ENGINEERING GRAPHICS
QUESTION BANK -JUNE2024
1) (a)Draw an involute of a circle of 50mm diameter.Aso ,draw a tangent and normal line at any point on
the curve .
(b) Draw a hyperbola whose distance of focus from directrix is 60mm.The eccentricity is 3/2.Also draw a
tangent and normal at any point P on the curve.
2)(a) A line AB measuring 75mm long has one of its ends 50mm in front of VP and 15mm above HP.The
top view of the line is 50mm long.Draw and measure the front view.The other end is 15mm in front of VP
and is above HP,Determine the true inclinations and traces.
(b)Draw the projections of a circle of 70 mm diameter resting on the H.P on a point A of the
circumference.The plane is inclined to the H.P such that the top view of its an ellipse of minor axis
40mm.The top view of the diameter through the point A is making an angle of 450 with the VP. Draw its
projections.
3)(a) A hexagonal prism of side of base 25mm and axis 60mm rests on a corner of its base in H.P with the
axis of the prism inclined at 400 to the H.P and parallel to V.P.Draw its projections.
(b)A pentagonal prism of base side 30mm and axis length 60mm is resting on HP on its base with a side
of base is parallel to VP.It is cut by a plane inclined at 350 to HP and meets the axis at a distance 35mm
from the base.Draw the development of the lower portion of the prism.
4) (a)A solid cone of base diameter60mm and axis 80mm long,rests with its base on HP.It is cut by a
section plane perpendicular to VP.Inclined at 45 0 to HP and passing through a point on the axis 35mm
above the base.Draw the sectional top view and true shape of the section.
(b) A right circular cone of Base diameter 50mm and height 75mm is resting on its base on the ground.It
is cut by a plane perpendicular to the V.P.and inclined at 300 to the H.P The cutting plane bisects the axis
of the cone.Draw the development of the lateral surface of the truncated cone.
5(a) Draw the isometric view of a frustum cone base diameter 60mm,top of diameter 30mm and height
50mm.
(b)A pentagonal pyramid,base 20mm and height 65mm stand with its base HP,An edge of the base is
parallel to VP and nearer to it.A horizontal section plane cuts the pyramid and passes through a point on
the axis at a distance of 25mm from the apex.Draw the isometric view of the frutum of the pyramid.
(a) construct a parabola when the distance between the focus and directrix is 30mm.Also draw the
tangent and normal to any point on the curve.
(b) Develop the involute of a square of side 25mm.Also draw the tangent and normal at any point on the
curve.
2)(a) A point P is on HP and 30mm in front of VP.Another point Q is on VP and 40mm above HP.The
distance between their projectors parallel to XY line is 50mm.Find the distance between their front and
top view of the points P and Q.
(b)A pentagonal lamina of side 30mm rests on the ground with one of its sides inclined at 30 0 to VP while
the surface of the lamina is inclined at 450 to HP.Draw the projections of the lamina.
3)(a) A hexagonal pyramid of base side 35mm and axis height 65mm is resting on HP on one of its
triangular faces with its axis parallel to VP.Draw its projections.
(b)Draw the projections of a circle of 70mm Diameter resting on the H.P on A point A of the
circumference. The plane is inclined to the H.P.Such that the top view of its an ellipse of Minor axis
40mm.The top view of the diameter through the point A is making an angle of 45 0 with the V.P.Determine
the inclination of the plane with the H.P.
4) (a)A cylinder of base diameter 50mm and altitude 70mm is tilted until the axis makes an angle of 60 0
with the H.P.and parallel to V.P.Draw the projection of the cylinder.
(b) A Hexagonal pyramid of base side 25mm and axis 70mm is resting on the ground on its base edge
parallel to V.P.It is cut by two cutting planes starting from a point on the axis 35mm above the base.One is
perpendicular to V.P and parallel to H.P.and the other is perpendicular to V.P and 40 0 to the H.P Draw
sectional plan.
5(a) A pentagonal pyramid of base 30mm side and height 70mm,stands with its base on the H.P such that
one of the base edges is parallel to the V.p.It is cut by a section plane perpendicular to the V.P and inclined
at 300 to the H.P bisecting the axis. Draw the development of the surface of the cut solid.
(b)A hexagonal pyramid of base side 30mm and height 60mm rests on its base on the H.P with two of its
base edges perpendicular to the V.P It is cut by a plane perpendicular to the V.P and inclined at 35 0 to the
H.P.meeting the axis at a point 35mm above the base of the pyramid. Draw the isometric view of the
truncated pyramid.
ALL THE BEST
