) / 9" (AM9X)
Resolution 1024*600
Touch Screen Capacitive G+G
System Specification OS System/CPU Linux 3.4.5 / SPHE8368U
RAM / Flash Memory 128MB / 256MB
DIN Size 2.0 DIN 2DIN short body
Power Output Rated Power (4 Ohm @ 14.4 V, 1 kHz, THD 10 %) 4CH x 25W
MAX Power (4 Ohm) 4CH x 40W
Media Playback MP3 / MP4 / AAC / FLAC / Xvid Yes
Device Ports (Rear) USB1: 5V / 1.5A CP/AA/USB Media
USB2: 5V / 1.5A USB Media
USB MAX Capability FAT32_32GB
Aux Inputs / Outputs Rear A/V Input (RCA Type - 3pcs) Yes
Composite Video Output Yes
Reverse Camera Inputs Yes (720P AHD Compatible)
Second Camera Inputs Yes (720P AHD Compatible)
Mirror Link CarPlay & Android Auto Wireless and Wired
Bluetooth Bluetooth Built-In Yes (A2DP, AVRCP, HFP, PBAP)
Bluetooth Version V4.2+EDR
Microphone Built-in & External Microphone
ID3 Tag/Information (Artist, Album, Song) Yes
HFP Profile (1.2, 1.4 or HD Voice 1.6) HFP 1.6
Tuners AM/FM (# of Presets) AM 12 (6X2) / FM 18 (6X3)
FM Frequency Span (MHz) 87.5-108.0MHz (0.05MHz Step)
AM Frequency Span (KHz) 531-1629KHz (9KHz Step)
RDS Yes
FM Antenna Connector Impedance 50 Ohm
FM Tuner Connector Motorola
RCA Preamp Outputs 2-Pair RCA Preamp Output Yes
Subwoofer RCA Output/Level Control Yes
Preamp Voltage (1.2,2,4,5,6) 4V p-p
Tone Control 8 Band (50/200/400/800/1K/3K/7K/15K)
Loudness Yes
LPF - Frequencies (Sub) Yes
8 Preset EQs Yes
Other Features Steering Wheel Control Yes, with Aerpro SWC Adaptor
Accessories Power Harness Yes with ISO / 3.5mm jack
AV-In Cable (RCA with Audio L/R, Video In) Yes
Reverse Camera Input Yes
4.1CH Audio Out Cable Yes
External Microphone Included

21
 FAQ/TROUBLESHOOTING
My Android phone will not connect wirelessly to the head unit
• Your mobile phone must be a compatible Android phone with an active data plan, 5 GHz
Wi-Fi support (802.11/ac), and the latest version of the Android Auto app.
• Compatible Android phones include:
° Any phone with Android 11.0 or above
° A Google or Samsung phone with Android 10.0 or above
° A Samsung Galaxy S8, Galaxy S8+, or Note 8, with Android 9.0 or above
• If your phone does not meet the compatible Android phone list but has 5 Ghz Wi-Fi support,
you can follow these steps. (Note: We cannot guarantee this will provide a reliable Wireless
Android Auto experience and is used as a work around for older phones)
° Go to the settings of the Android Auto app
° Scroll down to the bottom where is states version number
° Tap this several times until a pop up message appears asking to enable Developer
options. Accept this message
° Tap on the 3 dots in the top right corner and choose Developer Settings
° Scroll down until you can find ‘Add wireless projection to settings’ and enable this. (Make
sure that it is also ticked in the settings of Android Auto under ‘Wireless projection’ section.)
° Try the connection process again

If you are still having issues connecting your Android phone wirelessly to the head
unit, try the steps below
• Navigate to your Android Settings
• Scroll and tap on the ‘Apps’ Settings
• Tap on ‘Android Auto’
• Scroll to ‘Storage’ & tap on it
• Clear Cache first on the right side
• Then ‘Clear Data’
• Press ‘Delete’ on the pop-up message
• Turn off Wi-Fi
• Navigate to your Bluetooth Settings
• Tap the Cog on the previously paired Aerpro head units Bluetooth. If you have not previously
paired with the head unit, you can skip to re-pairing your phone with the Aerpro head unit.
• Tap Unpair.
• Now you can begin pairing with your Aerpro Headunit and follow the steps from the pairing
procedure in the manual.

If you are still having issues, try restarting your phone and going through this process again.

You can watch a visual process of these steps by visiting the product page on the Aerpro
website, or click on the URL link below:
https://youtu.be/DU7cfw4hfNI
22
 FAQ/TROUBLESHOOTING
My Mobile phone will not connect to the head unit
• If you are having trouble connecting your phone to the head unit, try restarting your phone
and try again.
• It is also recommended to do a factory reset on the head unit as this will solve most of the
connection issues between your phone and your head unit.
• If you are having issues with connecting Android Auto or Apple CarPlay over a USB
connection, try using another high quality /shorter length cable. Using low quality cables and
longer lengths may cause issues such as drop outs and or connection issues.
• Make sure your phone is up to date with the latest software updates.

Do I have to connect the GPS module for Android Auto/Apple CarPlay to work?
• It is highly recommended to connect the GPS module to the head unit and place it where it
has a clear line of sight to the sky as it will assist the GPS tracking for maps when using
Android Auto or Apple CarPlay.
• If you do not use the GPS module then the GPS tracking will rely purely on your phone's
tracking performance which may be spotty depending on the location of the phone in the
vehicle.

Red Blinking Power Light on the Head Unit

• This can mean the head unit doesn't have enough power to power on the unit or there is a
wiring issue. Please refer to the aerpro website for specific instructions related to your
vehicle.

Android Auto/Apple CarPlay won’t work unless Park Brake is active but the kit didn’t
have a Park Brake connection.
• If the harness that came with your kit didn’t have a park brake connector then you must
manually make a connection between your hand brake and the harness on the headunit for
these functions to work.

Issue with microphone on handsfree calls

• If an external microphone is connected, make sure the internal microphone setting is turned
off. You can also adjust the gain of the microphone in the settings.
• Make sure to use the external microphone provided with this product as other external
microphones may be incompatible.
 FAQ/TROUBLESHOOTING
Android Auto/Apple CarPlay won’t work unless Park Brake is active but the kit didn’t
have a Park Brake connection.
• If the harness that came with your kit didn’t have a park brake connector then you must
manually make a connection between your hand brake and the harness on the headunit for
these functions to work.

Issue with microphone on handsfree calls

• If an external microphone is connected, make sure the internal microphone setting is turned
off. You can also adjust the gain of the microphone in the settings.
• Make sure to use the external microphone provided with this product as other external
microphones may be incompatible.

SAFETY INFORMATION & WARNINGS

Do not try opening the shell or try to repair the product by yourself.
If the product or it’s accessories have any problems and is still under warranty, then take it
back to the place of purchase with the original purchase receipt.
If out of warranty then contact the authorised repair agent, Aerpro Support.
Do not use a chemical substance, cleaning solvent or cleaner to clean the product, please
use a moist soft cloth if you would like to clean the product.
Do not use the product under conditions where dust is present.
Please pay attention to cleaning the display surface, use a moist soft cloth to clean the
display.

TECHNICAL ASSISTANCE
Please retain this user guide for future reference.

If you would like to download a digital copy of this manual, or other Aerpro manuals/software,
please visit the Aerpro.com website and search for information on your model.
This quick start guide is considered correct at time of printing but is subject to change.
For latest quick start guide, manuals, videos and updates refer to the website.

Copyright © 2022 by TDJ Australia

All rights reserved. No part of this publication may be reproduced, distributed, or transmitted
in any form or by any means, including photocopying, recording, copying or other electronic or
mechanical methods, without the prior written permission of the author.

TEL: 03 – 8587 8898 FAX: 03 – 8587 8866

Mon-Fri 9am – 5pm AEST

aerpro.com