University of Santo Tomas - Legazpi

College of Engineering, Architecture, and Fine Arts

Tectonic Plates in Asia

Prepared by:

BALATUCAN, JOHN MARK C.

BSCE 2A3

CE224: Geology for Civil Engineers

Submitted to:

Engr. Keren Dy Angustia

 University of Santo Tomas - Legazpi
College of Engineering, Architecture, and Fine Arts

I. INTRODUCTION

As introduced by Meteorologist Alfred Wegner the Continental Drift theory states that

there is one massive continent composed of the present islands and continents around the globe.

Almost all of Earth's landmasses were part of Pangea, a supercontinent that existed in early

geologic times. Panthalassa, the global ocean that encircled Pangea, was completely assembled

by the Early Permian Epoch, which occurred between 299 and 273 million years ago. According

to J. Rafferty, 2024, Plate tectonics has replaced Wegener's antiquated theory of continental

drift, which proposed that Earth's continents were formerly united to form the supercontinent

Pangea, which persisted for the majority of geologic time, as the mechanism for the breakup of

Pangea. Due to plate tectonics, the vast, unyielding plates that makeup Earth's outer shell, or

lithosphere, move apart at oceanic ridges, come together at subduction zones, or slip past one

another along fault lines. Seafloor spreading patterns suggest that Pangea did not split into

pieces all at once, but rather broke apart into smaller pieces over time. The theory of plate

tectonics also suggests that throughout Earth's geologic past, the continents combined and

separated several times.

Approximately 180 million years ago, the Atlantic Ocean between North America and

Africa's northwest and the Indian Ocean between Africa and Antarctica were the first oceans to

originate from the breakup. About 140 million years ago, when Africa broke away from South

America, the South Atlantic Ocean opened. The central Indian Ocean was formed in the same

period as Antarctica and Australia split off from India. Finally, North America broke away from

Europe about 80 million years ago, Australia started to rift away from Antarctica, and India broke
 University of Santo Tomas - Legazpi
College of Engineering, Architecture, and Fine Arts

away from Madagascar. The Himalayas were created when India and Eurasia finally clashed

some 50 million years ago. The tectonic plates are categorized into three names; Major plates

(primary), Minor plates (secondary), and Microplates (tertiary) which differ from each other in

terms of size (km). Focusing on the continent of Asia where vast natural resources and huge

geological discoveries. It is also divided into many tectonic plates as part of the Plate Tectonic

movements theorem, it is constantly moving every time. The evidence of its movements is the

representation of the mountain ridges, volcanoes, submerging land masses, and other

geological properties caused by the movements of the plates.

II. DISCUSSION

The continent of Asia is composed of distinct plates which are the Eurasia plate,

Filipino plate, Indian plate, Arabian plate, and Sunda plate. These plates posed a large mass

and perimeter in Asia, constantly moving. Over time, the Asian plate's arrangement has

undergone substantial alteration. The northern portion of the Philippine Sea Plate was situated

close to the equator in the Eocene, some 50 million years ago. At that time, it experienced a

clockwise 90° revolution on a 23°N/162°E Euler pole, and for the next 25 million years, it moved

northward. It was about where it is now, and rotation had stopped, around 15 Ma ago. (Yamazaki

et al, 2010) "As the India Plate drifted northwards, rotated, and collided with Eurasia at an oblique

angle, transform forces along the newly created subduction front caused the bending of the

Sunda arc. Later, in the Oligocene ~32 Ma ago, further faulting developed and the Burma and

Sunda plates began to break off from Eurasia." (Zahran et al, 2007) The collision and

convergence of these plates result in various tectonic activities such as earthquakes, volcanic
 University of Santo Tomas - Legazpi
College of Engineering, Architecture, and Fine Arts

eruptions, and the formation of mountain ranges. The Himalayas, for example, continue to grow

taller due to ongoing tectonic activity. Asia experiences significant seismic hazards due to its

complex tectonic setting. Earthquakes are frequent in regions like Japan, Indonesia, China, and

the Himalayan region. These seismic events can have devastating consequences on human

settlements and infrastructure.

Figure 1. Geological Map of Tectonic Plates Movements in Asia

The Sunda Plate, Burma Plate, Okhotsk Plate, Eurasian Plate, and Pacific Plate

are all interconnected tectonic features. The northernmost Okhotsk plate has a velocity of

25mm/year relative to the Eurasian plate, with convergent boundaries connecting it to the

Philippine Sea and Amur plates. The Philippine Sea plate has a relative velocity of 51mm/year
 University of Santo Tomas - Legazpi
College of Engineering, Architecture, and Fine Arts

with subduction occurring along its border. The Marianas plate moves 25mm/year. relative to the

Eurasian plate, while the Burma plate has a velocity of 44mm/year at 15°. The Sunda plate, with

a velocity of 11mm/year at 91.8°, is larger than the other plates.

Figure 2. Globe Map of Tectonic Plates in Asia (E. Fitzhenry, 2014)

The Andaman and Nicobar island chains, northern Sumatra, and the Andaman

Ocean Basin comprise the Burma microplate, which is primarily composed of oceanic crust. In

a region of the world that is quite active in terms of plate tectonics, the Burma microplate is

surrounded by the Australian, Sunda, Indian, and Eurasian plates. The Sunda trench, where the

overriding Burma microplate is subducting beneath the Indian plate, is located on the western

flank. The Australian plate is located to the south, and the Sunda plate is to the east. The Burma

plate is classified as a sliver plate because of the oblique convergence on either side of the plate,

which gave it its peculiar shape. (A. Haugan, n.d.)

The Himalaya (the Indian plate) was raised due to the Indian plate colliding with

Asia around 50 million years ago, and the Asian plate's crustal thickening in Tibet intensified.
 University of Santo Tomas - Legazpi
College of Engineering, Architecture, and Fine Arts

The Cretaceous island arc sequence (Kohistan-Dras arc) and thrust sheets of ophiolites

(Tethyan oceanic crust and mantle) were deposited southward onto the Indian continental edge

before the collision. The collision between India and Asia characterized by the following events:

the Indian plate's northward velocity abruptly decreased; marine sedimentation ended along the

collision zone, the Indus—Yarlung Tsangpo suture zone; continental sedimentation began along

the suture zone and the Tethyan Himalaya to the south; and subduction-related calc-alkaline

magmatism ended along the southern margin of Asia (Ladakh—Gangdese granite batholith).

(M. Searle, 2021)

Figure 3. Map of the boundaries of South Asia Plates

The Sunda Plate, also called the Sunda land Block, is encircled on all sides

by tectonically active convergent boundaries, beneath which the Indo-Australian Plate subducts

to the south and the Philippine Sea Plate to the east. The rather gradual collision between the
 University of Santo Tomas - Legazpi
College of Engineering, Architecture, and Fine Arts

Sunda Plate and the Eurasian Plate, of which the Sunda land Block was formerly thought to be

a component, defines the Sunda Plate's northern limit (Baroux, 1998). According to Kroker

(2012), this specific area of Southeast Asia is among the planet's most seismically active and

tectonically complex locations. There is a rise in differential tensions within the Indo-Australian

Plate as a result of the northward-moving plate colliding with the Eurasian Plate and slowing

down in comparison to its northward migration and collision with the southern edge of the Sunda

Plate.

The tectonic peculiarity of the Philippine Sea plate is that nearly all of its boundaries

are convergent. While the west/northwest portion of the Philippine Sea plate is subducting

beneath the continental Eurasian plate, the Pacific plate is subducting beneath the Philippine

Sea plate to the east. The Australian plate to the south and the Okhtosk plate to the north form

the shorter borders of the Philippine Sea plate. There are additional transform faults close to

Taiwan and the Philippine trench. According to Smoczyk et al. (2013), the Philippine Sea plate

is moving relative to the Eurasian plate at a rate of about 80 mm/yr. This means that earthquakes

and tsunamis are more likely to occur soon. The thickness of the plate varies throughout, with

values around the Nankai trough calculated by Yoshioka and Ito (2001) to range from 29 to 41

km. They propose that differences in thickness are influenced by the formation process and the

age of the sea floor.

 University of Santo Tomas - Legazpi
College of Engineering, Architecture, and Fine Arts

Figure 4. Philippine Sea Plate Boundaries

The Okhotsk plate is situated on the western edge of Asia, covering the

Kamatchka Peninsula, Sakhalin Island, and the northern half of Japan in addition to the Okhotsk

Sea. Although it was once thought to be a component of the North American plate, more recent

studies have revealed that it travels independently and is a different plate (Sakurai et al. 2006).

The Ulakhan Fault, a transform fault that is left-lateral (or sinistral) in nature, separates the North

American plate from the Okhotsk plate. This fault's westernmost segment is linked to a triple

junction where the Okhotsk, Eurasian, and North American plates converge, compressing the

region and creating a more complex environment. According to Hindle et al. (2009), several NW-

SE trending strike-slip faults divide this NW region of the plate into several faulting blocks.
 University of Santo Tomas - Legazpi
College of Engineering, Architecture, and Fine Arts

Figure 5. Active Plate Tectonic Boundary Movement in East Asia

The various geological characteristics, seismic activity, and geological dangers

found in Asia are a result of these plate tectonic processes. Studying the region's geology,

seismic risk, and tectonic evolution requires an understanding of these movements. Derive to

the understanding about the process and conclude how things come together such as the

Himalayas and the Tibetan Plateau were formed as a result of significant tectonic processes in

Asia between the Indian and Eurasian plates. Earthquakes and volcanic arcs result from the

Pacific Plate boundary subducting beneath other plates. The lateral motion between the plates

is accommodated by transform boundaries, such as the Kunlun Fault in western China and the

Altyn Tagh Fault. Tectonic plate movement is creating rift zones, like the East African Rift, where

rift valleys and new ocean basins are being formed. Asia's geological evolution is also influenced

by internal plate tectonic deformation.

 University of Santo Tomas - Legazpi
College of Engineering, Architecture, and Fine Arts

III. REFERENCE

Das, S., & Filson, J., On the tectonics of Asia, Earth and Planetary Science Letters, Volume

28, Issue 2, 1975, Pages 241-253, ISSN 0012-821X, https://rb.gy/sgtcsq

Fitzhenry, E., (2014). Tectonics of Asia., EPSC 350 - Tectonics, McGill University,

https://tectonicsofasia.weebly.com/

Britannica, The Editors of Encyclopaedia. "Pangea". Encyclopedia Britannica, 13 Feb. 2024,

https://www.britannica.com/place/Pangea

Searle, M., et al, (2021) India: Asia Collision and Tibet, Encyclopedia of Geology (Second

Edition), Academic Press, Pages 486-493, ISBN 9780081029091,

https://doi.org/10.1016/B978-0-12-409548-9.12493-5.

Kroker, H. 2012. October 17th. Überraschung im Indischen Ozean.

http://www.planeterde.de/wissen/ueberraschung-im-indischen-ozean

Baroux, E., et al. 1998. Slip-partitioning and fore-arc deformation at the Sunda Trench

Indonesia. Terra Nova, vol. 10, 139-144. Doi: 10.1046/j.1365 3121. 1998. 00182.x

Seno, T., T. Sakurai, and S. Stein (1996), Can the Okhotsk Plate be discriminated from the

North American Plate? J. Geophys. Res., 101(B5), 11305–11315, doi:10.1029/96JB00532