lOMoARcPSD|21958636

BBM 311 Human Resource Management Module

Human resource management (Mount Kenya University)

Scan to open on Studocu

Studocu is not sponsored or endorsed by any college or university

Downloaded by Barke Yassir ([email protected])
 lOMoARcPSD|21958636

P.O. Box 342-01000 Thika

Email: [email protected]
Web: www.mku.ac.ke

DEPARTMENT OF MANAGEMENT

COURSE CODE: BBM 311

COURSE TITLE: HUMAN RESOURCE MANAGEMENT

Instructional Material for BBM- Distance Learning

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

COURSE OUTLINE

BBM 311: HUMAN RESOURCE MANAGEMENT

Contact hours: 42
Pre-requisites: None

Purpose: To introduce learners to the field of human resource management by exposing them to
the key areas

Expected Learning Outcomes of the Course:

By the end of the course, students should be able to:-
i) Describe the organizational human recourse process
ii) Discuss the methods and process of performance appraisal and compensation
iii) Discuss the importance of training and development
iv) Describe the procedures involved in job design and evaluation

Course Content:
Lesson 1: Organizational assessment and human resource planning;
 Definition of Human Resource Management
 Management functions of Human Resource Management
 Operative functions of Human Resource Management
 Challenges of Modern Human Resource Management

Lesson 2: Employee recruitment and selection;

 Forecasting the supply of inside candidates
 Forecasting the supply of outside candidates
 Effective recruiting
 Internal sources of candidates
 Hiring employees- the second time around
 Succession planning

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

 Outside sources of candidates

Lesson 3: Job Analysis

 Uses of job Analysis Information
 Steps in Job Analysis
 Methods of Collecting Job Analysis Information
 Interview Guidelines
 Writing Job Descriptions

Lesson 4: Performance appraisal and compensation;

 Performance management
 The performance appraisal review process
 Performance Appraisal methods
 Implementing performance management
 The appraisal interview
 Improving perfomance

Lesson 5: Job evaluation;

 Purpose of Job Evaluation
 Job Evaluation Methods
 Non-analytical methods
 Analytical methods

Lesson 6: Employee Testing and Selection

 Negligent hiring
 Basic testing concepts
 Types of interviews
 Interviewing and the law: Employment Discrimination “ Testers“
 Guidelines for Conducting an Interview

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Lesson 7: Training and development;

 Training
 Development
 The training process
 Training methods

CAT

Lesson 8: Job design;

 Approaches to Job Design
 Changing Technology in Office Systems

Lesson 9: Labor relation;

 The elements of employee relations
 Industrial relations as a system of rules
 Collective bargaining
 The human resource management approach to employee relations
 The parties to industrial relations
 Role of the human resource function in employee relations
 Employee relations policies
 Third party dispute resolution

Lesson 10: Diversity and gender issues in the workplace;

 The issue of equal pay or comparable worth
 Two tier pay
 Fair and square
 Variable pay

Lesson 11: Government involvement in human resource issues;

 Human Resource Development Policy

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

 Role of the government in human resource development

 Ministry of Labour
 Industrial Court of Kenya

Lesson 12: Job satisfaction and motivation to work

 Motivation
 Reasons for Pay Performance Plans
 Types of Incentive programs

Lesson 13: The Success System: Human Resource Management Strategy

 Human Resource Management Strategy
 Organizational Strategy

Teaching / Learning Methodologies: Lectures and tutorials; group discussion; demonstration;

Individual assignment; Case studies

Instructional Materials and Equipment: Projector; test books; design catalogues; computer
laboratory; design software; simulators

Course Assessment
Examination - 70%; Continuous Assessment Test (CATS) - 20%; Assignments - 10%; Total -
100%

Recommended Text Books:

i) Michael Armstrong (2001), A Handbook of Human Resource Management (8th Edition),
Millennium Edition
ii) Wayne F. Cascio (2006), Managing Human Resources; Tata Mgraw Hill
iii) J.Matthewman (2006), Human Resources Effectiveness; Jaico Publiching House

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Text Books for further Reading:

i) C.B Mamoria & S.V Gankar (2003), A text book of Human Resource Management,
Himalayan Publishing House

Module Author: Ann N. Kariuki

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

TABLE OF CONTENTS
COURSE OUTLINE ...................................................................................................................... 2
LESSON ONE .............................................................................................................................. 10
ORGANIZATIONAL ASSESSMENT AND HUMAN RESOURCE PLANNING ................... 10
1.1 DEFINITION OF HUMAN RESOURCE MANAGEMENT ................................................ 11
1.2: MANAGEMENT AND OPERATIVE FUNCTIONS: ......................................................... 12
1.3 THE ROLE OF THE HUMAN RESOURCE MANAGER ................................................... 15
1.4 CHALLENGES OF MODERN HUMAN RESOURCE MANAGEMENT .......................... 15
LESSON TWO ............................................................................................................................. 19
JOB ANALYSIS........................................................................................................................... 19
2.1 THE NATURE OF JOB ANALYSIS..................................................................................... 19
2.2 USES OF JOB ANALYSIS INFORMATION ....................................................................... 20
2.3 STEPS IN JOB ANALYSIS ................................................................................................... 22
2.4 METHODS OF COLLECTING JOB ANALYSIS INFORMATION ................................... 23
2.5 WRITING JOB DESCRIPTIONS .......................................................................................... 28
LESSON THREE.......................................................................................................................... 32
HUMAN RESOURCE PLANNING AND RECRUITMENT ..................................................... 32
3.1 EMPLOYMENT PLANNING AND FORECASTING ......................................................... 33
3.2 EFFECTIVE RECRUITING .................................................................................................. 37
3.3 FINDING INTERNAL CANDIDATES................................................................................. 40
3.4 OUTSIDE SOURCES OF CANDIDATES ............................................................................ 42
LESSON FOUR ............................................................................................................................ 45
EMPLOYEE TESTING AND SELECTION ............................................................................... 45
4.0: INTRODUCTION ................................................................................................................. 45
4.1 WHY CAREFUL SELECTION IS IMPORTANT ................................................................ 45
4.2 BASIC TESTING CONCEPTS.............................................................................................. 46
4.3 INTERVIEWING CANDIDATES ......................................................................................... 48
LESSON FIVE.............................................................................................................................. 60
PERFORMANCE APPRAISAL AND MANAGEMENT.......................................................... 60
5.1 PERFORMANCE MANAGEMENT ..................................................................................... 61
5.2 THE PERFORMANCE APPRAISAL REVIEW PROCESS ................................................ 63

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

5.3 PERFORMANCE APPRAISAL METHODS ........................................................................ 64

5.4 PERFORMANCE APPRAISAL PROBLEMS ...................................................................... 70
5.5 THE APPRAISAL INTERVIEW ........................................................................................... 71
5.6 IMPROVING PERFOMANCE .............................................................................................. 73
5.7 IMPROVING INEFFECTIVE PERFORMANCE ................................................................. 74
LESSON SIX ................................................................................................................................ 77
TRAINING AND DEVELOPING HUMAN POTENTIAL ........................................................ 77
6.1 TRAINING ............................................................................................................................. 78
6.2 THE TRAINING PROCESS .................................................................................................. 79
LESSON SEVEN.......................................................................................................................... 87
DIVERSITY AND GENDER ISSSUES IN THE WORK PLACE ............................................. 87
7.1 THE ISSUE OF EQUAL PAY OR COMPARABLE WORTH ............................................ 87
7.2 TWO TIER PAY..................................................................................................................... 87
7.3 FAIR AND SQUARE ............................................................................................................. 87
7.4 VARIABLE PAY ................................................................................................................... 88
LESSON EIGHT .......................................................................................................................... 90
MOTIVATING IN CHANGING TIMES PAY FOR THE PERFORMANCE ........................... 90
8.1 MOTIVATION ....................................................................................................................... 90
8.2 TYPES OF INCENTIVE PROGRAMS ................................................................................. 92
LESSON NINE ............................................................................................................................. 97
LABOUR RELATIONS ............................................................................................................... 97
9.1 THE ELEMENTS OF EMPLOYEE RELATIONS ............................................................... 97
9.2 INDUSTRIAL RELATIONS AS A SYSTEM OF RULES ................................................... 98
9.3 COLLECTIVE BARGAINING.............................................................................................. 99
9.4 THE HRM APPROACH TO EMPLOYEE RELATIONS .................................................. 101
9.5 THE PARTIES TO INDUSTRIAL RELATIONS ............................................................... 102
9.6 ROLE OF THE HR FUNCTION IN EMPLOYEE RELATIONS....................................... 105
9.7 EMPLOYEE RELATIONS POLICIES ............................................................................... 106
9.8 THIRD PARTY DISPUTE RESOLUTION......................................................................... 107
LESSON TEN............................................................................................................................. 109
GOVERNMENT INVOLVEMENT IN HUMAN RESOURCE ISSUES ................................. 109

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

10.1 HUMAN RESOURCE DEVELOPMENT POLICY.......................................................... 109

10.2 ROLE OF THE GOVERNMENT IN HUMAN RESOURCE DEVELOPMENT ............ 110
10.3 GOVERNMENT INSTITUTIONS INVOLVED IN HUMAN RESOURCE ISSUES ..... 110
LESSON ELEVEN ..................................................................................................................... 112
JOB DESIGN .............................................................................................................................. 112
11.1 JOB DESIGN ...................................................................................................................... 112
11.2 APPROACHES TO JOB DESIGN .................................................................................... 113
11.3 CHANGING TECHNOLOGY IN OFFICE SYSTEMS .................................................... 114
LESSON TWELVE .................................................................................................................... 117
JOB EVALUATION .................................................................................................................. 117
12.1 PURPOSE OF JOB EVALUATION .................................................................................. 117
12.2 JOB EVALUATION METHODS ...................................................................................... 118
LESSON THIRTEEN ................................................................................................................. 126
THE SUCCESS SYSTEM: HRM STRATEGY......................................................................... 126
13.1 HRM STRATEGY.............................................................................................................. 126
13.2 ORGANIZATIONAL STRATEGY ................................................................................... 127
SAMPLE PAPER 1 .................................................................................................................... 129
SAMPLE PAPER 2 .................................................................................................................... 131

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON ONE

ORGANIZATIONAL ASSESSMENT AND HUMAN RESOURCE PLANNING

Lesson Objectives
By the end of this lesson, you should be able to:
a) Answer the question “What is Human Resource Management?”
b) Describe the various management and operative functions of Human Resource
Management
c) Discuss the components of the changing environment of Human Resource
Management.

1.0 Introduction
At one time in history, “Liking people” appeared to be sufficient for choosing to work in the
field of known as “Human Resources (or Personnel) Management. Preferring to work with
humans rather than objects is still important; but it is grossly insufficient in these modern times.
Human Resource Management one of our most complex and challenging fields of endeavor. Not
only the firm’s requirements for an effective work force be met, the human resource manager
must be greatly concerned with the expectations of both employees and society in general.
Society at large has proclaimed it human resources to have vital needs that move beyond a ‘work
force’ status. The employee is simultaneously an instrument of the firm, a human being, and a
citizen.

In this first lesson of the course, we discuss the definition of human resource management, and
look closely at the major components of the definition. We also discuss the major challenges
facing the modern human resource manager.

10

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

1.1 Definition of Human Resource Management

It is appropriate to offer at the beginning of the discussion a definition of the subject to be
covered.
Gary Dessler (1997) defines human resource management as the policies and practices that you
need to carry out the “people” or personnel aspects of your management job.
These aspects include:
 Conducting job analyses (determining the nature of each employee’s job)
 Planning labour needs and recruiting job candidates.
 Selecting job candidates
 Orienting and training new employees
 Managing wages and salaries (how to compensate employees)
 Providing incentives and benefits.
 Appraising performance
 Communicating (interviewing, counseling, disciplining) and safety policy.
 Implementing the organizations safety policy
 Training and developing
 Planning and developing
 Planning for the effects of change on staff.
 Building employee commitment and creating conditions for high morale.
 Implementing grievance and disciplinary machinery
 Negotiating with employee representatives.
A more detailed definition of human resource management is presented by Edwin Flippo (1984),
and we will use that definition to present an outline of this entire module. In the first place, we
are dealing with two categories of functions, managerial and operative.
A manager is one who exercises authority and leadership over other personnel; the president of a
firm is certainly a manager, and so also is the department head or supervisor. On the other hand,
an operative is one who has no authority over others but has been given a specific task or duty to
perform under managerial supervision. Thus, the human resource manager is a manager and as
such must perform the basic function. Yet a comprehensive definition of human resource
management much include also the operative functions in the field. In outline form, the
definition would appear as follow:

11

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

1.2: Management and Operative Functions:

1. Management functions
i) Planning
ii) Organizing
iii) Directing
iv) Controlling
2. Operative functions
a) Procurement
b) Development
c) Integration
d) Maintenance
e) Separation
Human resource management therefore can be defined as the planning, organizing, directing and
controlling of the procurement, development, compensation, maintenance and separation of
human resources to the end that individual, organizational and societal objectives are
accomplished. A brief elaboration of the component parts of this definition follows.

Planning: Effective managers realize that a substantial portion of their time should be devoted to
planning. For the human resource manager, planning means the determination in advance of a
human resource program that will contribute to goals establishment will involve the active and
enlightened participation of the human resource manager, with his or her expertise in the area of
human resources.

Organizing: After a course of action has been determined, an organization must be established
to carry it out. An organization is a means to an end. Once it has been determined that certain
human resource functions contribute toward the firm’s objectives, the human resource manager
must form an organization by designing the structure of relationships among jobs, human
resource and physical and physical factors. One must be aware of the complex relationship that
exists between the specialized unit and the rest of the organization. Because of increasing
expertise in this function, much top management are looking to the human resource manager for
advice in the general organization of the enterprise.

12

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Directing: At least in theory, we now have a plan and an organization to execute that plan. It
might appear that the next logical function would be that of operation, doing the job. But it has
been found that a “starter” function is becoming increasingly necessary. In our above definition
this function was labeled “direction”, but it may be called by other names, such as “motivation”,
“actuation”, or “command”. At any rate a considerable number of difficulties are involved in
getting people to go to work willingly and effectively.
Controlling: Now, at last, the human resource functions are being performed. But what is the
management duty at this point? It is logical that its functions should be that of control that is the
observation of action and its comparison with plans and the correction of any deviations that may
occur, or at times, the realignment of plans and their adjustment to unchangeable deviations.
Control is the managerial function concerned with regulating activities in accordance with the
personnel plan, which in turn was formulated on the basis of an analysis of fundamental
organization goals.

Procurement: This first operative function of human resource management is concerned with
obtaining of the proper kind and number of personnel necessary to accomplish organization
goals. It deals specifically with such subjects as the determination of human resources
requirements and their recruitment, selection and placements. The determination of human
resource required must rest upon a prior design of job duties, a decision that is increasingly being
affected by the human resource manager’s objective of meeting human society’s requirements
often affects procurement programs in the forms of affirmative action and equal opportunity. The
actual hiring process entails a multitude of activities designed to screen personnel, such as
reviewing application forms, psychological testing, checking references and conducting
interviews.

Development: After personnel have been obtained, they must be to some degree developed.
Development has to do with the increase of skill, through training, that is necessary for proper
job performance. This is an activity of very great importance and will continue to grow because
of the changes in technology, the realignment of jobs and the increasing complexity of the
managerial task.

13

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Compensation: This function is defined as the adequate and equitable remuneration of

personnel for their contributions to organization objectives. Though some recent morale surveys
have tended to minimize the importance of monetary income to employees, we nevertheless
contend that compensation is one of the most important resource management. In dealing with
this subject, we shall only economic compensation. Psychic income is classified elsewhere. The
basic elements of a compensation program have emphasis upon such subjects as job evaluation,
wage policies, wages systems and come of the recently devised extra compensation plans.

Integration: With the employee procured, developed and reasonably compensated, there follows
one of the most difficult and frustrating challenges to management. The definition labels this
problem “integration”. It is concerned with the attempt to effect a reasonable reconciliation of
individual, societal and organizational interest. It rests upon a foundation of belief that
significant overlapping of interests so exist in our society. Consequently, we must deal with the
feelings and attitudes of personnel in conjunction with the principles and policies of
organizations.

Maintenance: If we have executed the foregoing functions well, we now have a wiling and able
work force. Maintenance is concerned with the perpetuation of this state. The maintenance of
willingness is heavily affected by communications with employees. The physical condition of
the employees should also be maintained.

Separation: If the first function of human resource management is to secure the employee, it is
logical that the last should be the separation and return of that person to society. Most people so
not die on the job. The organization is responsible for meeting certain requirements of due
process in separation, as well as assuring that the returned citizen is in good shape as possible.
Types of separation are as retirement, layoff, out-placement and discharge.

The purpose of all the activity outlined above, both managerial and operative, is to assist in the
accomplishment of basic objectives. Consequently, the starting point of human resource
management, as of all management, must be a specification of those objectives and a
determination of the sub-objectives of the human resource function. The expenditure of all funds

14

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

in the personnel area can be justified only insofar as there is a net contribution toward basic
goals. For the most part these are goals of the particular organization concerned. But as
suggested earlier, society is tending to impose human goals upon the private business enterprise,
goals that may or may not make an immediate contribution to an organization’s particular
objective.

1.3 The Role of the Human Resource Manager

Every organization has a human resource function, whether or not a specific human resource
manager has been so designated. Every organization must hire, train, motivate, maintain and
ultimately separate employees. If a specialized human resource manager exists he or she can
contribute much to greater organizational effectiveness. In the past assignment to this function
often constituted a one-way ticket to oblivion. But today, the increasingly critical nature of
problems and challenges in the more effective utilization of human resources has greatly
elevated the status of the field.

Most expert agree that there are five basic functions all managers perform: planning, organizing,
staffing, leading and controlling. In the total these functions represent the management process.

1.4 Challenges of Modern Human Resource Management

We need not look far to discover challenging problems in the field of human resource
management. Managers may ignore or attempt to bury human resource problems, but these will
not lie dormant because of the very nature of the problem component. Many problems are caused
by constant changes that occur both within and without the firm. Among the many major
changes that are occurring, the following will illustrate the nature of the human resource
challenges.
 Changing mix of the work force
 Changing personal values of the work force.
 Changing expectations of citizen-employees.
 Changing levels of productivity.

15

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

1.4.1 Changing mix of the work force

Through each person is unique and consequently presents a challenge to our general
understanding. One can also appreciate broader problems by categorizing personnel to delineate
and highlight trends. Among the major changes in the mix of personnel entering the work force
are:
i. Increased numbers of minority members entering occupations requiring greater skills.
ii. Increasing levels of formal education for the entire work force.
iii. More female employees.
iv. More married female employees.
v. More working mothers
vi. A steady increasing majority of white-collar employees in place of the blue-collar.
The challenge has had much to do with many of the above-listed changes. Prohibition of
discrimination and requirements for positive action to redress imbalances in work force mix have
led to greater numbers of minority personnel being hired for all types of jobs.

1.4.2 Changing personal values of the work force

The changing mix of the work force inevitably leads to introduction of new values to
organizations. In the past and continuing into the present, the work force has been heavily
imbued with a set of values generally characterized by the term “work ethic”. Work is regarded
as having spiritual meaning, buttressed by such behavioural norms as punctuality, honesty,
diligence and frugality. One’s job is a central life interest and provides the dominant clue I
interpersonal assessment. A work force with this set of values is highly adapted to use by
business organizations in their pursuit of the values of productivity, efficiency and effectiveness.

There is growing evidence that the work is declining in favor of a more existential view of life.
Instead of organizations providing the basic guides to living persons are responsible for
exploring and determining for themselves what they want to do and become. With this
philosophy, work becomes only one alternative among many as a means for becoming a whole
person in order to do one’s own thing”. Family activities, leisure, avocations and assignments in
government churches and schools are equally viable means through which a person can find
meaning and become self-actualized. The absolute worth of the individual is a value which is

16

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

merged with the concept that all people are members of the great human family. Concerning
specifics, full employment gives way to the full life. Climbing the organization ladder of success
for its accompanying materialistic symbols becomes less important than self-expression through
a creative accomplishment. Private lives outside the job and firm are relatively autonomous,
accompanied by an increasing reluctance to sacrifice oneself or one’s family for the good of the
organization. Quality of life is preferred to quantity, equity to efficiency, diversity to conformity
and the individual to the organization.

With respect to an increasing emphasis upon the individual as compared with the organization, a
number of changes in personnel programs have been tried. Attempts have been made to redesign
jobs to provide challenging activities that needs of the human ego.

1.4.3: Changing expectations of Citizen-employees.

There are increasing signs that external rights of citizenship are penetrating the boundaries of
business enterprises in the interest of improving the quality of work life. Two prominent
illustrations are:
i. Freedom of speech and
ii. The right to privacy.
Should employees be allowed to speak up and criticize the organization’s management and its
products without jeopardizing their job security? In public organizations, this right of “whistle
blowing” is fairly well protected.

1.4.4: Changing levels of productivity

Perhaps the most serious current problem facing all mangers, not just human resource managers,
is the declining productivity of the economy. Up until the 1960’s the typical annual increase in
production was approximately 3 percent. This figure was even placed as a guaranteed base for
increasing employee income. In the last two decades, the level of productivity has fallen
markedly.

17

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Review Questions
i) Identify and distinguish the four managerial functions and the six
operative functions of human resource management.
ii) With more females in the workforce, what major changes are
introduced into our society?
iii) Explain the challenges of modern human resource management.

Text Books for further reading

1. Dessler, G. (2002): Human Resource Management (9th Edition ).NJ,Prentice Hall
2. Flippo,E.B. (1984): Personnel management (6th edition ). Ny, Mcgraw hill
3. Harriman, A. (1985): Women/ men Management, NY, Praeger

18

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON TWO

JOB ANALYSIS

Lesson Objectives
By the end of this lesson the student should be able to:
a) Discuss the nature of job analysis, including what it is and how it is used.
b) Use at least three methods of collecting job analysis information, including
interviews, questionnaires and observation.
c) Explain what Job Analysis is.

2.0 Lesson Introduction

In this lesson, we turn our focus to the process of determining the duties and skill requirements
of a job, and the kind of people who should be hired for it – what is referred to as Job
Description. The purpose of the lesson is to show you how to analyze a job and write job
descriptions. We will see that analyzing jobs involves determining in detail what the job entails
and what kind of people the firm should hire for the job.

2.1 The Nature of Job Analysis

Organizations consist of positions that have to be staffed. Job analysis is the procedure through
which you determine the duties of these positions and the characteristics of the people to hire for
them. Job analysis produces information used for writing job descriptions (a list of a job’s duties,
responsibilities, reporting relationships, working conditions and supervisory responsibilities) and
job specification ( a list of a job’s “human requirements”, that is, the requisite education, skills,
personality, and so on).
The supervisor or HR specialist normally collects one or more of the following types of
information via the job analysis:
 Work activities: First, he or she collects information about the job’s actual work
activities, such as cleaning, selling, teaching or painting. This list may also include how
and when the worker performs each activity.

19

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

 Human behaviours: The specialist may also collect information about human behaviors
like sensing; communicating, deciding and writing. Included here would be information
regarding job demands such as lifting weights or walking long distances.
 Machines, tools, equipment and work aids: This category includes information regarding
tools used, materials processed and knowledge dealt with or applied (such as finance or
law) and services rendered (such as counseling or repairing).
 Performance standards: The employer may also want information about the job’s
performance standards (in term of quantity or quality levels for each job duty, for
instance). Management will use these standards to appraise employees.
 Job context: Included here is information about such matters as physical working
conditions, work schedule and the organizational and social context – for instance, the
number of people with whom the employee would normally interact. Information
regarding incentives might also be included here.
 Human Requirements: This includes information regarding the job’s human
requirements, such as job-related knowledge or skills (education, training, work
experience) and required personal attributes (aptitudes, physical characteristics,
personality, interests).

2.2 Uses of job Analysis Information

Job analysis, as summarized in figure 2.1, is the basic for several inter-related HR management
activities.
Job Analysis

Job Description

Recruiting and Performance Job Evaluation – Wage and Training

selection, Appraisal salary Decisions Requirements
Decisions (Compensations)

Source: Dessler, G. (2002) Human Resource Management Prentice Hall, NJ

Figure 2.1 Uses of Job Analysis Information

20

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Recruitment and Selection: Job analysis provides information about what the job entails and
what human characteristics are required to perform these activities. This information, in the form
of job description and specifications, helps management decide what sort of people to recruit and
hire.

Compensation; Job analysis information is crucial for estimating the value of each job and is
appropriate compensation. Compensation (such as salary and bonus) usually depends on the
job’s required skill and level, safety hazards, degree of responsibility and so on – all factors you
can assess through job analysis. Furthermore, many employers group jobs into classes (say,
secretary III and IV). Job analysis provides the information to determine the relative worth of
each job and thus appropriate class.

Performance Appraisal: A performance appraisal compares each employee’s actual

performance with his or her performance standards. Mangers use job analysis to determine the
job’s specific activities and performance standards.

Training: The job description should show the activities and skills – and therefore the training –
that the job requires.

Discovery Unassigned Duties; Job analysis can also help reveal unassigned duties. For example,
your company’s production manager says she’s responsible for a dozen or so duties, such as
production scheduling and raw material purchasing. Missing, however, is any reference to
managing raw material inventories? On further study, you learn that none of the other
manufacturing people are responsible for inventory management, either. You know from your
review of other jobs like these that someone should be managing inventories. You’ve uncovered
an essential unassigned duty, thanks to job analysis.

EEO Compliance: job analysis also plays a big role in EEO compliance. Job analysis is a
crucial in validating all major personnel activities. For example employers must be able to show
that their selection criteria and job performance are actually related. Doing this, of course
requires knowing what the job entails which in turn requires a job analysis.

21

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

2.3 Steps in Job Analysis

There are six steps in doing a job analysis.
Step 1: Decide how you’ll use the information since this will determine the data you collect and
how you collect them. Some data collection techniques like interviewing the employee and
asking what the job entails are good for writing job descriptions and selecting employees for the
job. Other techniques like the position analysis questionnaire described later do not provide
qualitative information for job descriptions. Instead they provide numerical ratings for each job;
these can be used to compare jobs for compensation purposes.

Step 2: Review relevant background information such as organization charts, process charts and
job descriptions. Organizational charts show the organization wide division of work how the job
in question relates to other jobs and where the job fits in the overall organization. Should also
show distribution of work, with whom the job incumbent communicates. A process chart
provides a more detailed picture of the workflow. It shows the flow of inputs to and outputs from
a particular job being analyzed.

Step 3: Select representative positions. Why? Because there may be too many similar jobs to
analyze. For example, it is usually unnecessary to analyze the jobs of 200 assembly workers
when a sample of 10 jobs will do.

Step 4: Actually analyze the job – by collecting data on job activities, required employee
behaviours, working conditions and human traits and abilities needed to perform the job. For this
step use one or more of the job analysis methods explained later in this lesson.

Step 5: Verify the job analysis information with the worker performing the job and with his or
her immediate supervisor. This will help confirm that the information is factually correct and
complete. This review can help gain the employee’s acceptance of the job analysis data and
conclusions; by giving that person a chance to review and modify your description of the job
activities.

22

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Step 6: Develop a job description and specification. These are two tangible products of the job
analysis. The job description is a written statement that describes the activities and
responsibilities of the job, as ell as its important features, such as working conditions and safety
hazards. The job specification summarizes the personal qualities, traits skills and background
required for getting the job done. It may be in a separate document or in the same document as
the job description.

2.4 Methods of Collecting Job Analysis Information

There are various ways to collect information on the duties, responsibilities and activities of a
job. In practice, you could use any one of them or you could combine the techniques that best fit
your purpose. Thus an interview might be appropriate for creating a job description, whereas the
position analysis questionnaire may be more appropriate for quantifying the worth of a job for
compensation purposes.

Conducting the job analysis usually involves a joint effort by an HR specialist (perhaps an HR
manager, job analyst or consultant) might observe and analyze the job and then develop a job
description and specification. The supervisor and worker may then review and verify the job
analyst’s conclusions regarding the job’s activities and duties. In practice firms usually collect
analysis data from multiple subject matter experts”. (Mostly job incumbents) using
questionnaires and interviews. They then average data from several employees from different
departments to determine how much time a typical employee spend on each of several specific
tasks. The problem is that employees who have the same job title but work in different
departments may have experience very different pressures. Therefore, simply adding up and
averaging the amount of time that, say, HR assistant need to devote to “interviewing candidates”
departmental context: The way someone with a particular job title spends his or her time is not
necessary the same from department to department. The job analysis process begins when the
analyst collects information from the worker and supervisor about the nature of the work and the
specific tasks the worker does.
Interviews, questionnaires, observation and diary/logs are the most popular methods for
gathering job analysis data. They al provide realistic information about what job incumbents
actually do. Managers use them for developing job descriptions and specifications.

23

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

1. The Interview
Managers use three types of interviews to collect job analysis data – individual interviews with
each employee, group interviews with groups of employees who have the same job and
supervisor interviews with one or more supervisors who know the job. They use group
interviews when a large number of employees are performing similar or identical work, since it
can be a quick and inexpensive way to gather information. As a rule, the workers’ immediate
supervisor attends the group session; if not, you can interview the supervisor separately to get
that person’s perspective on the job duties and responsibilities.
Whichever kind of interview you use, you need to be sure the interviewee fuly understands the
reason for the interview, since there’s a tendency for such interviews to be viewed rightly or
wrongly as “efficiency evaluations.” If so interviewees may hesitate to describe to describe their
jobs accurately.

Pros and Cons

The interview is probably the most widely used method for identifying a job’s duties and
responsibilities and its wide use reflects its advantages. It’s a relatively simple and quick way to
collect information, including information that might never appear on a written form. A skilled
interviewer can unearth important activities that occur only occasionally or informal contacts that
wouldn’t be obvious from the organization chart. The interview also provides an opportunity to
explain the need for and functions of the job analysis. And the employee can vent frustrations
that might otherwise go unnoticed by management.

Disadvantages
Distortion of information is the main problem – whether due to outright falsification or honest
misunderstanding. Job analysis is often a prelude a changing of job’s pay rate. Employees
therefore may legitimately view as an efficiency evaluation that may affect their pay. They may
then tend to exaggerate certain responsibilities while minimizing others. Obtaining valid
information can thus be a slow process and prudent analysts get multiple inputs.

Typical Questions
Despite their drawbacks, are widely used. Some typical interview questions include:

24

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

What is the job being performed?

What are the major duties of your position? What exactly do you do?
What physical locations do you work in?
What are the education, experience, skill and (where applicable) certificate and licensing
requirements?
In what activities do you participate?
What are the job’s responsibilities or performances standards that typify your work?
What are your responsibilities? What are the environmental and working conditions involved?
What are the job’s physical demands?
What are the emotional and mental demands?
What are the health and safety conditions?
Are you exposed to any hazards or unusual working conditions?
The best interviews follows structured or checklist format.

Interview Guidelines
Keep several things in mind when conducting a job analysis interview.
i. First, the job analyst and supervisor should work together to identify the worker who
know the job best – and preferably those who’ll be most objective in describing their
duties and responsibilities.
ii. Second, quickly establish rapport with the interviewee. Know the person’s name, speak
in easily understood language, briefly review the interview’s purpose and explain how
the person was chosen for the interview.
iii. Third, follow a structured guide or checklist, one that lists questions and provides space
for answers. This ensures you’ll identify crucial questions ahead of time and that all
interviews (if there’s more than one) cover all the required questions. (However, also
make sure to give the worker some leeway in answering questions and provide some
open-ended questions like, “was there anything we didn’t cover with our questions?”)
iv. Fourth, when duties are not performed in a regular manner – for instance, when the
worker doesn’t perform the same job over and over and over again many times a day –
ask the worker to list his or her duties in order of importance and frequency or

25

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

occurrence. This will ensure that you don’t overlook crucial but infrequently performed
activities – like a nurses occasional emergency room duties.
v. Finally, after completing the interview, review and verify the data. Specifically, review
the information with the worker’s immediate supervisor and with the interviewee.

2. Questionnaires
Having employees fill out questionnaires to describe their job-related duties and responsibilities
is another good way to obtain job analysis information. You have to decide how structured the
questionnaire should be and what questions to include. Some questionnaires answers are on a
scale e.g. 1 – 5 questionnaires are very structured checklists. Each employee gets an inventory of
perhaps hundreds of specific duties or tasks (such as “change and splice wire”). He or she is
asked to indicate whether or not he or she performs each task and if so how much time is
normally spent on each. At the other extreme the questionnaire can be open-ended and simply
ask the employee to “describe the major duties of your job”.
Person has a lee-way to put in his/her own words whether structures or unstructured,
questionnaires have both pros and cons. A questionnaire is a quick and efficient way to obtain
information from a large number of employees; it’s less costly than interviewing hundred of
workers for instance. However, developing the questionnaire and testing it (perhaps by making
sure the workers understand the questions) can be expensive and time consuming.
Disadvantage is that is is difficult to develop a questionnaire.

3. Observation
Direct observation is especially useful when job consist mainly of observable physical activities
– assembly-line worker and accounting clerk are examples. On the other hand, observation is
usually not appropriate when the job entails a lot of mental activity. (Lawyer design engineer).
Nor is it useful if the employee only occasionally engages in important activities, such as a nurse
who handles emergencies. And reactivity – the worker’s changing what he or she normally does
because you are watching – can also be a problem. Managers often use direct observation and
interviewing together. One approach is to observe the worker on the job during a complete work
cycle. (The cycle is the time it takes to complete the job, it could be a minute for an assembly-
line worker or an hour, a day, or longer for complex jobs). Here you take notes of all the job

26

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

activities. Then, after accumulating as much information as possible, you interview the worker.
Ask the person to clarify points not understand and to explain what other activities he or she
performs that you didn’t observe. You can also observe and interview simultaneously asking
questions while the worker performs his or her job.

4. Participant Diary/Logs
Another approach is to ask workers to keep a diary/log of what they do during the day, for every
activity he or she engages in, the employee records the activity (along with the time) in a log.
(Daily listings made by workers of every activity in which they engage along with the time each
activity takes). This can produce a very complete picture of the job. Especially when
supplemented with subsequent interviews with the worker and the supervisor. The employee, of
course, might try to exaggerate some activities and underplay others. However, the detailed,
chronological nature of the log tends to meditate against this.
Some firms take a high-tech approach to diary/logs. They give employees pocket dictating
machines and pagers. Then at random times during the day, they page the workers, who dictate
what they are doing at that time. This approach can avoid one pitfall of the traditional diary/log
method relying on workers to remember what they did hours earlier when they complete their
logs at the end of the day.

5. Position Analysis Questionnaire (PAQ)

Qualitative approaches like interviews and questionnaires are not always suitable. For example,
if your aim is to compare jobs for pay purposes, you may want to be able to assign quantitative
values to each job. This calls for the use of Quantitative Job Analysis Techniques and the
position analysis questionnaire is an example of such.
The position analysis questionnaire is a very structured questionnaire used to collect quantifiable
data concerning the duties and responsibilities of various jobs. It contains 194 items, each of
which (such as “written materials”) represents a basic element that may or may not play an
important role in the job. The analyst decides if each item plays a role and if so, what extent.
The advantage of the PAQ is that it provides a quantitative score or profile of any job in terms of
how that job rates on five basic activities:
a) Having decision-making/communication/social responsibilities.

27

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

b) Performing skilled activities.

c) Being physically active
d) Operation vehicles/equipment
e) Processing information
The advantage is that PAQ real strength is thus in classifying jobs. In other words, it lets you
assign a quantitative score to each job based on its decision-making, skilled activity, physical
activity, and vehicle/equipment, operation and information-procession characteristics. You can
therefore use the PAQ results to quantitatively compare jobs to one another and then assign pay
levels for each job.

Using Multiple Sources of Information

There are obviously many ways to obtain job analysis information. You can get it from
individual workers, groups or supervisors or from the observations of job analyst; for instance,
you can use interview, observations or questionnaires. Some firms use just one basic approach
like having the job analyst so interviews with current job incumbents. Yet a recent study suggests
that using just one source may not be wise.

The problem is the potential inaccuracies in people’s judgments. For example in a group
interview some group members may feel forced to go along with the consensus of the group; or
an employee may be careless about how he or she completes a questionnaire. What this means is
that collecting job analysis data from just interviews or just observations, may leaf to inaccurate
conclusions. It’s better to try to avoid such inaccuracies by using several types of respondents –
groups, individuals, observers, supervisors and analyst, make sure the questions and surveys are
clear and understandable to the respondents. And if possible, observe and question respondents
early enough in the job analysis process to catch any problems while there’s still time to correct
them.

2.5 Writing Job Descriptions

A job description is a written statement of what the worker actually does, how he or she does it
and what the job’s working conditions are. You use this information to write a job specification;
this list the knowledge, abilities and skills required to perform the job satisfactorily. There is no

28

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

standard format for writing a job description. However, most descriptions contain sections that
cover:
1. Job Identification
2. Job summary
3. Responsibilities and duties
4. Authority of incumbent
5. Standards of performance
6. Working conditions
7. Job specifications

1. Job Identification; Job identification section contains type of information. The job title
specifies the name of the job, such as supervisor of data processing operations, marketing
manager or inventory control clerk. Date is the date of the job description was actually written
and prepared by indicates who wrote it. There is also space to indicate who approved the
description and perhaps a space that shows the location of the job in terms of its plant/division
and department/section. This section might also include the immediate supervisor’s title and
information regarding salary and/or pay scale. There might also be space for the grade/level of
the job, if there is such a category. For example a firm may classify programmers, programmer
III and so on.

2. Job Summary: The job summary should describe the general nature of the job and includes
only its major functions or activates. Thus the marketing manager “plans, directs and coordinates
the marketing of the organizations products or services.” For the job of materials manager, the
summary might state that the “material necessary on the production line.” For the job of
mailroom supervisor, the mailroom supervisor receives, sorts and delivers all incoming mail
properly and he or she handles all outgoing mail including the accurate and timely posting of
such mail. Include general statements like,’’ perform other assignment as required” with care.
Such statements can give supervisors more flexibility in assigning duties. Some experts,
however, state unequivocally that one item frequently found that should never be included in a
job description is a cop-out clause like other duties, as assigned. Since this leaves open the nature
of the job and the people needed to staff it.

29

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

3. Relationship; There is occasionally a relationships statement, which shows the jobholders

relationships with others inside and outside the organization. For a human resource manger, such
a statement might like this:
Reports to: Vice president of employee relationships.
Supervises: Human resource clerk, test administrator, labor relations director and one
secretary.
Works with: All department mangers and executive management
Outside the company: Employment agencies, executive recruiting firms, union
representatives, state and various vendors.

4. Responsibilities and Duties; This section presents a list of the job’s major responsibilities
and duties. You list each of the job’s major duties separately and describe it I a few sentences.
This section should also define the lists of the jobholder’s authority, including his or her
decision-making authority direct supervision of other personnel and budgetary limitations.

5. Standards of Performance and Working Conditions; Some job descriptions contain a

standard of performance section. This lists the standards the employee is expected to achieve
under each of job description’s main duties and responsibilities. Setting standards is never an
easy matter. However, most managers soon learn that just telling subordinates to “do their best’
doesn’t provide enough guidance. One straightforward way of seeing standards is to finish the
statement; “I will be completely satisfied with your work when...” This sentence if completed for
each duty listed in the job description result in a usable set of performance standards.

6. Job Specifications; The job specification takes the job description and answers the question;
human traits and experience are required to do this job well?” It shows what kind of persons to
recruit and for what qualities that persons should be tested. The job specification may be a
section of the job description or a separate document entirely.

30

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Review Questions
i) What is job analysis? How can you make use of the information it provides?
ii) What items are typically included in the job description?
iii) Compare and contrast the methods for collecting job analysis data, explaining
what each is useful for and listing the pros and cons of each.
iv) Explain how you would conduct a job analysis for an educational institution.
v) What items are typically included in the job description? Briefly discuss each of
these items.

Text Books for further Reading

1. Dessler, G. (2002): Human Resource Management (9th Edition).NJ, Prentice Hall
2. Flippo, E.B. (1984 ): Personnel Management (6 th Edition). NY, McGraw-Hill
3. Harriman, A. (1985): Women/ Men Management. NY, Praeger

31

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON THREE

HUMAN RESOURCE PLANNING AND RECRUITMENT

Lesson Objectives
By the end of this lesson you should be able to:
a) Explain the main techniques used in employment planning and
forecasting.
b) Name and describe the main internal and outside sources of candidates.
c) Effectively recruit job candidates.
d) Forecast Personnel Needs in an organization.

3.0 Lesson Introduction

In the previous lesson, we discussed job analysis and the methods managers use to create job
descriptions and job specifications. The main purpose of this lesson is to help you improve your
effectiveness in recruiting job candidates. The main topics we will discuss include personnel
planning and forecasting, recruiting job candidates and developing and using job application
forms.
Personnel planning is the first step in the recruiting and selecting process. We can conveniently
view this process as a series of hurdles.

Steps in Recruitment and Selection Process

The recruitment and selection process as is a series of hurdles aimed at selecting the best
candidates for the job. The steps employed are summarized below.
1. Decide what position you will have to fill by engaging in personnel planning and
forecasting.
2. Build a pool candidates for these jobs by recruiting internal or external candidates.
3. Have applicants complete application forms and perhaps undergo an initial screening
interview.
4. Use selection techniques like tests, background investigations and physical exams to
identify viable candidates.

32

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

5. Finally, decide who to make an offer to, by having the supervisor and (perhaps) others on
the team interview the final candidates.
In the sections that follow, we discuss each of these steps in details.

3.1 Employment Planning and Forecasting

Employment or personnel planning is the process of deciding what positions the firm will have
to fill and how to fill them. Personnel planning covers all the firm’s future positions from
maintenance clerk to CEO. However, most firms use succession planning to refer to the process
of deciding how to fill the company’s most important executive jobs.

Employment planning is an integral part of a firm’s strategic and HR panning processes. A

firm’s plan to expand plans to enter new business, build new plants, or reduce costs all influence
the types of positions the firm will need to fill. One big question is whether to fill projected
openings from within or from outside the firm. In other words, should you plan to fill them with
current employees or by recruiting from outside?

Each option produces its own set of HR plans. Current employee may require training
development and coaching before they are ready to fill new jobs. Going outside requires
deciding what recruiting sources to use among other things.
Like all good plans, management builds employment plans on premises – basic assumptions
about the future. Forecasting generates these premises. If you’re planning for employment
requirements you’ll usually need to forecast three things Personnel needs, the supply of inside
candidates and the supply of outside candidates.

Factors to Consider When Forecasting

1. Demand for product/service.
2. Project turnover within the organization.
3.1.1 How to Forecast Personnel Needs
The expected demand for you product or service is paramount when forecasting personnel needs.
The usual process is therefore to forecast revenues first. Then estimate the size of the staff
required to achieve this volume. In addition to expected demand staffing plans may reflect.

33

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

1. Demand for product or service.

2. Projected labor turnover (as a result of resignation or terminations)
3. Quality and skills of your employees (relations to what you see as the changing needs of
your organization) – training needs.
4. Strategic decisions to upgrade the quality of products or services or enter into new
markets.
5. Technological and other changes resulting in increased productivity.
6. The financial resources available to your department.

Methods to Predict Employment Needs

1. Trend Analysis
This means studying variations in your firm’s employment levels over the last few years to
predict future needs. Thus you might compute the number of employees in your firm at the end
of the last five years or perhaps the number in each subgroup (like sales, production, secretarial
and administrative people) at the end of each of those years. The purpose is to identify trends that
might continue into the future. Trend analysis can provide an initial estimate, but employment
levels rarely depend just on the passage of time. Other factors (like inflation changes in sales
volume and productivity) also affect staffing needs.

II. Ratio Analysis

This means making forecasts based on the rations between some usual factor (like sales volume)
and the number of employees required (for instance, number of salesperson). For example,
suppose a salesperson traditionally generates Kshs. 500,000 in sales. If the sales revenue to
salespeople ratio remains the same you would require six new salespeople next year (each of
whom produces an extra Kshs.500, 000) to produce a hoped-for extra Kshs 3 million in sales
Like trend analysis, ratio analysis assumes that productivity remains about the same- for
instance, that each sales person can’t be motivated t produce much more than Kshs 500,000 in
sales. If sales productivity were to increase or decrease, the ratio of sales to salespeople would
change. A forecast based on historical rations would then no longer be accurate.
iii. The Scatter plot

34

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

A scatter plot shows graphically how two variables- such a measure of business activity and your
firm’s staffing levels- are related. If they are, then if you can forecast the level of business
activity, you should be able to estimate your personnel requirements.

Iv. Managerial Judgment

Whichever forecasting method you use, material judgment will play a big role. It’s rare that any
historical trend, ratio or relationship will simply continue unchanged into the future.
You’ll therefore have to modify markets - your belief will be important. In practice, making
personnel forecasts usually isn’t mechanical, even for major firms. It is sometimes difficult to
take a long-term perspective, particularly when market conditions change dramatically.
One may need to modify managerial judgment due to ;( will affect forecasting)
 Upgrade quality of products or services or services or enter into new on market. This will
have implications on quality of employees that you require.
 Are employees going to fit the new products you make
 Technological and administrative changes resulting in increased productivity which may
lead to reduced no. of employees.
 Financial resources available- pay more wages

3.1.2 Forecasting the supply of inside candidates

Knowing your staffing needs only satisfies half the staffing equation. Next, you have to estimate
the likely supply of both inside and outside candidates. Most firms start with the inside
candidates. Here the main task is determining which current employees might be qualified for
the projected openings. For this you need to know your current employees’ skills sets- their
current qualifications. Sometimes it’s obvious and managers to qualifications inventories. These
are manual or computerized records listing systematic listing of employees education, career and
development interests, languages, special skills and so on, to be used on selecting inside
candidates for promotion. The following devices are of importance when forecasting the supply
of inside candidates.
Manual systems and personnel replacement charts: Managers use several manual devices to
keep track of candidates for most important positions. A personnel inventory and development
record compiles qualifications information on each employee. Personal replacement charts are

35

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

another option, particularly for the firm’s top positions. They shoe the present performance and
promotability for each position’s potential replacement. As an alternative, you create a card for
each position, showing possible replacements as well as their present performance, promotion
potential and training.

Computerized information systems: Companies don’t generally track the qualifications of

hundreds or thousands of employees manually. Most firms computerize this information, using
various packaged software systems. In many of these systems, the employees and the HR
department enter information about the employee’s backgrounds, experience and skills often
using the company intranet. When a manger needs a person for a position, he/she describes the
position (for instance, in terms of education and skills). After scanning its database of possible
candidates, the system produces a list of qualified candidates.
Such computerized skill inventory might include:
Work experience codes: A list of work experience titles or codes describing the person’s job
within the company.
Product knowledge: The employee’s level of familiarity with the employer’s product line or
services
Industry experience: The persons industry experiences, since for some positions work in related
industries is very useful.
Formal education: Each postsecondary educational institution attended, filed of study, degree
granted and year granted
Training courses: Those taken or conducted by the employee, including courses taught by
outside firms
Foreign languages: Which languages; degree of proficiency, spoken and written.
Relocation limitations: The employee’s willingness to relocate and the locales he/ she would
prefer
Career interest: Work experience codes to indicate what the employee would like to be doing
for the employer in the future

Performance appraisals: Updated periodically, along with a summary of the employee’s

strengths and deficiencies.

36

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Skills: Skills such as “graphic designs inter face” (number of times performed, date last
performed, time, spent), as well as skill level, perhaps ranging from level 1 (can lead or instruct
others) to level 3 (has some experience: can assist experienced workers).

In practice the, the data elements could number 100 or more. For example, one vendor of a
package reportedly used by over 2,000 companies suggests 140 elements, ranging from home
address to driver’s license number, weight, salary, sick leave used, skills and veteran status.

3.1.3 Forecasting the supply of outside candidates

If you wont have enough inside candidates to fill the anticipated openings (or you want to go
outside for another reason), you need to focus on trying to anticipate the availability of outside
candidates. This may involve several activities. For example, you may want to consider general
economic conditions and the expected unemployment rate, usually, the lower the rate of
unemployment, the more difficult it will be recruit personnel. Information like this is easy to
find. Local labor market conditions are also important high tech.
Your plans may also require that you forecast the availability of potential job candidates in
specific occupations such as nurses, computer programmers for teachers. Some occupations are
in demand that they seem it remain in demand even when the economy slows. The jobs in high
de3mand aren’t necessarily always high tech.
To forecast for external candidates one will be guided by;
 General economic conditions- expected prevailing rate of unemployment. The lower the
rate of unemployment, the lower the labor hence the more difficult it will be recruits
personnel.
 Local market conditions
 Occupational market conditions- availability of potential job candidates in specific
occupations e.g. engines, computers experts for which u will be recruiting

3.2 Effective recruiting

Assuming the company authorizes you to fill a position, the next step is to develop an applicant
pool, using one or more of the recruitment sources described below. It is hard to over emphasize
the importance the importance of effective recruiting. The more applicants you have, the more

37

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

selective you can be in your hiring. If only two candidates apply for two openings, you may have
little choice but to hire them. But if 10 or 20 applicants appear, you can use techniques like
interviews and test to screen out all about all the best.
Effective recruiting is increasingly today, for several reasons. First the ease of recruiting tends to
ebb and flow with economic and unemployment levels. High average turnover rates for some
occupations are another problem; the increased emphasis on technology and therefore on skilled
human capital also demands more selective hiring and thus a bigger applicant pool
Finding the right inducements for attracting and hiring employees can be a problem. Aggressive
recruiting is therefo0re often the name of the game. “Poaching workers is fair game”. Some
recruiters even have their own jargon. They call luring workers away from other high- tech firms
“nerd rustling’.

The Recruiting Yield Pyramid

This is historical relationship leads and invitees, and interviews, interviews and offers made, and
accepted. Some employers use a recruiting yield pyramid number of new employees.
In the figure below (figure 3.1) the company knows the ratio of offers made to actual new hires I
2 to 1; about the people to whom it makes offers accept them. Similarly, the firm knows that the
ratio of candidates interviewed to offers is made is 3 to 2, while the ratio candidates invited for
interviews to candidates actually interviewed is about 4 to 3. Finally, the firm knows that of six
leads that come in from all its recruiting efforts, only one applicant typically gets an interview- a
6 to 1 ratio.
Given these ratios, the firm knows it must generate 1,200 leads to be able to invite 200 viable
candidates to its offices for interviews. The firm will then get to interview about 150 of those
invited and from these it will make 100 offers. Of those 1000 offers, about 50 will accept.

38

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

50 new hires

I00 offers made (2:1)

150 candidates
interviewed (3:2)

200 candidates
invited (4:3)

1,200 leads generated

(6:1)

Figure 3.1: Recruiting Yield Pyramid

Recruiting may bring to mind employment agencies and classified ads, but current employees are
the best source candidates.
Filling open positions with inside candidates has many benefits. First, there’s really no substitute
for knowing a candidate’s strengths and weakness. It is often therefore safer to promote
employees form within, since you’re likely to have a more accurate vies of the person’s skills
than you would an outsiders. Inside candidates may also be more committed to the company.
Morale may rise, to the extent that employees see promotions as rewards for loyalty and
competence. Inside candidates may also require less orientation and training than outsiders.

However hiring from within can also backfire. Employees who apply for jobs and don’t get them
may become disconnected telling unsuccessful applicants why they were rejected and what
remedial actions they might take to be more successful in the future is thus crucial.
Similarly, many employers require managers to post job openings and interview all inside
candidates. Yet the manger often knows ahead of time exactly whom he or she wants to hires.
Requiring the persons to interviews a stream of unsuspecting inside candidates can be a waste of

39

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

time for all concerned. Groups are sometimes not as satisfied when their new boss is appointed
from within their own ranks as when he or she is newcomer: it may be difficult for the insider to
shake off the reputation of being “one of the gang”
Inbreeding is another potential drawback. When all managers come up through the ranks, they
may have a tendency to maintain the status quo, when a new direction is required. Many
“promote from within”. Balancing the benefits to morale and loyalty with the possible inbreeding
problem can be a challenge.

3.3 Finding internal candidates

To be effective promotion from within requires using job position, personnel records and skills
banks. Job posting means publicizing the open job to employees (often by literally posting it on
bulletin boards or intranets) and listing the job’s attributes, like qualifications, supervisor, work
schedule and pay rate. Some union contracts require job posting to ensure union members get
first choice of new and better positions. Yet job posting can be a good practice even in non union
firms, it facilitates the transfer and promotion of qualified inside candidates. (However firms
often don’t post supervisory jobs; management often prefers to select supervisory candidates
based on things like supervisor’s recommendations and appraisals and testing results).
Personnel record share also important. An examination of personnel records (including
application forms) may reveal employees who are working in jobs below their educational or
skill levels. It may reveal persons who have potential for further training or who already have the
right background for the open job: Computerized records systems (like those discussed above)
can help ensure you consider qualified inside candidates for the opening. Some firms also
develop “skill banks” that lists current employees with specific skills. For example, if you need
an aero scope engineer in unit A and the skill bank show as person with those skills in unit B,
that person may be approached about transferring.

3.3.1 Hiring employees- the second time around

Until recently, many managers consider it unwise to hire former employees, such as those who’d
left voluntarily for better jobs. Quitting was often seen as a form of betrayal. Managers often
assumed that those they’d dismissed might exhibit disloyalty or a bad attitude if hired back.

40

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Today- thanks partly to high turnover in some high-tech occupations rehiring former employees
is back in style.
Rehiring back employees has its pros and cons. On the plus side, former employees are known
quantities (more or less) and are already familiar with the company’s culture, style and ways of
doing things. On the other hand employees who left for greener pastures back into better
positions may signal your current employees that the best way to get ahead is to leave the firm.
In any event, there are several ways to reduce the chance of adverse reactions. For example, once
rehired employees have been back on the job for a certain period, credit them with the benefits
such as vacation time and thereby on morale. In addition, inquire (before rehiring them) about
what they did during the layoff and how they feel about returning to the firm; you don’t want
someone coming back who feels they’ve been mistreated,” said one manager.

3.3.2 Succession planning

Forecasting the availability of inside executive candidates is particularly important in succession
planning- “the process of ensuring a suitable supply of successors for current and future senior or
key jobs”, arising from business strategy so that careers of individuals can be planned and
managed to optimize the organizations needs and the individual’s aspirations. To fill its most
important executive positions. Succession planning often involves a complicated series of steps.
Succession planning typically includes activities like these:
i. Determining the projected need for managers and professionals by company level,
function and skill
ii. Auditing current executive talent to project the likely future supply from internal sources
iii. Planning individual career paths based on objective estimates of future needs and
assessments of potential
iv. Career counseling in the context of the future needs of the firm, as well as those of the
individual
v. Accelerated promotions, with development targeted against the future need sof the
business
vi. Performance related training and development to prepare individuals for future roles as
well as currents responsibilities

41

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

vii. Planned strategic recruitment to fill short-term needs and to provide people to meet future
needs.
viii. Actually filling the positions- via recruiters, promotion from within and so on.

3.4 Outside sources of candidates

Firms can’t get all the employees they need from their current staff, and sometimes they just
don’t want to. We will look at the sources firms use to find outside candidates next
I .Advertising
Everyone is familiar with employment ads and most of us have probably responded to one or
more. To use help wanted ads successfully, employers have to address two issues; the advertising
media and the ad’s construction
2. The media
The selection of the best medium- be it the local paper, TV or the internet- depends on the
positions for which you’re recruiting. For example the local newspaper is usually the best source
for blue-collar help, clerical employees and lower level administrative employees. On the other
hand, if you are recruiting for blue-collar workers with special skills you would probably want to
advertise in the heart of the industry. The point is to target your ads where they’ll do the most
good. Most employers are also tapping the internet. For specialized employees you can advertise
in trade and professional journals.
3. Advertisements in professional publications like journals
4. Use of professional recruitment agencies e.g. manpower, Hawkins etc
5. Referrals and walk-ins/ word of mouth
6. Computerized employee databases

Constructing the ad
Construction of the ad is important. Experienced advertisers use a four point guide called
AIDA(attention, interest, desire, action) to construct ads. You must of course, attract attention to
the ad or readers may just miss or ignore it.
Develop interest in the job. You can create interest by the nature of the job itself, with lines such
as “you’ll thrive on challenging work” you can also use other aspects of the job, such as its
location to create interest.

42

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Create desire by spotting the job’s interest factors with words such as travel or challenge
Keep your target audience in mind
Finally make sure the prompts action with a at statement like “call today” or “write today for
more information”

Application forms
The filled application form provides information on education,
i. You can make judgments on substantive matters such as level of education experience
ii. Draw conclusions about the applicants previous progress and growth especially for
management candidates
iii. Draw tentative conclusions regarding the applicant’s stability based on previous work
records.
iv. Use the data in the application to predict which candidate will succeed on the job and
which will not
Using application forms to predict job performance
Some organizations use application forms to predict which candidate will be much useful in
much the same way that might use test for screening. They do this by conducting statistical
studies to find relationship between
i) Responses on the application form
ii) Measure s of success on the job

43

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Review Questions
i) Make a collection of several classified and display ads from any local
newspaper and analyze the effectiveness of these ads using the guidelines
discussed in this lesson.
ii) What are the main things you would do to recruit and retain a more diverse
workforce?
iii) You have been contracted by the Board of Directors of a newly established
private secondary school as a human resource consultant. Your first task is to
come up with a human resource plan detailing the human resource needs and
the process of meeting those needs. Explain the process you would use up with
this plan detailing how you would go about employment planning and
forecasting, and recruiting of candidates. Show how you would make use of the
recruiting yield pyramid.

Text Books for Further Reading

1. Flippo, E.B. (1984 ): Personnel Management (6 th Edition). NY, McGraw-Hill
2. Harriman, A. (1985): Women/ Men Management. NY, Praeger
3. Pell, A (1969): recruiting and selecting personnel. Ny, regents

44

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON FOUR

EMPLOYEE TESTING AND SELECTION

Lesson objectives
At the end of this lesson, you should be able to:
a) Describe the overall selection process
b) Explain what is meant by validity and reliability
c) List the main types of selection interviews
d) Explain and illustrates at least six factors that affect the usefulness of interviews

4.0: Introduction
One of the biggest challenges facing firms lies in the process of testing and selection of
employees. A firm that fails to lay emphasis on this process will find itself experiencing a high
employee turnover. The purpose of this lesson is to show you how to use various tools and
techniques to select the best candidates for the job.

4.1 Why careful selection is important

With a pool of applicants, the next step is to select the best candidates for the job. This usually
means whittling down the applicant pool by using the screening tools: tests assessment centers
and background and reference checks. Then the prospective supervisor can interview likely
candidates and decide who to hire.
Selecting the right employees is important for three main reasons. First, your own performance
always depends in part on your subordinates. Employees with the right skills and attributes will
do a better job for you and the company, employees without these skills or who are abrasive or
obstructionist wont perform effectively, and your own performance and the firm’s will suffer, the
time to screen out undesirables is before they are in the door not after.

45

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Second, it is important because it’s costly to recruit and hire employees. Third its important
because of the legal implications of incompetent hiring.

Negligent hiring
This is hiring workers with questionable backgrounds without proper safeguards. Negligent
hiring underscores the need to think through what the job’s human requirements really are.
Employers protect against negligent hiring claims by;
o Carefully scrutinizing all information supplied by the applicant on his or her employment
application. For example, look for unexplained gaps in employment
o getting the applicant’s written authorization for reference checks and carefully checking
references
o saving all records and information you obtain about the applicant
o rejecting applicants who make false statements of material facts or who have conviction
records for offences directly related and important to the job in question
o keeping in mind the need to balance the applicant’s privacy rights with others “need to
know”, especially when you discover damaging information
o Taking immediate disciplinary action if problems develop.

4.2 Basic Testing Concepts

Effective selection is therefore important and depends, to large degree on the basic testing
concepts of validity and reliability.
I .validity
A test is a sample of a person’s behavior, but some tests are more clearly representative of the
behavior being sampled that others. A typing test for example, clearly corresponds to an on-the-
job behavior. At the other extreme, there may be no apparent relationship between the items on
the test and the behavior. This is the case with projective tests.
Test validity
The accuracy with which a test, interview and so on measures what it purports to measure or
fulfills the function it was designed to fill. It answers the question, “does this test measure what
it’s supposed to measure?” with respect to employee selection tests, validity often refers to
evidence that the test is job related- in other words, that performance on the test is a valid

46

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

predictor of subsequent performance on their job. A selection test must be valid since, without
proof of validity, there is no logical or legally permissible reason to continue using it to screen
job applicants. In employment testing, there are two main ways to demonstrate a test’s validity:
criterion validity and content validity.
1. Criterion validity
Demonstrating criterion validity means that those who do well on the test also do well on the job
and that those who do poorly on the test do poorly on the job, thus the test has validity to extent
that the people with higher test scores perform better on the job. In psychological measurement,
predictor is the measurement (in this case, the test score) that you are trying to relate to a
criterion, like performance on the job. The term criterion validity reflects that terminology.
2. Content validity
A test that contains a fair sample of the tasks and skills actually needed for the job in question.
Employers demonstrate the content validity of a test by showing that the test constitutes a fair
sample of the content of the job. The basic procedure here is to identify job tasks and behaviors
that are critical to performance and then randomly detect a sample of those tasks and behaviors
to be tested.
Demonstrating content validity sounds easier than it is in practice. Demonstrating that;
i) The tasks the person performs on the test are really a comprehensive and random sample
of the tasks performed on the job.
ii) The conditions under which the person takes the test resemble the work situation, is not
always easy.
For many jobs, employers must demonstrate other evidence of a test’s validity- such as its
criterion validity.

11. Reliability
Is a test’s second important characteristic and refers to its consistency. It is “the consistency of
scores obtained by the same person when retested with the identical tests or with an equivalent
form of a test.” A test’s reliability is very important; if a person scored 90 on an intelligence test
on Monday and 130 when retested on Tuesday, you probably wouldn’t have much faith in the
test.

47

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

There are several ways to estimate consistency or reliability. You could administer the same test
to the same people at two different points in time, comparing their test scores at time 2 with their
scores at time 1; this would be a retest estimate. Or you could administer a test and then
administer what experts believe to be an equivalent test later; this would be an equivalent form
estimate.
A test’s internal consistency is another measure of its reliability. For example, suppose you have
10 items on a test of vocational interest; you believe this measure in various ways, the person’s
interest in working outdoors. You administer the test and then statistically analyze the degree to
which responses to these 10 items vary together. This would provide a measure of the internal
consistency is one reason you find apparently repetitive questions on some test questionnaires.

A number of things could cause a test to be unreliable. For example the questions may do a poor
job of sampling the material; or there might be errors due to changes in the testing conditions

4.3 Interviewing Candidates

An interview is a procedure designed to solicit information from a person’s oral responses to oral
inquiries; a selection interview, is a selection procedure designed to predict the future job
performance on the basis of applicants oral responses to oral inquiries. Interview is by far the
most widely used personnel selection procedure

4.3.1 Types of Interviews

Interviews can be classified in four ways according to;
1. Degree of structure
2. Purpose
3. Content
4. The way the interview is administered
Inn turn the seven main types of interviews used at work- structured, non-structured, situational,
sequential, panel, stress and appraisal can each be classified in one or more of these four ways.

I. The structure of the interview

48

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Interviews can be classified according to the degree to which they are structured. In an
unstructured or nondirective type of interview you ask questions as they come to mind the
interviewer pursues points of interest as they come up in response to questions. There is
generally no set format to follow and the interview can take various directions. While questions
can be specified in advance, they usually are not and there is seldom a formalized guide for
scoring the quality each answer. Interviewees for the same job thus may or may not be asked the
same or similar questions based on the candidate’s last statement and to pursue points of interest
as they develop.
The interview can also be structured. In the classical structured interview, the questions and
acceptable responses are specified in advance and the responses are rated for appropriateness of
content. It is an interview following a set sequence of questions. In practice, however not all
structured interviews go so as to specify acceptable answers.

Structured and no structured interviews each have their pros and cons. With structured interviews
all applicants are generally asked all questions by all interviewers that meet and structured
interviews are generally more valid. Structured interviews can also help interviewers who may
be less comfortable interviewing to ask questions and conduct useful interviews. On the hand,
structured interviews don’t always leave the flexibility to pursue points of interest as they
develop.

II .The Purpose of the Interview

Employee- related interviews can also be classified according to their purpose. Thus as noted
earlier, a selection interview is a type of interview designed to predict future job performance on
the basis of applicants oral responses to oral inquiries. A stress interview is a special type of
selection interview in which the applicant is made uncomfortable by a series of sometimes-rude
questions. The aim of the stress interview is supposedly to help identify sensitive applicants and
those with low or high stress tolerance.

In the typical stress interview, the applicant is made uncomfortable by being put on the defensive
by a series of frank and often-discourteous questions from the interviewer. The interviewer might
first probe for weaknesses in the applicant’s background, such as job that the applicant left under

49

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

questionable circumstances. Having identified these, the interviewer can yet focus on them
hoping to get the candidate to lose his or her composure. Thus a candidate for customer
relations’ manager who obligingly mentions having had four jobs in the pat two years might be
told that frequent irresponsible and immature behavior. If the applicant then responds with a
reasonable explanation of why the job changes were necessary, another topic might be pursued.
On the other hand, if the formerly tranquil applicant reacts explosively with anger and disbelief,
this might be taken as a symptom of low tolerance for stress
The stress approach can be a good way to identify hypersensitive applicants who might be
expected to overreact to mild criticism with anger and abuse. On the other hand, the stress
interview’s invasive and ethically questionable nature demands that the interviewers be skilled
on the requirements for the job. This is definitely not an approach for amateur interrogations or
for those without skill to keep the interview under control.

Interviews serve two more purposes in the employment context. An appraisal interview is a
discussions following a performance appraisal in which supervisor and employee discuss the
employee’s rating and possible remedial actions. When an employee leaves a firm for any
reason, exit interview is often conducted. An exit interview usually conducted by the HR
department, aims at eliciting information about the job or related matters that might give the
employer a better insight into what is right or wrong about the company.

III. The content of the interview

Interviews can also be classified according to the content of their questions.
A situational type of interview is one in which the questions focus on the individual’s ability to
project what his or her behavior would be a given situation. For example, a candidate for a
supervisor’s position may be how asked how he or she would respond to a subordinate coming to
work late three days in a row. The interview can be both structured and situational with
predetermined questions requiring the candidate to project what his or her behavior would be: in
a structured situational interview the applicant could be evaluated, say on his or her choice
between letting the subordinate off with a warming versus suspending the subordinate for one
week.

50

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Job-related interviews are those in which the intereviewer attempts to asses the applicant's past
behaviors for job-related information, but most questions are not considered situational. In other
words questions don't revolve around hypothetical situations or scenarios. Instead supposedly
job-related questions (such as „which courses did you like best in business school?“) are asked
in order to draw conclusions about say, the candidate's ability to handle the fanancial aspects of
the job to be filled.
The behavioral interview is gaining in popularity. In a behavioral interview a situation is
described and interviews are asked how they have behaved in the past in such a situation. Thus
while situational interviews ask interviewees to describe how they would react to a situation
today or tomorro, the behavioral interview asks interviewees to describe how they did react to
situations in the past.
Finally, psychological interviews are interviews conducted by a psychological in which
questionor panel s are intended to assess personal traits such as dependabibit. The interview may
use situational job-related or behavioral questions and be eithe structured or unstructed.
Psychological interviews generally have a significatly unstructured element.

4.3.2 Administering the interview

interviews can also be classified based on how they are administered: one-on-oneor by a panel of
interviewers; sequentially or all at once; and computerized or personally. For example, most
interviews are adiministered one-on-one. As the name implies, two people meet alone and one
interviews the other by seeking oral responses to oral inquiries. Most selection processes arae
sequential. In a sequentail interview the applicant is interviewed by several persons in seqeunce
before a selection decision is made. In an unstructured sequentail interviewer may look at the
applicant from his or her on point of view, ask different questions and form an indpendent
opinion of the candadite
on the other hand, in s structured sequential or serialized interview each interviewer rates the
candidate on a standard evaluation form and the ratings are compared befoer the hiring decision
is made. The panel inertview means the candidate is interviewed simultaneously by a grooup (or
panel) of interviewers (rather than sequentially). The group structure has several advantages. A
sequential interview often has candidates cover basically the same ground over and over again
with each interviewer. The panel interview, on the other hand, allows each interviewer to pick

51

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

up on the candidate's answers, much as reporters do in press conferences than are normally
produced by a series of one-on-one interviews. On the other hand, some candidates find panel
interviews more stressful and they may actually inhibit reponses. An even more stressful variant
is the mass interview. In a mass interview several candidates are interviewed simultaneously by
apanel. Here the panel poses a problem to be solved and then sits back and watches which
candidate takes the lead in formulating an answer.
Increasingly, interviews aren't administered by people at all but are computerized. A
computerized selection interview is one in which a job candidate's oral and/or computerized
responses are obtained in response to computerized oral, visual or written questions and/or
situations. The basic idea is generally to present the applicant with a sereies of questions
regarding his or her background, experience education, skills, knowledge and work attitudes-
specific questions taht relate to the job for which the person has applied. In a typical
computerized interview the questions arepresented in multi-choice format, one at a time and the
applicant is expected to respond to the questions on the computer screen by pressing a key
corresponding to his or her desired response. For example a sample interview question for a
person applying for a job as a store clerk might be:
How would your supervisor rate your customer service skills?
a. Outstanding
b. Above average
c. Average
d. Below average
e. Poor
Questions on a computerized interview like this come in rapid sequence and require concetration
on the applicant's part. The typical computerized interview then measures the response time to
each question. A delay in answering certain such as “can you be trusted?“ can flag a potential
problem.
Computer-aided interviews are generally used to reject totally unacceptable candidates and to
select those who will move on to a face-to-face interview.
Computer-aided interviews can be very advantageous. Systems like those on-line substantially
reduce the amount of time managers devote to interviewing what often turn out tobe
unacceptable candidates. Applicants are reportedly more honest with computers than they would

52

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

be with people, presumably because computers are not judgemental. The computer can also be
sneaky: if an applicant takes longer than average to answer a quetsion like, 'Have you ever been
caught stealing?“ he or she may be summarily screened out or at least questioned more deeply
in that area by a human interviewer. On the other hand, mechanial nature of computer-aided
interviews can leave applicants with the impression that the prospective emploeyer is rather
impersonal.
How useful are interviews?
The ironic about interviews is that while they're used by virtually all employers, the statistical
evidence regarding theri validity is actually very mixed. Much of the earlier research gave
selection interviews low marks in terms of reliability and validity. However recent studies
indicate that key to an interview's usefulness is the manner in which it is administered.
Specifiacally, the following conclusions are warranted based on one recnet study of interview
validity:
With respect to predicting job performance, situational interviews yield a higher mean
validity than do job-related (or behavioral) interviews, which in turn yield a higher mean
Validity than do psychological interviews. Structured interviews, regardless of content
are more valid than unstructured interviews are more valid than are panel interviews, in
which multiple interviewers provide ratingsin one setting.

In summary, structured situational interviews conducted one-to-one indidually seem to be the

most useful for predicting job performance. Unstructed interview in general, psychological
interviews and panel interviews are some what less useful for predicting job performance.

4.3.3 Interviewing and the law: employment Discrimination “ Testers“

an interview is a selection procedure; interviewers must therefore avodi asking questions
concerning, for instance, candidates marital status, childcare arrangements, ethnic
background and worker's compensation history. The increasing use of unemployment
discrimination testers has made such care even more important. Testers are individuals who
apply for employment, which they do not intend to accpet for the sole purpsoe of uncovering
unlawful discriminatory hiring practices.

53

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

4.3.4 Common Interviewing Mistakes

I. Snap Judgements
One of the most consistent findings in the interviewing literature is that interviewers tend to
jump to conclusions- make snap judgments about candidates during the few minutes of the
intervies, or even before the interview begins based on test scores or resume data. For example,
one study showed taht interviewers' access to candidates' test scores biased the interviewer's
assessment of the candidate. In another study the interviewer's evaluation of a candidate was
only related to his or her decision about hiring candidate for candidates with low passing scores
on a selection test. A great percentage of interviews make up their minds about candidates before
the interview begins on the basis of applicants' application forms and personal appearance.
Findings like this underscore that it's important for a candidate to start off on the right foot with
the interviewer. Interviewers usually make up their minds about candidates during the first few
minutes of the interview and prolonging the interview past this point usually adds little to change
their decisions.

II. Negative emphasis

Jumping to conclusion is especially troublesome when the information the interview has about
the candidate is negative. For example in one study the researchers found that interviewers who
previously received unfavorable reference letters about applicants gave the applicants less credit
for past successes and held them more personally responsible for past failures after the interview.
Furthermore the interviewer’s final decisions to accept or reject applicants based on the
references, quite aside from their interview performance. In other word impressions are much
more likely to change from favorable to unfavorable than from unfavorable to favorable. A
common interviewing mistake is to make the interview itself mostly a search for negative
information. In a sense, therefore, most interviews are probably loaded against the applicant. an
applicant who initially rated high could easily end up with allow rating, given applicant who is
initially rated high could easily end up with low rating, given the fact that unfavorable
information tends to carry more weight in an interview. An interviewee who starts out with a
poor rating will find it hard to overcome that first bad impression during the interview.

54

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

III. Poor knowledge of the job

Interviewers who don’t know precisely what the sort of candidate is best suited for it usually
make their decision based on incorrect stereotypes about what a good applicant is. They then
erroneously match interviewees with their incorrect stereotypes. On the other hand ,
interviewees who have a clear understanding of what the job entail hold interviews that are more
useful.

IV .Pressure to hire
Pressure to hire also undermines an interview’s usefulness .For example, a group of managers
was told to assume that they were behind in their recruiting quota .A second group was told that
were ahead of their quota. Those ``behind’’ evaluate recruits much more highly than did those
``ahead ‘’.

V. Candidate –Order [contrast] Error

It is an error of judgment on the part of the interviewer due one or more very good or very bad
candidate just before the interviewer in question .Mean that the order in which you see applicant
affects how you rate them.

VI. Influence of nonverbal behavior

Interviewers are also influenced by the applicant’s nonverbal behavior .For example, several
studies have showed that applicants who demonstrate greater amount of eye contact head
moving, smiling and other similar nonverbal behavior are rate higher .In fact these nonverbal
behaviors often account for more than 80% of the applicant’s rating.
An applicant’s attractiveness and gender also play a role. Researchers found out that whether
attractiveness was a help 0r a hindrance to job applicant depended on the sex of the applicant and
the nature of the job. Attractiveness was advantageous for male interviewees only when the job
was non-managerial.

VII. Telegraphing
Some interviewers are so anxious to fill a job that they help the applicant respond correctly to
their questions by telegraphing the expected answer .An example might be a question like

55

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

.``This job calls for Handling a lot of stress .You can do that ,can’t you?’’ the telegraphing isn’t
always so obvious .For example interviewer ‘ first impression of candidates [from examining
application blank and test scores ] tend to positively linked to use of a more positive interview
style and vocal on the part of the interviewer .This can translate into sending subtle cues [like a
smile ]regarding what answer is being sought .

VIII. Too much /Little Talking

Too much or little guidance on the interviewer’s part is anther common mistake. Some
interviewers let the applicant dominate the interview to the point where too few substantive
questions are pursed .At the other extreme some interviewers stifle the applicant by not giving
the person sufficient time to answer questions.

4.3.5 Designing and Conducting the Effective Interview

Designing and an effective interview can avoid problems like those addressed.
The Structured Interview
Since structure situation interviews are usually the most valid interviews for predicting job
performance , conducting an effective interview ideally stars with designing a structured
situation interview, a series of hypothetical job-oriental questions with predetermined answers
that are consistently asked of all applicant for a particular job .Usually a committee of person
familiar with the job develops situation and job-knowledge questions based on the actual job
duties .They then reach consensus on what are not acceptable answers to these question .The
actual procedure consist of five step as follows:
Step.1: Job Analysis: First, write a description of the job in the form of a list of a job duties,
require knowledge, skill, abilities and worker qualification.
Step 2: Evaluate the Job Duty Information.
Next, rate each duty no its importance to job success and on amount of time required to perform
it compared to other task .The aim here is to identify the main duties of the job.
Step .3: Develop Interview Questions. The employees, who list and evaluate the job duties, then
develop interview questions. The interview questions are based on the listing of job duties with
more questions generated for the more important duties.

56

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

A situational interview may actually contain situation; job –knowledge and ``willingness
‘questions [although the situation questions pose a hypothetical job situation tend to be the most
valid]. Situation question pose a hypothetical job situation ; such as ``job knowledge the job
.These often deal with technical aspects of a job .Willingness questions gauge the applicant ‘s
willingness and motivation to do repetitive physical work to travel , to relocate and so forth .
Step 4: Develop Benchmark Answer. Next develop answer and a five-point rating scale for each
question , with specific answer develop for good [a 5 rating ] ,marginal [a 3rating ] ,and poor [a
1rating ] .
STEP 5: Appoint Interview Panel and Implement .These types interviews are generally conduct
by panel, rather than sequentially. The panel should consist of three to six members, preferable
the same employees who participated in writing the interviews and answer. Panel member may
also be supervisors of the job to be filled, the job incumbent, peers and HR representatives .The
same interview member should be used to interview all candidates for the job.
Before the interview, the job duties, question and benchmark answer are distributed to the panel
members and reviewed Next the panel and to ask all questions of all applicants in this and
succeeding interviews to ensure consistency. However, all panel members record and rate the
applicant’s answer to each question falls relative to the ideal poor, marginal or good answers. At
the end of the interview, each applicant is directed to someone who will explain the follow-up
procedure and answer any question applicant has.

4.3.6 Guidelines for Conducting an Interview.

1. Plan the Interview
Being by reviewing the candidate’s application and not any areas that vague or that may
indicate strengths or weakness .Review the job specification and plan to start the interview with
a clear picture of the traits of an ideal candidate . If possible use a structure form. Interviews
based on structured guides, usually result in the best interviews .At a minimum, you should write
out your question prior to the interview. The interview should take place in a private room where
telephone calls are not accepted and interruptions can be minimized. Also plant to delay your
decisions. Interviewers often make snap judgment even before they see the candidate on the
basic of his or applicant form, for instance- or during the first few minutes of the interview.
Make your decision them.

57

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

2. Establish Rapport
The main reason for the interview is to find out about the applicant: To do this start by putting
the person at ease. Greet the candidates and start the interview by asking a non-controversial
question –perhaps about the weather or traffic condition that day. As a rule, all applicant, even
unsolicited drop-ins-should receive friendly courteous treatment, not only on humanitarian
grounds but also because your reputation is on the line. Be aware of the applicant’s status .For
example, if you are interviewing someone who is unemployed he or she may be exceptionally
nervous and you may want to take additional step to relax the person.
3. Ask Questions
Try to follow your structure interview guide or the question you wrote out ahead of time .A
menu of question to choose from. Avoid questions that can be answered ``yes’’ or ``no’’ , don’t
put word in the applicant’s mouth or telegraph the desire answer ,for instance , by nodding or
smiling when the right answer is given ,don’t interrogate the applicant as if the person is a
criminal and don’t be patronizing , sarcastic or inattentive , don’t monopolize the interview by
rambling nor lat the applicant’s opinions and feelings by repeating the person’s last comment as
a question .
When you ask for general statements of a candidate’s accomplishment, also ask for examples.
Thus if at the end candidate lists specific strengths or weakness, follow up with ``what are the
specific examples that demonstrate each of your strengths?’’
4. Close the interview
Toward the close of the interview, leave time to answer any questions the candidate may have
and if appropriate, to advocate your firm to the candidate. Try to end all inetrviews on a positive
note. The applicnat should be told whether there is an interest and if so, what the next step will
be. Similarly, rejections should be made diplomatically for instance, with a statement like,
''although your baackground is impressive, there are other candidates whose experience is closer
top our requirements.'' If the applicant is still being considered but a decision cant be reached at
once, say this. If oyur policy is to inform candidates of theri staus in writing, do so within a few
days of the interview.
5. Review the interview
After the candidates leaves, review your interview notes, fill in the structured interview guide
and review the interviewwhile it's fresh in your mind.

58

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Remember that snap judgments and negative emphasis are two common interviewing mistakes;
reviewing the interview shortly after the candidate has left can help you minimize these two
problems.

Review Questions
i) Explain reliability and validity. What is the difference between them?
ii) In what respect are they similar?
iii) Explain and illustrate the basic ways in which you can classify selection
interviews.
iv) Briefly describe each of the following possible types of interviews: unstructured
panel interviews; structured sequential interviews; job related structured
interviews
v) Briefly discuss and give examples of at least five common interviewing mistakes.
vi) What recommendations would you give for avoiding these mistakes?

Text Books for Further reading

1. Dessler, G. (2002): Human Resource Management (9th Edition ).NJ,Prentice Hall
2. Flippo,E.B. (1984): Personnel management (6th edition ). Ny, Mcgraw hill
3. Harriman, A. (1985): Women/ men Management, NY, Praeger
4. Dessler, G. (2002): Human Resource Management (9th Edition).NJ, Prentice Hall

59

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON FIVE

PERFORMANCE APPRAISAL AND MANAGEMENT

Lesson objectives
Upon completing this lesson, the student should be able to:
a) Define the concepts of performance management and appraisal and recognize how
this can be applied in an organization.
b) Describe the steps in developing a performance management program and understand
its impact on the behavior of individuals in an organization.
c) Understand the process and skills involved in an effective performance appraisal
interview.
d) Identify and describe the major types of rating errors likely to be encountered in the
appraisal process.

5.0 Introduction
One of the most important activities of an HR is maintaing and enhancing the workforce.after all
the effort and cost involved in the recruiting and selection process, it is important to develop
employees so that they are using their fullest capabilities, thus improving the effectiveness of the
organiztion. Performance management is the ongoing process of evaluating and improving
employee performance. Therefore, it is important that the organization develop procedures and
policies, which comply with process.
The development of standard performance appraisal process will help companies to improve
their bottom-line perfomance, uplift motivational efforts, and resolve most moral problems.
The purpose of this lesson is to provide an understanding of this stagae of the sucess system
model: a description of the performance management and appraisal process. This includes the
major appraisal techniques, discussing various rating methods, and identifying several
performance evaluation problems. Perfomance management is key factor in enhancing the
development of the organiztion's employees.

60

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

5.1 Performance management

The performance managaement system should provide benefits to both the employee and to the
organization. For the individual, the appraisal should provide a management information system
for making management decision as well as a toll for improving performance. Today's
organization can no longer afford to live with an ineffective appraisal system.
Practically all managers and many employees dislike the experience of perofrmance appraisals.
However, the pulses far outnumber the minuses with many good reasons for formally appraising
performance. The appraisal is a more factual presentation to demonstratae an employee is failing
within the functioning of a group or document. On the positive side, appraisals will also provide
valuable inssights as to the future direction the department or work gorup will take.
Performance may be defined as the accomplishment of an employee or manager's assigned duties
and the outcomes produced on a specific job function or actitivity during a specified time period.
Performance appraisal, review or evaluation refers to s systematic description and review of an
inndividual's job performance. Performance management refers to the total system of gathering
information, the review and feedback to the individual, and storing inforamation to imporve
organization effectiveness. The primary goal of performance management appraisals is to
improve organization performance. The appraisal are used for a variety of purposes, including
the following:
1. compesation one of the most common uses of performance managemnt concerns
compensation determing pay increases, bonuses and other pay related issues
2. performance improvement an example of this is where companies use appraisal systems
which link performance improvement with pay. An effective appraisal system
performance is nessecary for thses incentive systems to work.
3. Interla appraisal Perfomance appraisal information is also used in performance decisions,
to determine promotions, transfers, or in the case of downsizing, do identify possible
layoffs. Most organizations rely on performanace appraisal information in decideng
which employees to promote to fill openings and which employees to retain in a
downsizing situation.
One problem with relying too heavily on performance appraisal information in making
decisions about promotions is the the employee's performance concerns only his or her

61

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

current job if the promotion involves different skills from the employee's current job, it is
often impossible to predict how the individual will perform at the new level.
4. Evaluation performance appraisal information may also be used to evaluate the
effectiveness of the recruitment process, to validate selection criteria or other predictors
of job perfomance. In these cases, the HR manger on-the- job perfomance appraisal so
that the test scores or selection ratings can be correlated to job performance
5. Internet feedback This is a feedback system where employees send feedback to assist
managers in assessing their leadreship skills. The system is user friendly and is seen by
employees as worthwhile. The system feedback not only assesses manager's team
leadership skills, but also helps them develop those skills. The advantagaes of the system
include the reduction of paperwork, reducing employee's times, and maintaining
employees anonymity while providing prompt feedback. The result is informative
feedback that promotes leadership development.
6. Development tool Performance apparaisal may also be used as a development tool for the
individual employee, providing an opprtunity for feedback, recognition, and reinforce
ment.

This performance reveiw also provides employees with career goals and direction for future
performance
The appraisal allows the organizationto select those best qualified for promotion suggest areas
where training may be effective, and help improve individual performance, resulting in improved
bottom-line productivity. From the individual's viewpoint, performance appraisals should
provide recogntion of one's contributions; a feeling of support from one's immediate supervisor
and the feeling of security from knowing one is performing satisfactory.
When giving feedback to an employee in an appraisal, the interview should have the necessary
information to make the evaluation of job perfomance and present a summation of that
information. At this point the feedback session should trun to a discussion of developing
strengths, thus shifting into a counsellling session. It is suggested that supervisors keep a file on
each worker, noting significance accomplishments or setbacks and appraisals as an ongoing
process.

62

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

5.2 The performance appraisal review process

the performance appraisal review process provides a critical element in the development of
organization's most valuable resource: its employees
1. idenntifying performance standards The appraisal attemepts to identify the key skills,
behaviours, results and output be reviewed, usually form job analysis data. Performance
standards specify what is to be accomplished, and some measuer of how well it is being
accomplished, and some measure of how well it is being accomplished. The more the
performance standards are communicated to employees, the moere accurate and fair the
review process. In general, the greater the specificity of the standards, the more effective
the systems
2. the appraisers The appraisal is usally performed by one's immediate supervisor. The
rationale is that this individual ha sthe most opportunity to observe the employee, should
have abetter understanding of the job being performed and is motivated to optimize the
employees performance appraisal because the supervisor's future is directly linked to the
organizational units's profitability.
The immediate supervisors should utilize to minimizeeee any appearance of giving
critism. This can be accomplished by focusing on results rather individual personality.
One shold ba aware how voicetone can change a person's interpretation of what is being
said. The supervisor shold regard the employee as a teammate and involve the person in
the process. The future shold be stressed that the past. The emphasis should be on the
positive benefits to be attained by adapting the suggested adjustments. At the same time,
it shold be pointed out if the adjustments are not made, there will be consequences.
3. Self appraisal Other performancesources include surbodiante self-appraisals that are
completed prior to thereview session and then used as the agenda for tha session. The
effectiveness of self appraisals depends upon a trusting relationship between superior and
surdbodinate. Also, not to be overlooked is the surbodinate's expectation of one's peer
group as to their honesty and acccuracy in their own self-apprasal
4. Peer appraisl/multiple appraisal Many organizations are finding that multiple raters add
to the effectiveness of appraisal system. Ratings collected from several sources tend to be
more accurate and have fewer biases. Still another form is peer appraisal, hwre one's
follow workers rate each other. Again, trust must pervail, along with accurate and

63

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

frequent observation of each other's work behavoir. Often peers (or customers )have
better knowledge have bettr knowledge of certain aspects of the employee's work
performance.
This metjhod often places greater emphasis on team performance and team rewards
5. Surbodinate rating Yet another form is the reverse procedure of surbodinate evaluating
superiors. This may be placing an unfair burden upon the surbodinates who, on top of
being expected to perform their jobs satisfactoryily, now are placed undere the additional
stress of evaluating the person who will soon be evaluating them. Also, this assumes the
surbodinates criteria is similar to the goals and objectives of the oragnization. Many
organizations use self, surbodinate, peer and supervisor ratings as a comprehensive
appraisal. Although these sources of evaluation are innovative and thought provoking,
they are not generally accepted in most oraganizations

5.3 Performance Appraisal methods

the appraisal methods that appear to be in more general use include rating scales, ranking,
checklists, forced distribution, paired compariosn, essay, critical incidents, and management by
objectives. The number of perfomance appraisal methods listed is an indication of the
importance placed on the process by the management. Another factor is test validity.

5.3.1 Types wof validity

A test is said to be valid for selection purpose if there is a significant relationship between
perfomance on the test and performance on the job. The better a test can distinguish between
performance on the test and performance on the job, and the better a test can distinguish between
satsfactory and unsatisfactory performance of the job, the greater its validity. Aplicants' scores
on valid tests can be used to predict their probable job preformance.
The for basic types of validity are
1) Predictive validity
2) Concurrent validty
3) Content validity
4) Construct validity

64

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Each type is discussed as it relates to appraisal

1) Predictive validity: This method of validating employment practices is calculated by
giving a test and comparing the ste results with the job prformance of those tested.
There are several problems with using predictive validity, even though it is considered
sound in a statistical sense. For example, a relatively large number of number of people
have to be hired at once, and the test score scannot be considered. Obviously, the firm
may intially hire both good and bad employees. Because of these and other problems,
another type of validity is often used- concurrent validity.
2) Concurrent validity: Concurrent essentially means ''at the same time''. Using concurrnet
validity, current employees (instaed of those newly hired) are used to validate the test.
The test is given to current employees, and then the scores are correlated with their
performance ratings. A highcoreelation suggests that the test is able to differentiate
between the better and the poorer employees.
3) Content validity: This type of validity uses a logical and less statistical approach. In
content validity a person would perform a test which is an actual sample of the work
done on the job. thus, an arithmetic test for a cashier would contain some of the
calculations that a cashier would have on job. content validity is especially useful if th
workforce is not lareg enough to accommodate bettre statistical designs.
4) Construct validity: This type of validity is more difficult to deal with than than the
others. In practice, construct validity describes some maesure (such as a scale or index) of
a variable that correlates with measures of other variables. These variables should agree
with a theory as to how they related.
5.3.2 Rating Scales
Rating scales usually include graphic, weighted, and behaviorally anchored criteria. The graphic
rating scale is the simplest and most commonly used. Alist of performance variavbles is
determined for the particular job such as attendance, production, and cooperation. For each
perfomance variable, there is a listing of levels of performance ranging from exceptional to
below normal.The individual merely circles the performance level that is believed to have been
achieved. Scoring is done by simply adding the number values assigned to each performance
level, from exceptional to below normal.
i. The graphic rating

65

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

The graphic rating scale is the same as the graphic rating scale, with the exception
that the performance variables receive different weights depending upon their
importance in performing the job.The rating procedures is the same except that each
variable has a box in which the rate indicates with a 1,2,3 and so on, the relevant
importance of that variable.scoring is achieved by multiplying these numbers times
the value of the performance levels ranging from exceptional to below normal. How
ever , the weighted graphic rating scale, although emphasizing the more important
performance variables,suffers the same problems as the graphic rating scale.Rater
subjectively is still present, as is the tendencz to overrate present behaviour and
group people within a narrow range.
ii. Behavioral anchored rating scale BARS
A more sophisticated form of rating is the Behavioral Anchored Rating Scales,
commonly referred to as BARS.BARS are graphic scales with the performance
variables anchored in description of actual job bahavior. For instance, BARS for a
wage and salary administrator might range from“ maintains a current database „ to
„fails to coordinate with appropriate committees.“BARS are constructed for each
individual job category, and not for individual positons within these categories. The
results are BARS that are broadly descriptive to cover the positions within job
categories. The reasons for this are that constructing BARS is very timeconsuming
,very costly and very often needs to be updated .it is often not practical to do this first
for each individual position .BARS appear to provide a workable system. It also has
the advantage of using job categories which are closerly reviwed from performance
content. The anchors are job descriptiveand should promote rate accurancy.
iii. 360 Degree or Multirater
This process allows employees to receive constructive and accurate rating
feedback.The rating information is gathered from a questionnaire with approximetly
100 items to otain ratings.The questionnaire is usually completed by a work group of
around ten people. This work group includes the person being rated, ther boss,
several peers, and subordinates.
iv. Ranking

66

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Another apraisal method is ranking.indivuals are evaluated from best to worst on

some single performance criteria.This procedure may be changed by alternative
ranking the best and worst, followed by the second best and second worst , until all
individuals have been ranked.The result is rather simplistic evaluation that may be
difficult to defend especially to defend as one reaches the middle of the group, when
the best and worst designation differences may be extremely difficult to decide.
v. Paired Comparison
Paired comparisons require the rater to compare pairs of rates on performances which
two individuals are compared at a time to determine which one is the better
employee. Then, another two names are compared until every individual has been
paired with every other individual. The final winning score would better individual
having been chosen over the others.
The paired comparison method is simple, but cumbersome to use. However when the
number of employees to be ranked reaches 20,there would be 190 comparisons the
result of which would dilute ones ability to make distinctions yet, This method does
seem to reduce the central tendency, leniency strictness and halo errors.
vi. Behavioral Checklist
Checklist appraisal are another appraisal method and are either basic,weighted or
forced choice.The basic checklist development follows a procedure similar to BARS,
in that a job analzsis must be performed to come up with a job description. Then,
several performances categories are indicated from which a wide range of favourable
and unfavourable bahaviours are created. These are then randomly assigned to the
cheklist representing an accurate statement of favourable and favourable job
performance.Randomness keeps the evaluator alert, because each behaviour must be
carefully read and helps control tendency
Although checklists are easy to use and score, they are timeconsuming and costly to
construct.Such checklists tend to be abroad and to make them more job specific
increases the cost.Also , basic checklists assign equal weight to each item ,ignoring
any contribution diferences of performance variables. However , the weighted
checklist overcomes this problem.

67

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

The procedure to determine weighting of the checklist is quite simple.A list of

performance variables is drawn up, and knowlledge persons assign varying weights
depending upon their judgements as to the relative value of each variable for job
performance. At times, organization policies, such as concern for safety , wil be
reflected in higher weights.
vii. Forced choice
The forced choice appraisal techniques are rating method that requires the rater to
makechoices among descriptive sentences. The forced choice checklists is a time
consuming method becauseit requires the development of a set of sentences ranging
from the high level of performance for variables such effort ,to the lowest level of
acceptance performance.If an accurate set of sentences is developed, then the result
maz be a reduction of rater error, particularly central tendecy .One technique often
used to keep the raters alert is using a combination of positive and negative sentences
for each job variable.Raters are not given the screening format , so they unable to
intentionally give high or low ratings.
viii. Forced Distribution
Another method of appraisal is forced distribution, which presents the rater with a
limited number of categories and require and require a designate portion of ratees for
each category. This technique is relativerly simple and inexpensive. Employees are
divided into set categories, such, as the highest rated individuals for a particular
variable quality,attendance, etc. This highest category must include 5 percent of all
the employees being rated, the above average category must include the next 15
percent, the average category must include next 60 percent, and so on.
One problem with forced distribution is that the group being evaluated may exceed or
not meet the designated percentage category, thereby diluting the validity of the
category.
As with other forced techniques ,rater errors such as central tendency and to be
reduced; however the forced distribution maz cause ill feelings among raters and
ratees because the method is so objective.

68

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Implementing performance management

A business may have the latest performance management systems, but it will fail unless it is
implemented or put into action correctly. Front line supervisors may not understand the goal of
the system and are confused by the objectives .Is the aim of the system to help employees meet
the companys expectations which will further their job security , Or is the system designed to
have a record that will inhibit employees from suing the company
Actually, performance management is a mixture of both. It is not one or the other. The following
suggests some aspects of implementing a performance management system.

Setting Expectations. Employers must provide employees with clear instructions of what the
company expects of them.It would be unfair not to do this and then terminate employees.Not
only is it unfair, in adversaral proceedings (courts, arbitrators, or commissions one of the first
questions asked is“..... did the employees fail to meet in terms of conduct, performance, or
behaviour“ Employers who reply the employee should have known will usually receive the
reply“,You should have told them.“ Big trouble!
Notification of Not Making the Grade. An employee discharged is unfair if the employee has not
been told previously that ones job is on the line.This notifies employees they are not making the
grades so they can make the suggested changes to preserve their job.
When employees know their records reflect their shortcomings, thez are less likelz to sue, which
would place their personal records into the public record.
Nonpunitive discipline. Many supervisors are reluctant to punish their children, let alone adulit
employees. Most will not use discipline,even if the employer requires it. Nonpunitive discipline
can be used and many believe it generates more effective results . Employers have the right to
be treated like adults and shouldand should be counseled on their job shortcomings in a direct
and nonpunitive manner.

Deficiences, Not causes. When employers try to address the real cause of a workplace problem
such as emotional , medical ,or personal, there is a real risk of lawsuits.The reason is when you
do so you are actually considering the employee as having a disabling condition which is agaisnt
the law. Focus only on what takes place at the workplace. Do not inquire nor spectaculates as to
what may be the“ real“

69

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Avoid Intent. When employees do not meet the company expectations, it does not mean they
are bad and do not care. Stay out of the trap of analyzing the employees thoughts. you cannot
prove an employee doenst care, but you can prove missed deadlines and defective work. If you
focus on subjective intent, you allow the employee to divert attention away from the real issue
of objectives deficient work behaviour.

Avoid Delay.If one must discipline employees ,do not delay. The longer time elapses, the more
rigid our view of the employee becomes. Employees should have a chance to improve, not be
judged prematurely. By acting quickly, you reduce the possibility the employee will raise
protected complaint such as harassment or disability.
Other aspects of implementing performance management , which requires attention, is providing
employees the opportunity to defend themselves. There are usually two side to every work
incident.Employees should have a reasonable opportunity to improve. Any discipline should be
progressive with reasonable time between each stop.The business should make good use of the
introductry periods of 30 to 90 days at the beginning of employment to document employees
work problems. If the new employees will not work out, now is the time for discharge.It is only
fair to the particular employees so they can invest their time and effort in a more suitable job.All
disharges should be the some for similar situtions. Double standards and favoritism will cause
legal problems later as comparisons are made. Always provide an appeals procedure such as per
review because although companies try to be fair , errors will occur.

5.4 Performance Appraisal Problems

Performance appraisals and merit rating plans sometimes fail.When this does occur,there are
several possible explanations or problem areas.Sometimes these plans not only attempt to
motivate individuals to increase effectiveness, but also direct link pay raises and promotions.
When this takes place during the evaluation feedback session,employees are more interested in
the final result: that is, will they receive increased pay or a promotion , The result is the ratee
often pays little attention to the feedback portion of the session.
The feedback session should not include any pay rise or promotion decisions if future employee
motivation is one of the expected outcomes. Pay raises and promotion should be discussed at
later sessions.

70

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

In a feedback session using employee self ratings of their performance,there may be problems
with the surpervisors rating differing. Such issues go beyond just the differences in overall
ratings and require additional discussion. On cause of appraisal maz be the lack of top
management support. The result is that both the rater realize little will result from the evalution
process so they merely go through the motions,often wasting valuable time and energy. It is only
when management supports appraisal and makes it known to the later that their future with the
company depends upon their effectiveness in evaluating ratees, will there be appropriate results.
This also applies to the ratees because they must be convinced their evaluations will eventually
decide future career opportunities, pay raises, and possible promotions.
When the company is unionized, the major cause of evaluation problems is sing seniority as the
basis for pay increases, promotions, and other work related issues such as vacations, shift
preferences, and overtime.Although this is a contractual procedure, subject to negotiations, the
company often does have other choices.
For instance, the company wuold prefer to keep the seniority unit as small as possible, permitting
the seniority restriction to apply to the smallest number of people and thus allowing greater
company discretion in appraisal. Of course, the union desires larger seniority units, because it
hopes to maximize the number of people to who the seniority rule applies.For example, in a
layoff situation, the seniority person would bump the least senior person.When units are small
the effects of seniority are often minimized. Other approaches to the seniority issues would split
merit and senoirity system, with extra, performance points given for years of service. Also,when
merit measures favor a nonseniority person over a seniority person, a joint management union
commitee could resolve the issue.The seniority issue aside performance management appraisal
plans will continue to be major factor in determining pay increase, promotions, and rentention in
business organizations.

5.5 The appraisal interview

Teh appraisal inetrview givesa manager the opportunity to discuss a surbodinate's performance
record and toexplore areas of possible improvement and growth. It also provides an opportunity
to identify the surbodiante's attitudes feelings more thoroughly and thus to improve
communication. Usually the appraisals are conducted once or twice peer year. In smaller
organizations, appraisals may be few and far between, but they are important.

71

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

The format for the appraisal interview will be determined in large part by the purpose of the
interview, th type of appraisal system used, and the organization of the interview form. Most
appraisal interviews attempt to give feed back to employees on how well they are performing
theri jobs, and to make plns for their future development. Interviews should be scheduled far
enough in advance to allow the interviewee, as well as the interviwer, to prepare for the
discussion.
Areas of emphasis
A major purpose of the appraisal interview is to make plans for improvement; however, itis
important to focus the interview's attention on the future rather than the past. The interviewer
should observe the following points:
i) Emphasize strengths on which the employee can build rather thna weaknesses to
overcome
ii) Avoid suggestions about the personal traits to change; instead suggest more
acceptable ways of performing.
iii) Concentrate on opportunities for growth that exist within the framework of the
employee's present position.
iv) Limit plans for growth to a few important items that can be accoplished within a
reasonable period of time.
Although fairness issue is a major concern in all the working areas of HRM, it is very important
in the appraisal interview. The principles of justice for the basis for HRM practices in hiring,
performance appraisal and rewards. Thereis ample evidence that fairness increases the company's
employee loyalty. The result is satisfied, committed employees who are willing to demonstrate
extra job effort. This leads to positive employee job behaviors even if they are relate only to job
description, performance appraisals, or reward programs.
The appraisal interview is perphaps themot important part of the entire performance appraisal
process. Unfortunately, the interviewer can become overburden by attempting to discuss too
much as the employee's past performance and future development goals. Dividing the appraisal
interview into sessions, one of for the time pressures. Moreover, by separating the interview into
two sessions, the interviewer can give each session alos may imporve communication between
tha parties, thereby reducing stress. A good , supporting feedback interview can result in graeter
employee satisfaction with the appraisal interview.

72

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Another source of ineffective performance is the normally happy employer who suddenly
demonstrates negative behavoir. Over a period of several weeks their behavior becomes
aggressive and threatening. It could be cause be by medical condition, such as depression, or
because the employee has stopped taking prescribed medication. Whatever is causing the
behavior cchange must be unique to that person, although some people are mnaturally
antagonistic or withdrawn. An important consideration is the disturbed employee may cause
valuable employees to transfer or leave the company.
Ineffective behavior maybe caused by the work environmant. The competitive worl oof work
with its budget cuts, restructuring and high tech advance are extending the reach of the
workplace, overloading many employees. Employees begin to burn out when the negative
pressure, conflicts and demands increasingly outweigh the positive of personnal
acknowlegdement, and sucesses. Exhausted workers report lower job satsfaction, lower
commitment and higher job turnover.
Bcause highly motivated and commited employes are apt to burn out the company is losing its
best people. Companies must incraese their acknowledgement and show appreciation to
employees doing a good job. these rewards should be distributed fairly to employees because an
unfair alocation increases negativism.

5.6 Improving perfomance

In many instances, the appraisal interview will provide the basis for noting deficiences in
employee performance and for making plans for improvement. Unlss these deficiencies are
brought to the employees attention, they are likey to continue until they become quite serious.
Sometimes, under performers may not understand exactly what is expected of them. However,
once their responsibilities are clarified, they are in a position too make the corrective action
needed to improve their perormance.
Source of ineffective performance
There are many reasons why an employee's performance might not meet standards. First each
individual has a unique pattern of strengths and waekness that play a part in addition,other
factors sush as the work environ ment the external enviroment including home and commonly
and personal problems have an impact on a job performance
It is recommended that the appraisal of ineffective performance focus on three interactive
elements; skill effort and external conditions for example if an employee performance is not up

73

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

to standards, the cause could be skill problem (knowledge, abilities technical competencies,) an
effort problem(motivation to get the job), or some problems in the external conditions of work
(poor woking conditions, supluyshortages, difficult sales territories). If any one of thesse there
elements re unfavouravble, performance will usually suffer

5.7 Improving ineffective performance

The fisrt step im improving ineffective performanceis to determine its cause once the cause is
known, a cousre of action can be planned. This action may include providing training or
improving the skills needed for effective member of the organization. In othr situations, graeter
attention may have to be focussed on incentives to motivate the employees.
If effective performance persists, it may be necessary to demote the employee take displinary
action,or discharge the perosn fromthe orgaanization. Whatevr action is taken, it should be done
within legal limits, with fairness and with recognition of the feelings of individual involved.
This required a formal approach to a progressive displine program. The most appropriate match
of discipline to a specific offenses should be gorverned by the severity of ofense, employee's past
performance record, lenght of time employed, and past penalties for similar offense.
Appropriateness of displine usually begins with the first step being a verbal warning, the second
a written warning and third a final written indicating the displinary action

Optimal perfomance
The performance management process is designed t assits employees to developtheir full
potentail ; that is to obtain their sucessful performance in the work environment. With the
flattening of the company structure and the emphasis on quick response, more work is being
done in task force and project teams. Employees are placed in teams with memberes of varying
skills and must move quickly to complete their assignments before moving on to a new team and
new project. The management consult beelieves tihs recruiting redeployment of employees is not
being accomplished in an efficent manner. They may be misassigned or mismatched.the situation
may also be inappropriate for the employee to achive optimal performance

74

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

What is optimal performance? This occurs when employees produce outstanding or optimal
results for this take place, the employee must be selected to perform in a particular work
environment requiring that persons unique talents, which lead to their high performance pattern.
Outstanding personall sucess is not random, accidental, or lucky. An employee does certain
things when sucessful which are different when not sucessful; the person is in their high
performance pattern. Each person has high performance pattern which is unique to the person.
No two people have the smae high performance pattern for succesful performances to achiev
perfromance, there must be a cerful people match between the job assignments and adjustments
in how work is assnged to capitalize on the unique sucess patterns of the team mebers. Some
companies have treid this approach and were highly sucessful. From the perspective of
performance management, very performance review would become an original appraisal. This
would appear to require a rethinking of performance management process

Review Questions
i) Contrast and compare the difference between performance appraisal technique .
ii) Which technique would you prefer for an educational institution e.g school.
iii) How would you define ‘’performance management’’.
iv) Present and discuss examples of how performance appraisal techniques are
used in educational settings.
v) Do you feel school administrators should receive training in concluding
performances evaluations? Why or why not?
vi) Discuss and explain the basic problems that can arise in performance appraisal
vii) How frequently should performance appraisal take place?

75

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Text Books for Further reading

1. Dessler, G. (2002): Human Resource Management (9th Edition ).NJ,Prentice Hall
2. Flippo,E.B. (1984): Personnel management (6th edition ). Ny, Mcgraw hill
3. Harriman, A. (1985): Women/ Men Management. NY, Praeger
4. Pell, A (1969): recruiting and selecting personnel. Ny, regents

76

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON SIX

TRAINING AND DEVELOPING HUMAN POTENTIAL

Lesson Objectives
At the end of this lesson, the student should be able to:
a) Define the concept and major purpose of training in an organization.
b) Describe the steps in developing and implementing an effective orientation and
training program.
c) Understand the uses of a systems approach to training in an organization.
d) Identify and describe the major types of training methods and techniques.

6.0Introduction
After the employee has been recruited, selected and inducted, he or she must next be developed
to better fit the job and the organization. No one is perfect fit at the time of hiring, and some
training and education must take place. No organization has a choice of whether to develop
employees or not; the only choice is that of method. If no organized program exists, then
development will largely be self- development while learning on the job.
Development would include both the training to increase skill in performing a specific job and
education to increase general knowledge and understanding of our total environment.
In the future, the only winning companies will be those that quickly to changing conditions,
increasing workforce diversity, and the critical issue of training- related problems. Preparing
employees to function in high performing system is an important HR activity and is the focus of
this lesson. The modern HR manager must not only be flexible and adaptive in changing
environment but must also be able to develop a system approach to training. Rapidly changing
technology necessitates employees who have the skills, abilities and knowledge to keep up with
new complex production and techniques.

77

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Training is a process that begins with the orientation of the new employee and continues
throughout an employees’ career. Therefore, it is important that the HR manager develop labor
force.
Training is critical because it provides the skills needed both now and in the future. The
underlying assumption is; if an individual employee becomes more productive and more
involved, the total organization will also be improved. An overlooked benefit of training is when
it is a continuing process rather than occasional. It has been found that when companies train
their employees continually, not as a high level of performance, but it also helps to eliminate a
negative work place.

6.1 Training
Training may be defined as an attempt to improve performance by the attainment of specific
skills such as typing, welding, running a computer and so forth, to do the current job the goal of
training is to ensure that a number of job skills will be performed at prescribed quality levels by
trained employees.
6.1.2 Development
Development is more general than training and refers to learning opportunities designed to help
employees grow this provides employees with less detailed information but provides broader
learning, which may be utilized in a variety of settings and for future jobs. Some examples would
include learning computer programming so one could write programs, understanding human
behavior as it relates to motivation, understanding total quality development is to broaden the
employees’ comprehension of generalized situations that may overlap into specific events. In
essence, development is macro, not micro. It results in comprehension of processes and through
this in understanding results in better job performance.
6.1.3 Combination programs
Training programs may combine both training and development. In fact, development is
becoming merely a factor in training programs as the business world begins to experience the
serious deterioration of the education system in grades K through 12. As global competition
increases, training programs for management are becoming more educational in scope with
instruction in such fields as ethnic and cultural development in the world marketplace.

78

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

An example of development is the problem of technical versus managerial expertise allowing for
promotion of both and not creating dead-end jobs. One answer is to develop dual careers paths
allowing both groups promotional and development opportunities. Many industries have used
this procedure and is now quiet common in information technology (IT) departments. By
creating two career development paths- one by the traditional route of assuming management
responsibilities and other by moving up a technical route of assuming management
responsibilities and other by moving up a technical ladder- this helps to cut turnover while
building more efficient IT groups.

6.2 The training process

Without proper planning of the training process, a lot of money will end up being wasted on
unnecessary or obsolete training programs. To ensure that training money is invested wisely
requires the same logic used in all management decisions. The manager must:
1) Identify training needs and establish specific objectives and evaluation criteria
2) Design the appropriate training methods and conduct the training
3) Evaluate the results of the training

Step 0ne: Identifying Training Needs

The initial step in a training program is to identify training need s, often termed needs
assessment. The needs assessment refers to a systematic, objective identification of training
needs. Training needs can usually be determined by consulting with appropriate managerial
personnel regarding the results of assessment centers, areas of need revealed through employee
performance appraisals and determining managers’ concerns for specific training needs to
improve bottom line performance.
Step Two; Designing Training Programs
The second step in a training program is developing training objectives and criteria. The
instructional objectives and criteria describe the performance in terms of training. One example
of an objective would be the attainment of a specific skill or performing a work task within a
certain frame. An example of criteria would be as specified score on test instrument or validation
of performing a specific operation flawlessly a number of times. There are two advantages to
developing objectives. First the objective provides criteria for evaluating the training program.
Second, the objective provides trainers with the specific topics and contents to focus on. This

79

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

ensures that training programs are focusing on important topics and goals that have meaning to
trainees.
Achieving the objectives and criteria can be accompanied through the selection of an appropriate
training approach. The basic techniques include coaching, internship, on-the-job training,
apprenticeship, job rotation, job instruction method, mentoring, case method, continuing
education, college and correspondences courses, lecturers, role playing, simulation programmed
instruction and vestibule training. These training methods can be used to achieve either one or a
combination of learning objectives: cognitive, non-cognitive, and psychomotor. Cognitive
learning relates to job specifics. It is concerned with facts and method sequences. Non-cognitive
is concerned with behaviours : creating and responding to position requirement. Psychomotor
involves performing tasks requiring use of hands, feet and body.

(a) Orientation Training

Orientation training may be defined as training that introduces new employees to the
organization and learning the ropes and familiarize them with the rules procedures, tasks and
values of the organization. In general, the orientation process accomplishes the socializing of the
new employee. Socializing refers to a new employee learning the norms, values, goals, work
procedures and patterns of behaviour that are expected by the organization.

(b) In-house Coaching

Coaching requires a person who has the necessary knowledge to instruct other individuals on
one-to-one or small group basis. The coast most often is a supervisor, but may be a coworker.
Coaching is most often associated with team sports, such as baseball and football, where
individual and team skills are developed through practice and critique. Although knowledge of
the task is important, an effective coast must also possess the ability to communicate the
information to the individual in an efficient manner. The coach and the one being coached must
develop a mutual trusting relationship, if this method is to be successful.

(c) Internships
Interns usually follow a formalized training program. An internship program usually consists of a
series of job assignments over specific time periods designed to prepare person for better job

80

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

responsibilities. To ensure interns make the necessary progress in their job assignments, daily log
of their activities is kept and/or written reports are reviewed by appropriate supervisors. These
jobs are usually channeled through the internship coordinator who oversees the progress and
functions as the administrators of the internship program.

(d) On-the-Job Training

In on-one-job training, the employee is placed in the work situation and the supervisor instructs
the employee in how the job is done directly at the workstation. On-the-job training has several
advantages. First, it is cost efficient. Workers actually produce while they learn. Second it builds
motivation and involves a feedback situation. Finally, it minimizes problems of transfers of
training. When employees learn in the actual job situation, the skills learned are the ones needed.
Although on-the-job training is usually low cost and practical, it does have some disadvantages.
Because training is conducted at the normal production point, trainees may damage equipments,
cause excessive waste materials, and involve significantly higher accident rates.
Another major disadvantage of on-the-job training centers on the trainer. In the majority of cases,
the instructors are either supervisors or experienced line workers. In either case, the trainer may
not have the training skills, interest or tie necessary to properly train the new employee. These
conditions could produce improperly trained employees who, through no fault of their own, are
not performing the job at a high level of productivity and safety.

(e) Apprenticeship Training

Among the oldest types of on-job-training is apprenticeship training. This training is commonly
used by industries including metalworking, construction, and out repair, where the apprentices
are trainee who spent a set of period of time (usually 2 to 3 years) working with an experienced
journeyman. When used properly and apprenticeship programs allows the worker to earn wages
while learning in both on-the-job situations.
The major disadvantages to apprenticeship training seems the set time period placed on all
enrolled in the programs. People have different abilities and learning rates, but all must serve
predetermined training period.

81

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

In the changing technological environment of the 200s, apprenticeship programs also face new
challenges. A trainee may spend several years learning a specific job skill, and then find upon
completion of the apprenticeship that these job skills are no longer needed.

(f) Job Rotation

Job rotation training involves moving trainees around among different jobs within the
organization. This system is often used for management level training and self managed work
team programs. Job rotation allows the employee to learn several job skills and a wide range of
operations within an organization. Cross-trained personnel also provide greater flexibility for
organizations. Cross-trained personnel also provide greater flexibility for organizations when
unexpected transfers, absence, promotions, or other replacements may become necessary. Ob
rotation usually takes place at the same pay rate. It often occurs when the job is temporally
vacant due to a vacation, illness or termination. The employee benefits from learning a variety of
skills. The company benefits from having a group of experienced candidates from whom to
choose when vacancies occur.

(g) The Job Instruction Method

The Job Instruction Method (JIM) is formalized on-the-job training method where the employee
follows as series of written instructions to complete a procedure or to operate machinery. These
written instructions may be provided by the manufacturer of the equipment or by skilled
company employees. The JIM is effective for repetitive situations.
Programmed Instruction (PI) provides the employee with short segments of information who
then respond to selected questions. If the answer is correct, the employee moves on to newer,
more complicate segments of information. If the answer is wrong, the employee returns to the
previous short segments of information and tries again. Because this approach is self-correcting,
it is fast, and, for some individuals, is more effective learning tool.

(h) Computer Assisted Instruction

One popular method of training is programmed instruction or computer-assisted instruction. This
involves a self-taught, self-paced learning system, usually using computers, which eliminates the
need for an instructor. Material is presented to trainees in written form, or by computer programs

82

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

through a series of self-paced steps. Each step consists of factual material to be mastered, which
is directly followed by a question. The trainees’ responses are immediately verified after each
question. If the replies are correct the trainees proceed to the next item. If the responses are
incorrect, the question is repeated. Computer aided instruction offers the advantage of
individualized training. Trainees progress at their own pace, receive immediate feedback, and are
active, as opposed to passive learners. The potential of computer-aided instruction is limited only
by the amount of training needs, and is becoming one of the most popular training methods.

(i) Mentoring
Mentoring establishes a formal relationship between junior and senior colleagues or between a
person with superior knowledge and a less experienced employee. It is similar to a parent-child
relationship in that one provides guidance and tutorship in the ways of career success, including
sponsorship, coaching, and protection of the colleague, exposure to important contacts and
assignments of challenging work.
A mentor can be an important aid in the development of the junior person, and may also be
valuable for improving the job involvement and satisfaction of the mentor. The mentor begins by
determining the employee’s job and the direction of the subsequent career path. Together, the
mentor and the employee should develop career goals based on abilities and company
promotional opportunities. One approach is both parties to maintain a diary of events both
feedback and agreement of the progress attained.
An evaluation format should be established at the start of the mentoring program. This can be as
simple as both parties discussing progress or evaluation by other managers of the employee, or
more formal committee reviews at various points in the program.

(j) The Case Method

The case method is as useful tool in classroom training sessions. Because the case is usually a
generalized version of an actual job situation, it provides authentic data and the opportunity to
suggest appropriate corrective action. Each trainee reads a case report which describes an
organizational situation, then, in a term, they discuss problems, and present differing viewpoints
and a plan of action.

83

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

(k) Off-the-Job Training

Aside from initial orientation and on-the-job apprenticeship most other industry training
probably occurs away from the actual job location. These programs may be taught by staff
professional trainers and consultants, or university faculty.
Off-the job training provides a variety of training, which would not otherwise be available to
smaller companies. Programs can be designed to meet training needs without being restricted by
the lack of organization resources. Typically, off-the-job training creates an environment for
learning. Employers not only need to know the training needs of their employees, but also need
to understand their learning preferences.
Once the training program is completed, if the employee can continue self-directed learning, then
it becomes cost-effective to teach and demonstrate learning style theory. One approach to
transfer of training is to provide a mentor in the workplace to reinforce what has been learned.
This way, the learning experience continues in the workplace.

(l) Continuing Education

Continuing education courses may be offered by colleges or professional organizations. They are
usually of short duration and take place away from the organization. Topics range from self-
improvement and learning particular skills to maintaining a desired level of professionalism
(such as in nursing or accounting).
College and correspondence courses include educational, vocational and technical. As a result of
their broad range, they provide a valuable supplement to a company’s training program. From
the company’s viewpoint, problems that occur include the course content many not satisfy the
organizations specific needs and employees progress is difficult to monitor.

Step Three: The Evaluating Of Training

Evaluating involves gathering information on whether trainees were satisfied with and learned
from the training. The evaluation considers several areas: was the designated need or objective
met and the specified criteria satisfied? Was the teaching method selected effective for the
individual to learn? And finally, will the evaluation assist the instructor to be more effective in
the teaching role?

84

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

The answer to the first area of concern – whether the designated needs were met and the specific
criteria satisfied – involves both the trainee and the trainee’s supervisor. Some type of test will
often measure the trainee’s accumulating of knowledge. However, the key area is whether the
training received by the employee translates back of the job to increase effectiveness. This
knowledge is possessed by the supervisor who should be surveyed through some form of written
appraisal after the trainee has trainee has returned to the job for an appropriate time period.
Whether the selected teaching method was effective will be the result of summating the trainee’s
test scores and the supervisors rating of whether the employee is now more effective on the job.
The final area of concern is the effectiveness of the instructor. The same evaluation data used in
the previous appraisals can be used here also, although the analysis will be somewhat different.
The student test scores and the supervisor’s evaluating need to be reviewed for possible areas of
course weakness and curriculum deficiencies. After determining these effects, these effects, the
instructor can determine the appropriate changes at the teaching level to increase effectiveness.
In conclusion, for an organization or a company to maintain success, it must employ a systematic
approach to training and developing employees. The purpose of training includes:
1. Orienting new employees
2. Improving productivity
3. Developing employee skill levels
4. Enhancing job competency
5. Solving organizational problems.
6. Developing promotable employee from within the organization
In any organization, commitment to training must start at the top, customer service is the key to
success, and all employees are trained to focus on customer satisfaction. The true key to
successful change is employee involvement and commitment. Other employee training resources
include interactive web-based training and the virtual university.

SUMMARY
In the past decade, training has become increasingly popular as an HR technique for improving
employee and managerial performance in organizations. It has been suggested that most
organizations provide some type of formal training and spend millions of money in the effort. An
effective training program depends upon systematic approach including a careful need

85

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

assessment, program design and evaluation of results. In this lesson, we examined the major
organization training and orientation programs. Training and development includes the
orientation of new employees as their job requirements change. Encouraging the development
and growth of employees and managers is another aspect.
You will have the opportunity to assess a training problem and to develop a set of strategies and
techniques for an organization training program. Clearly, a new employee’s initial experience on
the job can have a major affect on a later career, just as a student entering a new class. In
evaluating learning in class, we measure changes in learning skills, behaviour and results. The
impact on the performance of the organization provides the bottom line.

Review Questions
i) Define the terms training, development, and orientation, internship, off the
job training and on the job training.
ii) What are the major goals of orientation training?
iii) How important is motivation in orientation training?
iv) On your first day on the job, what orientation did you receive?

Text Books for Further reading

1. Dessler, G. (2002): Human Resource Management (9th Edition ).NJ,Prentice Hall
2. Flippo,E.B. (1984): Personnel management (6th edition ). Ny, Mcgraw hill
3. Harriman, A. (1985): Women/ men Management, NY, Praeger

86

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON SEVEN

DIVERSITY AND GENDER ISSSUES IN THE WORK PLACE

Lesson Objectives
At the end of the lesson the student should be able to:
a) Discuss the issue of equal pay with regard to gender in the work place
b) Define what a two tier pay is.
c) Explain what is meant by the term fair and square with regard to gender.
d) Explain why organizations use variable pay when compensating their employees.

7.1 The Issue of Equal Pay or Comparable Worth

One of the important compensation issues of the twenty-first century is equal pay for comparable
work. The issue stems from the fact that jobs performed pre-dominantly by women receiving less
pay for jobs that are different from, but comparably worth to, those performed by men.
The issue of comparable worth goes beyond providing equal pay for jobs that involve the same
duties for women as for men. It is not only concerned with whether a female secretary should
receive the same pay a male secretary. Rather the argument for comparable worth is that jobs
held by women should be compensated the same as those held by men, if both job types
contributes equally to organizational success. However, this is continuing problem and will
continue be an active issue as the percentage of women in the workforce continues to climb.

7.2 Two Tier Pay

Two-tier pay rates are recent innovation as businesses attempt to cut their labor costs. There are
actually two different pay systems for the employees. Some plans continue this difference for
long time periods and others set a limit – such 90 days or longer before they become equal.

7.3 Fair and Square

What can HRM professionals do to make their compensation program achieve wage parity while
avoiding federal scrutiny for a defective gender-neutral system? Although employee’s use

87

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

different techniques to keep salaries fair and square, equitable compensations have several
common features such as salaries based primarily on the industry market pay rates, not on some
employee’s value to the firm based on an arbitrary evaluation system.
Another common feature is system in which skills, performance, and tenure are objectively
evaluated and measured. This allows HRM to monitor the process and control adherence to the
approved procedures. The results should be accepted as not deviating from the process. The last
common feature of a gender-neutral compensation system is a regular review for any
irregularities caused by cutbacks, transfers, mergers, or sudden increases in recruiting. When
irregularities are uncovered, they are immediately corrected.
The corners of all companies fair and square compensation system requires continuous
adjustments. The gender system goal is to be able to highlight any unfair treatment for all
employees, even between two white male employees.

7.4 Variable Pay

The twenty-first century is witnessing the hottest trends in HRM. It is the redesign of
compensation, packages to support organizational goals and objectives. This is the result of
helter skelter compensation plans with not coherence policies.
The answer to these problems is the total compensation plan. In such a plan, employees receive a
base pay for core duties, individual and small group achievement pay, and variable pay that is
based on the company’s success.
Total compensation plans are not uniformly successful. The reason is poor implementation of the
variable pay segment of the plan. The correct implementation requires careful attainable
performance goals and techniques to objectively measure those goals. This requires knowledge
of the company’s rent performance results in key areas and comparative industry data.
The variable pay program success requires establishing employee’s trust. If employees don’t
trust their management to tell them the truth or fairly considered their suggestions without
ridicule or punishment, variable any programs will not work.
To make variable pay work, companies should do the following:-
Do not make the program complicated. Goals must clear and straightforward. One way to
accomplish is follow the example of a major national food manufacture. Employees were asked
to set specific variable pay goals for each plant. Representative group developed very specific

88

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

goals for manufacturing have the final approval employees were told the implementation would
be immediate.
Never underestimate the ability of employee to understand. They are at least as sharp as the
managers who created the original compensation program. When the subject is pay-related, they
listen carefully and are away of inequities, which will then share with other employees.
Avoid compensation legal terms and unnecessary details. All employee communications
containing excessive financial and legal terms are very ineffective. A more effective method is
quarterly posters to update employees on the two main goals of variable pay; operating margins
and customer satisfaction. An effective poster tells what is needed and is understood in seconds.
Management must acknowledge present deficiencies in the current compensation plan. The
current deficiencies are the reason for implementing variable plan. The real success is whether
margins and customer satisfaction improves as a result of employee recommending improvement
strategies.
The variable pay program is whether the employees perceive it a being fair and equitable. The
employees must buy-it that the variable pay plan is in their and the company’s best interest.

Review Questions
i) Present examples of comparable worth in an organization you have worked
for.
ii) Define what a two tier pay is.
iii) Explain what is meant by the term fair and square with regard to gender.
iv) Explain why organizations use variable pay when compensating their

Text Books for Further reading

1. Flippo, E.B. (1984 ): Personnel Management (6 th Edition). NY, McGraw-Hill
2. Harriman, A. (1985): Women/ Men Management. NY, Praeger
3. Pell, A (1969): recruiting and selecting personnel. Ny, regents

89

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON EIGHT

MOTIVATING IN CHANGING TIMES PAY FOR THE PERFORMANCE

Lesson Objectives
At the end of this lesson, the student should be able to:
a) Define and discuss the concept of employee incentive programs
b) Describe the growth and objective of major employee incentive systems.
c) Understand the relationship of employee stock ownership plans (ESOP) to goals of
employee satisfaction and productivity.
d) Identity and describe the major types of incentive programs.
e) Define and discuss the external and internal factors, which lead to flexible incentive

8.0 Introduction
As global competition causes our businesses to restructure, the empowerment of employees to
work faster and smarter has become increasingly important. However, the success of employee
empowerment depends upon our ability to motivate this extra effort. Motivation may be defined
in terms of some performance behaviour. Motivation is an emotive state causing persons to want
or need something intensely enough to put forth the necessary effort to achieve it. This drive to
achieve is usually goal-directed, and becomes more complex when dealing with groups or teams.
What drives us as individuals to achieve is often difficult to decipher, as our needs and desires
will vary over time.

8.1 Motivation
Motivation is a process in which people chose between alternative forms of behaviour in order to
achieve personal goals.
The goals sought by individuals can be relatively tangible, such as monetary reward or
promotion, or intangible such as self-esteem or job satisfaction.
The rewards available to an individual are generally classified under

90

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

(a) Intrinsic rewards – those that derive from the individuals own experience e.g. sense of
achievement or a feeling of self-esteem.
(b) Extrinsic rewards – those conferred on a person from outside e.g. a pay rise or promotion.
Managers find reliable links between individual motivation and effective performance.
There are many theories of motivation. The human relations school believes employees want to
do a good job. Although their individual may differ, they would be motivated to achieve their
potential.
Hygiene factors include working conditions, pay, company policies, and interpersonal relations.
When hygiene factors are only factors present in the job, they do not motive employees, they
only satisfy them. However, if they are not present, the work then becomes dissatisfying. To
motivation, the employee needs the presence of the hygiene factors plus the motivators. The
motivators are higher-level employee needs of achievement, recognition, responsibility and
opportunity.
However individuals act to obtain these goals, they must believe their behaviour will lead to their
attainment. A crucial element is how valuable the goal is to the individual. The more value the
individual attaches to the goal, the more effort the individual will expend to achieve the goal.
The three basic needs are achievement, affiliation, and power. The need for power is defined as
controlling others, assuming responsibility for others and having authority over other.

Employee Organization Individual

Performance Goals Needs

8.1 Reasons for Pay Performance Plans

Many organizations have implemented incentive plans for a variety of reasons: increasing labour
costs, more global competitive markets, faster technological advances and greater needs for
productivity quality. In the twenty first century, incentives plans and focusing on pay-for-
performance, improved quality and productivity. By using pay for performance managers are
finding employees improve their job performance.
Incentive plans may not always lead to organization improvement for two main reasons. First
some companies feel that incentive plans are in conflict with a team-oriented approach. Second

91

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

management may have to give sufficient attention to the design and implementation of incentive
programs.
The success of pay for performance system mainly depends on the organization. If the
organization has a strong corporate culture, high morale, and employees trust the management,
then there is a stronger probability of success.
Team incentives should not be used in situations where a few individuals are likely to maximize
their output at the expenses of their coworkers. Group incentives should reduce rivalry and
promote cooperation and concern for all members in the units overall performance.

8.2 Types of Incentive programs

There are three important point related to the effective administration of incentive plans:
1. Incentives. Incentives systems are effective only when management is willing to
pay incentives based on differences in individual or team performance.
2. Motivation. Incentives must be large enough to motivate and reinforce
exceptional performance.
3. Standards. Incentive systems must be based on clearly defined and accepted
performance standards effectively communicated to employees.
There are a number of types in incentive programs, which are described in the following
sections.
1. Individual Incentives
Many factors are involved in the design of an individual incentives plan. For example, most
incentive plans are designed to set production rates according to the technology used. Incentive
payments for hourly employees are based upon the number of units produced, by the
achievement of specific performance goals, or by productivity improvements in the organization.
Who would be including in incentives? The incentives system should be designed with a focus
on specific employees in mind – such as production middle managers, sales people, engineering,
or senior executives. Most organizations are different incentives systems for different levels.
How will performance be measured? The decision whether to use an individual, team or
organization wide incentive is critical. The major factor is the extent to which results can be
measured at the individual or team level, whether the individual’s contribution is measured, and
the effect on teamwork among unit members.

92

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

2. Piecework
One of the oldest most commonly used incentives plans is piecework. In a straight piecework
plan, the employee receives a certain amount of pay for each unit produced. Compensation is
then determined by the number of units produced during a specific time period. Employees often
earn as much as 55 per cent more than their base pay in a piecework system. The differential
piece plan enables employees whose production exceeds the standard output to receive a higher
rate of all of their work than the rate rapid to those who perform below the standard.
The piecework systems are more like succeed in repetitive jobs where units of output can be
reliably measured, when quality is less critical, and with a continuous flow of work.
Unfortunately, it is not effective in jobs that do not have reliable standards of performance. One
of the weaknesses of piecework is that it may not always be an effective motivator. If workers
find that increases in output bring disapproval their fellow workers, then the need for friendship
and approval may outweigh the incentive to produce more. Secondly, the standards for piece
rates often tend to change, because employees discover ways to do the work in less than standard
time.
3. Individual Bonuses
Individual bonuses are an incentive payment that supplements the basic wage. It has the
advantage of reward workers with more pay for higher performance effort, yet still providing a
basic paycheck.
4. Team Bonuses
Team bonuses are usually used when the contribution of an individual employee is either not
measurable or when performance depends on team cooperation. Which work process requiring
more teamwork and coordination among workers, team bonuses are very popular. Most team
bonus plans are tied to such measurable outputs as company profit, improvements in quality, or
cost reductions. Team bonuses, like individual incentives plans, often improve employee
motivation. This allows the organization to:
a. Reward team productivity.
b. Compensate team members for new skills.
c. Increase overall performance
Incentives for Management Employees

93

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Merit raises represent one of the most commonly used incentives systems for managerial level
employees. They are used to motivate managerial, sales and professional employees where raises
can be directly related to performance. Merit increases are usually separate from the person’s
base pay.
5. Sales Incentives
Sales incentive plans are often based on the same factors as individual incentive programs. The
drive needed in selling demand highly motivated sales personnel. The competitive nature of
selling underlines the widespread use of sales incentives.
Sales incentive plans often share many of the characteristics of individual incentives, but there
are also unique requirements. Sales output measures can usually be establishes as the level of
sales (in shillings or units), but sales people are not paid just on sales volume. They often
provided other services, such as customer training, product development, consultation and new
accounts, which involve complex measures of performance. A critical first step for a sales
incentive program then is to determine the most important performance factors. In general, sales
performance maybe measured by the total sales volume and by their ability to generate new
accounts. If measures are used such as promoting new products and providing customer service,
then more complex measures may be used.
Setting performance standards for sales are not without problems because sales performance is
often affected by external factors beyond the control of the salesperson. There are economic and
seasonal fluctuation, differing levels of competition, changes in demand, and more lucrative
sales territories which can all affect an individual’s sales level. Because sales volume along not
be an accurate an indicator of the effort salespeople have expanded many organizations set
quotas based on sales potential. In designing an incentive plan for sales people, there are also the
problems of rewarding extra sales effort and compensating for promotional activities that may
not impact directly on sales.
6. Managerial and Executive Incentives
There is research to support the use of incentive systems for executives, which are usually related
to the strategic goals of the organization. Incentives for managerial and executives are believed
to have an impact upon organizational performance although there is little data to support this
belief. In most cases executive incentive plans are linked to net income, return on investment,
stock price, or total dividend paid. These incentives are usually paid in the form of bonuses and

94

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

stock options. CEO’s often receive over half of their compensation from incentives resulting in
criticism of what they actually contribute to the corporation.
Pros and Cons of Executive Bonuses
Are top executives really worth the exorbitant salaries and bonuses they receive? The answer
usually depends on whom you ask. Corporate compensation committees feel that big bonuses are
necessary as a way to reward superior performance as a ‘fact of business life’ reflecting market
trends for CEO compensation.
However, as previously noted, strong criticism is being voiced regarding the high salaries and
bonuses being paid to senior executives. Others point out that some critics often find executive
may receive record bonuses even though their organizations are performing poorly and
employees are being asked to take wage and salary cuts or layoffs.
7. Executive Perquisites
In order to recruit and attract top people executives usually receive special benefits termed
perquisites. Perquisites or perks are recognized by executives as important in the organization,
the extras used to supplement basic compensation. Perks also serve as status symbol to both
insides and outsiders. Perquisites also provide tax savings to executives, because most perks are
not taxable as income (although this is constantly changing). The more common perks range
from company care special parking expenses accounts, plush offices chauffeurs, country club
memberships, special vacations, physical exams an executive dining room, and liability
insurance. Perks are an entrenched feature of executive compensation.
8. Team profit Sharing Plans
There has been an increase in the number and type of team or group incentive plans. Team
incentive plans are becoming preferable to individual incentives as a result of the increasing use
of team-based approaches. An effective team incentive plan is based on the same factors an
individual plan is based on the same factors as individual plans.
The measures differ in that a team plan is based on some measure of team productivity. Team
plans are particularly effective when team work is essential and when the essential system is
trying to involve the level of participation. Team plans are used when jobs are so interested that
it is difficult (or impossible) to identify individual output measures. The size of a team usually
ranges from 5 to 20 people, depending upon the task and the required coordination between team

95

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

members. The smaller the team, ‘the higher the identification on team performance’. There is
increasingly evidence that team incentives increase productivity.
9. Gain sharing Plans
Gain sharing plans try to reduce the amount of labour required for a given level of output (cost
saving) or increase the output for a given amount of labour (productivity increase). The method
for determining the standard production rate and the incentives rate must be clearly defined. Gain
sharing plans are based on the assumption that better cooperation among workers and between
workers and manages will result in greater effectiveness.

Review Questions
i) Define and the concept of employee incentive programs
ii) Explain why performance plans are important in an organization.
iii) Identity and describe the major types of incentive programs.
iv) Define and discuss the external and internal factors, which lead to flexible
incentive programs.

Text Books for Further reading

1. Dessler, G. (2002): Human Resource Management (9th Edition ).NJ,Prentice Hall
2. Flippo,E.B. (1984): Personnel management (6th edition ). Ny, Mcgraw hill
3. Pell, A (1969): recruiting and selecting personnel. Ny, regents

96

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON NINE

LABOUR RELATIONS

Lesson Objectives:
At the end of this lesson, the student should be able to:
a) Define the concepts of employee relations and industrial relations.
b) Describe the role of the human resource function in employee relations.
c) Explain collective bargaining and the forms of collective bargaining.

9.0 Introduction
The purpose of this lesson is to provide a review of labour relations (employee relations. It deals
with a summary of the elements of employee relations and the developments in industrial
relations. It concludes with the various types of third party dispute resolution in industrial
relations.

9.1 The Elements of Employee Relations

The elements of employee relations consist of:
 The formal and informal employment policies and practices of the organization.
 The development, negotiation and application of formal systems, rules and procedures for
collective bargaining, handling disputes and regulating employment. These serve to
determine the reward for effort and other conditions of employment, to protect the
interests of both employees and how the latter are expected to behave at work.
 Policies and practices for employee voice and communications.
 The informal as well as the formal processes that take place in the shape of continuous
interactions between managers and team leaders or supervisors on the one hand and
employee representatives and individuals on the other. These may happen within the
framework of formal agreements but are often governed by custom and practice and the
climate of relationships that has been built up over the years.

97

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

 The philosophies and policies of the major players in the industrial relations scene; the
government of the day, management and the trade unions.
 A number of parties each with different roles. These consist of the state, management,
employer’s organizations, the trade unions, individual managers and supervisors, HR
managers, employee representatives or shop stewards and employees.
 The legal framework
 A number of institutions such as the Advisory, Conciliation and Arbitration Service
(ACAS) and the employment tribunals.
 The bargaining structures, recognition and procedural agreements and practice which
have enrolled to enable the formal system to operate.

9.2 Industrial Relations as a System of Rules

Industrial relations can be regarded as a system or web of rules regulating employment and the
ways in which people behave at work. The systems theory of industrial relations, as propounded
by Dunlop (1958), states that the role of the system is to produce the regulations and procedural
rules that govern how much is distributed in the bargaining process and how the parties involved,
or the ‘actors’ in the industrial relations scene, relate to one another. According to Dunlop, the
output of the system takes the form of:
The regulation and policies of the management hierarchy; the laws of any worker hierarchy; the
regulations, degrees, decisions, awards or order of governmental agencies: the rules and
decisions of specialized agencies created by the management and worker hierarchies; collective
bargaining arrangement and the customs and traditions of the work place.
The system is expressed in many more or less formal or informal guises: in legislation and
statutory orders, in trade union regulations, in collective agreements and arbitration awards, in
social conventions, in managerial decisions, and in accepted ‘custom and practice’. The ‘rules’
may be defined and coherence, or ill-defined and incoherent. Within a plant the rules may mainly
be concerned with doing no more than defining the status quo which both parties recognize as
the norm from which deviations may be made only by agreement. In this sense, therefore, as
industrial relations system is a normative system where a norm can be seen as a rule, a standard,
or a patter for action which is generally accepted or agreed as the basis upon which the parties
concerned should operate.

98

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Systems theory, however, does not sufficiently take into account the distribution of power
between management and trade unions, nor the impact of the state. Neither does id adequately
explain the role of the individual in industrial relations.
9.2.1 Types of Regulations and Rules
Job regulation aims to provide a framework of minimum rights and rules. Internal regulation is
concerned with procedures for dealing with grievances, redundancies of disciplinary problems
and rules concerning the operation of the pay system and the rights of shop stewards. External
regulation is carried out by means of employment legislation, the rules of trade unions and
employer’s associations, and the regulative content of procedural or substantial rules and
agreements.
Procedural rules are intended to regulate conflict between the parties to collective bargaining,
and when their importance is emphasized, a premium is being placed on industrial peace.
Substantial rules settle the rights and obligations attached to jobs. It is interesting to note that in
the U.K., the parties to collective agreements have tended to concentrate more on procedural
than on substantive rules. In the USA, where there is greater emphasis on fixed-term agreements,
the tendency has been to rely on substantive rules.

9.3 Collective Bargaining

The Industrial relations system is regulated by the process of collective bargaining, defined by
Flanders (1970) as a social process that ‘continually turns disagreements into agreements in an
orderly fashion’. Collective bargaining aims to establish by negotiation and discussion agreed
rules and decisions on matters of mutual concern to employers and unions as well as methods of
regulating the conditions governing employment.
It therefore provides a framework, often in the form of a collective agreement, within
which the views of management and unions about disputed matters that could lead to industrial
disorder can be considered with the aim of eliminating the causes of the disorder. Collective
bargaining is a joint regulating process, dealing with the regulation of employment. It has a
political as well as an economic basis – both sides are interested in the distribution of power
between them as well as the distribution of income.
Collective bargaining can be regarded as an exchange relationship in which wage-work
bargains take place between employers and employees through the agency of a trade union.
Traditionally, the role of trade unions as bargaining agents has been perceived as being to offset

99

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

the inequalities of individual bargaining power between employers and employees in the labour
market.
Collective bargaining can also be seen as a political relationship in which trade unions, as
Chamberlain and Kuhn (1965) noted, share industrial sovereignty or power over those who are
governed, the employees. The sovereignty is held jointly by management and union in the
collective bargaining process.
Above all, collective bargaining is a power relationship that takes the form of measure of power
sharing between management and trade unions (although recently the balance of power has
shifted markedly in the direction of management).
9.3.1 Bargaining power
The extent to which industrial sovereignty is shared by management with its trade unions (if at
all) depends upon the relative bargaining powers of the two parties. Bargaining power can be
defined as the ability to induce the other side to make a decision that it would otherwise not
make. As Fox and Flanders (1969) commented: ‘Power is the crucial variable which determines
the outcome of collective bargaining’. It has been suggested by Hawkins (1979) that a crucial
test of bargaining power is ‘whether the cost to one side is accepting a proposal from the other is
higher than the cost not accepting it. Singh (1989) has pointed out that bargaining power is not
static but varies over time. He also notes that:
Bargaining power is inherent in any situation where differences have to be reconciled. It
is, however, not an end in itself and negotiations must not rely solely on bargaining
power. One side may have enormous bargaining power, but to use it to the point where
the other side feels that it is impossible to deal with such a party is to defeat the purpose
of negations.
Atkinson (1989) asserts that:
 What creates bargaining power can be appraised in terms of subjective assessments by
individuals involved in the bargaining process.
 Each side can guess the bargaining preferences and bargaining power of the other side;
 There are normally a number of elements creating bargaining power.
9.3.2 Forms of collective bargaining
Collective bargaining takes two basic forms, as identified by Chamberlaid and Kuhn (1965).

100

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

 Conjunctive bargaining, which ‘arises from the absolute requirement that some agreement
– any agreement – may be, reached so that the operations on which both are dependent
many continue’, and results in a ‘working relationship in which each party agrees,
explicitly or implicitly, to provide certain requisite services, to recognize certain
responsibilities in respect of each other’.
 Cooperative bargaining, in which it is recognized that each party is dependent on the other
and can achieve it objectives more effectively if it wins the support of the other.
A similar distinction was made by Walton and McKersie (1965), who referred to distributive
bargaining as the ‘complex system of activities instrumental to the attainment of ones party’s
goals when they are in basic conflict with those of the other party’ and to integrate bargaining as
the ‘system of activities which are not in fundamental conflict with those of the other party and
which therefore can be integrated to some degree’. Such objectives are said to define ‘an area of
common concern, a purpose’.

9.4 The HRM Approach to Employee Relations

9.4.1 The HRM model
The philosophy HRM has been translated into the following prescriptions, which constitute the
HRM model for employee relations:
 A drive for commitment – wining the ‘hearts and minds’ of employees to get them to
identify with the organization, to exert themselves more on its behalf and to remain in it,
thus ensuring a return on their training and development;
 An emphasis on mutuality – getting the message across that ‘we are all in this together’
and that the interests of management and employees coincide
 The organization of complementary forms of communication, such as team briefing,
alongside traditional collective bargaining – i.e. approaching employees directly as
individuals or in groups rather than through their representatives.
 A shift from collective bargaining to individual contracts.
 The use of employee involvement techniques such as quality circles or improvement
groups.
 Emphasis on teamwork;
 Harmonization of terms and conditions for all employees.

101

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

9.5 The Parties to Industrial Relations

The parties to industrial relations are
 The trade unions
 Shop stewards or employee representatives
 The Trade Union Congress (the TUC)
 Management
 Employer’s Organizations
 The Confederation of British Industry
 Various institutions, agencies and officers
The Trade Union
Traditionally the fundamental purpose of trade unions is to promote and protect the interests of
their members. They are there to redress the balance of power between employers and
employees. The basis of the employment relationship is the contract of employment. But this is
not a contract between equals. Employers are almost always in a stronger position to dictate the
terms of the contract than individual employees. Trade Unions, as indicated by Freeman and
Medoff (1984), provide workers with a ‘collective voice’ to make their wishes known to
management and thus bring actual and desired conditions closer together. This applies not only
to terms of employment such as pay, working hours and holidays, but also to the way in which
individuals are treated in such aspects of employment as the redress of grievances, discipline and
redundancy. Trade Unions also exist to let management know what there will be time to time, an
alternative view on key issues affecting employees. More broadly, unions may see their role as
that of participating with management on decision making on matters affecting their members’
interests.
Within this overall role, trade unions have had two specific roles, namely to secure, through
collective bargaining, improved terms and conditions for their members, and to provide
protection, support and advice to their members as individual employees.
An additional role that of providing legal, financial and other services to their members, has
come into prominence more recently.
Trade Union Structure
Trade unions are run by full-time central and usually district officials. There may be local
committees of members. National officials may conduct industry-wide or major employer pay

102

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

negotiations while local officials may not be involved in plant negotiations unless there is a
‘failure to agree’ and the second stage of a negotiation procedure is invoked. Major employers
who want to introduce significant changes in agreements or working arrangements may deal
direct with national officials.
The trade union movement is now dominated by the large general unions and the merged craft
and public service unions.
Shop Stewards
Shop stewards or employee representative may initial be responsible for plant negotiations,
probably with the advice of full-time officials. They will certainly be involved in settling
disputes and resolving collective grievances and in representing individual employees with
grievances or disciplinary matters. They may be members of joint consultative committees,
which could be wholly or partly composed of trade union representatives.
At one time, shop stewards were the ogres of the industrial relations scene. Undoubtedly there
were cases of militant shop stewards, but where there are recognized trade unions, managements
have generally recognized the value of shop stewards as points of contact and channels of
communication.
International Union Organizations
The two main international union organizations are the European Trade Union Confederation
and the International Trade Union Confederation. At present neither of these makes much impact
on the UK, but this could change.
Staff Associations
Staff association may sometimes have negotiating and /or representational rights but they seldom
have anything like the real power possessed by a well organized and supported trade union. They
are often suspected by employees as being no more than management’s poodle. Managements
have sometimes encouraged the development of staff association as an alternative to trade unions
but this strategy has not always worked. If fact, in some organizations the existence of an
unsatisfactory staff association has provided an opportunity for a trade union to gain membership
and recognition. Staff association have their uses as channels of communication, and
representatives can play a role in consultative processes and in representing colleagues who want
to take up grievances or who are being subjected to disciplinary proceedings.
The Role of Management

103

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

The balance of power has undoubtedly shifted to management who now have more choice over
how they conduct relationships with their employees. But the evidence is that there has been no
concerted drive by managements to de-recognize unions. As Kessler and Bayliss (1992) point
out: If managers in large establishments and companies wanted to make changes they looked at
ways of doing so within the existing arrangements and if they could produce the goods they used
them. Because managers found that the unions did not stand in their way they saw no reason for
getting rid of them. ‘They argued that management’s industrial relations objectives are now
generally to:
 Control the work progress
 Secure cost-effectiveness
 Reassert managerial authority
 Move towards a more unitary and individualistic approach
As Storey (1992) found in most of the cases he studied, there was a tendency for
managements to adopt HRM approaches to employee relations while still coexisting with
the unions. But they gave increasing weight to systems of employee involvement in
particular communication, which bypass trade unions.
Employers Organizations
Traditionally, employer’s organizations have bargained collectively for their members with trade
unions and have in general aimed to protect the interests of those members in their dealings with
unions. Multi-employers or industry-wide bargaining, it was believed, allowed companies to
compete in product markets without undercutting their competitors’ employment costs and
prevented the trade unions ‘picking off’ individual employers in a dispute.
The trend towards decentralizing bargaining to plant level has reduced the extent to which
employers’ organizations fulfill this traditional role, although some industries such as building
and electrical contracting with large numbers of small companies in competitive markets have
retained their central bargaining function, setting a floor of terms and conditions for the industry.
Institutions, Agencies and Officers
There are a number of bodies and people with a role in employee relations, as described below
The Advisory Conciliation and Arbitration Service (ACAS)
ACAS was created by the government but function independently. It has three main statutory
duties:

104

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

 To resolve disputes
 To provide conciliatory services for individuals in, for example, unfair dismissal cases
 To give advice, help and information on industrial relations and employment issues.
ACAS helps to resolve disputes in three ways: collective conciliation, arbitration and arbitration
services declined considerably. But the individual conciliation case load has been very heavy and
the ACAS advisory work has flourished. These are aimed at encouraging non adversarial
approaches to preventing and resolving problems at work by facilitating joint working groups of
employers, employees and their representatives.
The central arbitration committee (CAC)
The CAC is an independent arbitration body that deals with disputes. It arbitrates at the request
of one party but with the agreement of the other. It does not handle many arbitrations but it deals
more frequently with claims by trade unions for disclosure of information for collective
bargaining purposes.
Employment Tribunals
Employment tribunals are independent judicial bodies that deal with disputes on employment
matters such as unfair dismissal, equal pay, sex and race discrimination and employment
protection provisions. They have a legally qualified chair and two other members, one an
employer, the other a trade unionist.
The Employment Appeal Tribunal (EAT)
The EAT hears appeals from the decisions of industrial tribunals on questions of law only.

9.6 Role Of The HR Function In Employee Relations

The HR function provides guidance and training and will develop and help to introduce and
maintain formal processes; but it does not do line manager’s jobs for them. However, it is their
role as industrial relations specialists. They are also likely to have a measure of responsibility for
maintaining participation and involvement processes and for managing employee
communications. They can and should play a major part in developing employee relations
strategies and policies that aim to:
 Achieve satisfactory employment relationships, taking particular account of the
importance of psychological contracts.

105

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

 Build stable and cooperative relationships with employees which recognizes that they are
stakeholders in the organization and minimize conflict
 Achieve commitment through employee involvement and communications processes.
 Develop mutuality – a common interest in achieving the organization’s goals through the
development of organizational cultures based on shared values between management and
employees.
 Clarify industrial relations processes with trade unions and build harmonious
relationships with them on a partnership basis.
In these capacities HR practitioners can make a major contribution to the creation and
maintenance of a good employee relations climate.

9.7 Employee Relations Policies

Approaches to employee relations
Four approaches to employee relations policies have been identified by Industrial Relations
Services (1994)
 Adversarial: the organization decides that what it wants to do, and employees are
expected to fit in. employees only exercise power by refusing to cooperate.
 Traditional: a good day-to-day working relationship but management proposes and
the workforce reacts through its elected representatives.
 Partnership: the organization involves employees in the drawing up and execution of
organization policies, but retains the right to manage.
 Power Sharing: Employee are involved in both day-to-day and strategic decision
making.
Adversarial approaches are much less common than in the 1960s and 1970s. The traditional
approach is still the most typical but more interest is being expressed in partnership, as discussed
later. Power sharing is rare.
9.7.1 Policy Areas
The areas covered by employee relations policies are:
 Trade union recognition - whether trade unions should be recognized or derecognized,
which union or unions the organization would prefer to deal with, and whether or not it is

106

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

desirable to recognize only one union for collective bargaining and/or employee
representational purposes.
 Collection bargaining – the extent to which it should be centralized or decentralized and
the scope of areas to be covered by collective bargaining.
 Employee relations procedures – the nature and scope of procedures for redundancy,
grievance handling and discipline.
 Participation and involvement – the extent to which the organization is prepared to give
employees a voice on matters that concern them.
 Partnership – the extent to which a partnership approach is thought to be desirable.
 The employment relationship – the extent to which terms and conditions of employment
should be governed by collective agreements or based on individual contracts of
employment (i.e. collectivism versus individualism).
 Harmonization – terms and conditions of employment for staff and manual workers.
 Working arrangements – the degree to which management has the prerogative to
determine working arrangements without reference to trade unions or employee (this
includes job-based or functional flexibility).

9.8 Third Party dispute resolution

The aim of collective bargaining is, of course, to reach agreement, preferably to the satisfaction
of both parties. Negotiating procedures, as described in the next section of this chapter, provide
for various stages of ‘failure to agree’ and often include a clause providing for some form of
third-party dispute resolution in the event of the procedure being exhausted. The processes of
dispute resolution as identified by IRS (2004d) are conciliation, arbitration and mediation.
Conciliation
It is an attempt, through informal discussions, to help parties in a dispute to reach their own
agreement. The third party does not recommend or decide on a settlement. One advantage of this
process is that it helps the parties to retain ownership of the resolution of the problem, which can,
in turn, engender greater commitment to its implementation. Conciliation is the most frequently
used form of third party involvement.
Arbitration

107

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

The parties put the issue to an independent third party for determination. The parties agree in
advance to accept the arbitrator’s decision as a means of finally resolving the matter. There is
sometimes a reluctance to use this method as it removes control over the final outcome from
employers, employees or trade unions.
Mediation
Formal but non-binding recommendations or proposals are put forward for further consideration
by the parties. The use of dispute mediation is rare, partly because it is seen as a halfway house.
There is sometimes a feeling that if conciliation cannot succeed, it may be best simply to go all
the way to arbitration.

Review Questions
i) Define the term collective bargaining.
ii) Explain the 3 main third arty dispute resolution techniques
iii) Identify the various parties to industrial relations
iv) What is role of the human resource function in employee relations?

Text Books for Further Reading

1. Michael Armstrong (2001), A Handbook of Human Resource Management (8th Edition),
Millennium Edition
2. Wayne F. Cascio (2006), Managing Human Resources; Tata Mgraw Hill
3. J.matthewman (2006), Human Resources Effectiveness; Jaico Publiching House

108

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON TEN

GOVERNMENT INVOLVEMENT IN HUMAN RESOURCE ISSUES

Lesson Objectives
At the end of this lesson, you should be able to:
a) Explain the role of the government of Kenya with regard to human resource issues.
b) Outline the role of the Ministry of Labour in Kenya.
c) Identify the mandate of the Industrial Court of Kenya.
d) Discuss reasons why the government involves itself in human resource development.

10.0 Introduction
The government of Kenya has been involved in human resource issues in both the private sector
and the public sector. For instance, the development of the HRD Policy for Public Service of
Kenya was necessitated by the challenges that were faced in training and capacity building
processes in the Kenya Public Service since independence. Training was hitherto guided by
administrative circulars, human resource General letters and various guidelines issued to the
Service from time to time.

10.1 Human Resource Development Policy

The formulation of a comprehensive HRD Policy was therefore part of the Government efforts to
improve efficiency and effectiveness in service delivery.
In the past Kenyan Public Service had paid scanty attention to Performance Management. As
part of the reform initiatives undertaken by the Government, Performance Management has
taken centre stage as a priority area for the Government in its efforts to respond to the needs of
the Public in terms of service delivery.

109

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

10.2 Role of the government in human resource development

The government provides funding of training and capacity building programmes in the Public
Service.
It also ensures optimal staffing levels in the service, recruiting human resource on the basis of
knowledge, skills and experience, and providing the cases for succession management. It
emphasizes demand driven and cost effective training that responds to service delivery
requirements and seeks to facilitate career growth in the Public Service.

10.3 Government Institutions Involved In Human Resource Issues

Ministry of Labour

Its Core Functions include:

1. Promotion of harmonious industrial relations in the country.

2. To ensure compliance with labour laws, international labour standards and codes of
practice
3. as well as review of labour standards and domestication of international conventions and
4. recommendations
5. Promotion of best practices of occupational safety and health in all workplaces
6. To plan, development and promotion of effective utilization of human resources
7. Judicial determination of trade disputes and registration of Collective Bargaining
Agreements
8. (CBAs)
9. Facilitation of the development of micro and small enterprises.
10. Provision of labour market information
11. To ensure availability of skilled manpower for the industry
12. Promotion of productivity improvement
13. Provision of social security through National Social Security Fund (NSSF)

110

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Industrial Court of Kenya

The Industrial Court of Kenya has been one of the country's pillars for maintenance of industrial
peace. It was established under the Trade Dispute Act, Cap. 234, (Repealed) and Laws of Kenya
and implement the following mandate:

1. To hear and determine industrial disputes that are referred to it by the Minister for
Labour;
2. To register Collective Bargaining Agreements (CBAs) between employers and workers;
3. To promote the spirit of tripartism between Government, employers and employees.

Review Questions

i) Highlight the core functions of the ministry of labour

ii) What is the mandate of the Industrial Court of Kenya?
iii) Explain the role of the government in human resource development of Kenya.

Text Books for Further reading

1. Dessler, G. (2002): Human Resource Management (9th Edition ).NJ,Prentice Hall
2. Filippo, E.B. (1984): Personnel management (6th edition). Ny, Mcgraw hill
3. Harriman, A. (1985): Women/ men Management, NY, Praeger

111

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON ELEVEN

JOB DESIGN

Lesson Objectives
At the end of this lesson, the student should be able to:
a) Define the term job design
b) Distinguish between job enlargement and job enrichment
c) Explain the various approaches to job design
d) Discuss the merits and demerits of information technology in human resource
management

11.0 Introduction
Jobs are fundamental to organizations. They are the principal vehicles for the allocation of tasks,
duties and roles to the various personnel employed by the organization. Most organizations are
faced by change in one form or another. Adapting the organization to respond adequately to
change, is a growing focus of attention in business and public services. Job design is therefore a
key element in responding to changing conditions.

11.1 Job Design

The concept of job design is ascribed to Davis and Canter (1955), who saw job design as the
organization (or structuring) of a job to satisfy the technical –organization requirements of the
work and the human requirements of the person performing the work. Davis’s work led him to
identify a number of design problems relating to the structuring of jobs. These were:
a) Identifying job boundaries
b) Identifying the factors of work in jobs
c) Determining methods of estimating and controlling these factors
d) Developing systematic design methods
e) Developing criteria for evaluating designs

112

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Davis concluded that in order to achieve more effective performance and greater job satisfaction
on the part of the employee, it was necessary for jobs to be meaningful to the individual
concerned.

11.2 Approaches to Job Design

1. Job Design and Scientific Management
The rationale of Scientific Management is where human work and effort is seen in terms of its
relationship to machines and the systems created for them. The hallmarks of job design
according to scientific management approach are as follows:
a) Maximum degree of job specialization
b) Minimal level of skill
c) Minimal level of completion of tasks
d) Minimal learning time
e) Maximum use of machines
f) Minimal degree of flexibility or discretion in the job
g) Measurability of job tasks
2. Socio –Technical Systems
Jobs are seen as arising from, and dependent on, the way in which the management approached
the technical and social features of their organization. The social system embraces both formal
and informal groups, for example, official work-teams and unofficial groupings based on
friendships and other informal relationships. The technical system encompasses tasks and
production processes as well as visible features such as plant and equipment.
3. The Quality of Working Life
The aim of quality of working life is geared towards creating conditions in which employee
needs are given a high priority compared with the requirements of technology.
In relation to tasks:
a) Tasks should form a coherent job
b) Tasks should provide some variety of peace, method , location and skill
c) Tasks should provide feedback on performance
d) Tasks should provide for some degree of discretion by the person concerned
In relation to job and work organization:
a) There should be opportunities for learning and development

113

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

b) Some sort of desirable future should be available

c) People should be able to contribute towards decisions affecting their job
d) Work goals should be clear and provide a degree of challenge
e) Adequate resources should be available to the job holders
In relation to the work context:
a) Industrial relations procedures should be jointly agreed between management and
employees
b) Payments systems should be seen to be fair and should be related to contribution made.
c) Personnel policies should be fair and adequate
d) Physical surroundings should be reasonable
4. Job Enrichment and Job Enlargement
The term job enrichment was coined by Hertzberg (1968) to denote the vertical enlargement of a
job by adding responsibility and opportunity for personal growth.
Job enlargement generally involves only the horizontal extension of the job i.e. more of the same
thing.
Hertzberg (1968) puts it thus: Job enrichment provides the opportunity for the employee’s
psychological growth while job enlargement merely makes a job structurally bigger.
In job enrichment the emphasis in redesigning jobs is directed towards individual job satisfaction
rather than towards increased efficiency.
5. Autonomous Work Groups
The idea of autonomous work groups is an extension of job enrichment to a collection of jobs.
Such groups tend possess the following characteristics:
a) They permit full labour flexibility by job rotation
b) They have a considerable degree of autonomy in the allocation of work between
members

11.3 Changing Technology in Office Systems

Microelectronic technology has a number of distinctive features. It is flexible. Instantaneous and
can be rapidly modified. It is reliable, available and cheap. The new technology poses a
challenge to trade union representatives. If questions of job content, skills, training and grading
are neglected (by the union) there is a danger that a large potion of the office workforce will find
itself in more routine and less satisfying jobs.

114

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Information Technology presents opportunities as well as threats to employees.

Advantages
a) Learning new skills
b) Tedious jobs can be relegated to machines
c) Possibility of upgrading
d) Easier and quicker access to information
e) Easier means of remedying typing errors/ amending text
f) More jobs for those who are skilled in maintenance of electronic equipment
g) More jobs for programmers and software designers
h) Opportunities for shorter working day/week
Disadvantages
a) Fewer jobs will be required
b) Office workers might become machine minders
c) Individuals might be tied to their work stations
d) Health problems associated with Visual Display Units/printers, etc
e) Difficulties of learning to operate electronic machines
f) Strong competition between employees for available jobs
g) Loss of personal contact as information is passed by machine instead of mouth

Review Questions
i) Describe the quality of working life in relation to tasks
ii) Distinguish between job enlargement and job enrichment
iii) Explain the various approaches to job design
iv) Discuss the effects of information technology on human resource management

115

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Text Books for Further reading

1. Cole G.A. (1991): Personnel Management; Theory and Practice (Second Edition)
Guernsey Press
2. Dessler, G. (2002): Human Resource Management (9th Edition ).NJ,Prentice Hall
3. Filippo, E.B. (1984): Personnel management (6th edition). Ny, Mcgraw hill
4. Harriman, A. (1985): Women/ men Management, NY, Praeger

116

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON TWELVE

JOB EVALUATION

Lesson Objectives
At the end of this lesson, you should be able to:
a) Define the term, Job Evaluation
b) Describe the purpose of Job Evaluation
c) Explain the analytical methods of Job Evaluation
d) Explain the non-analytical methods of Job Evaluation

12.0 Introduction
Job evaluation is the name given to any activity which sets out to make systematic comparison
between jobs to asses their relative worth, for the purpose of establishing a rational pay structure.
In essence job evaluation aims to reduce reliance on arbitrary methods of pay determination by
introducing an element of objectivity in the ways jobs are compared. Every job evaluation
method requires at least some basic job analysis in order to provide factual information about the
jobs concerned. Nevertheless, as with many other aspects of personnel management, judgment
has to be exercised in the final analysis. As Kempner (1980) points out: “Job evaluation methods
depend to some extent on a series of subjective judgments made in the light of concepts like
logic, justice and equity and the progressive refinement of job evaluation techniques is an
attempt to minimize the subjective element.”

12.1 Purpose of Job Evaluation

The purpose of job evaluation is to produce a defensible ranking of jobs on which a rational and
acceptable pay structure can be built. There are a number of important features of job evaluation
which need to be recognized at the outset. These are:

1. Job evaluation attempts to assess jobs, not people.

2. The standards of job evaluation are relative, not absolute.

117

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

3. The basic information on which jobs evaluation are made is obtained from job analysis.
4. Job evaluations are carried out by groups, not by individuals.
5. Job evaluation committees utilize concepts such as logic, fairness and consistency in
their assessment of jobs.
6. There is always some elements of subjective judgment in job evaluation.
7. Job evaluation does not determine pay scales, but merely provides the evidence on which
they may be devised.

12.2 Job Evaluation Methods

Job evaluation methods can be divided into two basic categories:
a) Non-analytical methods
b) Analytical methods

The primary difference between these two categories is that the non-analytical methods take
whole jobs and rank them, whereas the analytical methods break jobs down into their component
parts and then compare them factor by factor. The implication is that analytical methods provide
a more refined means of measurement than non-analytical methods. This point is particularly
relevant for equal pay legislation, since only analytical schemes are considered to provide an
acceptable means of identifying “work of equal value”.

12.2.1 Non-analytical methods

The two most widely-used non-analytical methods are job ranking and job grading or job
classification
1. Job Ranking
The basic process in job ranking is to select a representative sample of jobs (so called
benchmarks), prepare basic job description for them, compare them on the basis of the
information in the job descriptions and rank them in order of their perceived importance. Each
evaluator’s ranking is discussed job evaluation committee, compared with the results obtained by
other evaluators, and eventually a final rank order is drawn up. The remaining jobs in the
organization are then slotted in to the evaluated rank order on a like-for-like basis. The advantage
of this form of evaluation is that it is relatively simple and cheap to operate. Its main

118

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

disadvantage is that it relies heavily on the subjective assessments of the evaluators, and in
particular on their personal knowledge of the benchmark jobs.
In essence, the paired comparisons approach is an attempt to reduce the subjective element to a
limited extent by at least forcing judges to make comparisons in a systematic way. Nevertheless,
in the final analysis, such a system of evaluation relies considerably on personal judgment.

2. Job Grading
This form of evaluation, also known as job classification, attempts to distinguish between work
levels by establishing a small number of general criteria against which specific jobs may be
compared. The most well-known, and widely used, system of job grading is the scheme
developed by the Institute of Administrative Management. This scheme now has eight grades,
each with their statement of general criteria, into which almost 1000 typical office tasks can be
slotted. As fig 10.2 shows, grades A and B contain jobs at the elementary level of office work,
while Grade F, G and H contain work of high professional level. In a survey of job evaluation
methods conducted by Thakur & Gill (1976)², about one third clerical, administrative and
supervisory jobs were evaluated using some form of grading or classification.

Summary of I.A.M. Job Grading Scheme

Grade A – Tasks requiring no previous clerical experience; each individual task is either very
simple or closely supervised. Examples include: simple sorting and filling, and messenger
work.

Grade B – Simple tasks carried out in accordance with limited number of well-defined rules;
fairly short period of training; tasks closely directed and checked. Examples include: simple
copying work, and straightforward adding operations and using machine.

Grade C – Tasks of routine nature and following well-defined rules, but requiring some
experience or special aptitude. Examples include: simple calculating machine operations
preparing routine invoices, and shorthand –typing of routine work.

119

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Grade D – Tasks requiring considerable experience, but only a limited degree of initiative,
and which are carried out within existing procedure. Work is not subject to same amount of
direction as in lower grades. Examples include; shorthand typing of non-routine work,
routine administrative of a group of sales or purchase accounts.

Grade E – Tasks of requiring a basic level of professional knowledge or the performance of

clerical/administrative work requiring the occasional use of discretion and initiative, or the
supervision of two to six clerical staff. Examples include: routine computer programming,
supervision of a section of typists.

Grade F – Tasks requiring intermediate professional or specialized knowledge, or the

performance or control of complex clerical or routine administrative work requiring
occasional non-routine decisions and some use of judgment on routine matters, or the
supervision of five to twelve clerical staff. Examples include supervision of a print room,
conducting routine O&M or systems analysis surveys, complex computer programming, and
full secretarial service to chief executive.

Grade G – Tasks requiring professional or specialized knowledge to first degree standard or

advanced professional qualification, or the performance or control of work of wide
complexity or importance requiring regular non- routine decisions and exercise of discretion,
or supervision of nine to twenty clerical staff. Examples include: supervision of large wages
office, computer programming of complex sets of programs, and tutoring on clerical training
courses for staff in grades A-F.

Grade H – Tasks requiring professional or specialized knowledge to degree or final

qualification level, or performance or control of complex arid important work, requiring
extensive use of judgment or initiative and some contribution to policy-making, or
supervision of twenty or more clerical staff together with their supervisors. Examples
include: supervision of a customer accounts office with responsibility to credit control within
agreed policy, leading complex O & M or systems analysis projects, and control of complex
computer programming projects and their staff.

120

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

Source: I.A.M. (1976)

As well as being given the broad parameters described above, users of the I.A.M. system have
access to some 1000 task definitions against which they can compare practically every office
task they are likely to incorporate in their business. Any management using this system will be
able to work out appropriate salary scales for each of the grades identified, and thus devise a
reasonable structure of pay differentials. The main advantage of job grading is its relative
simplicity and cheapness.

12.2.2 Analytical methods

Analytical methods of job evaluation examine jobs in terms of their principal components, and
not as whole entities. The most widely-used analytical methods are the Points Rating Method
and the Hay-MSL Guide Chart System. In both of these methods differences between jobs in an
organization can be described, distinguished and measured in relative terms, with a fair degree of
credibility, such methods require much more time and effort than non-analytical methods, and
are therefore more costly to operate, but many organizations prefer them because they provide a
sounder and more defensible basis for wage and salary administration than non-analytical
methods.

The basic procedure for introducing an analytical method is as follows:

1. The aims/objectives of the exercise are agreed

2. the organization appoints its own job evaluation team fro amongst its own staff, or hires
consultants; employee representatives are elected to the team, as appropriate
3. Relevant job factors are agreed upon
4. Each factor is subdivided by ‘degrees’ or ‘levels’
5. Each factor (and its sub-divisions) is given a weighting
6. points are then allocated to each factor and subdivisions
7. Benchmark jobs are identified
8. detailed job description are written for these jobs

121

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

9. Each benchmark job is evaluated in accordance with the points system

10. Benchmark jobs are ranked according to its score
11. The initial ranking of benchmarks is reviewed to identify any anomalies
12. The final benchmark ranking is agreed
13. The remaining jobs are slotted into the benchmark ranking
14. Jobs are grouped within the ranking to isolate possible salary grades, or may be allocated
as salary scale on the basis of their individual points total

1. Points Rating Methods

The most frequent factors employed in points systems are as follows:

Skill
 Education and training required
 Breadth/depth of experience required
 Social skills required
 Problems-solving skills
 Degree of discretion/use of judgment
 Creative thinking

Responsibility/accountability
 Breadth of responsibility
 Specialized responsibility
 Complexity of the work
 Degree of freedom to act
 Number and nature of subordinate staff
 Extent of accountability for equipment/plant
 Extent of accountability for product/materials

Effort
 Mental demands of job
 Physical demands of job

122

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

 Degree of potential stress

Working conditions
 Timescale of operations
 Turbulent or steady- state
 Amount of necessary traveling
 Diversity of subordinates
 Pressures from other groups
 Difficulty or hazardous surroundings

Most point’s methods incorporate the above factors in one form or another. When devising
an “in-house” system, the inclusion of particular factors and decisions about their weightings
will be the subject of negotiation between various interested parties. Where trade unions are
involved, they will want to be consulted about these matters and to have some influence over
the choice of factors in their weightings. Additionally, a significant numbers of women are
employed care needs to be taken to ensure that the job factors selected do not implicitly favor
ones sex against another, for example by giving higher weightings to length of service and
physical demands (which favor men) in comparison to mental complexity and accountability
for others (which may be considered as neutral). In a leaflet on the amended Equal Pay Act,
the Equal Opportunities Commission provides examples of such “neutral” factors. Neutral
factors provide a fairer basis for ensuring “equal pay for work of equal value”.

Different management groups also have their preferred weightings. Line managers tend to
stress the importance, and therefore weighting, of responsibility, whereas specialists
managers tend to emphasize skills. Ideally, whatever the eventual choice of
factors/weightings, one standardized set of criteria should emerge to be applied consistently
to all the jobs in the population concerned.

2. Guide Chart Method

A variation of the usual point’s method is widely-used Hay-MSL Guide Chart method. In
this method the basic point’s matrix is a standard one, which is applicable across

123

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

organizational and indeed national boundaries. This is an important future for organizations
that wish to adopt a unified approach that can be applied company-wide, and who are
prepared to make full use of Hay consultants in setting up the exercise and seeing through to
its to its conclusion. The basic structure of the Hay system is as follows:

1. Three broad factors are employed for the analysis: Know-how, Problem-solving
and Accountability, each scored on a Guide-Chart.
2. Each factor is considered by breadth and depth.
3. Know-how refers to the knowledge and skills required to attain “average
acceptable performance”.
4. Problem solving refers to the analytical and evaluation aspects of the job, and is
seen in two dimensions the extent to which thinking is prescribed and the nature
of the thinking challenge (variability creativity, etc).
5. Accountability refers to “the answerability for actions and the consequences of
that action”. It has three dimensions: (a) the extent of freedom to act, (b) the job
impact on end-results, and (c) the magnitude of the job primarily seen in terms of
responsibility for financial results.

The Hay system, as with any other points rating system cannot measure jobs with complete
and objective assurance. What it can do is to reduce the subjective and arbitrary elements by
a substantial margin, and thus achieve a fairer result with a Non-analytical method. After
evaluation, the Hay system ranks benchmarks jobs in accordance with point’s totals. The
final rank order is agreed after any Red-circling anomalies have been put right, and salaries
are then derived from the application of a tailor-made formula agreed between the individual
organization and the Hay consultants.

Conclusion
Job evaluation can play an important role in the development of systematical and equitable pay
systems. Analytical systems, in particular, provide a means of identifying key job factors,
weighting them as appropriate, and the comparing jobs against them, and eventually arriving at
an understanding of relative value of all the jobs in a particular population. On the basis of this

124

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

evidence of relative worth, pay differential can be worked out in way that is demonstrably fairer
than arbitrary decision of individuals or powerful section groups. To the extent that job
evaluation bureaucratizes the formulation of pay scales, it reduces the negotiation power of both
trade unions and other influential groups by lobbying them of the possibility of appearing to
emotional consideration, which has very little to do with the nature, scope and contribution of
jobs in the organizational hierarchy.
Non-analytical methods, popular though they may be, lack the credibility of Analytical methods.
No employer, for example, can resist an equal pay demand with any confidence if he is
employing Non-analytical methods of job evaluation. The Equal Opportunity legislation will not
consider such methods as “proper job evaluations”

Review Questions
i) Distinguish between analytical and non analytical methods of job evaluation
ii) Describe the purpose of Job Evaluation
iii) Explain the Institute of Administrative Management job grading scheme
iv) Explain the Guide Chart method of Job Evaluation

Text Books for Further reading

1. Cole G.A. (1991): Personnel Management; Theory and Practice (Second Edition)
Guernsey Press
2. Dessler, G. (2002): Human Resource Management (9th Edition ).NJ, Prentice Hall
3. Filippo, E.B. (1984): Personnel management (6th edition). Ny, Mcgraw hill
4. Harriman, A. (1985): Women/ men Management, NY, Praeger

125

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

LESSON THIRTEEN

THE SUCCESS SYSTEM: HRM STRATEGY

Lesson Objectives
At the end of this lesson, the student should be able to:
a) Define the concept of strategy and based of the HR strategy formulation process.
b) Understand the relationship human resource strategy and overall organizational
strategy.
c) Recognize the important of corporate culture and its relation to strategy.
d) Experience these concepts in a management situation.

13.1 HRM Strategy

In a world unpredictability and rapid change, what makes one organization a winner, yet another
fails to adjust to the same opportunities? How do some companies move forward and seize new
product and market opportunities, yet other larger companies fail to take advantage of their size
and situation?
A strategy is way of getting things done. It provides a game plan for action. Strategy includes the
formulation of goals and action plans for their accomplishment. Strategy considers the
competitive forces at work in managing an organization and the impact of outside environment
on organization action. Good management does not mean trying harder by using old, out of date
methods. It involves developing strategies for coming up with new product, making sure they are
what the customer wants, and recruiting skilled employees to provide a competitive advantage.
Acceleration change in technology, shorter product life cycle, and new unexpected competition
contribution to make succeeding in business harder than even. The evidence indicates that people
play a major role in whether or not an organization performs. Managers make strategy determine
business success or failure. The excellent companies must be able to transform the way they
operate and recognize the importance of corporate culture in devising and executive new
strategies. In fact, we suggest the biggest stumbling block in the path of strategic changes is
usually an old and inflexible corporate culture.

126

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

A culture that prevent a company form meeting competitive threats or from adapting to changing
economic or social environments can lead to the company’s stagnation and ultimate failure
unless it make a conscious effort to change. This HRM culture change effort include activities,
which are design to improve the skill, abilities, structure, and motivation levels of organization
members . The goals are improved technical skills and improved interpersonal competence and
communication. Such HRM effort may also be directed towards improved leadership, decision-
making and problem solving among organization member. The assumption underlying such
effort is that by developing an improved culture, a more effective organization will result.
The need for strategy management has increasing become a fact of organization life. The
strategy plan is often the starting point for the evaluation of the actions of management personnel
and their organizations. Strategy management provides the basic direction and framework within
which all organization activities take place. An understanding of strategic management,
potentially the most advanced and sophisticated type, makes it easier for managers to develop a
vision of the future for their organization. In this lesson we examine stage six of Success System
Model: changing for success. An overview of the strategy HR management is, how it is used an
dhow it fits into the strategy management process. If you gain a thorough understanding of this
process, you are more likely to become an effective HR manager.

13.2 Organizational Strategy

Acceleration changes in technology, shorter product life cycles, and unexpected indicates that
managers play a major role in determining how well an organization perform.
There are four core characteristics that are exhibited in all best run organization.
1.] Managing into the future. The first characteristic is the necessity to think constantly about
new product and then to allocate resources and get them to the market place fast. Well-managed
companies provide a clear sense of direction and strategic vision of the future. There is a basic
toward action, rapid problem solving and innovation.
2.] A strategy action plan. The managers of best-run companies tend to develop a strategy game
plan for achieving advantage. Successful companies do their marketing homework. Staying close
to the customer is a characteristic of successful: they seek what the customer wants. A related
factor is staying close to what the competition is doing.

127

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

3.] The corporate culture. In well – organized associations, people make things happen. There is
a commitment to cooperate values and objectives and a willingness to take risks. There is a sense
of autonomy in entrepreneurship and a belief in the importance of HR values and services.
4.] Strategic flexibility. The companies that cope best with the rapidly changing environment try
to anticipate changes even if this means reformulating strategy or altering the corporate culture.
These companies are result-oriented and market driven. There is a belief in productivity through
people that encourage change and supports risk taking in order to gain succession of both current
and new product markets.

Review Questions
i) Explain the characteristics that are exhibited in all best run organization.
ii) Define the concept of strategy and based of the HR strategy formulation
process.
iii) Explain why the need for strategy management has increasing become a fact
of organization life.

Text Books for Further reading

1. Dessler, G. (2002): Human Resource Management (9th Edition ).NJ,Prentice Hall
2. Filippo, E.B. (1984): Personnel management (6th edition). Ny, Mcgraw hill
3. Harriman, A. (1985): Women/ men Management, NY, Praeger

128

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

SAMPLE PAPER 1
MT KENYA UNIVERSITY
SCHOOL OF BUSINESS AND PUBLIC MANAGEMENT
BBM 311: HUMAN RESOURCE MANAGEMENT
Instructions to candidates: Answer Question ONE and any other TWO questions
QUESTION ONE
a) Highlight 5 roles of a human resource manager within an organization. (5 marks)
b) Enumerate 5 activities that are involved in succession planning when determining a
suitable supply of successors for key jobs in an organization. (10 marks)
c) Why is it important to compensate employees? (5 marks)
d) Although training and development are similar and both are critical to the success of an
organization, there are some important differences. Differentiate between the two terms
citing relevant examples in each case. (6 marks)
e) Mention at least 4 elements of employee relations. (4 marks)
QUESTION TWO
Discuss the following issues as used in modern human resource management, citing relevant
examples in each case.
i. Issue of comparable worth or equal pay (5 marks)
ii. Two tier pay (5 marks)
iii. Fair and square (5 marks)
iv. Variable pay (5 marks)
QUESTION THREE
a) Describe the core functions of the ministry of labour (10 marks)
b) Describe 5objectives of the Federation of Kenya Employers (10 marks)

QUESTION FOUR
a) Explain 3 points that a human resource manager should consider in the effective
administration of incentive plans. (6 marks)
b) Explain any types of incentives that a human resource manager can use to motivate staff in an
organization. (14 marks)
QUESTION FIVE

129

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

a) i) Define the term Job Evaluation (2 marks)

ii) Explain 3 objectives of job evaluation within an organization. (6 marks)
b) i) Define the term personnel planning. (2 marks)
ii) Describe the steps involved in the recruitment and selection process. (10 marks)

130

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

SAMPLE PAPER 2
MT KENYA UNIVERSITY
SCHOOL OF BUSINESS AND PUBLIC MANAGEMENT
BBM 311: HUMAN RESOURCE MANAGEMENT
Instructions to candidates: Answer Question ONE and any other TWO questions
QUESTION ONE
a) In Job evaluation, distinguish between job ranking and job grading.
(4marks)
b) Mention 6 factors to take into account when forecasting personnel needs within an
organization. (6 marks)
c) When recruiting candidates which are the sources that an organization can use to identify
suitable candidates for jobs. (5 marks)
d) Describe the performance appraisal review process involved in developing employees in
an organization. (5 marks)
e) Explain 3 methods of dispute resolution that involves the use of third parties. (6 marks)
f) Describe 4 important features of collective bargaining. (4 marks)

QUESTION TWO
a) Explain 5 objectives of training and development in an organization. (10 marks)
b) Discuss 5 important reasons for carrying out performance appraisals. (10 marks)
QUESTION THREE
a) Discuss 5 elements of employee relations (10 marks)
b) Describe 5 areas covered by employee relations policies when addressing labour related
issues in an organization. (10 marks)
QUESTION FOUR
a) Firms can’t always get the employees they need from their current staff, and sometimes
they don’t just want to. What 5 sources can a firm use to source outside candidates?
(10 marks)
b) Explain 5 skills involved in selection interviewing? (10 marks)

131

Downloaded by Barke Yassir ([email protected])

 lOMoARcPSD|21958636

QUESTION FIVE
a) Define the term job design (2 marks)
b) Distinguish between job enlargement and job enrichment (4 marks)
c) Discuss the merits and demerits of information technology in human resource
management (14 marks)

132

Downloaded by Barke Yassir ([email protected])