Data Sheet
Ovation™ Power
Supply System(5X00785G09)
Features
▪ Redundant power configurations, each with
separate external wide-range AC or DC feeds
▪ Separate main and auxiliary supplies in both the
primary and secondary configurations
▪ Dual wide-range input capabilities
▪ Diode auctioneered power feeds
▪ High-efficiency power supplies
▪ Modular fanless systems
▪ Redundant power feeds to each controller chassis
and to the I/O modules
▪ Continuous system monitoring
Overview Benefits
Emerson has developed a DIN-rail mounted power Benefits of the Ovation power supply scheme include:
supply incorporating four modular fanless powering
▪ Separate main and auxiliary power supplies allow
systems to provide reliable and stable power to the
easy replacement
Ovation™ controller and I/O modules.
▪ Elimination of cooling fans greatly reduces failure
The Ovation controller powering system uses risks
redundant configurations, each with separate, ▪ Diode auctioneered power feeds assure
external wide-range AC and/or DC input feeds. Dual continuous power availability
diode auctioneered 24 VDC outputs are used to ▪ New design increases efficiency, reduces heat
power each controller chassis and associated I/O generation and enhances equipment life
modules, as well as loops and contact wetting to the expectancy
I/O modules. If required a 48 VDC auxiliary power for
▪ Dual input (AC and DC) capability reduces spare
loops and contact wetting can also be provided.
parts
Two separate output schemes are available: ▪ Hot-swappable power supplies enable on-line
replacement
▪ 24 VDC / 10 A / 240 W main and 24 VDC / 10 A /
▪ Quick installation of the power supplies
240 W auxiliary power
minimizes downtime and production loss
▪ 24 VDC / 20 A / 480 W main and 24 VDC / 20 A /
480 W auxiliary power ▪ Power factor correction reduces power
consumption
Page - 1
PWS_010245 [1]
Ovation™ Power Supply System Data Sheet
10-Amp Power Scheme 20-Amp Power Scheme
The 10-amp powering scheme includes: The 20-amp powering scheme includes:
▪ Redundant power supply configurations (primary ▪ Redundant supply configurations (primary and
and secondary) that contain separate 10-amp secondary) that contain separate 20 A main and
main and auxiliary power supplies and support a auxiliary power supplies that support a wide range
wide range of input voltages (85-264 VAC @ 43- of input voltages (85-264 VAC @ 43-67 Hz or 90-
67 Hz or 90-375 VDC) with an output power of 375 VDC) with an output power of 480 W.
240 W. ▪ An auctioneering diode to ensure continuous power
▪ A power distribution module that distributes diode availability
auctioneered outputs to both the controller and I/O ▪ A power distribution terminal strip
busses.
The 20-amp scheme consists of a back-plate with pre-
The 10-amp scheme consists of a back-plate with mounted DIN-rails, to which the power distribution
pre-mounted DIN-rails to which the power distribution terminals strip, auctioneering diode, circuit breakers
module, circuit breakers and four 10-amp power and four 20-amp power supplies are attached.
supplies are attached. Life expectancy of the 10-amp
power supply is 8-years @ 40°C. The 20-amp power scheme increases the power
available to the Ovation controller and I/Os to 480 W.
Life expectancy of the 20-amp power supply is 15-
years @ 40°C and 10-amp loading.
Powering Module Characteristics
10 A, 24 VDC Powering Module Characteristics (1X01046)
AC and DC Inputs
Nominal AC Input Voltage 100 - 240 VAC
AC Input Voltage Range 85 to 264 VAC
DC Input Voltage Range 90 to 375 VDC
Frequency 43 to 67 Hz
Nominal Current 3.2 – 1.0 A
Efficiency > 90% typ. (24 W)
Inrush Current (max) Typ. < 30 A
Power Factor Correction Active power factor correction to better than 0.92
Voltage Phase Type Single phase (AC voltage)
DC Outputs
Nominal Voltage 24 V (23.5 ~ 28.5 VDC adjustable)
Tolerance < ±2% overall
Initial Voltage Setting 24.5 V ± 1%
Output Ripple < 50 mVpp (20 MHz, 50 Ω)
Overvoltage Protection > 30.5 but < 33 VDC, auto recovery
Page - 2
PWS_010245 [1]
Ovation™ Power Supply System Data Sheet
10 A, 24 VDC Powering Module Characteristics (1X01046)
Power Back Immunity < 35 V
Nominal Output Current Rating 10 A (240 W)
Peak Current 1.5 x nominal current for 4 sec min while holding voltage > 20 VDC
Short Circuit Current 1.5 x nominal current at near zero volts at short circuit condition
> 20 ms (full load, 100 VAC input @ ambient temperature = +25°C (+77°F)
Hold-up Time Tolerance
> +2.0% overall
Voltage Fall Time < 150 ms from 95% to 10% rated voltage @ full load and Tamb
Time and Temperature Drift < 1.0%
EMC and Certifications
▪ EN61000-6-2: 2001
▪ EN61000-6-3: 2001
EMC Emissions ▪ EN55011 Class B, radiated emissions
▪ EN55022 Radiated conducted including Annex. A
▪ EN61000-3-2: 2001
▪ EN61000-6-1; 2001
▪ EN61000-6-2: 2001
▪ EN61000-4-2: Level 4, electrostatic discharge
▪ EN61000-4-3: Level 3, radiated immunity
▪ EN61000-4-4: Level 4 input and level 3 output, fast transient immunity
EMC Immunity ▪ EN61000-4-5: Isolation class 4, surge immunity
▪ EN61000-4-6: Level 3, conducted RF immunity
▪ EN61000-4-11: Voltage dips, variations
▪ SEMI F47 Sag immunity
▪ EN61000-4-8, EN61000-4-34
▪ IEC 61000-4-34: Voltage dip immunity standard
▪ CE Mark
▪ UL
Certifications
▪ IECEx
▪ RoHS Compliant
Environment
▪ Storage: -40°C to +85°C (-40°F to +185°F)
▪ Operation: -25°C to +60°C (-13°F to +140°F) to full power, with linear derating to half power from +60°C to +
70°C (+140°F to +158°F, - convection cooling, no forced air required. Operation up to 50% load permissible
with sideways or front side up mounting orientation.
▪ Derate: 240 W by 12 W per °C to 120 W from +60°C to +70°C
Safety
▪ Protected against continuous short-circuit, continuous overload and/or
open circuit.
General Protection/Safety
▪ Protection Class 1 (IEC536), degree of protection IP20 (IEC60529)
▪ Safe low voltage: SELV (acc. IEC60950-1)
Status Indicators Visual: 3 status LEDs (input, output, alarm)
Page - 3
PWS_010245 [1]
Ovation™ Power Supply System Data Sheet
10 A, 24 VDC Powering Module Characteristics (1X01046)
Protection Features
Fusing (input) Internally fused
▪ Outputs are capable of providing high currents for short periods of time
for inductive load startup or switching.
Outputs ▪ Fusing may be required for wire/loads if 2x nominal O/P current rating
cannot be tolerated. Continuous current overload allows for reliable fuse
tripping.
Degree of Protection IP20 (EN60529)
Casing Fully enclosed metal housing with fine ventilation grid to keep out small parts
20 A, 24 VDC Powering Module Characteristics (1X01047)
AC and DC Inputs
Nominal AC Input Voltage 100 - 240 VAC
AC Input Voltage Range 85 to 264 VAC
DC Input Voltage Range 90 to 375 VDC
Frequency 43 to 67 Hz
Nominal Current 6–3A
Efficiency > 92% (38 W)
Inrush Current (max) < 40 A
Power Factor Correction Active power factor correction to better than 0.92
Voltage Phase Type Single phase (AC voltage)
DC Outputs
Nominal Voltage 24 V (23.5 ~ 28.5 VDC adjustable)
Tolerance < ±2% overall
Initial Voltage Setting 24.5 V ± 1%
Output Ripple < 100 mVpp (20 MHz, 50 Ω)
Overvoltage Protection > 30.5 but < 33 VDC, auto recovery
Power Back Immunity < 35 V
Nominal Output Current Rating 20 A (480 W)
Peak Current 1.5 x nominal current for 4 sec min while holding voltage > 20 VDC
Short Circuit Current 1.5 x nominal current at near zero volts at short circuit condition
> 20 ms (full load, 100 VAC input @ ambient temperature (Tamb) = +25°C
Hold-up Time Tolerance (+77°F)
> +2.0% overall
Voltage Fall Time < 150 ms from 95% to 10% rated voltage @ full load and Tamb
Time and Temperature Drift < +1.0%
Page - 4
PWS_010245 [1]
Ovation™ Power Supply System Data Sheet
20 A, 24 VDC Powering Module Characteristics (1X01047)
EMC and Certifications
▪ EN61000-6-2: 2001
▪ EN61000-6-3: 2001
EMC Emissions
▪ EN55011 Class B, radiated emissions
▪ EN61000-3-2: 2001
▪ EN61000-6-1; 2001
▪ EN61000-6-2: 2001
▪ EN61000-4-2: Level 4, electrostatic discharge
▪ EN61000-4-3: Level 3, radiated immunity
EMC Immunity ▪ EN61000-4-4: Level 4 input and level 3 output, fast transient immunity
▪ EN61000-4-5: Isolation class 4, surge immunity
▪ EN61000-4-6: Level 3, conducted RF immunity
▪ EN61000-4-11: Voltage dips, variations
▪ IEC 61000-4-34: Voltage dip immunity standard
▪ CE Mark
▪ UL
Certifications
▪ IECEx
▪ RoHS Compliant
Environment
▪ Operation: -25°C to +60°C (-13°F to +140°F) to full power, with linear derating to half power from +60°C to +
70°C (+140°F to +158°F, - convection cooling, no forced air required. Operation up to 50% load permissible
with sideways or front side up mounting orientation.
▪ Derate: 480 W by 24 W per °C to 240 W from +60°C to +70°C
Safety
▪ Protected against continuous short-circuit, continuous overload and/or
open circuit.
General Protection/Safety
▪ Protection Class 1 (IEC536), degree of protection IP20 (IEC60529)
▪ Safe low voltage: SELV (acc. IEC60950-1)
Status Indicators Visual: 3 status LEDs (input, output, alarm)
Protection Features
Fusing (input) Internally fused
▪ Outputs are capable of providing high currents for short periods of time
for inductive load startup or switching.
Outputs ▪ Fusing may be required for wire/loads if 2x nominal O/P current rating
cannot be tolerated. Continuous current overload allows for reliable fuse
tripping.
Degree of Protection IP20 (EN60529)
©2018 Emerson. All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Co. Ovation ™ is a mark of one of the Emerson Automation Solutions family
of business units. All other marks are the property of their respective owners. The contents of this publication are presented for information purposes only, and while effort has been made
to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All
sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time
without notice.
Page - 5
PWS_010245 [1]
