Scribd
Upload
26 views1 page

BFM Spigot Spec Sheet 2

Uploaded by

hatrongtuan1987
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views1 page

BFM Spigot Spec Sheet 2

Uploaded by

hatrongtuan1987
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

| PRODUCT SPEC SHEET

Spigots
• BFM® spigots are available in Stainless Steel T316L and PHYSICAL PROPERTIES:
T304L, as well as C22 Hastelloy.
Stainless Steel T316L
• Available in a range of exact sizes, eliminating the Material Stainless Steel T304L or
imprecise nature of hose-clamp style connection C22 Hastelloy (limited sizes)
widths and ensuring a perfect fit with the BFM®
connector. Interior Finish ≤ 0.8Ra micro-metres
(32Ra micro-inches)
• All spigot diameters are measured at the base of the
tail. The spigot design is slightly tapered, so the OD at Wall Thickness 2.0mm / 5/64”
the top of the tail is 5mm / 13/64” greater than the base
Length (for all diameters) 89mm / 3 1/2”
• BFM® spigots have a tail 52mm (23/64”) long. These can (Head: 37mm / 1 1/2”)
be easily cut down or cut on an angle to suit your (Tail: 52mm / 2 3/64”)
existing pipework (we recommend leaving at least
AVAILABLE SIZES: (In 50mm (2”) increments)
15mm (19/32”) on the tail).
Diameter
• To enable the installation of a TR (Tool Release Ø100mm* - 1,650mm
Stainless Steel Spigots
connector, a 6mm / 15/64” hole is drilled in the top seat (Ø4” - 65“)
(also available in 125mm/5”)
of the spigot head.
Hastelloy Spigots Ø150mm - 500mm
(Ø5” - 1911/16“)

(* Ø100mm measured externally (OD) - all other diameters measured


internally (ID). Note that there is a ±2mm tolerance on the tail diameter
of all spigot sizes.)

Note: For applications where there is a possibility for static build up,
e.g. wood dust, flour, milk powder etc., we recommend using a
static dissipative wire (strip), connecting the two BFM® spigots
together.

Contact us for spigot trimming/modifications,


or transitions.

ARL PRODUCTS, LLC | EMAIL: [email protected] | WEB: flexiblefittings.com | PH: 281-203-8577


V9 JUNE 2022 PRODUCT SPEC SHEET - SPIGOTS
PAGE 1 OF 1

You might also like