FOCUS ON YOUR BUSINESS,

NOT YOUR BUSINESS

COMMUNICATIONS.
WELCOME TO COMCAST BUSINESS VOICEEDGE™

END USER FEATURE GUIDE

Table of Contents
Welcome to Comcast Business VoiceEdge™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Quick Start: VoiceEdge Common Basic Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–6
Introduction to Your Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Placing a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Voicemail Set Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Quick Start: VoiceEdge Common Advanced Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–9
Telephony Toolbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–7
Speed Dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–8
Be Anywhere. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
VoiceEdge Mobile App. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Messages — On the Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–11
Setting Up Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
First Time Voicemail Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting Your Personalized Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Accessing Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Managing Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–11
Using Your Voicemail Box to Forward Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
To Make a Call from the Voice Portal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Leaving Messages for Other Users in Your Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Messages — Online. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Greetings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Features — Online and/or Using the Telephony Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13–25
Downloading the Telephony Toolbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
System Requirements to Run the Toolbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the Telephony Toolbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Services Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Be Anywhere. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15–17
Remote Office. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Click to Dial from Microsoft Outlook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Alternate Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18–19
Basic Call Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Busy Lamp Field. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Shared Call Appearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Multiple Call Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Automatic Callback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Push to Talk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Automatic Hold and Retrieve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Call Forwarding Always. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Call Forwarding Busy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Call Forwarding No Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21–22
Call Forwarding Selective. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Sequential Ring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Call Notify. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Distinctive Ringing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Hoteling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23–24
Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Call Queue Agent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Business Voice Continuity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Comcast Softphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26–30
System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Login. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Softphone Basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Placing a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Answering a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Controlling Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Three-Way Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Adding Video to Your Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Table of Contents 2
Reception Console. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31–32
Launching Reception Console for the First Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Accessing Reception Console via Desktop Icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Reception Console Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31–32
Receptionist Monitored Users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Managing Calls with Reception Console. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Additional Business Voice Continuity Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Privacy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33–34
Caller ID Blocking per Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Caller ID Blocking per Line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Anonymous Call Rejection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Barge In Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Directory Privacy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Table of Contents 3
Welcome to Comcast Business VoiceEdge™
Now that you have Comcast Business VoiceEdge™, you can focus on your business and not your business communications.
You’ll enjoy all the usual features you would expect of a phone service, plus advanced features that help ensure your business
voice continuity and can enhance your business productivity. You could enjoy features like:
• Call Forward Not Reachable to assure your business keeps receiving calls, even when weather or power outages keep the
lights off
• Voicemail
• Voicemail to Email Integration so messages follow you wherever you’re located
• High-Definition Voice Calling with Advanced IP phones
And all of this is provided and managed by Comcast, bringing you the latest technology to help your business. Plus, you get
unlimited nationwide direct-dial calling for your office (includes U.S. Territories).

Enhancing features have never been so accessible. With Business VoiceEdge, you can access features in three convenient
ways — the Telephony Toolbar* available on your desktop integrated with Microsoft Outlook® and/or Internet Explorer® and
Mozilla Firefox®, the Comcast Business VoiceEdge Online Web portal for additional point-click activation and for some features
via feature access codes on your IP phone or via your mobile smartphone.
To download the Telephony Toolbar, Comcast Softphone*, or Reception Console, visit the downloads section of the
Business VoiceEdge portal at business.comcast.com/bveportal.
To learn more about your convenient calling features and options, flip through the following pages or visit our online resources
at business.comcast.com/getstarted.
Still have questions? Want to add features and services? Your Business Customer Support representatives will be happy
to help. Just call 877-761-7401.

* Telephony Toolbar and Comcast Softphone only available with the Unified Communications user package.

Welcome 4
Quick Start: VoiceEdge Common Basic Features
Get familiar with your new Business VoiceEdge service and phones by reading this quick start section.
Introduction to Your Phone
The Business VoiceEdge service comes with Polycom® IP Phones. Please refer to the diagrams below to get quickly introduced to
the buttons and functions of popular VoiceEdge phones.
Polycom VVX310 Series Phone

Display
Message Waiting Indicator
Handset

Line Keys
Home Button
Softkeys Navigation Arrows
Headset
Volume Keys
Speaker Phone

Mute

Polycom VVX500 Series Phone

Touchscreen Display

Message Waiting Indicator

Handset
Home Button
Dialpad
Headset

Speaker Phone

Mute

Volume Keys

Additional supported phones include the Polycom VVX410 and VVX600. For more information on these devices, please visit
business.comcast.com/getstarted.
Users can use the navigation arrows as well as the soft keys to help navigate through each feature. The navigation arrows will be your
main tool for navigating the different setup menus while the soft keys will be used for more call related options.
Navigation Arrows
If you are not in any Menu lists your Navigation Arrows act as a quick access tool for your recent call logs. By pressing each of the
Navigation Arrows you can access Placed calls, Missed calls, Received calls and Speed Dial. All calls are ordered in order by time
stamp with the most recent appearing at the top of the list.

Arrow Key Call Log

▷ Right arrow Placed calls
▽ Down arrow Missed calls
◁ Left arrow Received calls
△ Up arrow Speed dial

Soft Keys
Your Polycom phone is equipped with a number of soft keys. The soft keys are the buttons directly below the screen, and the display
changes depending on the current call state. For example, if you are on a call, the soft keys may display transfer or conference as
options. As the phone goes through different states, the soft keys provide different options. To use a soft key, press the button below
the screen that corresponds to the option you would like to select.

Quick Start 5
Placing a Call
There are many ways to place a call — you can pick up the handset and dial, you can select the soft key for “new call”, you
can hit the speaker button and dial, and more. To see a short video on time-saving tricks to place calls, please visit
business.comcast.com/getstarted.
Placing calls using the number pad
To place a call using your phone number pad simply pick up the handset and dial your desired telephone number or extension
using the number pad. If you would like to use a headset or speaker phone, activate the headset or speaker phone by pressing
the appropriate button and then dial the number or extension.
Dialing from Call Logs
To place a call from a number that is stored in your call logs, enter a call log of your choice by pressing the corresponding
Navigation Arrow key. Using the Navigation Arrow keys scroll up or down to highlight the number you wish to dial. And then, press
the Dial soft key.
Voicemail Set Up
Comcast Business VoiceEdge voicemail enables you to manage your time without missing your calls. Callers can leave a message
while you’re on the phone, off-site, or just need phone-free time to focus on a project.
If you are away from the office, you can opt to be notified via email that you have messages waiting. Voicemail is included with a
Unified Communication seat, and can be added as an a la carte item to a Standard seat, Hunt Group or Auto Attendant.
Activate your voicemail account
To setup your voicemail for the first time you have to be physically present at your desk phone. For voicemail activation:
1. Press the “Messages” button on your phone or dial your extension or 10-digit telephone number.
2. A tutorial will guide you through the setup of your new voicemail service.
Note: You will be prompted to enter a password, which will be the “Be Anywhere/Voicemail PIN” listed on the welcome email that contained your VoiceEdge
credentials. Should you need this information resent, please contact your Technical Administrator or call Customer Care. Once you’re in the system, listen
carefully to the recorded instructions. You will be prompted to create a password, record your name and record a customized business greeting.

Quick Start: VoiceEdge Common Advanced Features

Business VoiceEdge has many advanced features that can help enhance your productivity and this section will guide you through
using the most common features.
Most of these features are set up and accessed through the Telephony Toolbar or the portal. You will find reference to activating
features in either place.
Telephony Toolbar
The Telephony Toolbar is a tool that gives you quick access to many of your Business VoiceEdge functions and features. The Toolbar
is available through an online download and installs to your browser and Microsoft Outlook®, Internet Explorer® or Mozilla Firefox®.
Follow the instructions below to access and download your toolbar.
Note: The Telephony Toolbar is a PC-only application. Please refer to page 13 for minimum PC requirements.

Downloading the Telephony Toolbar

• Visit business.comcast.com/bveportal, click “downloads”, then click “Toolbars” to run the exe.
After you have installed the Telephony Toolbar you will notice a new menu bar in your browser, as pictured below.

Configuring the Telephony Toolbar

• Click the “Options” button from the Toolbar.
• Click the “Account” icon.
• Enter your username and password found in your VoiceEdge Credentials email. Should you need this information resent, please
contact your Technical Administrator or call Customer Care. Check the “Save Username and Password” boxes and click “OK”.
• Click the “Connection” icon and confirm the following URL is in the Host Address field: bve-web.wdv.comcast.net. Also confirm that
the Port Field displays 2208. Then click “Apply” and “OK”.
The buttons on the Telephony Toolbar will no longer be gray and will light up. To view a short video outlining these steps, please visit
business.comcast.com/getstarted.

Quick Start 6
Dialing from the Telephony Toolbar
Unified Communication seats have the ability to make calls from the Telephony Toolbar and other methods including Click to Dial from
Microsoft Outlook and calling telephone numbers that appear on your screen.
To dial from your toolbar:
1. Enter the destination number into the Dial Number area of the Telephony Toolbar.
2. Press Enter on your keyboard.
To dial a Microsoft Outlook contact:
1. In your Microsoft Outlook click on “Contacts”.
2. Find the contact you wish to call.
3. Right-click (or alternate mouse-click) on the contact information.
4. Select “Call”.
To call phone numbers on a web page:
1. Highlight the number you wish to call.
2. Right click.
3. Select “Call”.
For even more ways to call please see the self-help video about time saving tricks for placing calls at
business.comcast.com/getstarted.
Speed Dial
Business VoiceEdge includes functionality for One Digit Speed Dial or Two Digit Speed Dial. One Digit Speed Dial is used for
programming up to 8 telephone numbers into your phone for quick dialing using single digits. Two Digit Speed Dial does the same
as One Digit Speed Dial, only it stores up to 100 numbers and you dial them using two digits. You can do either or both as long as
you follow the appropriate set up for each.
One Digit Speed Dialing
To set up One Digit Speed Dialing from your phone:
1. Lift the receiver and listen for the dial tone.
2. Press and listen for the stutter dial tone.
3. Enter a speed dial digit between 2 and 9.
4. Dial the phone number you would like the digit to represent. (Remember to include the area code and any other numbers necessary
to place the call.)
5. Listen for the voice prompt confirmation.
6. To add the next number, repeat steps 2 through 5.
To set up One Digit Speed Dialing from
your computer:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click “Speed Dial” from the tab of features. One Digit Speed Dialing is listed at the top.
4. Enter the appropriate phone numbers in the boxes corresponding with digits 2 through 9 and
the person’s name in the Name box.
5. Click “Save Changes”.
To use One Digit Speed Dialing:
1. Lift the receiver and listen for the dial tone.
2. Press the digit (2 through 9) that represents the number you wish to call, then press .
Note: Speed Dial can also be used on the Telephony Toolbar.

Two Digit Speed Dialing

To set up Two Digit Speed Dialing from your phone:
1. Lift the receiver and listen for the dial tone.

Quick Start 7
2. Press and listen for the stutter dial tone.
3. Enter any two digits through 99.
4. Dial the phone number you would like the digits to represent. (Remember to include the area code and any other numbers
necessary to place the call.)
5. Listen for the voice prompt confirmation.
6. To add the next number, repeat steps 2 through 5.
To set up Two Digit Speed Dialing from your computer:
1. Log on to business.comcast.com/bveportal, and select “Feature Settings” from the Main Navigation Page.
2. Click “Speed Dial” from the tab of features.
3. Scroll down to the “Two Digit Speed Dialing”, and select “Add New”.
4. Type a name or description for the Speed Dial number in the Description text box.
5. Type the phone number and the person’s name you are assigning to your Speed Dial code.
6. Click “Save Changes”.
To use Two Digit Speed Dialing:
1. Dial and then your 2-digit speed dial number.
2. Then lift the receiver / go off-hook to have the speed dial number called.
Note: Speed Dial can also be used on the Telephony Toolbar.

Quick Start 8
Be Anywhere
The Be Anywhere service allows you (as a Unified Communications seat user) to make and receive calls from any device at any
location with only one phone number. Be Anywhere lets you make and receive calls from colleagues, prospects and customers on any
phone using your office number.
Receiving Business Calls on Your Mobile
You can receive business calls on your mobile phone by adding your mobile number to the Be Anywhere Locations List. In addition,
you can also receive calls on another phone number (it does not have to be your mobile number).
To add a number to the Be Anywhere Locations List:
From the Telephony Toolbar From the VoiceEdge Portal
1. Click the “Services” button on the Telephony Toolbar. 1. Log on to business.comcast.com/bveportal.
2. Select “Be Anywhere”. 2. Select “Feature Settings”.
3. Click “Add”. 3. From the “Work Remote” tab, click “Add New” under “Manage Be
Anywhere”.
4. Enter your mobile phone number and a description. 4. Enter your mobile phone number and a description.
5. Ensure Enable is checked. 5. Click “Save Changes”.
6. Select “Apply”. 6. Toggle the device “On” or “Off”.
Note: You can also enable “Answer Confirmation” which requires that a human physically confirms the call prior to answering. This prevents a call from inadvertently
hitting your mobile or other telephone voicemail instead of your work voicemail and, since you need to press a key to answer these calls, you can then easily
determine which calls are from your VoiceEdge number.

Make Business Calls from Your Mobile

You can make calls from your mobile phone using your Business VoiceEdge business number as the calling line ID.
From your mobile, dial your Be Anywhere portal number and wait for the dial tone. Once you hear the tone, dial the destination number
or business extension. The called party sees your Business VoiceEdge business number (not your mobile number) as the calling line
ID. Many users save the Be Anywhere portal number as a favorite or speed dial number for easy reference.
Note: Your Be Anywhere portal number is displayed in the VoiceEdge portal or in the Telephony Toolbar under the Be Anywhere section.

Move Call from One Phone to Another Phone

This functionality enhances your personal productivity. For example, you may move a business call you placed through the Be
Anywhere portal on your mobile while you are on lunch, and upon returning to the office, you may choose to move the call to your desk
phone.
Move Active Call from Your Mobile to Your Desk Phone or Softphone:
While engaged in a call you placed through the Be Anywhere portal via your mobile, dial from your desk phone or
softphone. The call is seamlessly moved to the new phone and the mobile call leg is dropped.
You may also move a call that was placed to your business line that you answered on your mobile phone from Be Anywhere, using the
same process as above.
Note: You cannot move calls placed directly to your mobile number, since Be Anywhere and the VoiceEdge platform have no knowledge of the call.

Move Active Call from Your Desk Phone or Softphone to Your Mobile:
From your mobile, dial your Be Anywhere portal number and wait for the dial tone. Once you hear the tone, dial manually.
VoiceEdge Mobile App
The VoiceEdge Mobile App lets you make calls from your smartphone using your VoiceEdge business number, just as if you were
in your office. You can check your business voicemail, set your smartphone and other phones as your ring to devices,
change and record your voicemail greetings, see your call logs, and have easy access to your VoiceEdge phone
directory, all from your smartphone.
Following are some of the other features that the VoiceEdge Mobile App provides:
• Use the keypad for extension dialing
• Record and select your VoiceEdge No Answer greetings
• Get notifications when you have an incoming call and new voicemail
• Turn Do Not Disturb on and off for privacy
• Get notified if service is set in a way that may result in missed calls
For information on how to download and use the VoiceEdge Mobile App, see our VoiceEdge Mobile App Quick Reference Guide that
is posted with other VoiceEdge training resources at business.comcast.com/getstarted.

Quick Start 9
Messages — On the Phone
Comcast Business VoiceEdge voicemail enables you to manage your time without missing your calls. Callers can leave a message
while you’re on the phone, off-site, or just need phone-free time to focus on a project. If you are away from the office, you can opt to be
notified via email that you have messages waiting.
Setting Up Voicemail
To set up your new Comcast Business VoiceEdge voicemail service, follow these easy-to-use instructions. The first time you call into
your Comcast Business VoiceEdge voicemail, you will be asked to create a new password and record your name to personalize the
greeting that callers will hear when they reach your voicemail.
Note: Each line may have its own voicemail and would need to be set up individually.

First Time Voicemail Activation

From your office:
1. Press the “Messages” button on your phone or dial your extension or 10-digit telephone number.
2. A tutorial will guide you through the setup of your new voicemail service.
Note: You will be prompted to enter a password, which will be the “Be Anywhere/Voicemail PIN” listed on the welcome email that contained your VoiceEdge credentials.
Should you need this information resent, please contact your Technical Administrator or call Customer Care. Once you’re in the system, listen carefully to the
recorded instructions. You will be prompted to create a password, record your name and record a customized business greeting.

Setting Your Personalized Name

Press to record new Personalized Name.
Press to listen to current Personalized Name.
Press to delete Personalized Name.
Press to return to the Main Menu.
Press to repeat the Main Menu.
Accessing Voicemail
There are three ways to access your voicemail:
From your office:
1. Press the “Messages” button on your phone or dial your 3-4 digit extension or 10-digit telephone number.
From your desktop:
1. Click the “Dial Voicemail” icon on the Telephony Toolbar. Or visit business.comcast.com/bveportal to access voicemail online.
Away from your office:
1. Dial your office telephone number.
2. When your personal greeting starts, press .
3. Enter your password when prompted.
Managing Voicemail
When you access Comcast Business VoiceEdge voicemail by phone, you will be in the Main Menu. This menu will prompt you with a
set of options to use in managing your messages. Once you’ve made a selection from the Main Menu, you will hear prompts to guide
you through further options. The following is a list of options available to you from the Main Menu.
Main Menu options:
Press to access voice messaging.
Press to record a personalized name.
Press to change call forwarding options.
Press to change passcode.
Press to exit voice portal.
Press to repeat the Main Menu.
Once you’ve made a selection from the Main Menu, you will hear prompts to guide you through further options.
Message options:
Press to review your new messages. While playing the message you can:

End User 10
• Press to skip backwards 3 seconds.
• Press to pause playback of a message.
• Press to skip forward 3 seconds.
• Press to skip to the beginning of a message.
• Press to skip to the end of a message.
• Press to delete the message.
• Press to save the message.
After you’ve listened to your new messages, you have the following options:
• Press to replay the message. While playing the message you can:
• Press to return to the previous message.
• Press to skip to the next message.
• Press to call the sender of your message.
• Press to hear more options.
• Press to return to the Main Menu.
• Press to repeat the Main Menu.
Greeting options:
Press for message management options, like updating your various greeting messages. You then have the following options:
• Press for the line busy Greeting Menu.
• Press for the no answer Greeting Menu.
• Press for the Compose Message Menu.
Note: You can also upload or record your greeting directly from the VoiceEdge portal.

Using Your Voicemail Box to Forward Calls

If you are a Unified Communications seat user, you may use your voicemail box to activate and deactivate Call Forwarding options
when you are out of the office or when your office phone is already in Call Forwarding mode.
To activate Call Forwarding:
1. Access your voicemail box.
2. You will be prompted to enter your mailbox number, which is your 10-digit office telephone number.
3. Enter your password when prompted.
4. From the Main Menu, dial for Call Forwarding.
5. Follow the prompts to activate or deactivate Call Forwarding Always to the current destination number.
Note: The destination numbers can only be domestic telephone numbers; international numbers are not allowed.

To Make a Call from the Voice Portal

1. Enter the destination digits. While engaged in a call, press to terminate and make another call.
2. Press to return to the Main Menu.
Leaving Messages for Other Users in Your Group
During greeting:
1. Press to interrupt the greeting and start recording a new voice message.
2. Press to transfer out of the greeting to your voicemail box password prompt.
3. Press to transfer out of the greeting to a pre-configured number.
While recording message:
1. Press to cancel the recording and transfer to voicemail box password prompt.
2. Press to cancel the recording and transfer to a pre-configured number.
3. Press to stop recording and review your message.

End User 11
Messages — Online
With VoiceEdge, some feature management is available through the portal, and this section will go through those features. From the
portal you can turn on and off specific features, listen to voicemail, review call logs, view your company directory and more.
1. To access the VoiceEdge portal, log on to business.comcast.com/bveportal.
2. Sign in with your user credentials provided in the Welcome Email, and the same credentials
used for the Telephony Toolbar.
3. The first time you login, you will need to set your security questions for quick and easy
password retrieval. Once the security questions are established, you will be directed to the
portal dashboard.

Note: Your username and password were emailed to you upon installation. Should you need this information resent, please contact Comcast Customer Care.

Listen, delete or download voicemail from either the dashboard or the voicemail section of the portal. The voicemail section of the
portal provides a more detailed view and the ability to listen to ALL your voice messages while the dashboard contains only your most
recent voice messages. To access the Voicemail section, click the Voicemail tab from the main VoiceEdge navigation. The different
tabs in the voicemail section grants you more control over your voicemail options. You may also record or upload a new voicemail
recording through the VoiceEdge portal. Please refer to the next section for more detail.

Set up a telephone number

or extension for callers to be
transferred to when they dial 0 Set up email notifications
at your message prompt when voicemails are received

Listen, download, or
delete your recorded
voicemail messages

Manage No Answer and

Stores deleted voicemail Busy greetings as well as
until permanently deleted other greeting options

Greetings
The platform also allows you to record and upload personal WAV files as greetings to use when people reach your voice messaging
box. You may provide alternate no answer recordings, although you can access only one of these greetings at a time.
To record or upload greetings:
1. From the Voicemail Page, select the “Greetings” tab.
2. If you want callers to hear a standard greeting, select “Standard Greeting”.
3. To have callers hear your personalized greeting, select “Personal Greeting”.
4. Click “Record Your Greeting” to record using your computer microphone.
5. To upload a pre-recorded greeting, select “Upload Your Greeting”, and then browse for the appropriate file.
Note: To create a WAV file using your PC requires specific settings in Windows Sound Editor. The file must be saved using u-law 8-bit mono settings. To record your
greetings on your phone, please refer to the instructions on pages 11–12. The maximum greeting length is five minutes.

End User 12
Features — Online and/or Using the Telephony Toolbar
Downloading the Telephony Toolbar
The Business VoiceEdge Unified Communications package includes a Toolbar that is fully integrated with Microsoft Outlook® and
Internet Explorer®.
The Telephony Toolbar resides in Microsoft Outlook®, Mozilla Firefox® and Internet Explorer® and allows for click-to-dial functionality
from existing Outlook contacts or from phone numbers on a Web page, as well as advanced feature control and setup.
See page 14 of this guide for more details.
System Requirements to Run the Toolbar
Software Requirements Windows 2000 with SP4 (or higher), Windows XP, Windows Vista, Windows 7 or Citrix Presentation
Server 3 or 4
Windows Installer 2.0
Internet Explorer (IE) 11 and earlier releases (required to use the Toolbar in IE)
Mozilla Firefox 26 and earlier releases (required to use the Toolbar in Firefox)
Outlook 2000 SP3, 2002/XP SP2, 2003, 2007, 2010 (required to use the toolbar in Outlook)
32 and 64-bit Outlook & IE
Microsoft Active Directory has been tested and supported for LDAP integration
Squid Proxy Server has been tested and supported for silent upgrades
Citrix Presentation Server Platform The application can be published on a Citrix server via the Management Console for MetaFrame.
Citrix ICA Client Workstation No additional software requirements.
Platform
Note: When the toolbar is run on a 64-bit version of Windows 7 and uses a Firefox browser the User Account Control (UAC) must be set to “Never Notify.”

End User 13
Using the Telephony Toolbar

1 2 3 5 6 7 8 9 10 11 12 13 14 15

1. Connect: This button is red if you are not logged in; click to automatically log in.
2. Options: Pre-configured general connection settings; where you enter login during initial setup.
3. Services: Configure incoming call control features and/or voice messaging.
4. Portal Login: Log on to the Business VoiceEdge portal from Internet Explorer or Firefox.
5. Be Anywhere: Set up one number that rings all your phones; use the Be Anywhere voice portal to make and place calls using your
office line while you are mobile.
6. Remote Office: Enable a remote location to act as your work phone.
7. Call Forwarding Always: Turn on/off the ability to send calls directly to a specified phone number.
8. Call Forwarding No Answer: Turn on/off the ability to forward all incoming calls to a specified phone number if your phone isn’t
answered.
9. Call Forwarding Busy: Turn on/off the ability to forward all incoming calls if you are on a call.
10. Do Not Disturb: Turn on/off the ability to send calls directly to voicemail (busy greeting).
11. Speed Dial: Dial from the speed dial directory.
12. Call History: View missed, dialed and received calls.
13. Personal Directory: Access your personal directory.
14. Group Directory: Access the company-wide group directory.
15. Search: Enables you to search for a previously searched user/contact directly or to specify an ad hoc user/contact query.
Call Controls

1 2 3 4 5 6 7 8 9

1. Dial Contact: Click to dial an Outlook contact’s business, home or mobile phone number.
2. Dial Other: Displays the last 10 dialed numbers for quick selection.
3. Answer: Answer a call.
4. Hold: Place a call on hold.
5. Voicemail: Dial voicemail.
6. Transfer: Transfer a call to another extension.
7. 3-Way: Initiate a 3-way conference call.
8. End: Terminate a call.
9. Call Line: When a call is placed or received, the call line selector will automatically select a call and provide the name of the party (if
available).

End User 14
Services Menu
Anonymous Call Rejection: Enables a user to reject calls from anonymous parties who have explicitly
restricted their Caller ID. Callers without available caller ID are informed that the user is not accepting
calls at that time. The user’s phone does not ring and the user sees or hears no indication of the
attempted call.
To set up the feature, click on the item and turn it “On” or “Off”.
Call Forwarding Always: Enables a user to redirect all incoming calls to another phone number. If
activated, a user must specify the forwarding number.
Call Forwarding No Answer: Enables a user to redirect calls to another destination when an incoming
call is not answered within a specified number of rings.
To set up the feature, click on the item and turn it “On” or “Off”. Enter the forwarding telephone number
and the number of rings before the call should be forwarded.
Call Forwarding Busy: Enables a user to redirect calls to another destination when an incoming call
encounters a busy condition. If activated, a user must specify the forwarding number.
To set up the feature, click on the item and turn it “On” or “Off”, then supply the forwarding number.
Do Not Disturb: Allows users to set their station as unavailable so that incoming calls are given a busy treatment.
To set up the feature, click on the item and turn it “On” or Off”.
External Calling Line ID Delivery: Provides calling line ID information of an external caller. To set up the feature, click on the item and
turn it “On” or “Off”.
Internal Calling Line ID Delivery: Provides calling line ID information of an internal caller. To set up the feature, click on the item and
turn it “On” or “Off”.
Be Anywhere
The Be Anywhere service allows you (as a Unified Communications seat user) to make and receive calls from any device at any
location with only one phone number. Be Anywhere always offers colleagues, prospects and customers your office number, and then
the platform will ring through to your mobile or home office phone without having to give these numbers out directly. Other benefits of
Be Anywhere include:
• The ability to call colleagues from your mobile using their 4-digit extension.
• Move a call seamlessly from your desk to your mobile.
• Move a call from your mobile to your desk phone (for calls placed via your cell phone through the Be Anywhere portal).

1. Alert all Locations for Click-to-Dial calls: The check box specifies whether Be Anywhere locations listed should be alerted for the
Click-to-Dial service. This means (when enabled) that when you place a call all of your Be Anywhere devices will ring, however you
will not be able to use the auto-answer capability on your desk phone.
2. View Available Portal List: The link displays the page below, which lists the Be Anywhere portal available to you. Add this contact to
your cell phone Contact list or as a Speed Dial for use when you would like to place a call from your cell phone, but have it appear as
if it is coming from your office phone.

End User 15
3. Be Anywhere Locations List: Allows you to add, delete or modify your Be Anywhere location phone numbers. The phone numbers
added here will ring when you receive a call to your business number.

4. Advanced Options per Location: Contains a list of advanced options that can be enabled or disabled separately for each Be
Anywhere location.
• Enable Diversion Inhibitor — This feature is not applicable. No need to enable.
• Require Answer Confirmation — Enabling this feature requires that the user press a button on their cell phone to accept a call. By
doing this, in the event there is no answer the caller returns to your business voicemail box, and is not dropped into your cell phone
voicemail.
• Use BroadWorks-based Call Control Services — This feature is not applicable. No need to enable.
• Outbound Alternate Number/SIP URI — This feature is not applicable. No need to enable.
Note: If you have Be Anywhere enabled, be sure to DISABLE Remote Office and/or Call Forwarding Always for the duration, as it will have a service interaction and not
work as expected.

Make Business Calls from Your Mobile

You can make calls from your mobile phone using your Business VoiceEdge business number as the calling line ID.
From your mobile, dial your Be Anywhere portal number and wait for the dial tone. Once you hear the tone, dial the destination number
or business extension. The called party sees your Business VoiceEdge business number (not your mobile number) as the calling
line ID. Calls placed this way can also utilize the Call Pull feature and may be moved to your desk phone using , and the
instructions on the next page.
Control Your Ability to Be Reached
The Be Anywhere solution allows you to make or receive business calls from your desk phone, mobile, or softphone, allowing you to
be productive from any location, at any time.
However, there are times when you may not want to be reached. Perhaps you are several time zones away on the other side of the
world and you do not want your daily flurry of business calls alerting your mobile.
Be Anywhere allows you to activate and deactivate your ability to be reached from your phone so that on those long business trips,
you can “deactivate” your mobile at night. This way calls to your business number do not reach you. Calls go to your other phones as
always, and callers receive a standard voicemail if you do not answer. In the morning, you simply reactivate your mobile and you start
receiving calls sent to your business number.
Activate or Deactivate Be Anywhere Online:
From the VoiceEdge portal, you can manage our Be Anywhere phones and toggle them on or off.

Deactivate a Be Anywhere Phone:

From the phone to be deactivated, dial .
Activate a Be Anywhere Phone:
From the phone to be activated, dial .

End User 16
Move Call from One Phone to Another Phone
This functionality enhances your personal productivity. For example, you may move a business call you placed through the Be
Anywhere portal on your mobile while you are on lunch, and upon returning to the office, you may choose to move the call to your desk
phone.
Move Active Call from Your Mobile to Your Desk Phone or Softphone:
While engaged in a call you placed through the Be Anywhere portal via your mobile, dial from your desk phone or
softphone. The call is seamlessly moved to the new phone and the mobile call leg is dropped.
You may also move a call that was placed to your business line that was answered on your cell from Be Anywhere, using the same
process as above.
Note: If someone dials your mobile number directly (instead of your VoiceEdge desk number that rings on your mobile device), you will not be able to move the call,
since Be Anywhere and the Business VoiceEdge platform have no knowledge of the call.

Move Active Call from Your Desk Phone or Softphone to Your Mobile:
From your mobile, dial your Be Anywhere portal number and wait for the dial tone. Once you hear the tone, dial manually.

End User 17
Remote Office
The Remote Office feature enables users to access and use their Business VoiceEdge service from any end point, on-net or off-net
(e.g., home office, mobile phone). This service is especially useful for mobile workers, as it enables them to use all of their advanced
features while working remotely (e.g., extension dialing, transfers, conference calls, Outlook Integration, directories, etc.).
To set up Remote Office from the toolbar:
1 5

Step 1: Click the “Services” button from the Toolbar.

3
Step 2: Select “Remote Office”.
4

Step 3: Turn the feature “On”.

2 Step 4: Enter the telephone number to which calls should be forwarded. Click “OK” when
finished.
Step 5: Once configured via the Services Menu, Remote Office can be turned “On” or
“Off” via the Remote Office button on the Toolbar.

Note: If you have Remote Office enabled, be sure to DISABLE Be Anywhere for the duration, as it will have a service interaction and not work as expected.

To set up Remote Office online:

1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click on the “Work Remote” tab.
4. Scroll down and click to toggle the Remote Office feature “On” or “Off”, then click “Save
Changes”.

Outbound Dialing with Remote Office

Outbound dialing requires access to the Telephony Toolbar. Enter the number in the Dial Contact field and hit the enter key on your
keyboard. Alternately, you may click on “Telephony Toolbar” from an open contact record, then select the phone number of the
contact you wish to dial by clicking the icon of the phone number you wish to dial (business, home or mobile).

The Remote Office service will first dial your Remote Office line (mobile or home number), and when you answer your Remote Office
line, it will start ringing the number you entered into the Toolbar. The remote calling party will see your office line caller ID.
Note: With Remote Office, the call is placed through the VoiceEdge platform. Callers will see your VoiceEdge telephone number and the call will be included as part of
your VoiceEdge unlimited nationwide calling plan (includes U.S. Territories).

Receiving Inbound Calls with Remote Office

All calls to your office line will ring to your Remote Office line (mobile or home number) assigned in the Toolbar.
Note: It is important to turn off Remote Office if you leave the location of the Remote Office line. Incoming calls to your business line will continue to ring at the Remote
Office number until you turn off the feature.

Click to Dial from Microsoft Outlook

From within the Contacts Menu of Outlook, users have the ability to click on the contact and
have the contact’s telephone number dialed automatically. You may also dial from an open
contact record by clicking on the Telephony Toolbar tab of the contact record, then clicking on
the Business, Home or Mobile icons in the upper left-hand corner of the contact record to dial
the respective phone numbers.

Alternate Numbers
Alternate Numbers allows you to have up to ten alternate phone numbers or extensions assigned, in addition to your main phone
number. A user can be reached (receive an inbound call) through any of the phone numbers. The first number is the main or primary
phone number, while the additional ten numbers are the user’s alternate or secondary phone numbers. Each alternate phone number
can be a direct inward dialing number (DID) or an extension. Outbound calls use the main number only.

End User 18
For each alternate number, the user can associate one of four ring patterns. All calls to the main number result in the normal ring
pattern. Calls to the alternate numbers result in a distinctive ring pattern that corresponds to the number that was used.
If a user is busy (and Call Waiting is enabled) an incoming call to the main number results in the usual call waiting tone, while an
incoming call to any of the alternate numbers results in a distinctive call waiting tone.
Business VoiceEdge Customer Care can provision or update an Alternate Number. Once provisioned, you can see any Alternate
Numbers provisioned to your main line on the VoiceEdge portal by viewing Feature Settings, then Advanced Settings.
Basic Call Logs
The Basic Call Logs service allows for you to see the 20 last missed, placed or dialed calls. The maximum number is 20 entries per call
type. These Basic Call logs are viewable by Unified Communications seat users in the Telephony Toolbar or on the VoiceEdge portal.
Busy Lamp Field
Busy Lamp Field (BLF) enables IP attendant console phones or Reception Console to subscribe to a list of resources (users) to monitor,
and receive presence notifications on the state of the monitored resources. The BLF service is a user service that supports the
provisioning of an ordered list of monitored users.
The order of monitored users corresponds to the line appearance order of the monitored user on the SIP attendant console phone.
The list of available users to be monitored is determined by the users within the enterprise or group of the user who is assigned the
BLF service. The maximum number of monitored users that can be provisioned is 25.
Busy Lamp Field Configuration
The Busy Lamp Field area of the portal allows a user to manage and add and remove the monitored users for display on a sidecar or IP
Phone.
To set up Busy Lamp Field:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click “Advanced Settings”.
4. Next to Busy Lamp Field, click “Show more”.
5. Check the box next to the users that you want to monitor their status.
6. Click on “Add People”.
7. Click “Save”.
Shared Call Appearance
The Shared Call Appearance service allows you to provision up to 35 locations (identity/device profiles) for a user. These locations
share the same line appearance, so they all behave as extensions of a single line,
or user.
One of these provisioned locations is the user’s primary location, while the other locations are called alternate locations. Users can be
assigned any identity/device profile for their primary and alternate locations.
Note: There is a one-time set-up charge for this feature.

To have a Shared Call Appearance configured, call into the Business VoiceEdge Support Center with the following information:
1. Which Unified Communications seat user requires the Shared Call Appearance?
a. What is their telephone number?
b. How many available lines does their phone have? For example, the Polycom 335 is a 2-line phone, the Polycom VVX500 is a
12-line phone, the Polycom 670 is a 6-line phone, and the VVX1500 is a 6-line phone.
c. What number do you want in Position 1 (line 1) of the phone?
Note: It is recommended that this be the device’s primary User.

d. What telephone number do you want in position 2? Position 3, etc.?

Multiple Call Arrangement
The Multiple Call Arrangement (MCA) is an overlay to the Shared Call Appearance (SCA) feature. SCA with MCA service provides
the ability for multiple calls to be handled concurrently on different SCA locations for a user. No single SCA location is considered
the active location, so all locations are allowed to originate calls and receive new incoming calls when they have an available call
appearance, regardless of the activity at the other locations.

End User 19
Automatic Callback
When enabled in the Web portal, you are prompted to activate Automatic Callback when you get a busy signal while calling another
intra-group user. This feature will monitor and notify you with a distinctive ring when the user becomes available.
Push to Talk
Push to Talk allows people to call each other and have the phone answer automatically via the speaker phone. You can control which
users call you this way through the VoiceEdge portal.
To set up Push to Talk:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click “Advanced Settings”.
4. Next to Push to Talk, click “Show more”.
5. Check the box next to the users that you want to call using Push to Talk.
6. Click on “Add People”.
7. Click “Save”.
Note: Once your Push to Talk settings are established, you can turn the feature on or off by selecting “On” or “Off”. To make a Push-to-
Talk call, press on your phone, and the user’s extension for any person that has added you to their Push to Call list.

Automatic Hold and Retrieve

The Automatic Hold and Retrieve service provides an alternate method to hold and retrieve calls without using feature access codes or
flash hook.
To set up Automatic Hold and Retrieve:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click “Advanced Settings”.
4. Next to Automatic Hold and Retrieve, click
“Show more”.
5. To turn on Automatic Hold and Retrieve, turn the switch to “On”.
6. Select the number of seconds to hold, between six and six hundred.
7. Click “Save”.

End User 20
Call Forwarding Always
Call Forwarding Always enables you to forward ALL of your incoming calls.
To activate Call Forwarding Always from your phone:
1. Lift the receiver and listen for the dial tone.
2. Press and wait for the voice prompts.
3. Dial the number to which your calls will be forwarded. You will hear a voice prompt confirmation.
4. If you want to change the “forward to” number, repeat steps 1 through 3.
To deactivate Call Forwarding Always from your phone:
1. Lift the receiver and listen for the dial tone.
2. Press . Call Forwarding Always is now turned off.
Note: While Call Forwarding Always is active, you will hear a splash ring on your phone to remind you that the feature is active. You will not be able to answer any calls on
your line while Call Forwarding Always is active. To resume receiving calls on your business line, cancel Call Forwarding Always. If you have Be Anywhere enabled,
be sure to DISABLE Remote Office and/or Call Forwarding Always for the duration, as it will have a service interaction and not work as expected.

To activate/deactivate Call Forwarding Always online:

1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click the “Call Forwarding” tab.
4. Next to Call Forwarding Always, enter the “forward to” number and select a ring reminder option.
5. Toggle “On” to activate Call Forwarding of ALL calls, or “Off” to deactivate Call Forwarding.
6. Click “Save”.
Call Forwarding Busy
When you’re waiting for a critical call, but still need to use your telephone, Call Forwarding Busy enables you to send all incoming calls
to an alternate number when you’re using your line. Simply activate Call Forwarding Busy before making your call, or activate Call
Forwarding Busy online while speaking if your call becomes unexpectedly lengthy.
To activate Call Forwarding Busy from your phone:
1. Pick up the phone and press .
2. Dial the number to which you want to direct your call.
To deactivate Call Forwarding Busy from your phone:
1. Pick up the phone and press .
2. Hang up. Your incoming calls may now be received normally.
To activate/deactivate Call Forwarding Busy online:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click the “Call Forwarding” tab.
4. Next to Call Forwarding Busy, enter the number to which incoming calls should go, click “On”, then click “Save”.
Call Forwarding No Answer
Redirect incoming calls to another telephone number when you are unable to answer. When you know you won’t be back in time
for a critical call, you can program and activate Call Forwarding No Answer to ring your current location, your cell phone or a colleague.
To activate Call Forwarding No Answer from your phone:
1. Pick up the phone and press .
2. Dial the number to which you want to direct your call. (Be sure to include any access numbers and area codes you normally use to
call this number).
To deactivate Call Forwarding No Answer from your phone:
1. Pick up the phone and press .
2. Hang up to deactivate. Incoming calls may now be received normally.

End User 21
To activate/deactivate Call Forwarding No Answer online:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click the “Call Forwarding” tab.
4. Next to Call Forwarding No Answer, enter the number to which incoming calls should go, click “On”,
then click “Save”.
Call Forwarding Selective
Forward only those calls you don’t want to miss. Call Forwarding Selective allows you to create a list of people whose calls will be
forwarded to a number you designate. When you activate this feature, only calls from the individuals on your list will be forwarded.
To activate/deactivate Call Forwarding Selective:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click the “Call Forwarding” tab.
4. Scroll down to Call Forwarding Selective, and add the number to which you want to forward
calls.
5. Toggle the number “On” or “Off”, and click “Save”.

Sequential Ring
Sequential Ring enables you to define a “find me” list of phone numbers or URLs, which are alerted sequentially when you receive
an incoming call. If an incoming call to your line is not answered within a given number of rings, your calling party will hear an
announcement stating the system is attempting to locate you. If your last Sequential Ring number remains unanswered, your caller is
sent to your voicemail.
To set up Sequential Ring:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click on “Advanced Settings”.
4. Next to “Sequential Ring”, click “Show More”. Check the “Ring Office Phone First” if that is your preference.
• If the check box is selected, your base location phone rings first in the ring sequence.
• If the check box is cleared, the first phone in the ring sequence rings first.
5. Select the number of rings before incoming calls are redirected to your “find me” phone numbers.
6. Enter your “find me” phone numbers in the order most likely to reach you first.
7. Enter the number of rings before your incoming call is redirected to the next line. Check “Answer Confirmation Required” if you want
to prevent a call from being dropped into voicemail. If you select this option, if a human does NOT verify the call, it will move to the
next number in the sequence.
8. Click “Save Changes”.
To deactivate Sequential Ring:
1. Uncheck the “Ring Office Phone First” and uncheck the “Continue search process if Office Phone is busy”.
2. Click “Save Changes”.

End User 22
Call Notify
There are certain incoming calls you want to know about as soon as possible. Call Notify sends an email when specific calls you
designate come in. You specify the pre-defined criteria such as phone number, time of the day or day of the week. Call Notify will send
an email only when all of the pre-defined criteria are met.
To set up Call Notify:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click “Advanced Settings”.
4. Next to Call Notify, click the to show more, and then click “Add New”.
5. Enter a title to describe the specific criteria.
6. Enter the timeframe and holiday schedule.
7. Enter up to 10 specific phone numbers.
8. Click “Save Now”.
Note: Once your Call Notify settings are established, you can turn the feature on or off by selecting either the “Notify” or “Do Not Notify” buttons.

Distinctive Ringing
Distinctive Ringing enables you to make your phone utilize a different ring tone based on pre-defined criteria. Use this service if you
want to know when anyone from a specific company calls or any member of a group is working on a critical project. Distinctive Ringing
can be a list of up to 12 phone numbers or digit patterns as well as a specified time schedule. All criteria for an entry must be true for the
phone to ring with a different tone (phone number plus day of the week and time of the day).
To set up Distinctive Ringing:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click “Advanced Settings”.
4. Next to Distinctive Ringing, click “Show more”.
5. To create a new Distinctive Ringing treatment, click “Add New”.
6. Enter a Description (or name).
7. Click “Use Distinctive Ring”.
8. Select “Time Schedule” or “Holiday Schedule” (if applies).
9. Select “Any Phone Number” or “Selected Numbers”.
10. If “Selected Numbers” was selected, provide numbers that when they call you, Distinctive
Ringing treatment will be applied.
11. Click “Save Changes”.

Hoteling
Hoteling allows users to associate their service profiles with devices other than their own. For example, your enterprise can set
up a visitor’s office with a phone. The user account associated with this phone would have the Hoteling Host service assigned. A
salesperson, with the Hoteling Guest service assigned, can associate their service profile with the phone in the visitor’s office for when
that employee is using that phone.
Hoteling consists of two separate services, Hoteling Host and Hoteling Guest. The first service, Hoteling Host, is used to designate
a particular user as a host and is a feature of the Unified Communications seat, allowing other users, with the Hoteling Guest service
assigned, to associate their service profile with the Host user’s device. The second service, Hoteling Guest, is used to allow a Hoteling
Guest user to associate their service profile with a Hoteling Host user’s device.
Note: A user who is both a Hoteling Host and a Hoteling Guest cannot associate their Hoteling Guest service to themselves as a Host. Therefore, even if you are
provisioned with both, Hoteling Guest and Hoteling Host services; when you as a Hoteling Guest, list all available Hoteling Hosts, your name does not appear in
the list of available Hosts.

End User 23
Hoteling Host and Hoteling Guest
To set up Hoteling Host and Hoteling Guest:
1. Log on to business.comcast.com/bveportal.
2 From the Main Navigation Page, click “Feature Settings”.
3. Click the “Hoteling” tab.
4. To set up Hoteling Guest, turn feature “On”.
5 Select time to limit association (in hours).
6. Select who will be the Hoteling Host.
7. To set up Hoteling Host, turn feature “On”.
8. Select time to limit association (in hours).
Hoteling Guest Voice Portal Commands
Once associated, the guest can use the voice portal menu to manage services.
The User — Hoteling Guest voice portal controls are as follows:
Voice Portal Main Menu (If Hoteling Guest is Assigned)
Default Key Option
1 Access Voice Messaging
2 Change CommPilot Express Profile
3 Record Personalized Name
4 Change Call Forwarding Options
6 Make Call
7 Access Hoteling
8 Change Passcode
9 Exit Voice Portal
# Repeat Menu
Hoteling Menu
Default Key Option
1 Check Host Status
2 Associate With Host
3 Dissassociate From Host
4 Return to Main Menu
# Repeat Menu

Directory
The Directory provides access to your company’s directory. It is available on both the dashboard and the Directory section of the
VoiceEdge portal.
To find a phone number:
1. Use the scroll bar to search.
2. Use the alphabet to narrow by last name.
3. Use the search function to search by name.

End User 24
Call Queue Agent
The My Queues tab enables users to join and unjoin call queues. When joined, the user will receive calls from the queue. If a user is
assigned to multiple queues, those queues will be displayed here.
To join a Call Queue:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, click “Feature Settings”.
3. Click the “My Queues” tab.
4. Select the Call Queues that you want to receive
calls from.
5. Click “Save”.

Business Voice Continuity

Business VoiceEdge has many user-level features that ensure Business Continuity. Technical Administrators may want to ensure that
users understand these features and how they may impact a broader Business Continuity plan.
Note: These are user level features that can be controlled by the individual users.

Call Forwarding Not Reachable

There are several features that ensure your business voice continuity. The most important of these features is Call Forwarding Not
Reachable. With Call Forwarding Not Reachable, your incoming phone calls are automatically routed to a pre-determined destination
in the event of power outages, broadband outages, device outages or natural disasters causing outages. No human intervention is
needed. The service is set up during the provisioning of your VoiceEdge service. However, users can change the settings at any time.
Note: The forwarding phone number must be permitted by your outgoing calling plan.

You can activate or change the phone number for this feature on the VoiceEdge portal, or by using Feature Access Codes on your
device.
To activate or change Call Forwarding Not Reachable online:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, click “Feature Settings”.
3. Select “Call Forwarding” to display the forwarding options, and scroll to Call Forwarding Not
Reachable.
4. Enter or change the telephone number that you want calls routed to in the case of your
business line not being reachable. This could be a cell phone, a home phone or an alternate
business location.
5. Click “Save”.
6. Call Forwarding Not Reachable has now been updated. All incoming calls will be routed to the number you entered if your phone
device should become unreachable.
Feature Access Code activation of Call Forwarding Not Reachable:
1. Lift the receiver and listen for the dial tone.
2. Press .
3. A menu of options will guide you in managing this feature. The prompts will enable you to activate and deactivate the feature as well
as add and delete the numbers on your list.
To deactivate Call Forwarding Not Reachable:
1. Lift the receiver and listen for the dial tone.
2. Press .
3. When prompted, press to turn the feature off.
Note: When entering the “forward to” number, remember to dial 1 and/or the area code before the number if it’s necessary to place the call. When creating your list, enter
the area code plus the 7-digit number for both local and long-distance numbers.

End User 25
Comcast Softphone
The Comcast Softphone is a powerful desktop application that, when integrated with Business VoiceEdge service, is a feature-rich
communications tool available with the Unified Communications seat. The Softphone allows a user’s computer to act as their work
telephone, whether in the office or traveling. The Softphone is ideal for a remote office user or a secondary device for someone
frequently on the go.
The Comcast Softphone User Guide is available online at business.comcast.com/getstarted.
System Requirements
PC Requirements
Processor Minimum: Pentium 4® 2.4 GHz or equivalent
Optimal: Intel Core 2 Duo or equivalent. Video card with DirectX 9.0c support
Recommended to support HD video: Intel Core 2 Duo or equivalent with minimum 3.0 GHz, or a triple-
or quad-core processor; Video Card with DirectX 9.0c support
Memory Minimum: 1 GB RAM
Optimal: 2 GB RAM
Hard Disk Space 50MB
Operating System Microsoft Windows XP Service Pack 2
Microsoft Windows Vista, 32-bits and 64-bits arch
Microsoft Windows 7
Connection IP network connection (broadband, LAN, wireless); Constant Internet connection
Sound Card Full-duplex, 16-bit or use USB headset

MAC Requirements
Memory Minimum: 2 GB RAM
Hard Disk Space 100 MB
Operating System MAC OS 10.5 or above
Connection IP network connection (broadband, LAN, wireless); Constant Internet connection 2 MBps is
recommended for HD Video connection

Multimedia Device Requirements

The Softphone requires both speakers and a microphone to make calls. Any of the following configurations are acceptable:
• External speakers and microphone
• Built-in speakers and microphone
• Dual-jack multimedia headset
• Bluetooth® multimedia headset
• USB multimedia headset
• USB phone
Calls made with the Softphone will work without a video camera, but a video camera is necessary to allow other parties to see your
image. The Softphone will work with most USB video cameras.

End User 26
Login
Installation and First Time Login
1. Login to business.comcast.com/bveportal, and click the “Downloads” tab.
2. Click on the link for the appropriate Softphone - either Windows or MAC. If the Softphone
downloads do not appear on the download page, please call our support group at 877-761-
7401.
3. Select “Run”, and select “Run” again.
4. Select the language from the pull down list (English is the default).
5. Click on “Next” on the install wizard.
6. Read and check your acceptance of the terms of the end user license agreement, then click
“Next”.
7. On the Destination Folder, accept the Destination
folder provided:
a. Select “Create a shortcut for this program on the desktop” if you’d like an icon on desktop
to launch the program.
b. Select “Launch this program when Windows starts” to have this program run every time you
log into Windows.
c. Select “Create a shortcut in Quick Launch” if you want this available in the “Start” menu.
8. Select “Next” to continue installation when you have completed your selections.
9. Click “Install” to begin the installation process.
10. Click the “Finish” button to complete installation. Locate the Softphone on your desktop with the following icon .
11. The first time you login, in the username field enter your username which is your portal login with the following appended to the
username: @bve.wdv.comcast.net (For Example if your portal login is 630432331 than your Softphone login will be 630432331@
bve.wdv.comcast.net. Your password will be the same as your portal password).
12. In the Password field enter the password.
13. To have your computer remember your username and password select “Remember login information”.
14. To have your computer automatically login and launch the application, check “Log In Automatically”.
15. Press the Login button.

Softphone Basics

Softphone Menu

Call Panel

Dial Pad

Additional Panel Selections

Detach Panel

Call History

End User 27
Placing a Call
There are many ways to place calls using the Softphone.

Method Where Instructions

Dial a Number Call Panel Dial Pad 1. If the Dial pad isn’t visible, press “Show or Hide Dial pad” button to view dial pad
.
2. Use the Dial pad to enter in the extension or the ten digit number and press the
call button.
Key in a Number Call Panel 1. Type in a number using your keyboard and press “Enter”.
2. To make a video call select the call options in the call button.
Drag and Drop a Address Book Contacts, Drag an entry from the address book tab into the call panel and the call shall be
Contact History and Favorites placed immediately.
Double Click a Contact Addres Book Contacts 1. Double-click on the name to immediately place a call in these tabs.
2. Alternately, right click and select video or audio call from the menu.
Click a Number Call History, Group Directory Click the underlined number to immediately place a call.

Placing a Concurrent Call

If you want to place a concurrent call while you have an active call, just dial another number and the first call will be put on hold and the
new call will dial out.
Ending a Call
Press the red “End Call” button on the call panel.
Answering a Call
The Softphone must be running to answer incoming calls. When the Softphone rings a box alerts you of an incoming call, with this box
you can accept to answer or decline the call. Declining the call will treat the call like an unanswered call (for example it will send the call
to voicemail if you have a voice mailbox).
Auto Answer
If you select Auto Answer from the More Call Options Menu then the Softphone will automatically answer and connect you to any
incoming calls. An icon will appear on your Softphone under the More Call Options menu that looks like this:

More Call Options Menu

The auto answer feature is automatically turned off when you shut down or log off, you’ll need to manually turn it back on each time you
log back in.
Controlling Calls
Raise or Lower Volume
Click on the volume icon on the active call and either drag the volume up or down or use the arrows on your keyboard.
Mute the Call
Click on the microphone icon to mute your voice on the call.
Turn On/Off The Speakerphone
If your computer is equipped with a speaker phone, click the speaker icon to turn on or off.
Hold call
To hold a call click the “Hold” button, the call information will then be minimized within the Softphone, to unhold the call click “Resume.”
Add a Contact
Click the yellow plus sign next to the active calling party’s name to add them to your contact list. A dialog box will appear to allow you
to add additional information.
Transfer a Call
Click on the call transfer button to transfer a call. Clicking on this icon will put the caller on hold and change the window to allow you to
enter in the party to transfer. There is a box to enter in a phone number or drag a contact into the box.
Note: Click to dial in your group directory will not work as a transfer address, you’ll need to enter in the number in the transfer box.

End User 28
Consultative Transfer
Click the “Call First” button when the call is connected and you will be able to tell the person who you are transferring to who the party
is you are transferring. When you are ready to transfer the call then hit the “Transfer Now” button and the two parties will be speaking.
Note: Your calling line ID will be delivered to the party you are transferring to. Press “Cancel” to stop the transfer and then you can reconnect with the original party.

Blind Transfer
A blind transfer will allow you to transfer the call to the other party without speaking to that party first. The calling line ID information
will show up as the transferred party when you use this capability. Click the “Transfer” button as described above and populate the
number you are transferring to. Click the arrow next to the green box that is populated as call first and select Transfer Now, which will
automatically send the call and end your call with the transferred party.
Three-Way Calling
To add another caller onto an existing call for a three-way call, in the bottom right corner click the arrow and select “Invite to
Conference Call”.

A dial box will show up where you can either drag a contact to the box or type in the number.
When your three-party call is established your Softphone will show Conference Call: 3 Participants and list those whom are on the call
in the active call window.
Merging Two Active Calls
If you have two active calls (with one on hold) use the call options in the lower right hand corner and select merge calls, and it will allow
you to merge the two active parties into a three-way call.
Splitting a Three-Way Call
Click the arrow next to any participant and it will allow you to split the call or end the call with both parties. Upon splitting, one party will
be active and the other will be on hold.

End User 29
Voicemail
If your service includes voicemail, then when you have voicemail messages, an envelope icon will appear near the top of your
Softphone and will indicate the number of voice messages you have. Click the icon to automatically connect to voicemail to listen to
your messages.
Note: To enter in your passcode for the voicemail system you must click in the call status window prior to entering in your passcode.

Adding Video to Your Call

Either you or the other party can add video to your active call at any time during the call. To add video click the “Start Sending Your
Video” button. This will send your video to the other party (if they have video capability). A video panel will open and show the video
being sent in the corner and if the other party is sending video they will be in the larger image. The video panel is separate from the
Softphone panel.

Pausing and Resuming Video

To pause or resume video, click the camera icon to stop sending your video.

End User 30
Reception Console
The Reception Console is a software based platform that allows your receptionist or office manager to manage calls with ease.
This is an additional service that is provided in conjunction with Business VoiceEdge. This section includes information to get started
with the Reception Console tool. For more detailed information, please also download the Reception Console user guide at
business.comcast.com/getstarted.
Launching Reception Console for the First Time
The Reception Console is launched directly from the portal; therefore, there is no need to distribute the application for installation
on end-users’ PC. When initially launched, a desktop icon as pictured below, is created for convenient access to the application.

1. Log in to the portal account associated with the Reception Console software. Typically, this is the account of the main line or
reception end user, and you will use the same user credentials provided in the Welcome Letter for that user.
2. From the Main Navigation Page, click on “Downloads” and then the Reception Console. Reception Console will start and you are
automatically logged in.
Accessing Reception Console via Desktop Icon
After the initial launch, you will have a Reception Console icon on your desktop. You can access the Reception Console by double-
clicking the shortcut on your desktop or by selecting it from the Start menu.
1. Click the Reception Console shortcut. Reception Console starts and you are presented with the following login interface:

2. Enter your username and password.

Note: You can also select the Remember Me (or Forget Me) and the Remember my Password options so that your username and password are remembered on your
computer, and therefore you will be auto-logged in.

3. Click “Sign In”.

Reception Console Overview

1 2 3

4 5

The Reception Console interface contains the following work areas:

1. Switchboard panel
2. Company Notes and Profile area

End User 31
3. Queue panel
4. Contact Directory panel
5. Alphabetical Index filter
6. Options panel
7. Control panel
Receptionist Monitored Users
To select the users to monitor their phone status on the Reception Console, use the process below.
To set up Receptionist Monitored Users:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, select “Feature Settings”.
3. Click “Advanced Settings”.
4. Next to Receptionist Monitored Users, click “Show more”.
5. Check the box next to the users that you want to monitor their status.
6. Click on “Add People”.
7. Click “Save”.

Managing Calls with Reception Console

You manage calls using a combination of the panels in a top to bottom workflow style. You should be able to distribute calls using this
workflow for most of the common activities.
For more information about the user interface please see the full Reception Console user guide at business.comcast.com/getstarted.
System Requirements
Processor Minimum: Pentium 3® 1.2 GHz or higher or compatible CPU
Memory Minimum: 512 MB of RAM
Hard Disk Space 60MB
Additional Recommendations Video graphics card with minimum of 8 MB of RAM
Super VGA monitor (15 inches or larger)
800 x 600 screen resolution minimum
Software Requirements Windows 2000 with SP4 (or higher), Windows XP, or Windows Vista
Sun Microsystems 32-bit Java Runtime Edition, Version 6 Update 23, or later
Outlook 2000 SP3, 2002/XP SP2, 2003, 2007 (required for Outlook contact directory)
Microsoft Excel (Optional)
Flash Player 9 Runtime (ActiveX Control)
Note: Reception Console is compatible with Java version 6, and may have issues prior to Java version 7 update 11.

Additional Business Voice Continuity Features

In addition to Call Forwarding Not Reachable, there are several other features that help ensure your business voice continuity. Options
may include:
For Users with Voicemail:
• Voicemail to Email Integration: Receive voice messages in your email inbox on your computer or handheld device as a WAV file.
• Message Notification: Receive a short email message informing you that a message has been left, with the date and time the
message was sent.
For Unified Communications Seat Users:
• Call Forwarding Selective: Automatically forward calls based on incoming call number, time of day or day of the week.
• Call Notify: Send an email with the caller’s name and number to a specified email address when predefined criteria such as phone
number, time of day or day of the week are met.
• Be Anywhere: If your main line, hunt groups or first responders are not answered by a set number of rings, ring alternate numbers
simultaneously to ensure calls are not missed.
• Sequential Ring: If your main line, hunt groups or first responders are not answered by a set number of rings, ring alternate numbers
sequentially to ensure calls are not missed.
To manage these features through the VoiceEdge portal, log on to business.comcast.com/bveportal.

End User 32
Privacy
Caller ID Blocking per Call
You control when your business name and number appear on Caller ID. Caller ID Blocking enables you to block your business
name and number from appearing on select calls you place. You may also want to employ Caller ID Blocking per Line so that EVERY
call from a specific line is anonymous.
To use Caller ID Blocking per Call:
To ensure your business name and number are marked “Private” or “Anonymous” on select calls:
1. Lift the receiver and listen for the dial tone.
2. Press .
3. When you hear a second dial tone, dial the number you wish to call.
4. Your business name and number will be blocked for the current call only.
Note: Caller ID Blocking per Call may not be available on some calls, including calls to 911.

Caller ID Blocking per Line

Caller ID Blocking per Line ensures that your business name and number are marked “Private” or “Anonymous” on ALL outgoing calls
on a specific line. Some clients and businesses may reject incoming calls that are marked “Private” or “Anonymous”, and, in these
instances, you can temporarily cancel Caller ID Blocking per Line to enable you to call those numbers. Your Caller ID Blocking per Line
function is automatically restored for the next call.
To activate/deactivate Caller ID Blocking:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, click “Feature Settings”.
3. Click the “Privacy” tab.
4. Click to toggle Caller ID Blocking “On” or “Off”.

To cancel Caller ID Blocking per Line from your phone:

1. Lift the receiver and listen for the dial tone.
2. Press .
3. When you hear a second dial tone, dial the number you want to call.
4. Your business name and number will appear on your party’s Caller ID display for this call only.
Anonymous Call Rejection
Anonymous Rejection announces to callers who block the display of their name and number that you are not accepting anonymous
calls and instructs them to unblock their information and dial you again.
To activate/deactivate Anonymous Rejection:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, click “Feature Settings”.
3. Click the “Privacy” tab.
4. Click to toggle Anonymous Call Rejection “On” or “Off”.

Privacy 33
Barge In Block
Barge In Block allows you to prohibit others from interrupting your conversations by entering your calls.
To activate/deactivate Barge In Block:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, click “Feature Settings”.
3. Click the “Privacy” tab.
4. Click to toggle Barge In Block “On” or “Off”.
Directory Privacy
Turning on Directory Privacy will exclude your name and number and other contact information from the company directory which can
be accessed through the user portal, toolbar and softphone.
To activate/deactivate Directory Privacy:
1. Log on to business.comcast.com/bveportal.
2. From the Main Navigation Page, click “Feature Settings”.
3. Click the “Privacy” tab.
4. Click to toggle Directory Privacy “On” or “Off”.

Privacy 34
Index
3–Way Calling 29
Alternate Numbers 18–19
Anonymous Call Rejection 33
Automatic Callback 20
Automatic Hold and Retrieve 20
Barge In Block 34
Basic Call Logs 19
Be Anywhere 9, 15–17
Busy Lamp Field 19
Call Forwarding Always 21
Call Forwarding Busy 21
Call Forwarding No Answer 21–22
Call Forwarding Not Reachable 25
Call Forwarding Selective 22
Call Notify 23
Call Queue Agent 25
Call Transfer 28
Call Transfer with Consultation 29
Call Transfer without Consultation 29
Caller ID Blocking per Call 33
Caller ID Blocking per Line 33
Click to Dial from Microsoft Outlook 18
Directory 24
Directory Privacy 34
Distinctive Ringing 23
Diversion Inhibitor 16
Do Not Disturb 15
Extension Dialing 6
Greetings 12
Hoteling 23–24
Multiple Call Arrangement 19
Placing a Call 6, 28
Polycom® IP Phones 5
Push to Talk 20
Reception Console 31–32
Remote Office 18
Sequential Ring 22
Services Menu 15
Shared Call Appearance 19
Softphone 26–30
Speed Dial 7–8
Telephony Toolbar 6–7, 13–14
Voicemail 6, 10–12

© 2015 Comcast. All rights reserved. BC BVE POR_EndUser_Rev. 02.15

Index 35