Scribd
Upload
30 views

Cirrus Photo Quick Guide

Uploaded by

Alberto Juarez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

Cirrus Photo Quick Guide

Uploaded by

Alberto Juarez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

00542 BBP CIRRUS photo 600 quick guide.

pdf 1 18/01/2016 22:13

CIRRUS™ photo Scan Acquisition (Models 600 and 800)


Quick Reference Guide

WARNING – GENERAL HAZARDS


These quick instructions are intended as an overview. Instructions for the safe operation of the device are to be found in the user's manual.

F Please read the CIRRUS photo user manual carefully before using this product.

Select acquisition mode and scan parameters


Select the desired imaging mode.
Advanced tip:
Select this mode for Select this mode Select this mode For patients who have difficulty fixating, take OCT and fundus images as
OCT imaging only for combined OCT for fundus imaging separate acquisitions (CIRRUS and Photo), and combine them using
+ fundus imaging only.
or .
Align and fo cus the instrument using working distance dots
Pull the instrument back from the patient and place patient‘s chin in the chinrest.
Adjust table height and use eye level marks to adjust height of chinrest.
Use joystick to align instrument with patient pupil (use alignment circles for best
positioning).

Move instrument towards patient. The focusing aid and working distance dots (two
white dots) will appear together with the fundus image.
false correct
Bring the working distance dots roughly into focus.
If AutoFocus fails, use knob on side of instrument (bars should be aligned
horizontally).
Bring the working distance dots into focus by turning and moving the joystick and
C
align the working distance dots within the horizontal lines.

CM
Acquire image(s)

MY Instruct patient to blink once and to look directly at the fixation target .

CY
Click joystick button to capture image(s).
Advanced tip:
CMY
To modify OCT scan pattern location, press arrow () on keypad before capturing
K images. Use controls on OCT fundus image to change the scan location and
rotation/size (HD Raster only).

Grab and drag scan Grab edge of scan pattern to Press <!> on keypad or the
pattern to preferred scan resize the raster scan length Optimize button in display.
location. and spacing. For 1 Line Raster, Use the scroll wheel of your
drag spacing to zero. mouse to center the scan.

Review the captured scan, then save or try again.


Evaluate the B-scan quality and the signal strength (should be 6 or greater).
Check that the OCT B-scans in the display windows appear centered and that no
data is cut off or missing.
Click Try Again to repeat scan acquisition, if necessary.
Click Save to save the OCT scan (fundus images are automatically saved).

000000-2121-813-KurzGA01-GB-280815
00542 BBP CIRRUS photo 600 quick guide.pdf 2 18/01/2016 22:13

CM

MY

CY

CMY

Carl Zeiss Meditec AG Phone: +49 3641 220 333 000000-1795-718-KurzGA01-GB-280815


Goeschwitzer Str. 51-52 Fax: +49 3641 220 112 CIRRUS photo
07745 Jena Email: [email protected] © Carl Zeiss Meditec AG, Jena
Germany Internet: www.zeiss.com/med Specifications subject to change

You might also like