CURRICULAM VITAE

NAME : DINESH KUMAR R

E-mail id : [email protected]
MOBILE NO : +91- 82705 12562, +91-8760457004

Name : DINESH KUMAR R

Designation : QC Inspector
Nationality : Indian
Date of Birth : 23-06-1991
Qualification : DME – Diploma in Mechanical Engineering
SRPC Sri Renga Polythechnic College Siruganur Trichy.

Additional Qualification : CSWIP 3.1 Certified WELDING INSPECTOR

(Certificate No.: 744193)
: ASNT (LEVEL II)
 Ultrasonic Testing
 Radiography Testing
 Magnetic Particle Testing
 Liquid Penetrate Testing

Total Year of Experience : 11+ years

PREVIOUS EXPERIENCE

COMPANY : TQCERT SERVICES PVT. LTD, TATA PROJECTS LTD

CLIENT : VEDANTA LIMITED
PROJECT : VEDANTA IPP UNIT III (600 MW), Jharsuguda , Odisha
DESIGNATION : Quality Inspector (Piping & Structurals)
DURATION : 24th February 2024 to 10th April 2024

JOB DESCRIPTION:

 Implementation of approved procedures (WPS & PQR) and maintaining

quality records as per quality management system requirements.
 Prepare inspection reports, NCR, Technical quires, Weekly QA/QC reports &
Radiography log sheets.
  Witnessing/Reviewing of Welding Procedure Qualification and Welder
performance tests and Destructive Testing of Specimens.
 Documentation of completion of all inspection activities in all respect.
 Maintaining Calibration Documents of Testing & Welding equipments.
 Conducting of Welder Qualification Tests as ASME section IX acceptance
standards.
 Periodical verification of welder qualification, qualification of NDT,
personnel, consumables as per approved procedures and specification.

COMPANY : DELTA ENGINEERING SERVICES & TUV RHEINLAND (INDIA)

PVT. LTD., (TPI)
CLIENT : CONSORICO TOYO SETAL HDT PAULINIA(ITALY)
PROJECT : HEATER STRUCTURALS, RAJASTHAN SHUTDOWN PROJECT
DESIGNATION : Quality Inspector (Structurals)
DURATION : 1st October 2023 to 10 DECEMBER 2023

JOB DESCRIPTION:

 Reviewing & Evaluating of RT films as AWS D1.1 acceptance standards.

 Radiant panels and Radiant Arch and Radiant floor and Radiant platform and
handrail are Fitup ,weld visual,dpt test, final inspection witnessed to all
documents.
 Stack module and stack platform & handrail and ladders,stairs,external
structure are fitup,weld visual,dpt test,final inspection witnessed to handling
all documents.
 Inspection of Refractor steel supports and beams, hangers.
 Implementation of approved procedures (WPS & PQR) and maintaining
quality records as per quality management system requirements.
 Prepare inspection reports, NCR, Technical quires, Weekly QA/QC reports &
Radiography log sheets.
 Maintaining Calibration Documents of Testing & Welding equipments.
 Conducting of Welder Qualification Tests as ASME section IX acceptance
standards.
 Periodical verification of welder qualification, qualification of NDT,
personnel, consumables as per approved procedures and specification.
 Witnessing/Reviewing of Welding Procedure Qualification and Welder
performance tests and Destructive Testing of Specimens.
 Documentation of completion of all inspection activities in all respect.
COMPANY : DELTA ENGINEERING SERVICES & TUV RHEINLAND (INDIA)
PVT. LTD., (TPI)
CLIENT : STEAG ENERGY SERVICES (INDIA) PVT. LTD
PROJECT : GNAL Power Plant Unit I & II (65 MW), GUJARAT SHUTDOWN
PROJECT
DESIGNATION : Quality Inspector (Piping and structural)
DURATION : 21st August 2023 to 30th September 2023

JOB DESCRIPTION:

 Fuel gas Mechanical base steel platform from gas area to GT connection.
 GT interconnection Structure and enclosure structure like Cooling Water
System, N2 system, H2 system, CO2 system, fuel oil system, oily water
drain system
 STG interconnection platform steel structure and their stair, enclosures
for lube oil system, seal oil system, control oil system, cooling water
system
 Pipe Rack from Boiler to STG connection steel racks for Hp steam, Ip
steam, LP steam, Auxiliary steam, Steam drains HRH and CRH system.
 BALANCE OF PLANT Pipe Rack for ASL oil system, Distillate oil system,
Raw water system, Fire water system, Potable water system,Demin
water system, service air system, Instrument air system, Service water
system, N2,H2 system, CO2 system.
 UF permeate water system, first pass Ro system, and second pass Ro
system skid structure Fabrication and Assembly.
 Oily water drain, Chemical drains underground tank Base structure and
Platform, stair, railing work.
 Non-Destructive test, pneumatic, Hydro test and EOT Crane Girder Load
test.

COMPANY : ALJABER ENGINEERING, QATAR

CLIENT : HAMAD PORT PROJECT
PROJECT : Strategic Food Security Facility Project
DESIGNATION : Quality Inspector (Piping, Fire water & chill water)
DURATION : 14th July 2018 to 16th February 2022

JOB DESCRIPTION:

 Review Contractor’s method statements, QC procedures, ITP and Quality

Plan and assist with establishing acceptable working practices for
construction activities.
 Monitor delivery of permanent materials and ensure the quality of
products /consumables materials comply with requirements of
established Standards & Specifications.
 Heat number verification with MTC as per Relevant standard.
 Preparing reports for the internal inspection and get approval from the
third party & consultant.
 Perform routine surveillance, inspection, monitoring, auditing &
assurance of Contractor’s site activities (Fabrication and Welding, NDT,
Coating and Painting) in accordance with the Projects and Contractors,
specifications, ITP, and Quality Plans.
 Ensure all the personnel employed and operating in welding and NDE
activities is duly skilled and qualified in accordance with the applicable
specifications, codes, and regulations.
 To conduct & evaluate non-destructive examinations (RT & PT) of Weld
joints as per ASME section VIII acceptance standards.
 Reviewing & Evaluating of RT films as ASME section VIII acceptance
standards.
 Implementation of approved procedures (WPS&PQR) and maintaining
quality records as per quality management system requirements.
 Prepare inspection reports, NCR, Technical quires, Weekly QA/QC
reports & Radiography log sheets.
 Maintaining Calibration Documents of Testing & Welding equipment’s.
 Conducting of Welder Qualification Tests as ASME section IX acceptance
standards.
 Periodical verification of welder qualification, qualification of NDT,
personnel, consumables as per approved procedures and specification.
 Witnessing/Reviewing of Welding Procedure Qualification and Welder
performance tests and Destructive Testing of Specimens.
 Acid cleaning (Passivation) operation the raw materials (stainless steel)
as per approved procedure.
 Documentation of completion of all inspection activities in all respect.
 Conducting Pneumatic Test as per API standard.
 Conducting Hydro Test as per API standard.
 Co-Ordinate with construction team, Client, and consultant for
smooth functioning of QA/QC activities.
 Co-Ordination in Internal and external auditing
PREVIOUS EXPERIENCE

Company : L&T (Larsen & Toubro Ltd), Gujarat.(TPI)

Client : Reliance, World’s Largest Refinery &
Petrochemical Complex, J2.
Project : Oil & Gas, (Reactor & Regenerator, FCC- Fluidized Catalystic
Cracker Unit, Shunt Down).
Designation : QC Engineer
Duration : 1st Nov 2016 to 1st JAN 2017.

JOB DESCRIPTION:
.
 Coordinate with the implementation of projects, ensuring that the
performance is in accordance with their respective scope of services and
conditions of contract.
 Provide any reports update to the projects design managers and project
managers including clients when needed.
 Coordinate aspects of projects submittal and deliverables, reviews and
approvals against contract requirements. Report and advice on
deviations from the same.
 Preparing QA/QC reports & Testing documents as per the client
requirement & company policy.
 Coordinate with the NDT technicians.
 Conducting welder qualifications as per the client requirement.
 Coordinate with the production team to maintain good quality.

PREVIOUS EXPERIENCE

Company : Ta-ChingEngg. Pvt. Ltd, Singapore (SHIPYARD)

Client : Exxon-Mobils, SAIPEM
Project : Kaombo-norte & sul project. (STORAGE TANK & PIPELINE)
Designation : Quality Inspector
Duration : August 2012 to October 2015

JOB DESCRIPTION:
 Currently working in Total Floating production storage offloading
Kaombo-norte & sul project.
 Past worked in Exxon-Mobils Floating Storage offloading vessel BANYU-
URIP Project.
 Perform QA responsibility such as ensuring quality in the processes,
prevent defects from occurring, establish a good quality management
system and assessing the adequacy.
 Preview, review and verify documents of as built drawing, isometric
 drawing, P&ID drawing and any supporting documents based on
updating latest revision.
 To execute third-party walk down with client inspector, client operation,
commissioning engineer and qc inspector to close out the piping
completion for handover to commissioning team.
 Had commissioned Bilge, Boiler, Fuel Oil & cargo oil and misc. systems.
Carry out inspection such as material inspection, fit-up, Visual,
dimensional with sub-contractors, clients/suppliers.
 UT thickness of pressure vessels, process piping and plates for
lamination. Radiography of tanks, vessels, pressure parts, prefabricated
weld joints of pipes using gamma ray. Inspected materials for boiler
components, piping, structural.
 Inspected edge preparation before welding. Prepared reports like UT,
radiography (Film evaluation), Carried out UT, PT for raw materials. To
calibrate the equipment’s periodically. A scan ultrasonic flaw detection of
butt-welded joints of process piping systems.

Personal Profile
Father’s Name : Ravi L
Date of Birth : 23.06.1991
Nationality : Indian
Gender : Male
Language Known : Tamil, English, Telugu
Passport Details
Passport Number : J3607624
Date of Issue : 01.02.2012
Date of Expiry : 01.02.2022
Declaration
I hereby declare that the information furnished above are true and correct to
the best of my knowledge and belief.
Place : Trichy Signature
Date :
(R. Dinesh kumar)