\
Worldwide Regulatory Compliance Engineering and Environmental Affairs
MARKETING NAME…………Dell Chromebook 11 Dell Inc.
REGULATORY MODEL…….A35 www.dell.com
REGULATORY TYPE………..CB1C13
EFFECTIVE DATE…………….November 30, 2013
EMC EMISSIONS CLASS….B
TABLE OF CONTENTS
I. GLOBAL ENVIRONMENTAL INFORMATION ......................................................................................................... 2
II. NFPA 99 CONFORMITY ......................................................................................................................................... 2
III. POWER CORDS AND USER DOCUMENTATION ................................................................................................... 2
IV. DATASHEET RESPONSIBLE PARTY NAME AND ADDRESS .................................................................................... 2
V. TRADE (IMPORT/EXPORT) COMPLIANCE DATA................................................................................................... 2
VI. SYSTEM DIMENSION AND WEIGHT ...................................................................................................................... 2
VII. PERFORMANCE DATA ............................................................................................................................................ 3
VIII. PRODUCT MATERIALS INFORMATION ................................................................................................................. 4
IX. PACKAGING ............................................................................................................................................................ 5
X. BATTERIES .............................................................................................................................................................. 5
XI. DESIGN FOR ENVIRONMENT ................................................................................................................................ 6
XIII. RECYCLING/ END-OF-LIFE SERVICE INFORMATION .......................................................................................... 6
STATEMENT OF COMPLIANCE
This product has been determined to be compliant with the applicable standards, regulations, and directives for the
countries where the product is marketed. The product is affixed with regulatory marking and text as necessary for
the country/agency. Generally, Information Technology Equipment (ITE) product compliance is based on IEC and
CISPR standards and their national equivalent such as Product Safety, IEC 60950-1 and European Norm EN 60950-1
or EMC, CISPR 22/CISPR 24 and EN 55022/55024. Dell products have been verified to comply with the EU RoHS
Directive 2011/65/EU. Dell products do not contain any of the restricted substances in concentrations and
applications not permitted by the RoHS Directive.
EMC Emissions Class refers to one of the following use environments:
EMC Class B products are intended for use in residential/domestic environments but may also be used in non-
residential/non-domestic environments.
EMC Class A products are intended for use in non-residential/non-domestic environments. Class A products
may also be utilized in residential/domestic environments but may cause interference and require the user to
take adequate corrective measures.
For Product Safety and EMC compliance, this product has been assigned a unique regulatory model and regulatory
type that is imprinted on the product labeling to provide traceability to the regulatory approvals noted on this
datasheet. This datasheet applies to any product that utilizes the assigned regulatory model and type including
marketing names other than those listed on this datasheet. ErP compliance is tied to the CE mark.
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, 1907/2006) is the European Union’s
(EU) chemical substances regulatory framework. Dell complies with the REACH directive. For information on SVHC
(Substances of Very High Concern), see www.dell.com/REACH.
Compliance documentation, such as certification or Declaration of Compliance for the product is available upon
request to [email protected] . Please include product identifiers such as marketing name,
regulatory module, regulatory type and country that compliance information is needed in request.
Product Safety, EMC & Environmental Datasheet
Revision A07 Page 1
\
Worldwide Regulatory Compliance Engineering and Environmental Affairs
I. GLOBAL ENVIRONMENTAL INFORMATION
Environmental
Country Approval Compliance
Global Energy Star Spec Version 5.2
Varies by country – see link below EPEAT Silver
Adapter Certification and Declaration
Country Authority/Mark
Australia Australia MEPS
South Korea South Korea MEPS
United States US DOE
II. NFPA 99 CONFORMITY
Select Dell systems have been tested and found to comply with the touch current requirements as defined in
10.3.5 of National Fire Protection Association standard NFPA 99:2012. The touch current does not exceed 100
A with ground wire intact (if a ground wire is provided) and 500 A with ground disconnected at 127 V AC,
60 Hz when tested in accordance with 10.3.5 of NFPA 99: 2012. To determine if this product complies with
the above requirements, send a request to [email protected]. Please include product
identifiers such as marketing name, regulatory type and country for which compliance information is needed.
III. POWER CORDS AND USER DOCUMENTATION
Dell products are provided with the power cord and user documentation suitable for the intended country of
delivery. Products that are relocated to other countries should use nationally certified power cords and plugs
to ensure safe operation of the product. Contact Dell to determine if alternate power cords or user
documentation in other languages is available for your market.
IV. DATASHEET RESPONSIBLE PARTY NAME AND ADDRESS
Dell Inc.
Department: Global Regulations and Standards
MS: PS4-30
Round Rock, Texas 78682, USA
[email protected] V. TRADE (IMPORT/EXPORT) COMPLIANCE DATA
For any questions related to importing & exporting classification of Dell products, please obtain information
from the following link: www.dell.com/import_export_compliance or send request to
[email protected]
VI. SYSTEM DIMENSION AND WEIGHT
Optimal
Depth, Width, Height,
Weight, kg Resolution
mm mm mm
(Display Only)
1.32 kg
202 296.0 19.95 n/a
(depending upon installed options)
Product Safety, EMC & Environmental Datasheet
Revision A07 Page 2
\
Worldwide Regulatory Compliance Engineering and Environmental Affairs
VII. PERFORMANCE DATA
System Configuration
The Energy Consumption and Declared Noise Emissions data is based on a configuration including:
Processor Intel® Pentium® 3556U @1.70Ghz
Hard Drive(s) 16G(SSD)
Memory 4G
Video Card UMA
RMSD / Optical Drive N/A
Power Supply (Internal or External) External
Power Supply Size in Watts 65W
Power Supply Efficiency Level 88%
Client Computers:
Energy
BTU
Service Level Consumption Description of Service Level
Calculation
(Wattage)
The system is running programs to maximize the power
*Maximum 0.00 0.00 consumption.
(Chrome OS cannot run maximum power programs)
Idle Mode 5.38 18.40 As specified EPA Energy Star Computer mode.
S3 “Sleep” Mode 0.69 2.36 Suspend-to-RAM (low-power/sleep mode)
System is turned off but still connected to its AC power
Off 0.41 1.40 source. If the product is a computer, the Low Power Mode
feature is enabled via BIOS if available.
External Power
Supply “No-Load” 0.11 0.38 AC adapter connected to mains with system detached
(if applicable) otherwise known as “No-load” condition.
*Maximum Energy Consumption results are based solely upon the laboratory testing of the System
Configuration listed above.
Energy consumption is tested at 230 Volts / 50 Hz. Heat dissipation is calculated based on the measured
watts, assuming the service level is attained for one hour. BTU is calculated based upon the wattage reading
taken in the given mode. To convert Watts to BTU, (1 Watt = 3.42 BTU)
If applicable, iAMT increases the power consumption even during the off state. The power measurements
reported above are valid only if the iAMT Management Engine (ME) is set to “ON” in S0 state only (S0 is simply
power-on, non-sleep, working state).
Energy Consumption*
Energy efficiency benefits the environment and lowers the total cost of equipment ownership by reducing
power consumption. Dell offers energy calculators that help estimate power needs, potential emissions
avoidance and potential cost savings. Click here for Dell’s Client Energy Savings Calculator, Data Center
Capacity Planner, and Monitor Power Savings Calculator. Information on Energy Efficiency is available here
* This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the
software, components and peripherals you ordered. Accordingly, the customer should not rely upon this information in making decisions
about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied. For more details visit
www.dell.com/environmental_information
Product Safety, EMC & Environmental Datasheet
Revision A07 Page 3
\
Worldwide Regulatory Compliance Engineering and Environmental Affairs
Declared Noise Emissions in accordance with ISO 9296 (tested in accordance with ISO 7779)
Computers
Sound Power Sound Pressure Sound Pressure
(LWAd, bels) (1 bel=10 Operator Position Bystander Position
Service Level
decibels, (LpAm, decibels) (LpAm, decibels)
re 10-12 Watts) (re 2x10-5 Pa) (re 2x10-5 Pa)
Hard Drive Accessing N/A N/A N/A
Optical Drive N/A N/A N/A
Accessing
Idle 2.8 23.1 17.4
CPU activated (at a
utilization of 50%) 3.3 26.8 20.1
ECMA-74
Note: N/A means no applicable due to system is not configured with HDD and ODD.
1
VIII. PRODUCT MATERIALS INFORMATION
Information on Dell’s material use is available here.
To review Dell’s Restricted Material Guidance document click here.
The case material is, >PC+ABS FR(40)<
This product contains 0% post-consumer recycled plastic
Marking of plastic parts greater than 25 grams are done in accordance with ISO 11469 (see below)
Flame Retardants Used in Motherboard
Part Flame Retardant
Motherboard TBBPA
Flame Retardants Used in Mechanical Plastic Parts > 25 grams
List applicable
R-Phrase(s) or
Marking per Flame Retardant Flame Retardant
Hazard
Resin Material ISO Marking per ISO (i.e. TBBPA, triaryl
Statement(s) per
Name 11469:2000, 1043-4 (i.e. FR(16), phosphate ester,
EU Directive
11469:1996 FR(40), etc.) etc.)
67/548/EEG or
1272/2008
LG GN- halogen-free
>PC+ABS
5151RFA- FR(40) organic phosphorus N/A
FR(40)<
KU058 compounds
Mercury Information
Number of bulbs Average per bulb
0 < 0 mg
India RoHS Declaration
DECLARATION OF CONFORMITY WITH GAZETTE OF INDIA: EXTRAORDINARY, E-WASTE (MANAGEMENT &
HANDLING) RULES (INDIA ROHS)
1
Waste Handling. Local regulations should be observed when disposing of this product due to the presence of the materials and substances as
listed above.
Product Safety, EMC & Environmental Datasheet
Revision A07 Page 4
\
Worldwide Regulatory Compliance Engineering and Environmental Affairs
Dell Inc. declares that all Dell branded products have been designed and manufactured in compliance with E-Waste
2
(Management & Handling) Rules on the reduction in the use of hazardous materials in the manufacture of electrical
and electronic equipment and their maximum allowed concentrations by weight in the homogenous material
(except for the exemptions listed in schedule II).
Substance Concentration
Lead 0.1%
Mercury 0.1%
PBB (Polybrominated Biphenyls) 0.1%
PBDE (Polybrominated Diphenyl Ethers) 0.1%
Hexavalent Chromium 0.1%
Cadmium 0.01%
Compliance has been verified via internal design controls, supplier declarations, and/or analytical test data. The
undersigned below possesses the complete technical documentation relating to the declaration of compliance.
For additional information please visit:
Restricted Material Compliance www.dell.com/environmental_information
Products MSDS (Material Safety Data Sheets):
Batteries:
http://www.dell.com/content/topics/topic.aspx/global/shared/about_dell/values/regulatory_compliance/en/d
ell_battery_declaration_january2011?c=us&l=en&s=corp&~ck=anavml
Printer Toner and Ink:
http://www.dell.com/downloads/global/corporate/environ/comply/MSDS_doc.pdf
IX. PACKAGING
Information on Dell’s sustainable packaging effort available here.
Additional materials restricted in Packaging as per Dell’s Restricted Material Guidance document found here.
Total Weight % of Post-Consumer Recycled Content (PCR)
of each
Packaging Materials
Material APJ region DAO region EMEA region
type, (kg)
Corrugated Fiberboard 0.532 100% 100% 100%
EPE 0.0021 ＞80% ＞80% ＞80%
Molded paper pulp 0.15 100% 100% 100%
HDPE (including
0.007 0% 0% 0%
thermoformed)
For more details on packaging please click www.dell.com/environmental_information
X. BATTERIES
Below is a listing of batteries that could be present in the product:
Battery Description – Batteries Battery Type Battery Weight (kg)
Rechargeable Battery 3 cell Lithium Ion 0.27
2
E-Waste (Management & Handling) Rules 2011, by the Ministry of Environment & Forests, Government of India dated
May 12, 2011.
Product Safety, EMC & Environmental Datasheet
Revision A07 Page 5
\
Worldwide Regulatory Compliance Engineering and Environmental Affairs
XI. DESIGN FOR ENVIRONMENT
Dell systems are, when applicable, designed for easy assembly, disassembly, and servicing.
For more information on product Recyclability please click www.dell.com/environmental_information
XIII. RECYCLING/ END-OF-LIFE SERVICE INFORMATION
Take back and recycling services are offered for this product in certain countries. If you want to dispose of
system components, contact Dell for instructions by emailing [email protected] or visit
www.dell.com/recyclingworldwide and select the relevant country.
Product Safety, EMC & Environmental Datasheet
Revision A07 Page 6
