Unisonic Technologies Co., LTD: Earth Leakage Current Detector
Unisonic Technologies Co., LTD: Earth Leakage Current Detector
, LTD
M54134 LINEAR INTEGRATED CIRCUIT
DESCRIPTION
The UTC M54134 is a semiconductor integrated circuit
developed for use in high-speed earth leakage breakers
incorporating functions to protect against voltage surges and
inverter noise.
FEATURES
* Improvement of ability against unwanted tripping by
lightning-surge and lightning impulse.
Two times counting system adopted.
* Improvement of ability against unwanted tripping by
inverter-noise.
Built-in operational amplifier (of low current dissipation) for active
low-pass filter.
Improved high-frequency, high harmonic superposition
performance
* Internal time delay function
* An external capacitor is used to set the delay time.
* High input sensitivity: VT=11.5mVrms Typ.
* Low-current dissipation (at RIREF=180kΩ)
In stand-by condition: IS=610μA Typ.
* High stabilities design
Adopt the circuits that is not affected by fluctuations of supply
voltage/ambient temperature.
ORDERING INFORMATION
Ordering Number
Package Packing
Lead Free Halogen Free
M54134L-S16-R M54134G-S16-R SOP-16 Tape Reel
M54134L-S16N-R M54134G-S16N-R SOP-16N Tape Reel
MARKING
www.unisonic.com.tw 1 of 7
Copyright © 2023 Unisonic Technologies Co., Ltd QW-R122-011.E
M54134 LINEAR INTEGRATED CIRCUIT
PIN CONFIGURATION
PIN DESCRIPTION
PIN NO. PIN NAME DESCRIPTION
1 GND Grounding
Pin for connecting resistor that sets constant current for internal circuits; approx. 1.3
2 IREF
V.
3 VCC Output pin of the internal constant-voltage circuit. Connect decoupling capacitor.
Leakage input signal does not continue.
Leakage is detected and SCR turn on.
4 OFFC
In these cases, this IC will be restored to the initial condition after a predetermined
time. Connect capacitor that determines restore time.
Pin for connecting capacitor that integrates signal output from discriminator of
5 TRC1
leak-signal input level.
6 TRC2 Pin for connecting capacitor to eliminate noise.
7 DLYC Pin for connecting capacitor that sets delay time in case of using delay function.
8 SCRT Output pin for driving a SCR.
9 VREF Pin for providing input reference level of leakage detection. About 2.4V appears.
10 ILKI Other input pin of leakage detection.
11 OPAO Output pin of operational amplifier.
Pin for connecting capacitor that prevents abnormal oscillations. Connect capacitor
12 C2
across IC at pins 11 and 12.
13 OPI- Negative input pins of operational amplifier
Pin for connecting capacitor that prevents noise from causing malfunction. Connect
14 C1
capacitors across IC at pins 13 and 14 and across IC at pins 15 and 14.
15 OPI+ Positive input pins of operational amplifier
16 VS Power supply
BLOCK DIAGRAM
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all UTC products described or contained herein.
UTC products are not designed for use in life support appliances, devices or systems where malfunction
of these products can be reasonably expected to result in personal injury. Reproduction in whole or in
part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to
make changes to information published in this document, including without limitation specifications and
product descriptions, at any time and without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.