DS19264-1 192 x 64 dots white led backlight

ABSOLUTE MAXIMUM RATINGS MECHANICAL DATA

Item Symbol Min. Max. Unit Item Nominal Dimensions Unit
Supply Voltage(Logic) VDD - VSS -0.3 7.0 V Module Size ( W x H x T ) 100.0 x 60.0 x 12.5 mm
Supply Voltage(LCD) VDD - VO -0.3 19.0 V Viewing Area ( W x H ) 84.0 x 31.0 mm
Input Voltage VI -0.3 VDD + 0.3 V Dot Pitch ( W x H ) 0.41 x 0.41 mm
Operating Temp. Topr -20 70 °C Dot Size ( W x H ) 0.37 x 0.37 mm
Storage Temp. Tstg -30 80 °C Weight Approx. 80 g

ELECTRICAL CHARACTERISTICS ( V DD =5V±0.25V ) PIN CONNECTIONS

Test Min. Typ. Max. Unit
Item Symbol Condition Pin Symbol Level Function
Input High Voltage VIH -- 2.0 -- V DD V 1 DB7 H/L
Input Low Voltage VIL -- - 0.3 -- 0.8 V 2 DB6 H/L
Output High Voltage VOH IOH = - 0.2mA 2.4 -- V DD V 3 DB5 H/L
Output Low Voltage VOL IOL = 1.6mA 0 -- 0.4 V 4 DB4 H/L
Data bus line
Supply Current I DD VDD = 5.0V -- 7.0 10.0 mA 5 DB3 H/L
LCD Driving Voltage VDD - VO Ta=25° C -- 12.7 -- V 6 DB2 H/L
7 DB1 H/L
8 DB0 H/L
BLOCK DIAGRAM _
9 E H,H >L Enable Signal
10 R/W H/L H : Read L : Write
64 COM
S6B0107 LCD PANEL 11 RS H/L H : Data L : Instruction code
192 x 64 dots 12 VO -- Operating voltage for LCD
or Eqv.
13 V DD +5V Power supply for logic
64 SEG 64 SEG 64 SEG 14 VSS 0V GND
VDD 15 CSA H/L Chip selection signal A
Power To LSI
VSS S6B0108 S6B0108 S6B0108
or Eqv. or Eqv. or Eqv. 16 CSB H/L Chip selection signal B
VO Circuit
VOUT IC1 IC2 IC3 17 VOUT -10V Output voltage for LCD driving
18 /RST L Reset signal, active "L"
19 LEDA +5V
DB0 DB7 Power supply for LED backlight
RS, R/W, E, /RST 20 LEDK 0V
CSA
CSB LED BACKLIGHT SPECIFICATIONS (Ta=25° C)
CSB CSA Selection
Item Symbol Typ. Max. Unit
0 0 IC1
LEDA 0 1 IC2 Forward Voltage Vf 3.1 3.3 V
LEDK LED Backlight
1 0 IC3 Forward Current If 45 -- mA
1 1 None
LED Color White

Electronics Katrangi Trading

www.ekt2.com Made in China