Moplen HP480S
Polypropylene Homopolymer
LyondellBasell Industries
Product Description
Moplen HP480S is a polypropylene hompolymer manufactured using the Spheripol process. Typical applications include CD and DVD Casings,
houseware, containers, and other thin wall injection moulded articles.
General
Material Status • Commercial: Active
Availability • Africa & Middle East • Asia Pacific
• Good Impact Resistance • Good Stiffness
Features
• Good Processability • Homopolymer
• Containers • Media Packaging
Uses
• Household Goods • Thin-walled Parts
Forms • Pellets
Processing Method • Injection Molding
Physical Nominal Value Unit Test Method
Specific Gravity 0.900 g/cm³ ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) 40 g/10 min ASTM D1238
Mechanical Nominal Value Unit Test Method
Tensile Strength (Yield) 34.3 MPa ASTM D638
Tensile Elongation (Yield) 10 % ASTM D638
Flexural Modulus 1470 MPa ASTM D790
Impact Nominal Value Unit Test Method
Notched Izod Impact (23°C) 20 J/m ASTM D256
Thermal Nominal Value Unit Test Method
Deflection Temperature Under Load ASTM D648
0.45 MPa, Unannealed 110 °C
Notes
1
Typical properties: these are not to be construed as specifications.
1 of 1
Copyright © 2011 - IDES - The Plastics Web ® | 800-788-4668 or 307-742-9227 | www.ides.com. Revision History
Document Created: Wednesday, October 26, 2011
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of Added to Prospector: July, 2006
this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with Last Updated: 1/7/2008
the material supplier.
