ESV09CRS-B2 ESM09CRR-B3

ESV12CRS-B2 ESM12CRR-B3
ESV09CRR-C6 ESM18CRR-B3
ESV09CRR-C7

EN AIR CONDITIONER USER MANUAL 2

2 www.electrolux.com

CONTENTS
1. SAFETY INSTRUCTIONS..................................................................................... 3
2. PRODUCT DESCRIPTION.................................................................................... 5
3. INDOOR UNIT DISPLAY....................................................................................... 6
4. REMOTE CONTROLLER...................................................................................... 6
5. REMOTE CONTROLLER DESCRIPTION.............................................................. 8
6. HOW TO USE THE REMOTE CONTROLLER..................................................... 11
7. HOW TO USE THE INDOOR UNIT..................................................................... 17
8. OPERATING TEMPERATURE............................................................................. 18
9. EMERGENCY OPERATION................................................................................ 18
10. CLEANING AND MAINTENANCE....................................................................... 18
11. OPERATION TIPS............................................................................................... 21
12. TROUBLESHOOTING........................................................................................ 23
13. CORRECT DISPOSAL OF THIS PRODUCT........................................................ 24

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings
with it decades of professional experience and innovation. Ingenious and stylish, it has been
designed with you in mind. So whenever you use it, you can be safe in the knowledge that
you’ll get great results every time.

Welcome to Electrolux.

Visit our website to:

Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com

Register your product for better service:

www.electrolux.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number

Warning / Caution-Safety information.

General information and tips
Environmental information.

Subject to change without notice.

 ENGLISH 3

1. SAFETY INSTRUCTIONS

Before the installation and use of the • Installation work must be performed
appliance, carefully read the supplied in accordance with the national wiring
instructions. The manufacturer is not standards and the electricity suppliers
responsible if an incorrect installation and service rules by authorised personnel
use causes injuries and damages. Always only.
keep the instructions with the appliance • If the unit is to be moved to another
for future reference. location or disposed of, only a suitably
qualified person is permitted to
undertake such work.
1.1 Children and vulnerable
people safety • If you notice an unusal situation, such
as a burning smell, please switch off
WARNING! the power to the air conditioner and
Risk of suffocation, injury or contact an Electrolux service agent. If
permanent disability. this abnormal status continues the air
conditioner may be damaged or even
cause electric shock or fire.
• This appliance can be used by
children aged from 8 years and above • Do not operate the air conditioner with
and persons with reduced physical, wet hands. This may cause electric
sensory or mental capabilities or lack of shock.
experience and knowledge if they have • Do not damage or cut off the power
been given supervision or instruction cord or other wires. If this occurs,
concerning use of the appliance in a please have it repaired or replaced by
safe way and understand the hazards an accredited technician.
involved. • Do not connect this air conditioner to a
• Children shall not play with the multi outlet power board.
appliance. • Please switch off the power supply to
• Cleaning and user maintenance shall the air conditioner if it is not to be used
not be made by children without for an extended period. Otherwise, it
supervision. will accumulate dust and may cause a
fire.
1.2 Installation and Use • Before cleaning the air conditioner,
please disconnect the power supply
WARNING! in order to eliminate the possibility of
Risk of suffocation, injury or electric shock.
permanent disability. • The power supply should be matched
with the air conditioner. Air conditioners
• Contact an authorised installer for provided with a supply cord should
installation of this unit. be connected directly to a power
outlet with a suitable safety switch. Air
• Contact an authorised service
conditioners that are hard wired must
technician for repair or maintenance of
be connected to a suitable safety circuit
this unit.
breaker.
• The socket outlet required to supply
• Please ensure that the power supply
power must be connected and
to the air conditioner is stable and
commissioned by a licenced contractor.
meets the requirements set out in the
• If the supply cord is damaged, it must installation manual.
be replaced by the manufacturer, its
• Always ensure the product is installed
service agent or similarly qualified
with appropriate earthing.
persons in order to avoid a hazard.
4 www.electrolux.com

• For safety, be sure to turn off the • Do not step on the top of the outdoor
circuit breaker before performing any unit or place heavy things on it. It may
maintenance or cleaning or when the cause damage or injury.
product is not used for an extended • Do not attempt to repair the air conditioner
period of time. Accumulated dust may by yourself. Incorrect repairs may cause
cause re or electric shock. electric shock or re. Please contact your
• Select the most appropriate local authorised service centre.
temperature. It can save electricity. • Do not insert your hands or objects into
• Do not keep windows and doors open the air inlet or outlet. It may cause injury.
for a long time during operation. It will • Do not expose animals or plants directly
result in insuf cient performance. to the airflow.
• Do not block the air inlet or outlet. It will • Do not use the unit for any other
result in insuf cient performance and purpose, such as preserving food or
cause malfunctions. drying clothes.
• Keep combustible materials away from • Do not splash water on the air conditioner.
the units at least 1meter. It may cause It may cause electric shock or malfunction.
re.

Conformed to the stipulation on permissible content limitation

of some hazardous & restricted chemical substances.
RoHS (RoHS compliant)
compliant (According to the Circular No. 30/2011/TT-BCT, Vietnam,
dated 10 th August, 2011)
 ENGLISH 5

2. PRODUCT DESCRIPTION

All the pictures in this manual are for explanation

purposes only. The actual shape of the indoor unit
you purchased may be slight different on front
panel and display window. The actual shape shall
prevail.

Air inlet
3 4 2 1

13

5 Air Outlet 6 8 7

11
Air inlet (side) 12
9 Air inlet (rear)

10

14

15
Air outlet
16

1 Front panel 9 Remote controller

2 Digital display 10 Remote controller Holder (some units)
3 Air filter 11 Refrigerant pipe
4 Pre-dust filter 12 Drain hose
5 Horizontal air flow louver 13 Power cable (some units)
6 Vertical air flow louver (inside) 14 Mounting plate
7 Manual control button 15 Connecting cable
8 Ion generator (if applicable) 16 Power cable (some units)
6 www.electrolux.com

3. INDOOR UNIT DISPLAY

1 2 3 4 5 6 7
1 On/Off indication lamp
Lights up when the unit is work.
2 Heat mode indication lamp
Lights up when Heat mode is activated.
3 Cool mode indication lamp
4 3 2 Lights up when Cool mode is activated.
4 Temperature indication lamp
• Displays the setting or room temperature
when the unit is operational.
• Displays the malfunction code when fault
5 1 occurs.
• Displays the function code when some
4 function is activated.
5 Wireless indication lamp
Lights up when Wireless function is activated.
6 Dry mode indication lamp
Lights up when Dry mode is activated.
7 Timer indication lamp
Lights up when Timer function is activated.
For some models, we do not have
the display in the indoor unit, only with
the lights to show the work status.

4. REMOTE CONTROLLER

4.1 How to use the Remote

controller • The air conditioner will not
operate if curtains, doors or
1. Keep the remote controller where its other materials block the signals
signal can reach the receiver of the from the remote controller to the
indoor unit. indoor unit.
2. When operate the air conditioner, make • Prevent any liquid from falling
sure the remote controller is pointing to into the remote controller. Do not
the signal receiver of the indoor unit. expose the remote controller to
direct sunlight or heat.
3. When the remote controller sends out
a signal, the symbol will blink in the • If the infrared signal receiver on
display of the remote controller. the indoor unit is exposed to
direct sunlight, the air conditioner
4. The indoor unit will acknowledge the
may not function properly. Use
signal with a beep sound when it
curtains to prevent the receiver
receives the signal from the remote
being exposed to sunlight.
controller.
• If other electrical appliances react
5. Please press the button of the remote
to the remote controller, either
controller and resend the signal if you
move these appliances or consult
did not hear a beep sound from the
your local dealer.
indoor unit.
 ENGLISH 7

4.2 Location of the Remote Controller

• Keep the remote controller where its
signal can reach the receiver of the
indoor unit (a maximum distance of
8 m is allowed).
• When the remote controller sends
out a signal, the symbol will blink
on the display. The indoor unit will
Max. 8m acknowledge the signal with a beep
sound when it receives an effective
signal.

4.3 Battery installation/replacement

• Remove the back cover from the
remote controller, exposing the
battery compartment and insert two
new alkaline dry batteries (2x AAA 1.5
Volt). Make sure that the polarity of (+)
or (-) is installed correctly.
• Slide the battery compartment cover
back on.

• When changing batteries, do

not use old or varied ones,
otherwise, it may cause
problems with the remote
controller.
• If the remote controller is not
used for a long time, remove
the batteries as old batteries
may leak or corrode and
damage the remote controller.
• If the remote controller does
not operate normally, please
remove and refit the batteries. If
abnormal operation continues,
replace with new batteries.
8 www.electrolux.com

5. REMOTE CONTROLLER DESCRIPTION

16
17

18

19

20

1 10
2
3 11

4 12
5
13
6
14
7
15
8

1. MODE BUTTON feedback received by the indoor

Press the button to set the operation unit when you press the button.
mode: Auto, Cool, Dry, Heat and Fan.
Default setting: AUTO. 4. TURBO BUTTON
In COOL or HEAT mode, press the button
• For Cooling only models, there is to enable or disable the turbo function.
no HEAT mode available.
If the turbo function is enabled, the unit
will operate at turbo speed to cool or heat
2. ON/OFF BUTTON rapidly so that the ambient temperature
Press the button to switch on or off the
approaches the set temperature as soon
unit.
as possible.
3. SWING BUTTON 5. TIMER BUTTON
Press this button to stop or start vertical
Press the button to set the timer function
louver movement or set the desired left/
for switching on/off the unit.
right air flow direction.
• For the models without Swing 6. I FEEL BUTTON
Left/Right function, there is no
 ENGLISH 9

Press the button to enable or disable the I 14. HEALTH BUTTON

Feel function. Press the button to enable or disable
Health function. Default setting: OFF.
7. I CLEAN BUTTON • For models with Wireless
Press the button to enable or disable the I function, continuous pressing
Clean function. Default setting: OFF. Health button 8 times in 10s to
enter the Wireless binding status.
8. X-FAN BUTTON
Press the button to enable or disable
X-Fan function. Default setting: OFF. 15. LIGHT BUTTON
Press the button to switch the display of
the indoor unit on or off. Default setting:
9. / BUTTON ON.
Press the button to increase/decrease the
temperature.
Temperature range: 16-32 °C (60-90 °F). 16. MODE DISPLAYS
Displays the current selected mode.
In Timer function, use the button to set the Including Auto, Cool, Dry, Heat and Fan.
timer adjustment.
• For Cooling only models, there is
no HEAT mode available.
10. SPEED BUTTON
Press the button to set the fan speed:
Low, Mid, High and Auto. Default setting: 17. FAN SPEED DISPLAYS
Auto. Displays the selected fan speed: Low,
Mid, High, Auto and Turbo when you
active Turbo function.
11. SWING BUTTON
Press this button to stop or start horizontal
louver movement or set the desired up/ 18. TIMER AND TEMPERATURE
DISPLAYS
Displays when the Timer function is
12. I FAVOR BUTTON enabled.
Press the button to enable I Favor Displays the Set/Room temperature in °C
function. or °F.

13. SLEEP BUTTON 19. ON/OFF AND SWING

Press the button to enable or disable
Sleep function. Default setting: OFF. DISPLAYS
Displays when Remote Controller is on or
This is ideal for the users to use while off.
sleeping.
Displays when active the Swing function.

20. FEATURE DISPLAYS

Displays when the chosen feature is
enabled.
• See section “How to use the remote controller“ for the the functions description
in details.
10 www.electrolux.com

6. HOW TO USE THE REMOTE CONTROLLER

Ensure the unit is plugged in and power is available. The OPERATION indicator on
the display panel of the indoor unit illuminates.

Basic Operation
1. Press the ON/OFF button (A) to start
the air conditioner.
2. Press the MODE button (B) to select
Auto, Cool, Dry, Fan or Heat mode.
3. Press the / button (C) to
set the desired temperature. The
temperature can be set in 1ºC
increments. Keep the button pressed
for two seconds to accelerate the
process.
4. Press the FAN SPEED button (D) to
select the fan speed.
C 5. Press the ON/OFF button (A) to turn
the air conditioner off.
B D • In the Auto mode, the air
A conditioner can logically
choose the mode of Cool,
Fan, and Heat by sensing the
difference between the actual
ambient room temperature
and the set temperature on the
remote controller.
• For Cooling only models, there
is no HEAT mode available.
• In the Auto and Dry mode, the
fan speed can be switched.
• In the Fan mode, you can not
adjust the setting temperature.
 ENGLISH 11

Swing Operation
Press the Swing button (A) and the
Swing button (B) to adjust the desired
airflow direction.
1. Left/Right direction can be adjusted
with the button (A) on the remote
controller. Press the button, the
A B
louver will swing left and right
automatically. Press the button again
to stop the louver at your desired
position.
2. Up/Down direction can be adjusted
with the button (B) on the remote
controller. Press the button, the
louver will swing up and down
automatically. Press the button again
to stop the louver at your desired
position.
• For the models without Swing
Left/Right function, there is
no feedback received by the
indoor unit when you press the
button.

Timer Operation
Press the Timer button (A) can set the
auto-on time and the auto-off time of
B
the unit.
To set the Timer on time.
1. When the remote controller is at off
state, press the Timer button, the
Timer on signal and time will show on
the display.
A
2. Press the / button to set
desired Timer on time.
3. Press the Timer button again to
active the Timer on function.
To set the Timer off time.
1. When the remote controller is at on
state, press the Timer button, the
Timer off signal and time will show on
the display.
2. Press the / button to set
desired Timer off time.
3. Press the Timer button again to
active the Timer off function.
12 www.electrolux.com

• When setting the Timer on or

Timer off functions, up to 10
hours, the time will increase in
30 minute increments with each
press. After 10 hours and up
to 24, it will increase in 1 hour
increments.

Examples of Timer Settings

TIMER ON TIMER OFF

Example: Example:
It is 8:00 AM and you want the air It is 6:00 PM and you want the air
conditioner to start working after 6 hours. conditioner to turn off after 10 hours.
1. When the remote controller is at off 1. When the remote controller is at on
state, press the Timer button, the Timer state, press the Timer button, the Timer
on signal and time will show on the off signal and time will show on the
display. display.
2. Press the / button until “6.0h“ 2. Press the / button until “10h“
display on the remote controller. display on the remote controller.
3. Press the Timer button again to active 3. Press the Timer button again to active
the Timer on function. the Timer off function.
 ENGLISH 13

Advanced Functions Operations

1. °C/°F switch function

°C/°F can be switched by pressing and
Mode buttons at the same time for 3 seconds.

2. Turbo function
Press the Turbo button to enable or disable
the turbo function. The Turbo function makes
the unit work extra hard to reach your set
temperature in the shortest time as soon as
possible. When you need fast cool or heat,
you can choose this function.
1
3. I Feel function
When you press the I Feel button, the I Feel
function will be activated, the remote controller
works as a remote thermostat, providing an
accurate temperature control and maximum
2 6
comfort. The remote controller sends the
temperature information at its location to the
7 indoor unit. The air conditioner will quit I Feel
3 operation if no temperature information is
8
4 received from the remote controller.
9
5
4. I Clean function
Press the I clean button to activate the I Clean
feature, when this function is activated, firstly
the indoor unit operates in cooling mode with
low fan speed for serveral minutes. After that
the unit turns to heating operation with low
fan speed, which dry the inside of indoor unit.
If cooling only model, it will operate as fan
mode. Finally it turns to fan-only mode and
blows away the rest wet air in serveral
minutes. The whole process keep the internal
side of indoor unit dry and prevents the
breeding of bacteria.
It was useless if press the button in power on
mode. Only in power off mode, the remote
controller can send code.
If you press two time, it will cancel the function
immediately.
14 www.electrolux.com

5. X-Fan function 7. Sleep function

In power on mode, press X-Fan button, Press sleep button to enter sleep mode.
after 5 continuous rings the function will Then, in cool or heat mode, the set
activate successfully. temperature will increase(cooling) or
The indoor fan motor will keep on working decrease(heating) by 1ºC(2ºF) over the
for 4 minutes after the unit turned off to next 1 hour and by another 1ºC(2ºF)
dry the indoor unit to prevent from bacteria after an additional 1 hour. The unit will
and mildew growing. automatically exit sleep function when the
sleeping time is up to 7 hour. Unit will not
Continuous pressing the X-Fan button two turn off.
times, the function will canceled after 3
continuous rings. Remark: press the MODE of ON/OFF
button, the remote controller clears
X-Fan function is long available after setting. sleeping mode away.

6. I Favor function 8. Health function

The button is a shortcut button, users could
Press the Health button to active the
reserve the data of mode, fan speed, set
health function. When the function
temperature, swing and when pressing on
is initiated, the Ionizer/Plasma Dust
it, it could operate in the mode users set
Collector(depending on models) is
before.
energized and will help to remove pollen
and impurities from the air and I feel
a. Turn on the air conditioner, make function will be activated, at the same
adjustment to the ideal mode you wanted. time room temperature will automatically
b. Keep pressing the I Favor button for change to 26ºC, I feel function can be
three seconds, till the display screen give canceled by pressing I Feel button, also
the signal that represents the I Favor room temperature setting be adjusted by
button and glitter for three times, then pressing / button. This function is
reserve the operation mode in the remote recommended when the indoor air quality
controller, it’s done. To take place of the is in bad condition.
previous operation mode, just do it as
shown above. 9. Wireless function
Continuous pressing Health button
8 times in 10s, then enter the
Wireless binding status.

• Please refer to the “Quick

Start Guide” for the Wireless
connection details.
 ENGLISH 15
7. HOW TO USE THE INDOOR UNIT

1. Adjust the air flow direction properly

otherwise it might cause discomfort
or cause uneven room temperatures.
2. Adjust the horizontal louver using the
remote controller.
3. Adjust the vertical louver using the
remote controller.
4. Adjust the vertical louver manually
Vertical louver (For models without 3D Swing
function).

To set the vertical air flow (Up -

Down) direction
Perform this function while the unit is
in operation. Use the remote controller
to adjust the air flow direction. The
horizontal louver can swing up and
down automatically.
Range
To set the horizontal air flow
direction (Left - Right)
Perform this function while the unit is
in operation. Use the remote controller
to adjust the air flow direction. The
vertical louver can swing left and right
automatically.
For models without 3D Swing function,
Range you need to move the vertical louver
manually to adjust the air flow in the
WARNING! direction you prefer.
• Do not operate the air
conditioner for long periods IMPORTANT!
with the air flow direction set Do not put your fingers into the panel
downward in cooling or dry of blower and suction side. The high-
mode. Otherwise, condensation speed fan inside may cause danger.
may occur on the surface of • Open angle of the horizontal louver
the horizontal louver causing should not be set too small, as
moisture to drop on to the floor COOLING or HEATING performance
or on furnishings. may be impaired due to too restricted
• When the air conditioner is air flow area.
started immediately after it • Do not move the horizontal louver
was stopped, the horizontal manually, otherwise the horizontal
louver might not move for louver will be out of sync. Please
approximately 10 seconds. cease operating, unplug power for
Louver in closed position. a few seconds, then restart the air
conditioner.
• Do not operate unit with horizontal
louver in closed position.
16 www.electrolux.com

8. OPERATING TEMPERATURE

Operating temperature ranges

Model climate Type Ambient temperature (Cooling) Ambient temperature (Heating)
T1 18°C~43°C -7°C~43°C

Important!
1. Optimum performance will be achieved 2. If the air conditioner runs for a long time
within these operating temperatures. in cooling mode and the humidity is
If air conditioner is used outside of high, condensed water may drip out of
the above conditions, certain safety the unit. Please sets the vertical air flow
protection features might come into louver to its maximum angle (vertically
operation and cause the unit to function to the floor), and set HIGH fan mode.
abnormally.

9. EMERGENCY OPERATION
Units are equipped with a switch to run
emergency operation mode. It can be
accessed by opening the front panel.
This switch is used for manual operation
in case the remote controller fails to work
or maintenance necessary.
1. Open and lift the front panel up to
an angle until it remains fixed with a
clicking sound.
2. One press of the manual control
switch will lead to the forced AUTO
operation. If press the switch twice
within five seconds, the unit will turn
off.
Manual control button 3. Close the panel firmly to its original
position.
• The unit must be turned off
before operating the manual
control button. If the unit is
operational, continue pressing
the manual control button until
the unit is off.
• This switch is used for testing
purposes only. You had better
not choose it.
• To restore the remote controller
operation, use the remote
controller directly.
 ENGLISH 17
10. CLEANING AND MAINTENANCE

10.1 Before Maintenance

Turn the system off before cleaning. To
clean, wipe with a soft, dry cloth. Do not
use bleach or abrasives.
WARNING!
Power supply must be disconnectd
before cleaning the indoor unit.
• A cloth dampened with cold Dust filter handle
water may be used on the indoor 3. Then pull the dust filter downwards out
unit if it is very dirty. Then wipe it of the indoor unit.
with a dry cloth.
• Do not use a chemically treated
cloth or duster to clean the unit.
• Do not use benzine, thinner,
polishing powder, or similar
solvents for cleaning. These may
cause the plastic surface to crack
or deform.
• Never use water hotter than
4. The healthy air freshening filter
40ºC/104ºF to clean the front
(if applicable) are fixed on the
panel, it could cause deformation
dust filter.
and discoloration.
• Remove the healthy filter from the
support frame of the dust filter.
10.2 Cleaning the Unit
Wipe the unit with a soft dry cloth only. If
the unit is very dirty, wipe it with a cloth
Dust filter
soaked in warm water.

10.3 Cleaning the Filters Healthy filter

A clogged air filter reduces the cooling
efficiency of this unit. Please clean the filter • Clean the healthy filter at least
once every 2 weeks. every 3 months and replace every 6
months.
1. Lift the indoor unit front panel up to an
angle until it stops with a full support • Clean with vacuum cleaner if
from the bracket. possible.
Clean the Dust filter with a vacuum
cleaner or water, then dry it up in cool
place.
Dust filter

2. Hold the dust flter handle and lift it

up slightly to take it out from the filter
holder.
18 www.electrolux.com

5. Install the air freshening filter back into 3. Install a new air freshening filter.
position. 4. Reinstall the air filter and securely close
the front panel.

10.6 Preparation for extended

non-operation
If you plan to idle the unit for a long time,
perform the following:
1. Clean the indoor unit and filters.
6. Insert the upper portion of air filter back
2. Operate the fan for about half a day to
into the unit, taking care that the left
dry the inside of the unit.
and right edges line up correctly and
place filter into position. 3. Stop the air conditioner and disconnect
power.
4. Remove the batteries from the remote
controller. The outdoor unit requires
periodic maintenance and cleaning. Do
not attempt to do this yourself. Contact
your dealer or service provider.

10.7 Pre-season inspection

1. Check that the wiring is not broken off
10.4 Cleaning the air outlet and or disconnected.
the panel 2. Clean the indoor unit and filters.
1. Use a dry and soft cloth to wipe it. 3. Check that the air filter is installed.
2. Pure water or mild detergent may be 4. Check if the air outlet or inlet is blocked
used if it is very dirty. after the air conditioner has not been
used for a long time.
WARNING!
• Do not use benzine, thinner, WARNING!
polishing powder, or similar • Do not touch the metal parts of
solvents for cleaning. These may the unit when removing the filter.
cause the surface to crack or Injuries can occur when handling
deform. sharp metal edges.
• To avoid the risk of electrical • Do not use water to clean inside
shock or fire, do not let water fall the air conditioner. Exposure to
into the indoor unit. water can destroy the insulation,
leading to possible electric
• Never wipe the air flow louver shock.
violently.
• When cleaning the unit, first
• An air conditioner without air make sure that the power and
filter can not expel the dust out circuit breaker are turned off.
of the room, which would cause
malfunctions by accumulation. • Do not wash air filter with hot
water at more than 40ºC/104ºF.
Shake off moisture completely
10.5 Replacement the filters and dry it in the shade. Do not
expose it directly to the sun, it
1. Remove the air filter. may shrink.
2. Remove the air freshening filter.
 ENGLISH 19
11. OPERATION TIPS

The following events may occur during 5. Abnormal noise of the air
normal operation. conditioner
1. Protection of the air conditioner • You may hear a low hissing sound
Compressor when the compressor is running or has
• The compressor can’t restart for just stopped running. It is the sound of
3-4 minutes after it stops. the refrigerant flowing or coming to a
2. Anti-cold air (Cooling and heating stop.
models only) • You can also hear a low “squeak”
• The unit is designed not to blow cold air sound when the compressor is running
on HEAT mode, when the indoor heat or has just stopped running. This is
exchanger is in one of the following caused by heat expansion and cold
three situations and the set temperature contraction of the plastic parts in the
has not been reached. unit when the temperature is changing.
A) When heating has just started. • A noise may be heard due to louver
restoring to its original position when
B) Defrosting. power is turned on.
C) Low temperature heating. 6. Dust is blown out from the indoor
• The indoor or outdoor fan stop running unit
when defrosting (Cooling and heating This is a normal condition when the air
models only). conditioner has not been used for a
3. Defrosting (Cooling and heating long time or during first use of the unit.
models only) 7. A peculiar smell comes out from
• Frost may be generated on the outdoor the indoor unit
unit during heat cycle when outdoor This is caused by the indoor unit giving
temperature is low and humidity is high off smells permeated from building
resulting in lower heating efficiency of material, from furniture, or smoke.
the air conditioner.
8. The air conditioner turns to FAN
• During this condition air conditioner only mode from COOL or HEAT
will stop heating operation and start (For cooling and heating models
defrosting automatically. only) mode
• The time to defrost may vary from 4 to When indoor temperature reaches the
10 minutes according to the outdoor temperature setting on air conditioner,
temperature and the amount of frost the compressor will stop automatically,
built up on the outdoor unit. and the air conditioner turns to FAN
4. A white mist coming out from the only mode. The compressor will start
indoor unit again when the indoor temperature
• A white mist may generate due to a rises on COOL mode or falls on HEAT
large temperature difference between mode (For cooling and heating models
air inlet and air outlet on COOL mode in only) to the set point.
an indoor environment that has a high 9. The air conditioner runs X-fan (Anti-
relative humidity. mildew) function after turning off
• A white mist may generate due to the unit.
moisture generated from defrosting When turning off the unit under COOL
process when the air conditioner and DRY mode, the air conditioner
restarts in HEAT mode operation after will run X-fan (Anti-mildew) function for
defrosting. 4 minutes, then stop the operation and
20 www.electrolux.com

turn off the unit automatically. 11. Auto-restart function

Dripping water may generate on the • Power failure during operation will stop
surface of the indoor unit when cooling the unit completely.
in a high relatively humidity (relative
• For the unit without Auto-restart
humidity higher than 80%). Adjust the
feature, when the power restores, the
horizontal louver to the maximum air
OPERATION indicator on the indoor
outlet position and select HIGH fan
unit will flash for 1second. To restart the
speed.
operation, push the ON/OFF button on
10. Insufficient Heat (For cooling the remote controller. For the unit with
and heating models only) Auto-restart feature, when the power
The air conditioner draws in heat restores, the unit restarts automatically
from the outdoor unit and releases with all the previous settings preserved
it via the indoor unit during heating by the memory function.
operation. When the outdoor
temperature falls, heat drawn in by the
air conditioner decreases accordingly.
At the same time, heat loading of
the air conditioner increases due to
larger difference between indoor and
outdoor temperature. If a comfortable
temperature can’t be achieved by the
air conditioner, we suggest you use a
supplementary heating device.
 ENGLISH 21
12. TROUBLESHOOTING

OPERATION (RUN) indicator The unit may stop operation

or other indicators continue or continue to run in a safety
flashing. condition(depending on models).
Waiting for about 10 minutes,
If one of the following code the fault may be recovered
appears on the display area: automatically, if not, disconnect the
E0, E1, E2...En, F0, F1, F2... power and then connect it in again.
Fn, P0, P1, P2...Pn, L0, L1, If the problem still exists, disconnect
Trouble L2...Ln the power and contact the nearest
customer service center.
Fuse blows frequently or circuit
breaker trips frequently.
Stop the air conditioner immediately,
Other objects or water fall into
disconnect the power and contact
the air conditioner.
the nearest customer service center.
Terrible odors are smelled or
abnormal sounds are heard.

Malfunctions Cause What should be done?

Unit does not Power cut Wait for power to be restored.
start Unit may have become Check that plug is securely in wall
Unplugged. receptacle.
Fuse may have blown. Replace the fuse.
Battery in Remote controller
Replace the battery.
may have been exhausted.
The time you have set with
Wait or cancel timer setting.
timer is incorrect.
Unit not Set temperature correctly. For
cooling or Inappropriate temperature detailed method please refer to
heating setting. “HOW TO USE THE REMOTE
(Cooling/ CONTROLLER” section.
heating Air filter is blocked. Clean the air filter.
models only)
room very Doors or Windows are open. Close the doors or windows.
well while air Air inlet or outlet of indoor or Clear obstructions away first, then
flowing out outdoor unit has been blocked. restart the unit.
from the air
conditioner Compressor 3 minutes
Wait
protection has been activated.
If the trouble has not been corrected, please contact a local dealer or the nearest
customer service center. Be sure to inform them of the detailed malfunctions and unit
model number. Do not attempt to repair the unit yourself. Always consult an authorized
service provider.
www.electrolux.com/shop

91030a