We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2
Sr. No.
Description Unit Quantity Rate Amount
Demolishing of existing Gate Pillers along with Foundation 1 Ea 2.0 12500 25,000 and Removal of Existing MS Gate Excavation: Excavation over areas in any kind of soil for foundations including watering, dressing and disposal of 2 surplus material outside the site area, complete in all Cft 3,264.0 15 48,960 respects as per drawings and specifications to the entire satisfaction of site incharge. Back Filling: Providing ,laying and compaction of Back Filling including watering and compaction in layers not 3 exceeding 6 inch compacted thickness by using the Cft 3,712.5 18 66,826 borrowed local sand from the local nearby site, as directed by the entire satisfaction of the Engineer in charge. Plain Cement Concrete : Providing and laying cement concrete 1:4:8 under foundations using ordinary Portland cement, lawerancepur sand & Sargodha aggregate i/c 4 consolidation, curing, etc., complete in all respects as per Drawings and Specifications and to the entire satisfaction of Consultant. Under Footing Cft 227.2 450 102,236 RCC (3000 Psi) : Providing, laying, vibrating, compacting, finishing and curing etc. straight ,vertical cast in situ reinforced cement concrete , 3000 Psi minimum cylinder crushing strength at 28 days, mix using Ordinary Portland Grey Cement, fine aggregate 100% clean pure and Course 5 aggregate 3/4 '' down graded with approved quality admixture by Imp orient, vibrating through electro mechanical vibrators, placing of all pipes and embedded items before concreting curing finishing complete but excluding the cost of steel reinforcement complete in all respect as per drawings and as directed by the Consultant / Engineer in charge RCC Foundation Cft 385.00 580 223,300 RCC Column, 1:1.5:3 Cft 288.00 620 178,560 RCC Beam Cft 785.00 645 506,325 Steel Reinforcement: Providing fabricating, laying, fixing, Mild Steel deformed bars (non-TMT) conforming to ASTM specifications A-615. including cost of cutting, bending, placing, bended annealed binding wire 18 gauge, removal of 6 Kg 3,500.0 270 945,000 rest from bars if any, overlaps, chairs, sports, spacers, wastage, etc. Complete in all respects by an approved source of best quality. and duly approved directed by the entire satisfaction of the Engineer in charge. Piller Motives with Cement Sand Plaster and Gypsum 7 Ea 8.0 85,000 680,000 Moulding if Necessary Cement plaster 1:3 upto 20' (6.00 m) height, 3/4" Thick 8 Sft 1,789.4 70 125,261 (20mm) Thick 9 Cement Plaster including Rockwall Sft 1,789.4 105 187,887 Providing And Applying Of 2 Coats Of Weather Sheild Of 10 Approved Paint/Venderos As Per Directed By Engineer Sft 1,789.4 45 80,523 Complete In All Respect. Isntallation Of Sign Board As Per Instructed By Engineer Or 11 Sft 193.0 2500 482,500 Shown In Drawings Complete In All Respect 12 Provn For Electrical Work (Conduit, Wiring, Lighting etc) LS 1.0 285000 285,000 Provn For Misc Exp, Installation of MS Railing, Lane Marking 13 LS 1.0 32500 32,500 and Installation of Cat Eyes 14 Provn For Landscape and Civil Work in Central Median LS 1.0 47500 47,500 15 NDU Entrance Sculpture LS 1.0 65000 65,000 Providing and Fixing New Foldable Gate (20'-0" x 8'-0") complete in all aspect as per drawings and as directed by the Consultant 16 [Excavation, RCC Foundation, Columns, Stone Veneer, Gate 331 sft 1400.00 463,008 Lighting, Signage, MS Gate, 14 Guage MS Box Pipe, Gate Automation]