MITSUBISHI

S12A2-PTA SPECIFICATION SHEET DIESEL ENGINES

GENERAL ENGINE DATA Used for 750kVA generator

Type 4-Cycle, Water Cooled
Aspiration Turbo-Charged, After Cooler
(Jacket water to Cooler)
Cylinder Arragement 60oV
No.of Cylinders 12
Bore mm(in.) 150 (5.91)
Stroke mm(in.) 160 (6.30)
Displacement liter(in3) 33.93 (2071)
Compression Ratio 14.5:1
Dry Weight - Engine only - kg(lb) 2920 (6439)
Wet Weight - Engine only - kg(lb) 3140 (6924)
PERFORMANCE DATA
Steady State Speed Stability Band at any Constant Load
Hydraulic (std.) or Electric Governor - % ±0.25 or better
Maximum Overspeed Capacity - rpm 2400
Moment of inertia of Rotating Components - kgf m2(lbf ft2) 37.7 (895)
(Includes Std.Flywheel)
Cyclic Speed Variation with Flywheel at 1800rpm 1/569
1500
1500rpm
rpm 1/335
1200rpm 1/214
ENGINE MOUNTING
Maximum Bending Moment at Rear Face of Flywheel Housing - kgf m(lbf ft) 200 (1447)
AIR INLET SYSTEM
Maximum Intake Air Restriction (Includes piping)
With Clean Filter Element - mm H2O (in.H2O) 400 (15.7)
With Dirty Filter Element - mm H2O (in.H2O) 635 (25.0)
EXHAUST SYSTEM
Maximum Allowable Back Pressure - mm H2O (in.H2O) 600 (23.6)
LUBRICATION SYSTEM
Oil Pressure at ldle - kgf/cm2(psi) 2 3 (29 43)
at Rate Speed - kgf/cm2(psi) 5 6 (71 86)
Maximum Oil Temperature - oC(oF) 110 (230)
Oil Capacity of Standard Pan High - liter (U.S.gal) 100 (26.4)
Low - liter (U.S.gal) 80 (21.1)
Total System Capacity (lncludes Oil Filter) - liter (U.S.gal) 120 (31.7)
Maximum Angle of lnstallation (Std. Pan) Front Down 9.5o
(Engine Only) Front Up 11o
Side to Side 22.5o
COOLING SYSTEM
Coolant Capactiy (Engine only) - liter (U.S.gal) 100 (26.4)
Maximum External Friction Head at Engine Outlet - kgf/cm2(psi) 0.35 (5.0)
Maximum Static Head of Coolant above Crankshaft Center - m(ft) 10 (32.8)
Maximum Outlet Pressure of Engine Water Pump - kgf/cm2(psi) 1.7 (24.3)
Standard Thermostat (modulating)Range - oC(oF) 65 85 (149 185)
Maximum Coolant Temperature at Engine Outlet - oC(oF) 98 (208)
Minimum Coolant Expansion Space - % of System Capacity 10
Maximum Coolant Temperature at Intercooler lnlet, TK type - oC(oF)
Maximum Air Restriction on Discharge Side of Radiator and Fan - mm H2O(in.H2O) 10 (0.4)

APPLICATION : GENERATOR
Pub. No. T13-0303-E
Jun. '99 Printed in Japan
 MITSUBISHI
S12A2-PTA SPECIFICATION SHEET DIESEL ENGINES

FUEL SYSTEM
Fuel Injector Bosch P Type × 2
Maximum Suction Head of Feed Pump - mm Hg (in. Hg) 75 (3.0)
Maximum Static Head of Return & Leak Pipe - mm Hg (in.Hg) 150 (5.9)
STARTING SYSTEM
Battery Charging Alternator - V- Ah 24-25
Starting Motor Capacity - V - kW 24-6.0 × 2
Maximum Allowable Resistance of Cranking Circuit - m 1.5
Recommended Minimum Battery Capacity
At 5oC (41oF) and above - Ah 300
Below 5oC (41oF) through - 5oC (23oF) 500

The specifications are subject to change without notice.

 MITSUBISHI
S12A2-PTA SPECIFICATION SHEET DIESEL ENGINES
ENGINE RATING
All data represent net performance with standard accessories such as air cleaner, inlet /exhaust manifolds, fuel oil system,
L.O. pump, etc. under the condition of 29.38 in. (746 mm) Hg barometric pressure, 85oF(29.4oC) ambient temperature and
0.38 in.(9.7mm) Hg vapor pressure.

ITEM UNIT STAND-BY POWER PRIME POWER

60Hz 50Hz 60Hz 60Hz 50Hz 60Hz
Engine Speed rpm 1800 1500 1200 1800 1500 1200
No. of Cylinders 12

Bore mm 150
(in.) (5.91)
Stroke mm 160
(in.) (6.30)
Displacement liter 33.93
(in.3) (2071)
Brake Horse power without Fan HP 1140 1000 800 1020 910 730
(kW) (850) (746) (597) (761) (679) (545)
Brake Mean Effective Pressure kgf/cm2 17.0 17.9 17.9 15.2 16.3 16.4
without Fan (psi) (242) (255) (255) (216) (232) (233)
Mean Piston Speed m/s 9.6 8.0 6.4 9.6 8.0 6.4
(ft/min) (1890) (1575) (1260) (1890) (1575) (1260)
Maximum Regenerative Power HP 125 91 63 125 91 63
Absorption Capacity without Fan (kW) (93) (68) (47) (93) (68) (47)
Intake Air flow m3/min 74 63 53 65 57 48
(CFM) (2613) (2225) (1871) (2295) (2013) (1695)
Exhaust Gas Flow m3/min 195 167 141 173 152 127
(CFM) (6885) (5897) (4979) (6109) (5367) (4484)
Coolant Flow liter/min 1100 1000 840 1100 1000 840
(U.S. GPM) (291) (264) (222) (291) (264) (222)
Coolant Flow to Intercooler liter/min
(TK only) (U.S. GPM)
Cooling Air Flow m3/min 1380 1140 870 1380 1140 870
(Std. Fan) (CFM) (48728) (40253) (30720) (48728) (40253) (30720)
Fan Loss Horse Power HP 40 30 20 40 30 20
(Std. Fan) (kW) (30) (22) (15) (30) (22) (15)
Radiated Heat to Ambient kcal/hr 55466 47430 40147 49315 43161 36188
(BTU/min) (3668) (3137) (2655) (3262) (2855) (2393)
Heat Rejection to Coolant kcal/hr 462213 395250 334560 410958 359678 301563
(BTU/min) (30570) (26141) (22127) (27180) (23789) (19945)
Heat Rejection to Inter Cooler kcal/hr
(TK Version) (BTU/min)
Heat Rejection to Exhaust kcal/hr 599939 496886 450386 529297 452166 400255
(BTU/min) (39679) (32863) (29788) (35007) (29906) (26472)
Noise Level (1 m height & distance) dB(A) 103 100 97 103 100 97
(excludes, lntake,Exhaust & Fan)

The specifications are subject to change without notice.

APPLICATION : GENERATOR
Pub. No. T13-0303-E
Oct. '97 Printed in Japan
 MITSUBISHI
S12A2-PTA SPECIFICATION SHEET DIESEL ENGINES
ENGINE RATING
All data represent net performance with standard accessories such as air cleaner, inlet /exhaust manifolds, fuel oil system,
L.O. pump, etc. under the condition of 29.38 in. (746 mm) Hg barometric pressure, 85oF(29.4oC) ambient temperature and
0.38 in.(9.7mm) Hg vapor pressure.

ITEM UNIT STAND-BY POWER PRIME POWER CONTINUOUS C CONTINUOUS D

60Hz 50Hz 60Hz 60Hz 50Hz 60Hz 60Hz 50Hz 60Hz 50Hz
Engine Speed rpm 1800 1500 1200 1800 1500 1200 1800 1500 1800 1500
No. of Cylinders 12

Bore mm 150
(in.) (5.91)
Stroke mm 160
(in.) (6.30)
Displacement liter 33.93
(in.3) (2071)
Brake Horse power without Fan HP 1140 1000 800 1020 910 730 860 780 760 690
(kW) (850) (746) (597) (761) (679) (545) (642) (582) (567) (515)
Brake Mean Effective Pressure kgf/cm2 17.0 17.9 17.9 15.2 16.3 16.4 12.9 14.0 11.4 12.4
without Fan (psi) (242) (255) (255) (216) (232) (233) (183) (199) (162) (176)
Mean Piston Speed m/s 9.6 8.0 6.4 9.6 8.0 6.4 9.6 8.0 9.6 8.0
(ft/min) (1890) (1575) (1260) (1890) (1575) (1260) (1890) (1575) (1890) (1575)
Maximum Regenerative Power HP 125 91 63 125 91 63 125 91 125 91
Absorption Capacity without Fan (kW) (93) (68) (47) (93) (68) (47) (93) (68) (93) (68)
Intake Air flow m3/min 75 64 53 67 58 48 56 50 49 44
(CFM) (2648) (2260) (1871) (2366) (2048) (1695) (1977) (1766) (1730) (1554)
Exhaust Gas Flow m3/min 197 170 141 177 154 127 147 132 131 116
(CFM) (6956) (6003) (4979) (6250) (5438) (4484) (5191) (4661) (4626) (4096)
Coolant Flow liter/min 1100 1000 840 1100 1000 840 1100 1000 1100 1000
(U.S. GPM) (291) (264) (222) (291) (264) (222) (291) (264) (291) (264)
Coolant Flow to Intercooler liter/min
(TK only) (U.S. GPM)
Cooling Air Flow m3/min 1380 1140 870 1380 1140 870 1380 1140 1380 1140
(Std. Fan) (CFM) ###### ###### ###### ###### ###### ###### ###### ###### ###### ######
Fan Loss Horse Power HP 40 30 20 40 30 20 40 30 40 30
(Std. Fan) (kW) (30) (22) (15) (30) (22) (15) (30) (22) (30) (22)
Radiated Heat to Ambient kcal/hr 56163 48348 40147 50251 43718 36188 41842 37473 37210 33149
(BTU/min) (3715) (3198) (2655) (3324) (2891) (2393) (2767) (2478) (2461) (2192)
Heat Rejection to Coolant kcal/hr 468027 402900 334560 418761 364319 301563 348687 312273 310080 276242
(BTU/min) ###### ###### ###### ###### ###### ###### ###### ###### ###### ######
Heat Rejection to Inter Cooler kcal/hr
(TK Version) (BTU/min)
Heat Rejection to Exhaust kcal/hr 616683 518918 450386 551769 465532 400255 452585 399028 405541 352986
(BTU/min) ###### ###### ###### ###### ###### ###### ###### ###### ###### ######
Noise Level (1 m height & distance) dB(A) 105 102 99 103 100 97 101 99 101 98
(excludes, lntake,Exhaust & Fan)

The specifications are subject to change without notice.

APPLICATION : GENERATOR
Pub. No. T13-0303-E
Jun. '99 Printed in Japan
 MITSUBISHI
S12A2-PTA SPECIFICATION SHEET DIESEL ENGINES
ENGINE RATING
All data represent net performance with standard accessories such as air cleaner, inlet /exhaust manifolds, fuel oil system,
L.O. pump, etc. under the condition of 29.38 in. (746 mm) Hg barometric pressure, 85oF(29.4oF) ambient temperature and
0.38 in.(9.7mm) Hg vapor pressure.

EMERGENCY
ITEM UNIT STAND-BY POWER PRIME POWER CONTINUOUS C CONTINUOUS D
POWER

60Hz 60Hz 50Hz 60Hz 60Hz 50Hz 60Hz 60Hz 50Hz 60Hz 50Hz
Engine Speed rpm 1800 1800 1500 1200 1800 1500 1200 1800 1500 1800 1500
No. of Cylinders 12

Bore mm 150
(in.) (5.91)
Stroke mm 160
(in.) (6.30)
Displacement liter 33.93
(in.3) (2071)
Brake Horse power without Fan HP 1186 1140 1000 800 1020 910 730 860 780 760 690
(kW) (885) (850) (746) (597) (761) (679) (545) (642) (582) (567) (515)
Brake Mean Effective Pressure kgf/cm2 17.7 17.0 17.9 17.9 15.2 16.3 16.4 12.9 14.0 11.4 12.4
without Fan (psi) (252) (242) (255) (255) (216) (232) (233) (183) (199) (162) (176)
Mean Piston Speed m/s 9.6 9.6 8.0 6.4 9.6 8.0 6.4 9.6 8.0 9.6 8.0
(ft/min) (1890) (1890) (1575) (1260) (1890) (1575) (1260) (1890) (1575) (1890) (1575)
Maximum Regenerative Power HP 125 125 91 63 125 91 63 125 91 125 91
Absorption Capacity without Fan (kW) (93) (93) (68) (47) (93) (68) (47) (93) (68) (93) (68)
Intake Air flow m3/min 78 75 64 53 67 58 48 56 50 49 44
(CFM) (2754) (2648) (2260) (1871) (2366) (2048) (1695) (1977) (1766) (1730) (1554)
Exhaust Gas Flow m3/min 207 197 170 141 177 154 127 147 132 131 116
(CFM) (7309) (6956) (6003) (4979) (6250) (5438) (4484) (5191) (4661) (4626) (4096)
Coolant Flow liter/min 1100 1100 1000 840 1100 1000 840 1100 1000 1100 1000
(U.S. GPM) (291) (291) (264) (222) (291) (264) (222) (291) (264) (291) (264)
Coolant Flow to Intercooler liter/min
(TK only) (U.S. GPM)
Cooling Air Flow m3/min 1380 1380 1140 870 1380 1140 870 1380 1140 1380 1140
(Std. Fan) (CFM) (48728) (48728) (40253) (30720) (48728) (40253) (30720) (48728) (40253) (48728) (40253)
Fan Loss Horse Power HP 40 40 30 20 40 30 20 40 30 40 30
(Std. Fan) (kW) (30) (30) (22) (15) (30) (22) (15) (30) (22) (30) (22)
Radiated Heat to Ambient kcal/hr 58792 56163 48348 40147 50251 43718 36188 41842 37473 37210 33149
(BTU/min) (3888) (3715) (3198) (2655) (3324) (2891) (2393) (2767) (2478) (2461) (2192)
Heat Rejection to Coolant kcal/hr 489937 468027 402900 334560 418761 364319 301563 348687 312273 310080 276242
(BTU/min) (32404) (30955) (26647) (22127) (27696) (24096) (19945) (23062) (20653) (20508) (18270)
Heat Rejection to Inter Cooler kcal/hr
(TK Version) (BTU/min)
Heat Rejection to Exhaust kcal/hr 650277 616683 518918 450386 551769 465532 400255 452585 399028 405541 352986
(BTU/min) (43008) (40787) (34321) (29788) (36493) (30790) (26472) (29933) (26391) (26822) (23346)
Noise Level (1 m height & distance) dB(A) 105 105 102 99 103 100 97 101 99 101 98
(excludes, lntake,Exhaust & Fan)

The specifications are subject to change without notice.

APPLICATION : GENERATOR
Pub. No. T13-0303-E
Jun. '00 Printed in Japan