Scribd
Upload
50 views2 pages

Silres BS 1346

Uploaded by

trabelsicyrine53
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views2 pages

Silres BS 1346

Uploaded by

trabelsicyrine53
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SILRES® BS 1346

MASONRY W ATER REPELL ENTS

Product description aqueous masonry paints or plasters during or after


their production. The addition of 1 to 3 wt.-% is
SILRES® BS 1346 is a nonionic, solvent-free, water- recommended.
dilutable emulsion of a reactive polysiloxane.

Storage

Application The 'Best use before end' date of each batch is shown
on the product label.
SILRES® BS 1346 is used in undiluted form as a
hydrophobizing additive for aqueous masonry paints or Storage beyond the date specified on the label does
plasters to increase water repellency, water resistance not necessarily mean that the product is no longer
and water vapour permeability as well as to enhance usable. In this case however, the properties required
processability and anti-blocking properties. for the intended use must be checked for quality
assurance reasons.
Suitable for:

- silicone resin emulsion paints and


silicone resin emulsion plasters Safety notes
- silicate emulsion paints and plasters
- highly-filled emulsion-based coatings Comprehensive instructions are given in the
- emulsion-modified whitewash corresponding Material Safety Data Sheets. They are
- stoppers available on request from WACKER subsidiaries or
may be printed via WACKER web site
Paints and plasters modified SILRES® BS 1346 are http://www.wacker.com.
characterized by an excellent water beading effect.

Processing

SILRES® BS 1346 can be added in undiluted form to

Product data

Typical general characteristics Inspection Method Value


Appearance milky
Solids content approx. 55 wt. %
pH-Value at 20 °C Indicator strips approx. 7,5

These figures are only intended as a guide and should not be used in preparing specifications.

Technical data sheet for SILRES® BS 1346 / Version: 1.1 / Date of last alteration: 06.11.2014 1/2
The data presented in this medium are in accordance with the present state of our knowledge but The management system For technical, quality, or
do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the has been certified product safety questions,
right to alter product constants within the scope of technical progress or new developments. The according to please contact:
recommendations made in this medium should be checked by preliminary trials because of DIN EN ISO 9001 and
conditions during processing over which we have no control, especially where other companies’ DIN EN ISO 14001 Wacker Chemie AG
raw materials are also being used. The information provided by us does not absolve the user from Hanns-Seidel-Platz 4
the obligation of investigating the possibility of infringement of third parties’ rights and, if necessary, WACKER® is a trademark 81737 München, Germany
clarifying the position. Recommendations for use do not constitute a warranty, either express or of [email protected]
implied, of the fitness or suitability of the product for a particular purpose. Wacker Chemie AG.
SILRES® is a trademark www.wacker.com
of
Wacker Chemie AG.

Technical data sheet for SILRES® BS 1346 / Version: 1.1 / Date of last alteration: 06.11.2014 2/2

You might also like