Your specialist in innovating humidity & temperature sensors
HR202L with case HR202L without case
Resistive humidity sensor, Model: HR202L
HR202L is a new kind of humidity-sensitive resistor made from organic macromolecule materials, it can be used
in occasions like: hospitals, storage, workshop, textile industry, tobaccos, pharmaceutical field, meteorology, etc.
1. Features:
Excellent linearity, low power consumption, wide measurement range, quick response, anti-pollution, high
stability, high performance-price ratio.
2. Technical Specification:
Operating range: humidity(20-95%RH) temperature(0-60Celsius)
Power supply: 1.5V AC(Max sine)
Operating frequency: 500Hz-2kHz
Rated power: 0.2mW(Max sine)
Central value: 31kΩ(at 25Celsius, 1kHz ,1V AC, 60%RH)
Impedance range: 19.8-50.2kΩ(at 25Celsius, 1kHz ,1V AC, 60%RH)
Accuracy: +-5%RH
Hysteresis: +-1%RH
Long-term stability: +-1%RH/year
Response time: <10s
3. Main parts
Item. Part Reference
1 Sensor case Polycarbonate
2 Substrate PCB board
3 Sensing material Polymer organic materials
4 Electrode Copper clad laminate
with immersion gold
5 Lead time Phosphor bronze
Aosong Electronics Co., Ltd.
http://www.aosong.com
Thomas Liu (Sales Manager)
Email:
[email protected] ,
[email protected] Your specialist in innovating humidity & temperature sensors
4. Performance parameter(at 1KHz) Unit: ohm
5. Impedance performance (at25℃ 1V AC 1kHz)
6. Stability test
No. Item Description Consquence
1 Strength of 0.5KG &10 seconds in the axial No abnormal change in terms of
terminations direction of lead terminal appearance & electrical characteristics
2 Shock resistance Drop down 3 times from height No abnormal change in terms of
of 1meter appearance & electrical characteristics
3 Vibration resistance 2 hours each in the directions of No abnormal change in terms of
X-Y-Z, at the frequency of appearance & electrical characteristics
10-55Hz & amplitude of 1.5mm
4 Resistance to The lead terminal shall be No abnormal change in terms of
soldering heat Immersed by 3 mm from the appearance & electrical characteristics
Aosong Electronics Co., Ltd.
http://www.aosong.com
Thomas Liu (Sales Manager)
Email: [email protected] , [email protected]
Your specialist in innovating humidity & temperature sensors
substrate for 3 seconds in solder
bath of 260±5℃
5 Heat resistance 1000 hours@70℃ < ±5%RH
6 Cool resistance 1000 hours@-30℃ < ±5%RH
7 Humidity resistance 1000 hours@40℃ < ±5%RH
8 Humidity cycle Repeat 100 cycles < ±5%RH
Each cycle:
30 minutes@-30℃
30 minutes@85℃
9 Voltage resistance 3000 hours@1KHz, 1Vrms < ±5%RH
7. Dimensions
Cautions:
(1) Avoid polarization, driving voltage or current should be 100% alternative.
(2) Please measure the sensor with LCR alternative-current bridge, don't use multimeter.
(3) Avoid dew condensation.
(4) Recommended storage conditions: temperature 0-60Celsius; humidity <80%RH
Aosong Electronics Co., Ltd.
http://www.aosong.com
Thomas Liu (Sales Manager)
Email:
[email protected] ,
[email protected]
