Click here for more information:
elandcables.com | EV Charging Cable
Eland EV Connection Cable
APPLICATION BSI KITEMARK™ TESTED
Class 5 flexible power cable for use internally and externally in free
air, in pipes and ducts, on masonry and in metal structures. Cables are tested and verified by
The Cable Lab® to confirm they meet
Enhanced DC Power rating makes it ideal for high-powered Cable Testing
Verification
the quality standards required of the
charging stations. Suitable for installations with possibility of water KITEMARK™
BSI Cable Testing Verification Kitemark™.
immersion (AD7). G16 quality HEPR insulation with low corrosive KM 662609
gas emission and low fire propagation properties.
STANDARDS
CHARACTERISTICS EN 50620, IEC 62893, IEC 60502-1, EN 50575:2014,
Nominal Voltage Uo/U (Um) EN 50575/A1:2016
AC: 0.6/1 (1.2)kV | DC: 1.8/1.8 (1.8)kV
Test Voltage THE CABLE LAB®
AC: 4kV | DC: 9.6kV AN ISO/IEC 17025 AND IECEE CBTL ACCREDITED FACILITY
Our world-class testing facility assures the quality and compliance of this cable
Temperature Range through a continuous and rigorous testing regime.
Operating: -15ºC to +90ºC
Minimum installation temperature: 0ºC
Maximum Short Circuit Temperature to
240 mm²: +250ºC
Above 240 mm²: +220ºC
SUSTAINABILITY COMMITMENT
Minimum Bending Radius We are on a journey to Net Zero.
Power flexible cables: 4 x overall diameter We've committed to near-term emissions reductions and a net-zero target with the
Control flexible cables: 6 x overall diameter Science Based Targets initiative and we're a signatory to the United Nations Global
Compact Sustainable Development Goals.
Learn more about embodied carbon and our carbon emissions reduction actions,
Maximum pulling stress
our comprehensive recycling services, and wider ESG activities for sustainable
50 N/mm² operations at: www.elandcables.com/company/about-us/esg-sustainability
CONSTRUCTION
Conductor
Class 5 Flexible Copper Conductor
Insulation
Elastomeric mixture insulation, G16 quality REGULATORY COMPLIANCE
This cable is compliant with European Regulation EN 50575, the Construction
Filler Products Regulation.
Non-Fibrous, Non Hygroscopic
Outer Sheath
PVC (Polyvinyl chloride) R16 type
Core Identification This cable meets the requirements of the Low Voltage Directive 2014/35/EU,
1 core: Black the RoHS Directive 2015/65/EU and Reach Directive EC 1907/2006. RoHS
compliance has been tested and confirmed by The Cable Lab®.
Outer Sheath Colour
Light Grey
UK T 020 7241 8787 | F 020 7241 8700 | [email protected] | www.elandcables.com
technicalspecification
International T +44 20 7241 8740 | F +44 20 7241 8700 |
[email protected] Click here for more information:
elandcables.com | EV Charging Cable
DIMENSIONS
ELAND NO. OF NOMINAL CROSS NOMINAL DIAMETER NOMINAL MAXIMUM NOMINAL
PART NUMBER CORES SECTIONAL AREA OF CONDUCTOR THICKNESS OF OUTER DIAMETER WEIGHT
mm2 mm INSULATION mm kg/km
mm
B2E010040GR 1 4 2.6 0.7 9.30 82
B2E010060GR 1 6 3.4 0.7 9.90 101
B2E01010GR 1 10 4.4 0.7 10.9 152
B2E01016GR 1 16 5.7 0.7 11.4 211
B2E01025GR 1 25 6.9 0.9 13.2 301
B2E01035GR 1 35 8.1 0.9 14.6 396
B2E01050GR 1 50 9.8 1 16.4 556
B2E01070GR 1 70 11.6 1.1 17.3 761
B2E01095GR 1 95 13.3 1.1 20.4 991
B2E01120GR 1 120 15.1 1.2 22.4 1219
B2E01150GR 1 150 16.8 1.4 24.8 1517
B2E01185GR 1 185 18.6 1.6 27.2 1821
B2E01240GR 1 240 21.4 1.7 30.4 2366
B2E01300GR 1 300 23.9 1.8 33.0 2947
B2E01400GR 1 400 27,5 2 37.7 3870
ELECTRICAL CHARECTERISTICS
NOMINAL CROSS NOMINAL ELECTRICAL CURRENT CARRYING CAPACITIES
SECTIONAL AREA RESISTANCE AT 20°C A
mm2 ohm/km
20°C In Ground/In Duct 30° In Conduit (in Air) 30°C In Air
4 4.95 35 37 45
6 3.3 44 48 58
10 1.91 59 66 80
16 1.21 77 88 107
25 0.78 100 117 135
35 0.554 121 144 169
50 0.386 150 175 207
70 0.272 184 222 268
95 0.206 217 269 328
120 0.161 259 312 383
150 0.129 287 355 444
185 0.106 323 417 510
240 0.0801 379 490 607
300 0.0641 429 - 703
400 0.0486 541 - 823
UK T 020 7241 8787 | F 020 7241 8700 | [email protected] | www.elandcables.com
technicalspecification
International T +44 20 7241 8740 | F +44 20 7241 8700 |
[email protected]
