POLITEKNIK SEBERANG PERAI
DEPARTMENT OF INFORMATION AND COMMUNICATION
TECHNOLOGY
DFN 50133
NETWORK DESIGN
SESSION 2 2023/24
CASE STUDY 1
NO REGISTRATION NO. NAME
1. 10DDT22F1081 SARVINDERKUMAR A/L MUTHUKKUMAR
2. 10DDT22F1082 MUHAMAD FARUK BIN PREM NASIR
3. 10DDT22F1079 MOKAN A/L SUNDRAM
TOTAL MARKS: 100
DEPARTMENT OF INFORMATION & COMMUNICATION TECHNOLOGY
CASE STUDY 1 | SESSION 2 2023 2024
COURSE CODE : DFN50133 COURSE NAME : NETWORK DESIGN
NAME : REGISTRATION NO:
CLO1 P3 : Reproduce network design methodologies for campus network prototype in network
development
CLASS : DURATION : 4 Hours
Learning Objectives
Build the architecture of three-layer hierarchical network design
Perform Configuration
Scenario
An International Company based in Putrajaya, plans to hire new employees by further expanding
their company.
Based on the given situation, the International Company has appointed your company as a
consultant to establish a network in their company. As the team leader, you and the other members
are required to complete the task.
Figure 1: Floor Plan
Your requirement design based on addressing table below:
Device Range IP Address Subnet Mask
R1 1.1.1.1 255.255.255.252
Core Router 2.2.2.1 255.255.255.252
R2 192.168.1.65 255.255.255.192
Office 1 1.1.1.2 255.255.255.252
Office 2
R3 192.192.1.129 255.255.255.192
Office 3 192.168.1.193 255.255.255.192
Office 4 192.168.1.225 255.255.255.224
Office 5
Wireless Router (Office 1) 192.168.1.1 255.255.255.192
PC1- Office 1 : 30 host 192.168.1.1 – 255.255.255.192
192.168.1.63
PC2- Office 2: 25 host 192.168.1.64 – 255.255.255.192
192.168.1.127
PC3- Office 3: 30 host 192.168.1.128 – 255.255.255.192
192.168.1.191
PC4- Office 4: 20 host 192.168.1.192 – 255.255.255.224
192.168.1.223
PC5-Office 5: 15 host 192.168.1.224 – 255.255.255.224
192.168.1.255
Task
1. Complete the addressing table using network address 192.168.1.0/26
2. Design network topology based on addressing table.
3. Show physical and logical address.
4. Build wireless for Setup SSID_Office 1.
5. Design simulation using packet tracer.
Guidelines for the Case Study 1:
1. This is a group assessment consists of maximum 3 students in a group.
2. Submit your report in SOFTCOPY form BY ______________.
3. Submit your report through CIDOS.
Topology: -
R1 (core router) Configuration:
R2 Configuration:
R3 Configuration:
Wireless Router:
