Ms.

JANETTE PAZ, Materials Engineer/Metallurgist

Venezuela, Mobile : 0058-424-6363772

E-mail: [email protected]:chiquin71
EXTRACT

37 years´ experience with increasing responsibility and successful results in Quality Control and Quality
Assurance for EPC Projects in Procurement and Construction phases for oil and gas projects and industries in
Venezuela and United Kingdom.
I am also performed the position as Fixed Equipment Reliability Leader for a Fertilizer Complex (Ammonia and
Urea Plants) in Venezuela
Ability to manage staffs, interface with project teams, suppliers, engineering, subcontractors, inspection agencies
around the world to ensure comply with the technical requirements of the projects.
Exceptional leadership, decision-making, interpersonal communication, ability working under pressure and with
multi disciplinary and multicultural teams.
Experienced in working with diverse equipments and materials across multiple disciplines such as: Reactors,
vessels, heat exchangers, pumps, compressors, structural steels, mechanical and electrical bulk materials,
electrical panels, MCC, control valves, measuring instruments, painting, insulation works.
Managing international codes such as: ASME Section V, Section VIII Division 1, ASME Section IX, API 5L,
API 1104, API 598, API 650, ISO 9001-2008, ASTM various, ANSI various ANSI B31.3,ANSI B31.4, AWS D
1.1, TEMA, NEMA, COVENIN, Microsoft Office Word ,Excel, Power Point,
EDUCATION
Materials Engineer with honor in Metallurgy, University “Simón Bolìvar”, Venezuela. May 1980
SCHOLARSHIPS GRANTED
“Gran Mariscal de Ayacucho” Fundación since Sept. 1975 to May 1980, Venezuela
WORK ACCREDITATION:
American Welding Association (AWS) CAWI Number: 01120464
PROFESSIONAL MEMBERSHIPS:
Colegio de Ingenieros de Venezuela N ° C. I. V. 28.389
AMERICAN WELDING SOCIETY (AWS) Member N° 513255
LANGUAGES
Spanish: Fluent English Good.
EXPERIENCE AND ACCOMPLISHMENTS

2015- to December 2017. QA/QC Coordinator, ELECNOR.

For the Construction Management of one Cycles Combined Thermo electrical Plant with two (2) Siemens Gas
Turbines into PDVSA off Shore Complex CIGMA in Guiria, Venezuela to generate 450 MW have been covering
with Siemens´ TFA Inspections of the followings: Generator and Turbine enclosures, Lube Oil Package, Rotor
Air Cooler, Lube Oil Cooler, Inlet Duct and Silencers, Exhaust Transition and Stacks, Exhaust Diverter Damper
Skid, Piping Installation, Welder qualifications. QA/QC activities for the site erection of storage tanks accoding
API 650 Code.
2011-2014. Project QA/QC Leader, PDVSA- Venezuela.
Performed successfully for the construction and the procurement of 224 km length pipeline for oil products
transportation according the Code API 1104+ANSI B31.4 and ISO 9001-2008 duties as follows : Approved
Quality Plans and Inspection and Test Plans of 5 construction sub-contractors, approved welding procedures ,
coordinated welder qualifications. Shear pre inspection meetings, Follow non-conformance resolution.
Implement quality audits. Selection and supervise inspection engineers.

2010- 2011. Site QA/ QC Leader. ASINCRO (Consulting engineering company) Venezuela. Client´s
representative of the EPC project of a Combined Cycle Power Plant with: 2x2 gas turbines, 2x2 heat recovery
steam generators and 2 steam turbines. Capacity: 2x500 MW. Client: PDVSA.
The main contractor was FERROSTAAL. Covering civil, mechanical and electrical works had the following
accomplishments:
 Ms. JANETTE PAZ, Materials Engineer/Metallurgist

Review quality control procedures, Quality Plans, Inspection and test Plans for any materials and
equipment installations.
Monitored inspections implementing, non-conformance resolutions. Review quality records. Attend project
meetings for quality subjects.

2006-2009. Senior Inspecting Engineer, Foster Wheeler Ltd in Reading United Kingdom. Performed
successfully the positions as follows:
Corporate Inspection Coordinator for the Corporate Procurement Department evaluating and arranging inspection
visits around the world for many EPC projects of diverse materials and equipment across multiple disciplines.
Project Inspection Coordinator assigned for more than three years into the following EPC Projects:
1. Client: INEOS, EPC K G Flex Project. New Ethylene Plant in Grangemouth, Scotland &
2. Client: Emirates National Oil Company Processing Company (EPCL) EPC Project: The Naphtha Hydrotreater
Reformer Project for the major upgrade of EPCL´s Jebel Ali gas condensate refinery in Dubai, UAE. .The upgrade of
the existing 120.000 barrels per stream day(BPSD)gas condensate refinery included a 70.000 BPSD liquefied
petroleum gas/naphtha hydrotreater a 36.000 BPSD crude catalytic reformer and ancillary processing units, plus
associated new or revamped utilities and offsite facilities, Had duties and accomplishments as follows:
- Develops and implements the Project Source Inspection Plans that ensure materials and equipment in manufacture
meet the level of quality and design criteria defined in the purchase orders
- Reviewed PO requisitions , purchase orders for completeness of inspection, testing and documentation requirements
- Reviewed requirements designated by Engineering for their participation regarding witness and hold point activities
on the Inspection and Test Plans of suppliers.
- Coordinated inspection activities with Engineering, Suppliers and liaising with the Client included Pre Inspection
Meeting.
- Coordinated with suppliers inspection visits and with Inspection agencies throughout the world.
- Ensures timely receipt of inspection reports in the office, and performs the initial review.
- Actions discrepancies and NCR´s arising and ensuring they are reported to the appropriate persons into the
engineering teams.
- Reviewed inspection reports for confirmation of technical compliance and distribute into the project teams. Record
keeping
- Coordinated Non Conformances resolution. Reviewed inspection and test plans of the suppliers to mark the
inspection points according the Material requisitions and for specific quality requirements.
1998- 2005 Fixed Equipment Reliability Leader, FertiNitro. This is Venezuela´s largest fertilizer company.
FertiNitro is one of the world´s main producers of nitrogen fertilizer, with daily production capacity of 3.600 tons
of ammonia and 4.400 tons of urea. The accomplishments were:
- Managing 4 staff Inspectors & any subcontracting inspection companies
- Coordinated with external companies for the Failure Analysis of Piping and Process Equipment.
- Delivered Welding Procedure Specifications to repair Pressure Vessels, Steam Boiler & Piping.
- Delivered Inspection and test Plans for vessels and piping & the scope of work for Shutdown
/turnaround and plants in service to ensure continuing availability and equipment integrity and reliability
- Successfully coordinated, implemented and monitored inspection input into plant equipment and
Process piping maintenance plans using ULTRAPIPE Software
- Quality Control Supervisor: during the construction of FertiNitro covering civil work,
Fixed equipment installations, painting, welding, structural steel erection and insulation works.

1998. Site Quality Control Coordinator, Z & P Construction Company. Venezuela

EPC Project of a Cryogenic Gas Plant to PDVSA

1997. Quality Control Manager, CONVECA, Construction Contractor.

Delivered the Quality Manual according the ISO-9002, coordinating the procedures preparation to departments
such as: Purchasing, Financial, Construction. Delivered Inspection and Tests Plans to Oil and Gas EPC projects,
covered civil works, mechanical installation, electrical and instrument installation. Delivered inspection
procedures & welding procedures according ASME IX Code.
1985-1997 TECNOCONSULT INGENIEROS. Venezuela. Successfully performed QA/QC positions into
procurement and construction phases for oil and gas projects as follows:
1994- 1997 Quality Control Engineer, Fluor Daniels – TECNOCONSULT Consortium, for EPC Project
for a gas Pipeline interconnection with two refineries and 2 HDS Units Expansion into AMUAY Refinery,
Venezuela. Client: PDVSA
Ms. JANETTE PAZ, Materials Engineer/Metallurgist

1992- 1994. Inspection and Expediting Coordinator, SNAMPROGETTI – TECNOCONSULT

Consortium, for the EPC Project, Methanol Plant, Client: SUPERMETANOL
Coordinated the local procurement covering the engineering and fabrication of pressure vessels under the ASME
Code Section VIII Div. 1, structural steels for various processing facilities, mechanical and electrical bulk
materials,
1990 – 1992 Inspection Coordinator, Client: PDVSA.
Actuating as PDVSA´s representative performing resident inspection of fabrication and coating 100 km 20” gas
pipeline EPC project “New Gas Pipeline to the AMUAY Refinery”. Supervised inspection engineers into three
journey
1988- 1990 Inspecting Engineer SNAMPROGETTI–TECNOCONSULT Consortium. EPC project for the
Petrochemical M.T.B.E. Complex Client: SUPEROCTANOS, Venezuela) for the local project procurement team
inspecting: structural steels, mechanical and electrical bulk material.
Painting and Insulation Specialist for the Construction phase and site erection inspecting of API 650 storage tanks
1987 Mechanical Construction Supervisor Client: AGA EPC project of a Air Gases Plant (Nitrogen
and Oxygen Liquid Plant) for the Construction of the Air Gases Plant
1986-1985 Quality Control Coordinator Client: PDVSA, NURGAS Project.
I performed successfully resident inspection of fabrication 30 inch pipeline according API-5L and PDVSA
specification.
Inspected the pre- fabrication of Floating Roof Oil Crude Tank and others supported cone roof tanks according
API 650 Code.
1984. Quality Control Manager, MEGO AFEK DE VENEZUELA, Measuring Instruments manufacture.
Delivered the Quality Control Manual and Mego Afek was awarded with the accreditation from PDVSA as
measuring instruments supplier
1983. Quality Control Engineer, TECNOCONSULT INGENIEROS, Engineering Company, Venezuela.
Client: ENELVEN. The EPC Project of the expansion of one thermoelectric plant with 3 units of 163 MW EA.
Inspected the fabrication of electrical and mechanical bulk materials, Electrical Panels, Storage Tanks according API
650 Code, Medium structural steels for process facilities.

1980-1982 Corrosion Engineer, PEQUIVEN. National Petrochemical Company in Venezuela.

Accomplishments:
- Delivered the Manual for Anticorrosive painting application for the Petrochemical Complex including Plants as
such: Ethylene, Chlorine-Soda Ash, Urea, Ammonia and Water Treatment Plants.
- Evaluated paintings of different commercial marks performing laboratory tests and locating paint coupons into high
corrosive environments

TRAININGS
 Guide for Inspection and Maintenance of High Pressure Equipments for Urea Plants
 Implementation and Development of ISO 9001 Code.
 Quality Systems
 Welding qualification procedures and welder qualification in accordance with the ASME IX Code.
 Material failure analysis.
 Failure detection with the use of non-destructive tests.
 Ultrasonic level II,
 Industrial Radiography Level II.
 Welding Inspections
 ASME Code Section VIII Div. 1,
 AWS Code D 1.1 Edition 2004
 Corrosion Engineer
 Monitoring Corrosion into Refinery using Ultrapipe software