Cam 2k User Manual
Cam 2k User Manual
Ultra 2K
7 Ethernet port
8 Reset Button
9 Power port
Smart Cam 360° Ultra 2K
Qubo Smart Cam 360° Ultra 2K can
remotely connect you with your home
through Live Remote Monitoring &
Two Way Communication.
With smart features like
Person Detection, Motion
Tracking and Motion
Detection, it gives you Full
Colour in Low Light
(Night Vision). Qubo Smart
Cam 360° Ultra 2K can be
expanded upto 1TB of
storage with an SD card.
1. Smart Cam 360° Ultra 2K
2. Power Adapter
3. Cable
6. Location Label
7. Warranty Card
Power Adapter
1 TB
Step 1
Plug in your Qubo Smart Cam 360° Ultra 2K:
Connect the power cable that comes with Camera
to a power source via the power adaptor.
Step 2
Download the Qubo App from Google Play or
Apple App Store by scanning the QR Code below.
Step 3
Create an account on the QUBO App &
follow the instructions to get started.
Choose a
Location
Avoid direct sunlight
& rain
The camera is
designed to operate
between - 0° to
45°C. If it gets hotter
or colder, image
quality may
be affected.
Mount Your
Qubo Smart Cam 360 Ultra 2K
Put/Place the
Camera onto the
screws and aim it
wherever you like.
Use the video stream
in the QUBO app to
fine-tune your
camera’s position.
Make sure that the power supply to the
Smart Cam 360° Ultra 2K is already
disconnected. Adjust the camera lens
upward until the MicroSD slot is visible, insert
the MicroSD card into the slot (the side
with contact points must
be facing down).
Note: Please use genuine
MicroSD card manufactured
by a qualified supplier and
make sure that the storage
capacity must be 1 TB
or less.
Thank you for selecting the Smart Cam 360° Ultra 2K by Hero
Electronix.