INSTITUTE FOR DEVELOPMENT AND RESEARCH IN

BANKING TECHNOLOGY, HYDERABAD.

User Manual for CA Accounting Application

VERSION 1.0

Castle Hills, Road No.1, Masab Tank, Hyderabad-500 057, India

Fax: +91-40-23535157 || E-mail: [email protected]

User Manual for CA Accounting Application

 Statement of Confidentiality

This is a controlled document. Unauthorized access, copying, replication and

usage for a purpose other than for which this is intended are prohibited.

User Manual for CA Accounting Application

Abbreviations/Terms Used

Term Description

CA Certifying Authority

IDRBT Institute for Development and Research in Banking Technology

RA Registration Authority

TDS Tax Deducted at Source

GST Goods & Services Tax

DD Demand Draft

NEFT National Electronic Funds Transfer

User Manual for CA Accounting Application

 Table of Contents
1. Introduction ………………………………….................................................................... 1
2. Access to Accounting module and System Configuration………………………..……….2
3. Home page of Accounting Application ........................................................................ 3
4. Payment details .......................................................................................................... 5
4.1 Online Payments.........................................................................................................................5
4.2 Offline Payments .......................................................................................................................13
4.3 View Payment Details ...............................................................................................................20
4.3.1 Search Criteria ......................................................................................................................... 20
4.3.2 Based on Remit Date................................................................................................................ 20
4.3.3 Based on Approved Date......................................................................................................... 22
4.3.4 Based on Mode of Transaction ................................................................................................ 23
4.3.5 Based on Status....................................................................................................................... 24

5. Holiday Details ............................................................................................................ 25

5.1 Search Criteria..........................................................................................................................27
5.1.1 Based on Financial Year........................................................................................................... 27

6. Tax Details................................................................................................................. 28
6.1 Search Criteria ........................................................................................................................29
6.1.1 Based on Effective Date (To know tax on a particular Date) …………………………...……….............. 29

7. Reports....................................................................................................................... 31
7.1 Generate Reports......................................................................................................................31
7.1.1 Payment Report....................................................................................................................... 32
7.1.2 Certificate Report..................................................................................................................... 33
7.2 Generate Proforma Invoice .........................................................................................................33
8. Certificate Details...........................................................................................................35
8.1 Certificate Cost.............................................................................................................................36
8.2 Detailed Certificate Cost..............................................................................................................38
8.3 View Certificate Details.................................................................................................................38
8.3.1 Search Criteria.............................................................................................................................. 39
8.3.2 Based on Accounting Date .......................................................................................................... 39
8.3.3 Based on Certificate Class .......................................................................................................... 40
8.3.4 Based on Certificate Type............................................................................................................ 41
8.3.5 Based on Issue Type..................................................................................................................... 42
8.3.6 Based on Refund Status ............................................................................................................... 44
8.3.7 Based on Request Date ................................................................................................................45
9. Profile ............................................................................................................................ 47
10. Logout.......................................................................................................................... 48

User Manual for CA Accounting Application

1

1. Introduction

As part of the CA Application, IDRBT introduced CA Accounting module for the convenience of
the IDRBT RAs, subscribers and subscribers for which IDRBT is acting as RA. The under
mentioned are the main features of this module.

• Payment details of certificates procured

• Online payment facility.
• Offline payment facility.
• Payment history of the bank.
• Amount Balance of a specific bank.
• View status of payment details
• Search criteria
• Tax details
• Generate Reports
o Payment Report
o Certificate Report
o Pro-forma invoice
• Profile
• Certificate details
• List of IDRBT Holidays

This CA Accounting application is designed to ensure bank’s request to issue DSC will be
processed based on its positive balance in CA Accounting Application. RA’s and subscribers for
which IDRBT is acting as RA should make payment in favour of IDRBT and enter the payment
details in Accounting Application and apply for Certificate.

The subscriber should login to CA Application and click on “Accounting” link to access CA
Accounting Application.

User Manual for CA Accounting Application

2

The subscriber will be redirected to Home page of CA Accounting Application in a new window as
shown in below screen.

The below sections describe various functionalities available in the Accounting Application.

2. Access to Accounting module and System Configuration

All the users will be able to access accounting module on https://10.0.67.39 (through INFINET
connectivity, port number 443). By enabling this configuration in the firewall users will be able to
access CA Accounting module seamlessly.

Similarly, users will be able to access CA Services over INTERNET connectivity using URL:
https://services.idrbtca.org.in and for accounting module https://epay.idrbt.org.in.

Our Accounting module is compatible in following configurations:

User Manual for CA Accounting Application

3

Operating System OS Bit Browser Browser Bit

Windows 8 64 IE10 32
Windows 8 64 IE10 64
Windows 8.1 64 IE11 32
Windows 8.1 64 IE11 64
Windows 10 64 IE11 32
Windows 10 64 IE11 64
Windows 10 32 IE11 32

In case of any issue, users may share the screenshots to [email protected] to troubleshoot the
issue through INFINET:
1) Error screenshot
2) telnet 10.0.67.39 443,
3) tracert 10.0.67.39 and
4) ping 10.0.67.39
5) your INFINET IP
6) Windows Version
7) IE Version

3. Home page of Accounting Application

Two types of accounting balances are maintained for the banks are shown in this page.

• UnCleared Balance
• Cleared Balance

This page displays the Cleared / UnCleared balances of the Institute/Bank available with IDRBT CA
Accounting. This screen shows the balances of the Institute/Bank present with IDRBT CA, for the
subscriber logged in.

User Manual for CA Accounting Application

4

UnCleared Balance: This is the amount, which is added by the subscriber/bank, once the
payment is done to IDRBT CA through NEFT/Cheque. (Details of payment information entry will
be shown in below sections)

Once this amount is entered and submitted, the payment details will be sent to IDRBT CA
subscriber for verification and Approval. After, verification and approval process activities are
successfully completed, the amount will be moved to Cleared Balance.

Cleared Balance: This is the amount present for the Institute/Bank, from which certificate cost
will be deducted.

This screen shown below describes the same.

User Manual for CA Accounting Application

5

Note: In every page of CA Accounting Application, logged in Subscriber details are shown as
(User Id) and Subscriber RA Code. The below screen shows the same.

4. Payment details
This section explains the procedure to enter payment details and to view the status of the payment
history. Subscriber can enter their payment details through Online or Offline mode. Below figure
displays the 3 activities which a subscriber can do in ‘Payment Details’ module.

1. Online Payment
2. Offline Payment
3. View Payment Details

4.1 Online Payments

Using Online Payment method, the subscriber can make online payment through SBIePay
Application. SBIePay is in the business of providing Payment Gateway Aggregation services
including NEFT and Internet Banking. The below screen shows the link to enter the Online Payment
Details.
User Manual for CA Accounting Application
6

On clicking Online Payment link, the below Online Payment Entry page will be displayed.

For Online Payment, some Fields are auto-populated according to the subscriber profile.
Subscriber needs to provide inputs in other fields as mentioned below.

Field Value

RA Code This will auto-populate according to the login subscriber.

Institution This will auto-populate according to the login subscriber.

GSTIN This will auto-populate from the profile details of the login subscriber.

Address This will auto-populate from the profile details of the login subscriber.

Total Amount* This is a mandatory field. Total Amount is inclusive of TDS Amount
i.e. Total Amount =Remit Amount + TDS Amount.

User Manual for CA Accounting Application

7

Subscriber to click on Yes/No (Radio button).

In case TDS is filed by subscriber, then click Yes. Then some
TDS*
additional fields for TDS details need to be entered. Above screen is
displaying the fields for TDS details i.e., TDS Amount, TDS Date.

In case of no TDS, clink No.

Remit Amount This Amount is exclusive of TDS Amount i.e. Remit Amount=Total
Amount- TDS Amount. This will be sent to Payment Gateway for
debiting respective bank a/c and crediting IDRBT CA bank a/c.

*Mandatory field

Note: After providing the TDS details, Remit Amount Field will be auto-populated accordingly.

Below screen displays the action taken in Online Payment page after providing the inputs.
Subscriber can click on Submit or Reset the inputs or view all the integrated bank list.

Submit: This button will submit the entered payment details.

Reset: Subscriber can reset the fields by clicking on the ‘Reset’ button.
Integrated Bank List: By clicking on this button, subscribers can view all the banks list.

On clicking Submit button, Subscriber will be redirected to Confirm Online Payment page of IDRBT
CA Accounting Application. In this page subscriber should verify the details. (i.e, Order Number,
Payment Owner Id, RA Code, Institution Name, GSTIN, Remit Amount, Remit Amount in words,
Remit date, in case of TDS Included then TDS Date, TDS Amount and Total Amount) as shown in

User Manual for CA Accounting Application

8

the below screen. After checking/verifying the details subscriber can confirm or cancel the Payment
details.

On clicking Cancel button, subscriber will be redirected to Online Payment Entry page.
On clicking Confirm button, subscriber will be redirected to the payment gateway (i.e. SBIePay)
portal, where the transaction will be processed. Below screen is displaying the SBIePay portal page,
where subscriber can select the banks from the drop-down list for the payment. Subscriber can click
on ‘Pay now’ or ‘Cancel’ button.

On clicking Cancel button, subscriber web page will be redirected to Online Payment Details
page of IDRBT CA Accounting Application as shown in below screen.

User Manual for CA Accounting Application

9

Note:

 Status of the transaction in IDRBT CA Accounting Application will be “Fail-

Pending for Verification”.
 Status of the transaction in Payment Gateway (SBIePay) will be “FAIL” and description
will be “Subscriber Cancel Transaction”.
 After doing Double Verification with in a definite time (5 min) interval the status will be
changed to “Transaction Failed” in CA Accounting Application.

On clicking Pay Now button, one popup of Transaction summary will be displayed which will ask
to ‘Pay Now’ or ‘Cancel’ the transaction. Subscriber can check the Transaction summary details
as shown in the below screen and can pay accordingly.

On clicking Cancel button in popup of Transaction summary, subscriber web page will be
redirected to Online Payment Details page of IDRBT CA Accounting Application as shown in
above screen.

User Manual for CA Accounting Application

10

On clicking Pay Now button, subscriber web page will be redirected to respective bank’s Net Banking
website. Here the subscriber needs to select the corporate banking and login with respective
corporate bank account credentials. After login into the respective bank’s application subscriber will
be shown a screen for transaction confirmation. Once transaction is confirmed, response will be sent
to SBIePay page and then to Online Payment Details page of IDRBT CA Accounting Application and
status of the payment will be displayed as shown in below screen.

Note:

 Status of the transaction in IDRBT CA Accounting Application will be “Success-

Pending for Verification”.
 Status of the transaction in Payment Gateway (SBIePay) will be “SUCCESS”.

User Manual for CA Accounting Application

11

After Double Verification the status will be changed to “Transaction Successful” in CA Accounting
Application as shown in below screen.

The status “Transaction Successful” indicates that the transaction has been approved by IDRBT
CA and Accounting has been done i.e. respective virtual a/c balance has been updated as per
IDRBT CA guidelines. Subscriber will be shown Back, New Payment and Download Tax Invoice
buttons in Online Payment Details page.

User Manual for CA Accounting Application

12

On clicking Back button, subscriber web page will be redirected to Payment Details Listing
page of IDRBT CA Accounting Application.

On clicking New Payment button, subscriber web page will be redirected to Online Payment
Entry page of IDRBT CA Accounting Application.

On clicking Download Tax Invoice button, Tax Invoice Report will be downloaded if
Accounting done successfully for the transaction as shown in below screen otherwise
respective message will be shown.

Note:

 The status “Transaction Settled” indicates that the amount remitted through this
transaction has been credited to IDRBT CA a/c.

User Manual for CA Accounting Application

13

4.2 Offline Payments

The subscriber can enter the transaction details of the payment done to IDRBT CA in
Accounting Application. The below screen shows the link to enter the Offline Payment Details.

Once the above link is clicked, the below payment details page is displayed.

The fields in this page are described below:

 Total Amount*: It is the sum of Remittance Amount and TDS Amount (If Present)
 TDS*: Tax Deducted at Source, If TDS is filed, then click on Yes as shown below:

User Manual for CA Accounting Application

14

Here additional fields need to be entered by the subscriber if TDS is checked as Yes. Those fields

 TDS Amount*: Amount for TDS

 TDS Date*: Date on which TDS is deducted.
 Remit Amount: Amount remitted to the IDRBT CA Account.
In case of no TDS, click on No as shown below.

 Remittance Date*: Remittance Date of the Transaction. Here screen shows the entry of
Remittance Date.

User Manual for CA Accounting Application

15

 Mode of Transaction*: It is the mode by which the payment is done. The below screen
shows the same.

 Transaction Reference Number*: Subscriber should enter the transaction reference of the
payment.

User Manual for CA Accounting Application

16

 IDRBT CA A/C No*: The account in which the payment is credited.

 Payment Description: Here the subscriber can enter any information related to payment
that needs to be shared with CA.
*Mandatory field

If all details are proper, then click on “Submit” button. Subscriber will be given a pop-up like -
“Rs xxx.xx/- declared as TDS in Total amount” as shown below.

After clicking on “Submit” button subscriber can re-check all the details entered are correct or not.

If subscriber wants to change anything, click on “Go Back” button. If all details are correct,
then click on “Confirm” button as shown below.

User Manual for CA Accounting Application

17

After clicking on “Confirm” Button subscriber will be given a pop-up like- “Payment added
successfully. Check Status in payment listing.”

Subscriber can see this payment details in “Payment Details Listing” page with the status “To be
verified”.

User Manual for CA Accounting Application

18

Payment details >> View Payment details >> Payment Details Listing

4.3 View Payment Details

To view the details of payments, entered by the subscriber earlier, go to Payment Details >> View

Payment Details. (As shown below)

After clicking on “View Payment Details” link, subscriber will be redirected to the “Payment
Details Listing” page where subscriber can see all the Payments.
User Manual for CA Accounting Application
19

In “Payment Details Listing”, page subscriber can see Remit Amount (INR), Remit Date, Approved
Date, Transaction Status and Mode of Transaction for each payment entry. To know further details
of the payment click on the Transaction Status. The below screen shows the details.

Click on “Back” button, to view Payment Details Listing screen.

User Manual for CA Accounting Application

20

4.3.1 Search Criteria

Search Criteria is given based on “Remit Date”, “Approved Date”, “Mode of Transaction” and
“Status” as shown below.

4.3.2 Based on Remit Date

To search the payment entries based on Remit Date-

Select “Remit Date” from the drop down of “Search On”, then select date to search on. Exp: 21-Mar-

2017

User Manual for CA Accounting Application

21

After selecting date, click on “Submit” button. Then subscriber will be shown all the payments,

which were Remitted on selected date. (i.e., 21-Mar-2017)

Subscriber can click on “Reset” button to come out of the Search Criteria.

User Manual for CA Accounting Application

22

4.3.3 Based on Approved Date

To search the payment entries based on Approved Date-

Select “Approved Date” from the drop down of “Search On”, then select a date to

search. Ex: 21-Jun-2016

After selecting date, click on “Submit” button. Then subscriber will be shown all the payments
which were approved on selected date. (i.e., 21-Jun-2016)

Subscriber can click on “Reset” button to come out of the Search Criteria.

User Manual for CA Accounting Application

23

4.3.4 Based on Mode of Transaction

To search the payment entries based on Mode of Transaction-

Select “Mode of Transaction” from the drop down of “Search On”, then select any one from the
list (NEFT, DD, CHEQUE, TDS, REFUND and REFUND FOR CERTIFICATE) on which
subscriber wants to search.

Select any one Mode of Transaction from the list & click on “Search” button, then subscriber will
be shown all the payments, which were made through, selected Mode of Transaction.
Ex: NEFT

User Manual for CA Accounting Application

24

Likewise, subscriber can search based other Modes of Transactions like DD, CHEQUE, TDS,
REFUND, REFUND FOR CERTIFICATE.

Subscriber can click on “Reset” button to come out of the Search Criteria.
4.3.5 Based on Status
To search the payment entries based on Status-

Select “Status” from the drop down of “Search On”, then select any one from the list (To be Verified,
To be Approved, Approved, Rejected, Refunded, SentBack) on which subscriber wants to search.

Select any one Status from the list & click on “Search” button, then subscriber will be shown all the
payments with the selected Status.

Ex: Approved

User Manual for CA Accounting Application

25

Likewise, subscriber can search based other Status like “To be Verified”, “To be Approved”,
“Rejected”, “Refunded”, “SentBack”.

Subscriber can click on “Reset” button to come out of the Search Criteria.

5. Holiday Details
Subscriber can view the holidays of IDRBT CA, by using the link shown below.

After clicking on “View Holiday Details” link subscriber will be redirected to the “Holidays” where
subscriber can see the list of Holidays for IDRBT CA.
In the “Holidays” Page subscriber can see Holiday Date, Holiday Day & Holiday Description for
each Holiday.

User Manual for CA Accounting Application

26

On selection of date, subscriber can see the details of the particular holiday as shown below.

User Manual for CA Accounting Application

27

5.1 Search Criteria

5.1.1 Based on Financial Year

Subscriber can search based on “Financial Year”. Select “Financial Year” from the dropdown of

“Search on “. After Selecting “Financial Year”, select year from the drop down of value. Exp: 2016

User Manual for CA Accounting Application

28

After clicking “Search” button, subscriber will be shown all the Holidays from the selected financial
year.

6. Tax Details
In this module, the subscriber can view the details of the Service Tax applied on certificates. To view
the tax details, subscriber should click on the link “View Tax Details” as shown below.

After clicking on “View Tax Details” link, the subscriber will be redirected to the “Service Tax Listing”
page where subscriber can see the list of Service Tax Details.

In the “Service Tax Listing” page subscriber can see Tax Effective From Date, Tax Effective To
Date and Tax (%) for each entry.

User Manual for CA Accounting Application

29

To view the detailed tax components for an entry, subscriber can click on “Tax Effective from Date”
link, which will redirect to below page as shown below.

Click on Back button for going back to Tax Listing screen.

6.1 Search Criteria

6.1.1 Based on Effective Date (To know tax on a particular Date):

In Search criteria subscriber will be given an option to search based on “Effective Date”.

User Manual for CA Accounting Application

30

To search based on “Effective Date”, select “Effective Date” from drop down of “Search On”

Then, pick a date from date picker as shown in the figure. Exp: 21-Mar-2017

After clicking on Search button, subscriber will be shown the Service Tax Percentage on selected
date.

User Manual for CA Accounting Application

31

7. Reports
For reporting purpose, few reports were provided to subscriber under this module. Subscriber
can see the link for Generate Reports and Generate Proforma Invoice in menu as shown in the
below screen.

7.1 Generate Reports

After clicking on “Generate Reports” link subscriber webpage will be redirected to “Generate
Reports” page.

User Manual for CA Accounting Application

32

In “Generate Reports” page subscriber can see “Report Type” dropdown that contains “Payment
Report” and “Certificate Report” as shown in below figure.

7.1.1 Payment Report

Then subscriber will be shown “From Date” & “To Date” fields. Pick “From Date” as shown in the

figure Ex: 6-Mar-2017

While selecting “From Date” subscriber can observe future dates are disabled.

After selecting “From Date”, pick “To Date” of the Report. While selecting “To Date”
subscriber can observe future date and all the dates previous to “From Date” are disabled.

User Manual for CA Accounting Application

33

After selecting “From Date” & “To Date” click on “Submit” button. Report will be generated and
subscriber will be shown a pop-up asking for “Open” or “Save” the Report.

7.1.2 Certificate Report

To generate “Certificate Report”, follow “Generate Payment Report” procedure but select
“Certificate Report” from the “Report Type” dropdown and select “From Date” and “To Date” and
click on “submit” button.

7.2 Generate Proforma Invoice

In this module the subscriber can find a link to generate Proforma Invoice. On clicking given
“Generate Proforma Invoice” link subscriber webpage will be redirected to Proforma Invoice Form
page as shown in the below figure.

User Manual for CA Accounting Application

34

Subscriber should cross verify the shown GSTIN and Address shown in Proforma Invoice Form
page. Subscriber also given dropdown lists for Environment, Issue Type, Certificate Class,
Certificate Type, Validity and Quantity for each product. Subscriber can add or delete a product
details by clicking on Add or Delete buttons respectively.

Fie Sample
Environment Production or Preproduction
Issue Type Fresh Issue, Reissue or Renewal
Certificate Class Class One, Class Two or Class Three
Certificate Type Signing, System, Encryption, SSL, OCSP, Code Signing or Time
Validity 0-30, 31-90, 91-180, 181-365 or 366-730 days
In this field Subscriber should give the number certificate of
Quantity
above type by selecting any value from 1 to 9999 as given
in dropdown.
Note: All fields are mandatory

After selecting all products details, subscriber should click on Submit button given in Proforma
Invoice Form page then subscriber will be shown all the calculations and amounts related to
balances & GST as shown in below figure.

User Manual for CA Accounting Application

35

Here subscriber should verify the shown details like Institution Name, GSTIN, Address, Rate,
Quantity, Amount, Total Amount Before Tax, Total Amount After Tax and Total Amount After Tax
in Words. If all the shown details are proper, then subscriber can click on Confirm button to
generate Proforma Invoice Report. In case subscriber wants to change product details then click
on the Cancel button.

8. Certificate Details
In this module the subscriber can find the details of certificate costs, and details of certificates
requested by the subscriber. In Certificate Details subscriber can see links for Certificate Cost,
Detailed Certificate Cost and View Certificate Cost.

User Manual for CA Accounting Application

36

8.1 Certificate Cost

To view the cost of a certificate, the subscriber should click on the link “Certificate Cost”.
After clicking on “Certificate Cost” link, subscriber will be redirected to the “Cost Details” page as
shown below.

To get the cost details subscriber have to provide Certificate Root, Certificate Class, Certificate
Type, Issue Type & Validity as shown below.

User Manual for CA Accounting Application

37

After selecting all the fields click on “Get Cost” button, then Cost of the certificate will be shown
the in new window as shown below.

Subscriber can change the certificate cost parameters (Root, Class, Certificate Type, Issue Type &
Validity) and corresponding cost will be shown.
Click on “Close” button to close the Cost window.

Note: Here cost refers to cost of single certificate for the details provided.

User Manual for CA Accounting Application

38

8.2 Detailed Certificate Cost

To view the cost of the certificates in an excel format, click on the link “Detailed Certificate Cost”.
Once the subscriber clicks on the link an excel sheet “CostDetail.xlsx“ will be downloaded. In this
file, subscriber can see Certificates Cost Details of Corresponding RA type to which subscriber
belongs to.

8.3 View Certificate Details

To view Certificate Details of the subscriber which are approved by the CA Team, go to
“Certificate Details” >> “View Certificate Details”.

After clicking on “View Certificate Details” subscriber will be redirected to “Certificate Details” page
where subscriber can see accounted Certificates details.

User Manual for CA Accounting Application

39

In “Certificate Details” page subscriber can see Certificate Request Number, Refund status, Site
Type, Issue Type, Certificate Class, Certificate Type, Certificate Cost (INR), Tax(INR), Total(INR),
Request Date, Accounting Date, Validity (in Days) for each certificate record. Subscriber can also
see Search Criteria on certificate details.

8.3.1 Search Criteria

Search Criteria is given based on Accounting Date, Certificate Class, Certificate Type, Issue
Type, Refund Status & Request Date.

8.3.2 Based on Accounting Date

To search in Certificate details based on Accounting Date subscriber has to-

Select “Accounting Date” from the drop down of “Search On”, then a date from the drop down of
“value” as shown in below figure.

User Manual for CA Accounting Application

40

Exp: 15-Mar-2017

After selecting date, click on “Submit” button. Then subscriber will be shown all the certificates
details which were accounted on selected date.(i.e., 15-Mar-2017)

Subscriber can click on “Reset” button to come out of the Search Criteria.

8.3.3 Based on Certificate Class

To search in Certificate details based on Certificate Class subscriber has to-

Select “Certificate Class” from the drop down of “Search On”, followed by any one Class from the
list (CLASS ONE, CLASS TWO & CLASS THREE) as shown in the following figure.

User Manual for CA Accounting Application

41

Select any one class from the list & click on “Search” button, then subscriber will be shown all
the Certificates details with the selected Class as shown in the following figure.

Exp: CLASS TWO

Likewise, subscriber can search for other classes.

Subscriber can click on “Reset” button to come out of the Search Criteria.
8.3.4 Based on Certificate Type
To search in Certificate details based on Certificate Type subscriber has to-

User Manual for CA Accounting Application

42

Select “Certificate Type” from the drop down of “Search On”, followed by any one Certificate Type
from the list (Signing, System, Encryption, SSL & OCSP).

Select any Certificate Type from the list & click on “Search” button, then subscriber will be shown
all the Selected Type Certificates details.

Exp: Signing

Likewise, subscriber can search for other Types of Certificates.

Subscriber can click on “Reset” button to come out of the Search Criteria.

8.3.5 Based on Issue Type

To search in Certificate details based on Certificate Issue Type subscriber has to-

User Manual for CA Accounting Application

43

Select “Certificate Type” from the drop down of “Search On”, followed by any one Certificate
Issue Type from the list (Fresh Issue, Reissue or Renewal).

After clicking on “Search” button, subscriber will be shown all the Certificates with

Selected Issue Type. Exp: Fresh Issue

Likewise, subscriber can search for other Types of Certificates.

Subscriber can click on “Reset” button to come out of the Search Criteria.

User Manual for CA Accounting Application

44

8.3.6 Based on Refund Status

To search Certificate details based on Refund Status subscriber has to-

Select “Refund Status” from the drop down of “Search On”, followed by any one status from the
list (Refundable, To be Verified, To be Approved & Refunded) on which subscriber wants to
search.

Select any one Status from the list & click on “Search” button, then subscriber will be shown all
the Certificates details with the selected Refund Status.

Exp: Refundable

User Manual for CA Accounting Application

45

Likewise, subscriber can search based other Status like, To be Verified, To be Approved &
Refunded. Subscriber can click on “Reset” button to come out of the Search Criteria.

8.3.7 Based on Request Date

To search in payment entries based on Request Date-

Select “Request Date” from the drop down of “Search On”, then select a date to search. Exp: 15-
Mar- 2017

After selecting date, click on “Submit” button. Then subscriber will be shown all the certificates
which were Requested on selected date.(i.e : : 15-Mar-2017)

User Manual for CA Accounting Application

46

Subscriber can click on “Reset” button to come out of the Search Criteria.

User Manual for CA Accounting Application

47

9. Profile
Subscriber can view and update profile in CA Accounting Application by clicking on Profile link
given menu. On clicking Profile link subscriber webpage will be redirected to View Profile page
as shown in below figure.

To update profile, subscriber can click on Edit Profile button given in View Profile Page. On
clicking Edit Profile button, subscriber will be shown a form to update Mobile number, Mail id,
GSTIN and Address as shown in below figure.

After filling the form subscriber can click on Update Profile button to save the Updated Profile.

User Manual for CA Accounting Application

48

10. Logout
To logout subscriber from the accounting application, click on “Logout” link in menu.

After clicking on “Logout” link subscriber will be shown pop-up with the message – “Do you want
to close the tab?”

*******************************END***********************************

User Manual for CA Accounting Application